2 login items started after cloning my HD, cannot be turned off

Ok so i copied my HD off onto an external disk, it booted fine, erased the internal drive and copied back (my machine was uber slow and the files had gotten so fragmented it was hindering normal usage and by coping off and back on the files get written together and are not fragmented. it did speed my machine up a lot so that part worked). after that both of the drives would boot and have preview and adobe fireworks open. preview would have a small swatch sample from an iWeb template in it and fireworks just opened. then i tried to erase my user folder and reload it from my TM back up (i didnt use my TM back up because a-i dont have my leo disk on me and b-it took my brother over 12 hours last week to restore from TM so i was skeptical of it)
neither are in log in items under account, i looked in all 3 of the libraries in the preference panes folders, launch agents, launch services, login items. tried looking at the launch processes via terminal and found nothing relating to it. i tried changing the names of the programs and moving them out of my apps folder. tried installing the 10.5.5 combo installer over my current 10.5.5, also ran applejack on the deep auto mode
and i also was able to confuse a tech (not hard) and an expert tech (now i feel accomplished)
i was told "o well then just do an archive and install and dont save the user preferences/folders" then what is the freaking point. they also told me to delete all my log in items that are in my sys prefs but its a system wide issue (made a new user and it happened) and also half of the helpers i have no way of knowing where the heck to look to bring them back in so i just skipped that because im pretty sure it wont do anything.
only thing i havent tried yet has been an SMC reset and pram reset but i doubt that will do anything but im going to give it a whirl for S's and G's
any ideas? its not hindering usability at all its just annoying and shouldnt be happening
-matt

Hi Terri 4514,
If you are having a "free space" alert when you try to sync, you may find the following article helpful:
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Regards,
- Brenden

Similar Messages

  • Unable to Login to OAM after cloning

    Hi,
    I am unable to login to OAM after cloning. I am getting the message "The page cannot be displayed" when clicking on OAM front end link.
    Application version: 11.5.7
    Message from the error_log
    /apps/ts2aps/product/iAS/Apache/Apache/logs > tail -100 error_log
    DBC file :Applications
    DBC file :Applications
    log Message called
    log Message called
    log Message called
    log Message called
    log Message called
    log Message called
    *[Mon Apr  5 00:44:20 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.*
    Please let me know for any other details.
    Regards,
    Mukarram

    http://<host_name>:32001/OA_HTML/jsp/fnd/aoljtest.jsp
    I am getting "The page cannot be displayed" for my hostname, after running the above URL.
    Error Message from error_log
    [Mon Apr  5 21:55:52 2010] [error] [client 64.100.24.42] client denied by server configuration: /apps/ts2aps/common_top/portal/oprocmgr-service
    [Mon Apr  5 21:55:53 2010] [error] [client 64.100.24.42] client denied by server configuration: /apps/ts2aps/common_top/portal/oprocmgr-service
    log Message called
    TransportAgentMain init called.
    Deug mode false
    Before loading jdbc drivers
    Before creating Connection Pool instance
    Setting INit Connections
    No of Connections to be created 5
    Connection no 0
    DBC file :Applications
    Connection no 1
    DBC file :Applications
    Connection no 2
    DBC file :Applications
    Connection no 3
    DBC file :Applications
    Connection no 4
    DBC file :Applications
    INit Connections done
    log Message called
    log Message called
    DBC file :Applications
    log Message called
    DBC file :Applications
    log Message called
    log Message called
    log Message called
    log Message called
    DBC file :Applications
    DBC file :Applications
    DBC file :Applications
    log Message called
    log Message called
    log Message called
    log Message called
    log Message called
    [Mon Apr  5 22:09:53 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
    Please let me know for any details.

  • Unable to remove login items (Revert after reboot) I am having issues and permanent encounter in having my removed login items reappearing after reboot.   Here's the steps I have taken: 1) Open Setting, Account Preferences, Click under an account, Login i

    Unable to remove login items (Revert after reboot) iOX10.5 iMac
    I am having issues and permanent encounter in having my removed login items reappearing after reboot. I have very MANY of the same programs in 'open at Login accounts' eg: Messenger,Safari,Skype,Evernote,Dropbox,antivirus, but they are listed dozens of times. in this 'open at login' area.
    Here's the steps I have taken:
    1) Open Applications, Account Preferences, cluck my administrator acc, select program to delete, click on - and wait.
    2) Remove some login items (with or without unlocking the lock, doesn't seem make a difference, tried both)
    3) Login items are now fewer
    4) Reboot
    5) voila, the removed login items are still loaded and displayed in login item tab.
    How does one solve this? Tried to google, but....

    Strange,but try these 2...
    AppDelete...
    http://download.cnet.com/AppDelete/3000-2096_4-10614485.html
    AppZapper...
    http://www.appzapper.com/

  • Iphone 4 music shuffle cannot be turned off. The shuffle is turned off on top of the page, shuffle on individual songs are turned off and the settings shuffle is turned off also, but the songs keep shuffling in my album. Please Help.

    Iphone 4 music shuffle cannot be turned off. The shuffle is turned off on top of the page, shuffle on individual songs is turned off and the settings "shake to shuffle" is turned off also, but the songs keep shuffling in my album. Please Help.

    The weird thing is that after I click shuffle when the random number appears, I click it to turn it off and then I click it on again and it works fine. Is this a glitch or a bug or am I doing something wrong? How do I fix this?

  • "Enable Rubber Band" for Pen Tool Cannot be Turned Off

    I don't like the rubber band preview when drawing using the pen tool, but I can't turn it off in the preferences. Anyone know of this problem? The check mark is there, but it cannot be turned off.

    I am having the same problem where it appears that the checkbox to disable this feature is mis-aligned. I have tried using the [tab] key but after the text field for the LIVE CORNER ANGLE it tabs to nothing, then to the options on the left...
    I have tried to change the resolution on the computer in hopes that maybe this would make that stupid check box "selectable"...  any other help would be GREATLY appreciated.

  • PAT cannot be turned off by a motherboard vendor

    I recently found this info:
    Quote
    Here is the information Intel has provided us and approved for release on 3dXtreme:
    PAT technology CANNOT be disabled in a 875P based motherboard running at 800MHz system bus with dual DDR400 memory. However if memory population increases to 2 DIMMs per channel, PAT is designed to balance maximum performance with robust operating stability, and you won't see the maximum benefits that PAT can bring to a single DIMM per channel environment.
    After some further inquiry we were provided with some additional information:
    PAT is hardwired within the chipset and cannot be turned off by a motherboard vendor. Certainly a motherboard vendor can minimize its benefits by setting inefficient memory timings, but not sure why they would want to do that. There is no way to test within Windows to see if PAT is enabled within the chipset. However companies with the right tools can check PCI registers to see if the motherboard vendor has optimized their own memory timings. I think this is the basic confusion, motherboard vendors are setting memory configurations in certain ways and then claiming they are turning on or off PAT. This is incorrect, all they are doing is optimizing or unoptimizing their memory performance. Trying to relate these BIOS switches to turning PAT on or off is incorrect.
    on http://www.3dxtreme.org/DFI_lanparty_p3.shtml
    I'm currently running a P4 2,8@3,25 with UltraFast RAM settings and Dual Channel DDR using a 66/33mhz combo. Sandra tells me PAT is disabled. Should I be worried about that or believe in what Intel says?
    -M3-

    Quote
    PAT technology CANNOT be disabled in a 875P based motherboard running at 800MHz system bus with dual DDR400 memory.
    Question: how about 801MHz ? 1000MHz? or 533MHz?  

  • I downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm

    i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi  i try all the ways to turn it on but it didnt sucsses

    roaminggnome 
      thanks for helping but i didnt know that is the downgrade is forbidden  and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> 

  • IPhone completely stacked - cannot even turn off

    I have had calendar sync problem for a long time. I removed iTune and reinstalled the latest version again. While I was trying to restore my iPhone hopefully to solve the sync problem, my iPhone was stacked. Right now, the apple mark appears on the iPhone and a timer (it's like an analog stopwatch) keeps moving (rotating). I cannot do anything. I cannot even turn off the iPhone. Can someone help? Do I need to run its battery out?

    I've had this problem as well. I can hold down the two buttons for 2 minutes and NOTHING WHATEVER HAPPENS!!! I've tried pressing them simultaneously, tried doing each one first before the other - etc. None of it works.
    It is simply impossible to turn my iPhone (1st gen, 16 MB) off. It just won't shut down. And since that is the standard instruction whenever anything goes wrong with the iPhone, it kind of leaves me stuck.
    So what on earth are you supposed to do IF THE DANG THING WON'T SHUT DOWN?????

  • I cannot not turn off my ipad or on there is a small circle flashing on the screen can anyone help?, I cannot not turn off my ipad or on there is a small circle flashing on the screen can anyone help?

    I cannot not turn off my ipad or on there is a small circle flashing on the screen can someone help?

    Try holding the power and home buttons for ten to fifteen seconds until the apple appears. If still bad, try a restore from within the computer&amp;itunes.

  • Iphone 4 music shuffle cannot be turned off. The shuffle is turned off on top of the page, shuffle on individual songs is turned off and the settings "shake to shuffle" is turned off also, but the songs keep shuffling in my album. Please Help.

    Iphone 4 music shuffle cannot be turned off. The shuffle is turned off on top of the page, shuffle on individual songs is turned off and the settings "shake to shuffle" is turned off also, but the songs keep shuffling in my album. Please Help.

    Hi Jennifer,
    Thanks for visiting Apple Support Communities.
    I'd suggest trying the steps in our iPad assistant first:
    https://www.apple.com/support/ipad/assistant/ipad/
    Regards,
    Jeremy

  • Concurrent Manager not starting after cloning

    Hi,
    I am not able to start concurrent manager after cloning the CM tier. I am gettiing below error in the manager log file,
    Could not initialize the Service Manager FNDSM_<Node name>_<Env>. Verify that <Node Name> has been registered for concurrent processing.
    Routine AFPEIM encountered an error while starting concurrent manager RCVOLTM with library /u01/app/hl.../...appl/po/11.5.0/bin/RCVOLTM.
    What might be cause of the error?
    Thanks,
    Prasad

    Hi Prasad,
    Using normal hostsnames or virtual hostsnames? Also did you experience issues during the dbTier clone (check all log files created even if the cloning did not error out)
    Possible the hostsnames in FND_NODES are not cleared properly during the DB clone
    Running the following might give a better result:
    1 - SQL> EXEC FND_CONC_CLONE.SETUP_CLEAN;
    COMMIT;
    EXIT;
    2 - Run AutoConfig on all tiers, firstly on the DB tier and then the APPS tiers,
    3 - check if the concurrent managers are starting.
    Regards,
    Ronald

  • User login items dissappear after shut down

    Ya i dont understand why it does this i load up a prog that i want to start on start up and after i restart it doesnt and i go back to the startup item page and its empty...i worked once but then the next time i started up it was gone. The only thing i think it cold be is that maybe it might dissappear after i have gone into windows and turned off the computer and then go back to apple later
    any ideas would be appreciated
    Andrew

    Hi Jayne, and a warm welcome to the forums!
    Has anybody else had access to your Mac lately?
    Have you tried your shortname & Password?
    If that doesn't work we may need to try this...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    Admin Hack...
    http://www.hackmac.org/?q=node/4
    Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

  • Safari, not a Login item, starts up automatically

    . . . with a blank page instead of the selected home page. The only Login items for my account are:
    AdobeResourceSynchronizer (with its "Kind" unrecognized)
    Dropbox
    Mouseworks Background (for an old Turbomouse)
    XPSLauncher
    This is my work machine and was recently upgraded to OS 10.6. The Safari automatic load issue may have started with the upgrade, but I'm not sure. There's no real productivity problem this is giving me. It's just annoying. If anyone knows what this might be related to, I'm much obliged.
    Rob

    Hello Mr Hemphill
    Thank you for such a speedy response, I see you have been very busy today.  I too use wi-fi, which connects instantaneously and therefore I do not accept this as a valid reason especially as I did not experience this problem with my old Mac which had quite a poor wi-fi service.  And even if it were to be the case those of us who do not have slow wi-fi connection should not be penalised for the sake of those that do - all they need do is not use this option for Safari. 
    When Apple Support told me that "this is as it should be" I asked why System Preferences allows Safari to be selected in the first place.  They had no answer.  I also note from previous discussions that this problem started long ago.  There must be a more valid reason.
    Best regards
    Marcus

  • After Effects & Premiere Pro CS4 users: Turn off "Make text and other items larger or smaller" (Win)

    I just made a brief blog post recommending that After Effects CS4 and Premiere Pro CS4 users turn off the "Make text and other items larger or smaller" setting in Windows 7, since it causes some problems.
    Please use this thread to let us know whether this solved a problem for you or whether there are any problems with this solution.

    There isn't really an option to "turn off" the feature. Do you mean to say that it should be set to "Smaller - 100% (default)"?

  • IPhone 5s starts over playlist every time car is turned off and one or gets unplugged from car stereo

    So I have a iPhone 5s and every single freaking time I turn the car off and then back on / or unplug the phone it starts playing music from the very first song alphabetically so basically what that means is every time I turn the car off and on the same stupid song plays every single freaking time I turn my car on!!!! I am ready to throw this phone like a frisbee over this. I play my music off of playlists I set up and I play them on shuffle but for whatever reason (now this didn't happen much in the past with my 4s, however towards the end of the 4s last couple months I had it... it was starting to get a little weird as well with where it stopped and started on the playlist when the car was turned off but nothing like this 5s) but with the new 5S every single time the car stereo get turned off and then on it does this.  I have a newer car stereo probably three years old with a USB sticking out of the front so you just plug the USB directly into the face and it goes straight in and should function in theory but this is crap. I use authentic Apple USB cables for the 5S but just cannot figure this out I've made sure I do not have repeat on I've turned shuffle off turn shuffle back on sync iPhone  etc.... what the heck s the problem? For such an expensive phone and a Supposed highly advanced technology by Apple this should be the last thing this phone should be doing. Is it the phone or is it the software whatever it is this is a serious problem for because when it comes to my music you don't mess with my music! I have mentioned this to other 5S owners and they have also experienced the same issue with their car stereos well. Why is it such a mind-boggling problem to just have the song play from where you left it? I thought maybe updating the phone with the latest and greatest software update with maybe fix the problem but no it didn't do a single thing. HELP!!!!! :(

    Status update: I tried my roommates iPhone five and I got similar results disappearing playlist when phone is disconnected or stereo is turned off in car, starts playing songs alphabetically when turned back on were plugged back in. So I know it's just not my phone it's a more universal problem with the 5 / 5S. I talk about this problem with customers I come a cross at work some have similar problems. I also try my phone on their car stereo and I also get similar results. My roommate who has the iPhone 5 recently got rid of it and got a Samsung note 3 this phone has no problem remembering where it was in the song when it was disconnected from the car stereo just like it's supposed to it just works. You turn the car off music stops turn the car on music begins playing where it was on the playlist it was playing in the same exact order it doesn't give you problems like the iPhone 5 / 5s. Also some customers I have talked to who have the 5C don't seem to really have this problem.

Maybe you are looking for