2 ipods on same computer not enough place in local disk c help

Hi,
My brother and i have 2 ipods and i created 2 differents accounts on my computer but when i tried to copy my library's music to my bro; my computer says error? And i only have half of a gig on local disk c.
Why doesn't my library can't export my library to his? Help please

I'm not sure you can "share" iTunes libraries. Most likely due to copyright laws.
Perhaps someone else knows more.

Similar Messages

"no photos were copied to the ipod because there is not enough free space"

i've been trying to download photos on my nano for weeks and i always receive this message :
"no photos were copied to the ipod because there is not enough free space on the ipod to hold your photos and albums."
the weird thing is that there IS free space; i actually made some (there are 18 available MB right now on my nano). and the folder containing the photos i am trying to download is far from 18 MB. but i still get the same message.
anyone knows what i could do?? thanks!!

R U sure you have enough space? Double check to make sure you are only trying to upload the pictures you want on your ipod not all the pictures on your computer (more than 18 MB).

Using two iPods on same computer

Our daughter has loaded her iPod onto our family computer and created an account. I now have my own iPod for which i want my own library, which will include photo's. How can I use my iPod and sync to my library without syncing to my daughter's.
I also need to download the library on my iPod onto my own library. I somehow had a library but it has been wiped clean due to a restore. Is there a way of reverse backing up from my iPod to my computer.

See this Apple KnowledgeBase article; it should help:
How to use multiple iPods with one computer
Is there a way of reverse backing up from my iPod to my computer.
Transferring tracks from an iPod back to iTunes has been covered here a number of times already, but again:
First, you need to prevent automatic synchronzation with a blank copy of iTunes. While connecting the iPod to the computer, hold down the Shift and Ctrl keys in Windows. This should stop the iPod from auto synching with iTunes and the iPod will appear in the source list. Wait until you are sure the iPod has mounted, and that it will not auto sync and then you can let the keys go. This may take between 3 and 25 seconds depending on your computer.
Then if you're using iTunes 7, you can then copy music that you purchased from the iTunes Store back to iTunes directly (use the Transfer Purchases From iPod command under the iTunes File menu).
If you're not using iTunes 7 or want to copy back other tracks, the easiest way will be to search VersionTracker for "iPod". You'll find a number of utilities that can transfer your tracks and your playlists from your iPod back to your PC.
It's also possible to do this manually, but the procedure is rather involved. If you're interested, though, see this thread:
MacMuse: Computer crashed
Hope this helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

HT1689 I am unable to sync my Ipod touch due to not enough space ? I delet bunch of podcasts from my ipod still not downloading ? help pl.

im unable to sync my ipod touch due to not enough space ? even after i deleted bunch of podcasts from it ? help pl.

- When you deleted them did the requested amount of storage space decrease?
- Try resetting the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- When you look at the colored bargraph of storage usage on the iPod in iTunes how much is taken up by "other". If greater than about 3/4 GB then restoring from backup usually reduced the "other".

Seperate libraries for two ipods on same computer

how can i set up seperate libraries for two ipods on same computer . running xp . after installing software for second ipod , i only have one version of itunes ,with only one library .tried setting up seperate playlists but that didnt help . thanks for help!

The only way I know to have two entirely separate iTunes libraries on one computer is to have two Windows or Mac user accounts: How To Use Multiple iPods with One Computer

How to sync 4 ipods on same computer

I'm trying to sync 4 ipods using same computer and same apple id.

Hello SuzyQ5253,
It sounds like you have two iPhones you want to sync them with one computer. I found an article with three ways you can go about doing this. I recommend picking the method that works best for you and following those steps:
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Thank you for using Apple Support Communities.
Best,
Sheila M.

I fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?

i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?

turnbui wrote:
i fitted new battery but it won't charge. when plugged into wall socket gets to itunes setup but no further. when connected to computer not enough battery to turn on to get into setup. Any ideas please?
It sounds very very much like the battery. You will need to have it replaced. If you put the failing one in yourself you will need to pay as your Warranty is now void.
Pete

Write: 0xecf6eb0, 4096: There is not enough space on the disk.

Our applications occasionally get the error in the function specified by set_errcall: "[prefix] write: 0xecf6eb0, 4096: There is not enough space on the disk. " Preceded by "DB00.db: write failed for page"
There most certainly is enough space on disk for one. In this most recent case, the Db::put's succeeded for a full hour before finally failing with an out of space error. At which point, I now have 30 log files and my own log files are filled with Berkeley error callbacks.
How come the set_errcall doesn't return an integer error code? If it did, we would be able to analyze that and decide any action to take. In this example, I might consider closing down all handles and checkpointing then removing logs since maybe the number of logs has gotten to large. Analyzing a string doesn't make sense since that might change with Berkeley versions.
Anyway, can anyone give any advice as to why we would get an out of space error (with plenty of disk space.) And also how to handle such an error.
Edited by: AMARCIONEK on Jun 3, 2009 10:10 AM

The platform is C++ API version 4.7.25 running on Windows Server 2003 Enterprise SP2. The database is on an NTFS disk. We have tested database files up to 20GB in size. The following is my config.
m_pDbEnvironment->set_cachesize(0, 10 * 1024 * 1024, 1);
m_pDbEnvironment->set_lg_max(20000000);
m_pDbEnvironment->set_lg_bsize(10 * 1024 * 1024);
m_pDbEnvironment->set_mp_max_write(4, 0);
m_pDbEnvironment->set_mp_mmapsize(2 * 1024 * 1024);
m_pDbEnvironment->set_mp_max_openfd(1);
// set the alloc methods into the environment
m_pDbEnvironment->set_alloc(QPRT_ALLOC, QPRT_REALLOC, QPRT_FREE);
m_pDbEnvironment->set_lk_detect(DB_LOCK_YOUNGEST);
m_pDbEnvironment->set_timeout(500000, DB_SET_LOCK_TIMEOUT);
m_pDbEnvironment->set_timeout(200000, DB_SET_TXN_TIMEOUT);
m_pDbEnvironment->set_flags(DB_REGION_INIT, 1);
m_pDbEnvironment->set_tx_max(5000);
m_pDbEnvironment->set_flags(DB_TXN_WRITE_NOSYNC, 1);
m_pDbEnvironment->log_set_config(DB_LOG_ZERO, 1);
m_pDbEnvironment->set_lk_max_lockers(5000);
m_pDbEnvironment->set_lk_max_locks(5000);
m_pDbEnvironment->set_lk_max_objects(5000);
m_pDbEnvironment->open((zKSz)sPath,     DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL |
                                   DB_THREAD | DB_INIT_TXN | DB_RECOVER | DB_LOCKDOWN,
                                   0);
We also checkpoint every 2 to 5 minutes with a 5MB threshold. We also explicitly call pDbEnvironment->log_archive(kpNil, DB_ARCH_REMOVE) after checkpointing.
Primary and (up to 4) secondary databases are opened with DB_CREATE | DB_AUTO_COMMIT flags.
I'd also appreciate any suggestions as to how to lower the memory footprint used by Berkeley. Ever since we've integrated this DB, our memory usage has been too large and inconsistent. There are 6 independent environments the product uses during runtime. Each of these environments have a primary database and (up to 4) secondary databases, which are all opened with DB_CREATE | DB_AUTO_COMMIT flags.
Just recently we have added a memp_trickle every 5 seconds at 40% (Anything lower and it has no affect in the environment, in other words, db_stat shows dirty pages forced from the cached instead of trickled.) We are trying to reproduce this issue at this point.

2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space

Hi Experts,
I am getting below error when Exporting data from my one web application to the Excel 2010 on Windows Server 2008 R2 ,
02/29/2012 18:54:50
Type : System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b11a5c481859e569
Message : -2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.
• To make more memory available, close workbooks or programs you no longer need.
• To free disk space, delete files you no longer need from the disk you are saving to.
The disk space is 30 GB free, I have cleared all the temp files, increased the virtual memory & internet temp files size to max but no luck

You want to use this one here - MMC
comexp.msc /32
THAT will launch the MMC process
as 32 bit then you'll the Microsoft Excel Application.
Right Click -> Properties.
What I did at this point was to select the Identity tab and then select "The Interactive User" (the default was "The launching user"). My app pool was already running as "LocalSystem". I believe by running it as the Interactive User now that it
has the right permissions to save workbooks.
Everything worked after this.
This was a tough one!
R. Matt Sampson

DPM is out of disk space for the replica. (ID 58 Details: There is not enough space on the disk (0x80070070))

I constantly get these message on laptop backup, what actually does it mean?
DPM is out of disk space for the replica. (ID 58 Details: There is not enough space on the disk (0x80070070))
I set automatic growth on protection group and there is plenty space.

Auto-grow Key Points
1.) Auto-grow needs to be enabled for the datasource.
2.) We grow the replica/recovery point volume by 10gigs or by 25% whichever is higher.
3.) To prevent race conditions, we do not grow within 15 minutes of the last growth.
http://social.technet.microsoft.com/Forums/ru-RU/6c70079e-6d90-42e2-89c4-9ddc7fcf11f4/dpm-2012-is-out-of-disk-space-auto-growth-does-not-work
https://blogs.technet.com/b/dpm/archive/2011/06/06/how-to-use-and-troubleshoot-the-auto-heal-features-in-dpm-2010.aspx
http://robertanddpm.blogspot.ru/2010/09/shrink-volumes-auto-grow.html
Have a nice day !!!

Not enough space on temporary disk error

Error Executing Database Query.[Macromedia][SequeLink JDBC
Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Not enough
space on temporary
disk. I am running CF MX 7 on Win2k3.
The only fix so far is to restart all the CF processes and
flush the Caching in Server settings in CFMX 7. Anyone have an idea
what is wrong?
Here is the error on all my webpages that execute a database
query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Not enough space
on temporary disk.

I totally understand your wish to get to the bottom of this!
There are a lot of factors that can be contributing to the problem
- the query itself, the number of users hitting the query, and the
tmp files internal to Access.
Make sure your query isn't returning very large recordsets
(e.g. all sales for all salespersons for all year.....). Even a
query with a moderate recordset return , hit by a large number of
users, can cause this sort of problem.
If you must use Access in production (which is NOT
recommended) your datasource settings should include:
Maintain connections across client requests be unchecked.
Limit Connections be checked and Restrict connections to be
set to 1
These settings should help prevent performance issues.

An error occurred while executing batch. Error message is: There is not enough space on the disk.

Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed deng

The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog)

Not enough space on the disk

hi all,
The DC gives "not enough space on the disk" error while building .
Any suggestions !
Regards,
MOhammad

hi
The DC gives "not enough space on the disk" error while building , this means
ask your BASIS consultant to remove the log files from the server node and then build the application
this would solve your problem , and your Basis consultant will be very well aware of this problem .
Thanks

Unable to create restore points not enough space on the disk. 0x80070070

When trying to create a restore point I get error "There is not enough space on the disk. 0x80070070" Which is wrong I have tons of space. How do I correct this problem. Thanks

chief444 wrote: When trying to create a restore point I get error "There is not enough space on the disk. 0x80070070" Which is wrong I have tons of space. How do I correct this problem. Thanks
Hello chief444, You might try going to this Link , and see if the information there is what you require.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Adobe flash player "Installation failed. Not enough permissions to write disk"

Hi there, my adobe flash player keeps on having issues. I downloaded the install file, open it and click install and it instantly fails and comes up with this message.
"Installation failed. Not enough permissions to write disk". Any ideas?

I think 2 options:
- try repair disk permissions
- try to do a flash clean install (https://forums.adobe.com/thread/1267823)

2 ipods on same computer not enough place in local disk c help

Similar Messages

Maybe you are looking for