2 external monitors on new 27" thunderbolt iMac

I have bought one of these new 27" thunderbolt imac. Is it possible to use both thunderbolt ports to connect the iMac to 2 external monitors?
I mean, working with 3 monitors?

In theory.  Note there may be limitations imposed by the GPU, which are in the specs:
http://www.apple.com/imac/specs.html
Any of those limits may be able to be overcome to some extent by devices by:
http://www.matrox.com/
Although I've heard their devices can be slower than machines that have the GPUs to support additional displays.
Message was edited by: a brody - corrected spec page

Similar Messages

  • 2 external monitors on new imac

    Hi,
    I just bought a new imac a month ago. I was wondering if it is possible to use 2 external displays?
    I would like to put one left, and one on the right.
    So i'ld have the following setup:
    left: External TFT (DVI-VGA possible)
    center: imac display
    right: External TFT (DVI-VGA possible)
    i've been able to add one external screen (using the miniDVI connector), but since there is only one such connector, i am stuck.
    Somebody knows if this is even possible?
    If so, any help would be appreciated

    I already knew about Matrox, but i only see configurations with the 2 monitors set one next to the other.
    here you can see why that is
    http://www.matrox.com/graphics/media/common/dh2go/displaypropertiesspace.gif
    the problem with this is, that i would like to put the imac between the two monitors.
    something like this (don't mind the monitors. The picture is just a random pick from google)
    http://gandini.unm.edu/pgpages/Interests/Images/Computer/A2273Triptych.jpg
    thx so far

  • External Monitor with new IMac

    I just purchased the new 21.5" IMac, and want to connect an LG 23" to extend the desktop. the LG has DV-D, D-SUB, and HDMI ports. This may be a really stupid question, but which port on the Imac do I need to connect to?  Thanks.
    JS

    Well the new iMac has mini-display out. You can use the fallowing adapters with the iMac:
    Mini-Display To HDMI:
    Griffin Mini DisplayPort to HDMI with Audio + DVI
    Kanex Mini DisplayPort to HDMI Cable with Audio Support (10 ft.)
    Belkin Mini DisplayPort to HDMI Adapter
    If by D-SUB you mean VGA:
    Mini DisplayPort to VGA Adapter
    If by DV-D you mean DVI-Digital:
    Mini DisplayPort to DVI Adapter
    or the already listed above, Griffin Mini DisplayPort to HDMI with Audio + DVI
    If you want to use HDMI input, and you don't have a DHMI cable, the Kanex  is adapter is a cable. Witch could save you some money. If you go with another HDMI adapter you may want to pick up a Apple HDMI to HDMI Cable (1.8 m)
    The griffin adapter dose both HDMI and DVI. WItch makes it a more versatile adapter.
    One of the advantages of HDMI over DVI is that HDMI supports video & audio over a single cable. But if your Display has limited set of HDMI cables, you may want to save the HDMI ports for some thing that requires HDMI, Like a blueray player.
    DVI supports some larger resolutions. And if you want to use it for a computer display that could be an important advantage.

  • Can I use 2 external displays on new mid 2011 iMac?

    I'm thinking of getting the new 27" iMac with the 2GB video card. It lists in the tech specs two thunderbolt ports and a mini display port, but the images only show the two thunderbolt ports, so I assume Apple is counting one of those as being the dedicated mini display port. I'd like to be able to use an additional two external displays with this iMac, though one extra would be fine. I see on the video card manufacturers website, they say it can "theoretically" drive 6 displays, depending on output ports. Is this like on the Mac Pro tower that can drive 6 displays (3 displays from each video port, assuming you have 2 video cards)? Can the iMac drive 3 displays (internal and two external) off it's video port with the proper adapters, i.e. dual link dvi adapter, or just one extra external monitor? I'd be satisfied with one extra display, but being able to add a 2nd would be a nice help in Photoshop since the iMac doesn't have the anti-glare option like on the laptops. I'd like to keep the second thunderbolt port open for the upcoming thunderbolt raid storage enclosures. Thanks all for any help and information!

    Thank you, I have read that I could daisy chain the HD RAID enclosure on one of the thunderbolt ports with another monitor, if the monitor were at the end of the chain, but I do not know if the other port would still simultaneously support yet another external display at the same time.

  • External Monitor vs just adding an iMac? Crazy or what?

    I had posted an earlier question about an additional 2nd external monitor and received several responses that led me back to an Apple Cinema Display. I thought about that but because it was a matte finish versus a glossy finish it wasn't going to achieve the objective of matching my glossy finish on my MacBook Pro.
    So, here's a thought. Given the cost of the 20" ACD, for a few hundred dollars more I could get a 20" iMac. As a bonus, you do get a second computer, a super combo drive, a cool new keyboard and mighty mouse. Crazy or what?
    Now, the question. Since I am networked, is there a program that will allow me to use the iMac as a monitor slave? If so, has anyone used and had any experience doing so? Not that it's that big of a deal because I am setting up the two Macs to mirror one another; at least for shared documents.
    Which leads me to my second question. Since I am only sharing "Documents", and I am networked, what is the best way to handle this?
    Thanks as usual for everyone's fine support and contribution.

    RE: +Since I am networked, is there a program that will allow me to use the iMac as a monitor slave?+
    http://www.screenrecycler.com/home.html
    RE: Synching 2 macs
    http://www.qdea.com/pages/pages-syncx/syncx1.html
    http://www.freedownloadscenter.com/Utilities/FileSynchronizing_Utilities/QuickSync__For_MacOSX.html
    Hope this helps...

  • Is there a way to connect and view an external monitor only on my Intel iMac?

    I have an Acer 15.6" monitor connected to my Intel iMac via VGA cable and Mini-DVI to VGA adapter. I am running Lion (V10 7.3) and would like to direct my image to the external display only. The preferences pane does not offer that option. Is there some way to do it?

    Do you have a desktop machine running iTunes?
    If so then yes, setup home sharing and you can stream anything in your iTunes library to your iPad.
    It works good.

  • External Monitor for New MacBook pro

    Can someone tell me what kind of external monitor and mouse I need for my new mbp 13" running the lion os x?  I bought this little screen thingy and I cant half see it. 

    Yes, it's possible to run an external monitor — all MBPs can do that. You can use any monitor and almost any widely available USB or Bluetooth mouse or trackpad, though I highly recommend Apple's own Magic Trackpad.

  • Trouble connecting external monitor to new MacBook

    Just today I bought a new MacBook with Leopard, and also bought an external monitor (LG brand). I hooked it up as directed: an adapter from the mini-dvi port to a dvi cable, and the other end of the dvi cable in the back of the monitor. When I turned it on, the monitor was displaying the background picture on my desktop and the dock, but none of the folders and documents on my desktop were showing. Also, the cursor wasn't showing. I tried opening a document in Word, and that did not show up on the monitor. I called the company and they said the monitor should work with a Mac, but that I should get help from Apple because none of them are familiar with Macs and it is probably something I need to change in the display settings on the MacBook. I've never used an external monitor before, and know nothing about this. Do you think I need to return this monitor, or could someone tell me what to try to make it mirror the desktop? Thank you.

    Your monitor is working exactly like it is supposed to in extended desktop. Nothing will be on it unless you drag something to it. Open Displays in *System Preferences*. With the external monitor hooked up a control screen for each display will show on the displays. Use Arrangement to drag the external to whichever side you want to have it on. I use mine on the left so my mouse enters the screen in the correct side. You can also use the external in mirrored mode where everything is the same on both monitors. The easy way to switch between mirror and extended is the F7 key.

  • External Monitor Question - New User W510 (old Guy, Limited Skills)

    Good Afternoon,
    I have a new Thinkpad W510 for work.  When I hook my external mmonitor to the system, I can get it to display just fine.  However, when I close the lid top the actual Laptop, the system blanks out the external monitor.  My Toshiba Laptop never dis that (ran on XP Professional).  Is there something I can do to prevent this from happening?  Some setting?  Thank you for any help.
    Moderator edit: Masked members email address to prevent spambots from getting it.

    Yes. I'm assuming the computer is set to sleep when the lid is closed.
    Go to the Start menu and search up "Power Options".
    Then, in the sidebar, select "Change what closing the lid does" and for both battery and AC power, select "Do Nothing".

  • I have a external monitor, a new samsung 1920x1080 60hz, and it's bee fine until I had to unplug it an hour ago to move it. But connecting it back up to my mac has produced one problem, it no longer displays at 1920x1080, only 1600x900.

    It won't even let me select the highest resolution it should offer, the option doesn't exist in the scroll menu. But the weirdest part about this is, if i mirror my mac screen onto the monitor, it gives me the option to view both screens at full 1920x1080 resolution, and it does show them both, the same screen, perfectly, until I stop mirroring, whereby it goes back to 1600x900 and won't let me choose any higher. So the external monitor can show this resolution but just won't. Any help would be great thanks.
    FYI. I'm using a firewire/hdmi cable, so it should be full HDMI output

    Repair your disk permission: http://bit.ly/OeD7U3.
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website www.lexmark.com
    Run firmware update http://bit.ly/AcNqbg
    Reset printing system http://support.apple.com/kb/HT1341

  • HT3924 I can't get my iMac 27" 2009 Mini DisplayPort to work as external monitor for Macbook Air Thunderbolt...

    I am using a Mini DisplayPort Cable from iLuv as the connector between them. Upon connecting the cable or hitting Command/F2 on the iMac, the iMac will go blue followed by the Macbook Air, then both will flicker and usually the iMac reverts back to its native screen and NOT display the Air's. Or sometimes the iMac will go black while the Macbook Air becomes very slow and choppy, and while selecting the Gather Windows option in the display window in Settings will show the Imac display window, I can't really do anything with it. I even tried switching the ends of the cable to see if that would help, but it didn't. Advice?

    Welcome to the wonderful world of copy protection.
    Your display may not be on the "approved" list, or was removed from it.
    Apple's Mac lines includes a form of digital copy protection that will prevent protected media, such as DRM-infused iTunes movies, from playing back on devices that aren't compliant with the new priority protection measures.
    The Intel-developed technology is called High-bandwidth Digital Content Protection (HDCP) and aims to prevent copying of digital audio and video content as it travels across a variety of display connectors, even if such copying is not in violation of fair use laws.
    Among the connectors supported by the technology are the Mini DisplayPort found on Apple's latest Macs, in addition to others such as Digital Visual Interface (DVI), High-Definition Multimedia Interface (HDMI), Gigabit Video Interface (GVIF), and Unified Display Interface (UDI).
    Apple has apparently acquired a license for the technology and is now using it across its lines to to prevent transmission of purchased iTunes content (and some DVDs) to devices that don't include support for HDCP.
    The problem can often be solved by using an HDMI to Component Video adapter.  Many believe that Component Video will give you a better HD picture than HDMI without any of the hassles of HDCP.
    Generally try to avoid using HDMI.   When able, use Component Video.  With Component Video you get full HD quality and you will never have HDCP hassles (which of course is why Hollywood wants to ban it).
    However sometimes a display can be HDCP certified and then later be removed from the certified list. So purchasing a new display may not be a permanent solution.

  • Can older dual core iMac be external monitor to new (lion) imac

    If yes, how do they need to be connected and configured?

    Thanks, classic II for the reply.  You are right--I should consider configuring my old Mac to be a wireless device if/when I get a new iMac, however I still would need my flash drive to have embroidery designs on it in order to get the designs into xp under bootcamp.
    It was painful for me to get my dual core iMac upgraded to 1 meg for snow leopard.  I could drive 50 miles to an authorized apple person, leave my iMac and he would order and install the 2 gig memory and in addition charge me $300 to fix the cd drive that was barely off warranty or do what I did.  Local apple store would install a half Meg of memory but couldn't do the ordering.  So I ordered 500 meg memory from on line apple store, had it shipped to my house, and then had apple store install it--to get me to 1 Gig, so I could install snow leopard--I think the apple store installed it for no charge since I ordered the memory from on line apple store, and didn't have to drive 50 miles, one way--twice.
    What I have is working for me, so I guess I'll just watch what happens with lion and icloudI and apple tv (and bernina v6 software which only runs under windows7 on macs) and move on to new iMac when things are settled.

  • Lion and Multi-Display (2 external monitors + built-in Display) [Thunderbolt, USB adapters/eVGA UV+]

    Hi everyone,
    I just completed an upgrade to Lion and while I love it I've suddenly found myself short 1 display. I use 2x24" with my MacBook Pro - 1 via mini Display Port [the Thunderbolt port] and another via an eVGA UV+ [both displays have a resolution of 1920x1080].
    There are two things that I am wondering about:
    Has anyone else who's upgraded found their UV+ adapter to be useless all of the sudden? I'm contacting eVGA to find out how soon we can expect a functional OSX 10.7 Lion driver for that but in the meantime...
    Has anyone heard anything of a Thunderbolt splitter "adapter" - it is obvious that you can have 2 displays chained to a MacBook Pro, as long as both of these displays are of the Thunderbolt Cinema Display variety ... seeing as I don't have two grand and already own 2 smaller monitors that I'd been using with Snow Leopard for quite some time now I was curious if there's just a way to ditch the USB adapter and just have the Thunderbolt port on my 2011 MBP drive both displays (I am fully aware that the GPU is capable of it but have yet to find a hardware display port or thunderbolt cable that splits in 2 so I can just hook each display into it and call it a day).
    Thank in advance to anyone and everyone who provides any information related to that stuff as I'd greatly appreciate your help ... once you're used to the extra screen real estate going down from 3 screens to 2 can be pretty painful.
    On that same note a general observation about Lion is that while I love full-screen apps I'll barely ever use them whenever I have external displays hooked up as Lion seems to insist on making the full screen app go to the primary display while completely blocking off the secondary display (rendering it useless). Hoping that Apple will make the UX for mulit-display folks nicer someday, I know their focus was just to release Lion now but there's absolutely room for improvement as far as that goes.
    Thanks in advance to anyone and everyone who responds to this post!

    nickdotvr wrote:
    Turns out that's not truly the case - see http://www.macrumors.com/2011/09/16/apple-thunderbolt-display-with-multiple-moni tors/ for details but the short of it is that if you just get one and plug in a Display Port Monitor you won't get that extra screen real estate after all.
    Yes... the actual marketing 'statement' says you are unable to connect the mDP display "directly" to the back of the new TB display.  Yes...
    But... from what i hear...  if you have some other TB display "directly" connected to the downstream of the TB display, you can 'then' add your older mDP display to the chain at that point.  You just can't have the older mDP directly to the new TB display.
    And this still stands true if you read previous info from Apple website.  It's all about the wording...
    So basically, you should still be able to have your MBPro + New TB display + (some other TB device w/ 2 ports) + old mDP display.

  • External monitor with new mbp 13"

    Hello I've a issue with my new macbook pro 13" (i5,8go,SSD). I have a external 27" monitor yiiama B2776HDS-B1 who was working fine with my macbook pro 13" 2010 running on snow leopard. But with my new one, I've got a black border on each side of the screen with the same resolution (1920x1080) used with my old macbook. My macbook is linked with a vga cable and a apple mini display adaptator.

    Well the new iMac has mini-display out. You can use the fallowing adapters with the iMac:
    Mini-Display To HDMI:
    Griffin Mini DisplayPort to HDMI with Audio + DVI
    Kanex Mini DisplayPort to HDMI Cable with Audio Support (10 ft.)
    Belkin Mini DisplayPort to HDMI Adapter
    If by D-SUB you mean VGA:
    Mini DisplayPort to VGA Adapter
    If by DV-D you mean DVI-Digital:
    Mini DisplayPort to DVI Adapter
    or the already listed above, Griffin Mini DisplayPort to HDMI with Audio + DVI
    If you want to use HDMI input, and you don't have a DHMI cable, the Kanex  is adapter is a cable. Witch could save you some money. If you go with another HDMI adapter you may want to pick up a Apple HDMI to HDMI Cable (1.8 m)
    The griffin adapter dose both HDMI and DVI. WItch makes it a more versatile adapter.
    One of the advantages of HDMI over DVI is that HDMI supports video & audio over a single cable. But if your Display has limited set of HDMI cables, you may want to save the HDMI ports for some thing that requires HDMI, Like a blueray player.
    DVI supports some larger resolutions. And if you want to use it for a computer display that could be an important advantage.

  • How do I use an external monitor with 21.5 inch iMac?

    I have a brand new 21.5 inch iMac and am trying to hook it up with an older 20 inch Mac cinema via Thunderport. Do I need a special cable. I saw none at my local Apple store. or will it work at all?

    Use a Mini DisplayPort adapter for that monitor type.
    (59966)

Maybe you are looking for