2 material document number having the same delivery number???

hi
is it possible to have 2 different material document numbers assigned to the same Outbound delivery number????
the situation is that one of the material document number was assigned to a particular delivery number say 'a' and deleted later on a particular date.
on the same date another material document number was created with the same delivery number 'a'.
is this possible to happen .(i.e functionally correct) ?????? bcoz i am getting such type of output in transaction "MIGO"...
PLZ HELP .POINTS WILL B AWARDED!!!

Hi,
Yes,it is possible.If you take example of partial delivery then say for example one delivery contains 10 items.Out of whixh I have delivered 4 yesterday and 6 today.This is done via creating transfer orders.Then two material documents will be created at time of PGI but they will refer to same delivery number.
Reward points if useful
Regards,
Amrish Purohit
Message was edited by:
AMRISH PUROHIT

Similar Messages

How to config to Time Recording ID Number are the same Personnel Number?

Dear all,
My schedule is Time Recording ID Number are the same Personnel Number. So Please hepl me config to Time Recording ID Number are the same Personnel Number.
Thank for your help.
Huyen Nguyen

Hi,
The time recording ID is the link between your personnel number in SAP and the time data captured by a swipe card.
When card is swiped on the terminal..the machine notes the timings, clock types, door ID, Card ID, etc.
The system identifies the personnel in SAP on the basis of the ID number which will also be there on the swipe card.
There isn't any config to maintain the ID in IT0050. Just maintain this value in IT0050 as any number, personnel number say, and use the same value while configuring data transfer frm recording machine to SAP via RFC.
Hope this helps.
Regards,
Shreyasi.

I activated my cloud membership and it worked. I just downloaded Lightroom 5.6 upgrade and it asked for a serial number. The same activation number I used before will not work now.

I activated my cloud membership and downloaded Lightroom 5.5. Today, I downloaded Lightroom 5.6 and it asked for a serial number before it would open. Why did the same serial number that worked 2 weeks ago not work now?

I activated my cloud membership and downloaded Lightroom 5.5. Today, I downloaded Lightroom 5.6 and it asked for a serial number before it would open. Why did the same serial number that worked 2 weeks ago not work now?

Material document posted on the same inspection lot but using another batch

Hi, May I request your assistance with regards to our issues on iinspection lot For this inspection lot, there were three movements created. When doing Usage Decision, it is reporting that there are still remaining quantity 13,332.413 LPA open in the inspection lot using batch X But checking in MMBE, the amount is in batch Y and there is no remaining qty in batch X. can you help me UD the inspection lot? Thanks, sara

Hi Sarah,
In UD screen, there is a message next to "insp End Date" that is " Actual Quantity of lot is greater than lot quantity". I guess, actual quantity has been changed using transaction QAC1.
Kindly check for corresponding entries in MB51.
There might be inconsistency between QM and MM stock.
Use Sap Note 48815 and check for any inconsistencies.
Amol.

Different Migo posted on the same delivery note number with the same vendor

Hi Experts,
We are facing a peculiar problem while saving migo in the sytem. The system is allowing to post more than one migo with the same delvery note number with the same vendor code in the same financial year. Ideally shystem should give some informative / error messgage during saving one migo. In our company, we capture party invoice number in the delivery note option. Our problem is more promintent if the vendor is non excisable.
How to check this problem.
Regards
GR

Hi,
In Standard SAP, no check is available on "Delivery Note" field for duplicacy. This is only available for "Reference" field in MIRO.
If you want to have a check on "Delivery Note" field in MIGO then go for some ABAP Development using BAdi or Enhancement Spot "MB_MIGO_BADI".

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself

Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot

Outgoing call log shows calls from my own number to the same number

Every so often, I pick up the phone to dial out and get a fast busy tone. I hang up, wait a few seconds, and try again, and I have dial tone and can dial out.
I have not noticed any pattern or timeframes when this occurs.
When looking at my online call log, I see calls at very random and arbitrary times of the day in the Outgoing column from my own number and TO the same number. ALWAYS after that there is an entry that the call went to voice mail. There is never an actual voice mail message, of course; I guess it hangs up before VM detects a valid message.
There appears to be an entry like this every single day, but, again, at very different times and with no discernible pattern.
Why is my own phone number trying to dial out to itself and at various times of day and night?

Having the same issue. Calls being made FROM my Maryland home landline TO a Virginia number.
I tried calling the number from my office phone, but it goes straight to an unoccupied voicemail.
When I first called about it, the Verizon representative also reassured me there was no charge for these calls, but that is not the issue. The issue is that someone or some machine has access to my home landline and it is making these calls. She was pretty insistent that it must be someone in my home, but much like others have stated, the records show that calls are made when no one is home, or when we are all home watching TV in the living room. We have one phone in the kitchen, so there are no secret calls being made. And certainly not 20+ times a month.
The first representative transferred me to another tech. At first, the new tech dismissed the idea that there could be cross-wiring (what the first tech suggested) because it's over the internet. There are no physical wires to cross.
The tech eventually ran a test and determined there was a "short bound in the wiring," so she said she was going to "reboot the ONC." I don't know what any of that means.
The test came back successful, and she was able to block the number (inbound and outbound).
I told both techs that this problem is not unique to my account; that there are several people on Verizon forums reporting the same issue.
She was not able to explain why, so we are no closer to figuring this out.
All I can recommend is calling Verizon tech support and having the number blocked. We'll see what happens with the next bill.
Also, if it's worth typing out, make sure you're reviewing your bills from Verizon. I've had to call at least five times in the 4.5 months about one thing or another.

How to find out the Group Delivery Number from STO

User performed WA08 to create Vendor PO and STO for stores.
When GR was carried out on the Vendor PO, multiple Delivery Order were auto-generated.
Now, is there a place whereby User could identified the Group Delivery Number which
links all the DOs generated based on either
a. The STO number OR
b. The vendor PO number OR
c. the allocation table.
Can some assist?

Hi,
Please check these tables
LIPS...
VBELN: for Delivery Number
VGBEL: for STO Number
with the above chk this.
VBSS...
SAMMG: Group Number
VBELN: Sales and Distribution Document Number
Regards
GK.

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for

I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???

Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR

TS2326 apple id and phone number of the same contact on different threads

Hi I have a single contact with apple id and phone number on my iphone 4 ios6. The issue is I have 2 contacts in Messages for the same Contact entry: one with the phone number (green bubbled) and the other with the apple id (blue bubbled). Too annoying. Couldn't find how. Any help? Thanks.

now I'm having the same problem but with the Weather Center app. Whenever I turn on the iPhone I get a notification the weather center is using current location and do I want to continue letting it or not. But there is another error message behind with a keypad and this time I cannot dismiss the weather center dialog.
Any suggestions?

After VLSP, to find the number of the master delivery

We are using VLSP tcode for splitting a single delivery to multiple deliveries. Say that we know the number of the multiple ones but we don't know the delivry number of the master delivery. How can we find it? Is there a table that creates a record for keeping the delivery number of the master one?
Thanks in advance for the answers....

Hi,
Kindly consider that the delivery split produce "results" & "remainder" delivery documents, the most probable that the remainder document is the original master doc before the split so it should be the one with oldest serial number.
Best regards.

Inconsistency between a document field and the prof. segment number

Hi,
While processing an invoice in one company code for vendor# XXX with the PO# AAAA line# 10, it is showing below error message while posting. Please advise on the below error or fix the issue to post the invoice in to SAP. The using screen T-code is miro.
Inconsistency between a document field and the prof. segment number
*Message no. KE396
*Diagnosis
A line item was assigned to a profitability segment (number 0008629207) which has the value 0000101000 for characteristic Profit Center. The original document (FI document, sales order, internal order, etc.), however, contains 0000102020 in this field. It is therefore inconsistent with the profitability segment found.
System response
The characteristics in Profitability Analysis (CO-PA) must have the same characteristic values as the original document. For example, you cannot assign a sales order to a different customer or product than the one contained in the original sales order. If you wish to fill the characteristics with different contents, you must change the original fields.
Procedure
Enter the correct characteristic values on the CO-PA assignment screen. The system will automatically assign a corresponding profitability segment number. If it is not possible to enter values in some of these fields, delete the entire assignment to a profitability segment number and then enter it again.
As a rule, you should first enter the fields in the original sender document and then make the assignment to a profitability segment.
What should I do for the above pl ?
Regards
Murali

Hi,
While doing PGR at VL32N, we are facing this error. Can someone assist.
Regards,
Aruna

I've tried to install a downloaded version of cs5 master collection using the same serial number i used by installing it with the installation dvds and the error message says it's an invalid serial number

as my adobe cs 5 master collections keeps having icc profiles and visualization issues, i've tried to reinstall the hole package. my mac book pro dvd reader is broken, so i downloaded from the adobe website a master collection and tried to install it with the serial number i used in the former installation but a error messages says that it's an invalid serial number.
i've already tried to install from the dvd's in another mac and it worked, with the same serial number, so i'm out of solutions.
any thoughts that may help me?

Si precisases de qué lugar de Adobe o de otro sitio has descargado....
Si indicases el nombre del archivo descargado,....
Respecto a la instalación, repito la lección de ruta es un paso, que puede pasarse por alto, aunque no sé si la instalación convencional reconoce una red entre varios equipos.
No hay ningun mensaje que indique que descargas una versión u otra, tampoco hay o sale ningun mensaje cuando instalas un programa en chino, eso si, al introducir el no. de serie (que no es el adquirido para la versión en chino) te dice que no es válido y punto. No más explicaciones.
Asi que por favor explicanos lo preguntado al rincipio, o vuleve a descargar la versión correcta, en el idioma correcto y desde un lugar oficial de Adobe.
Creo que Adobe te puede facilitar esa descarga a traves de la web "Licensing" con unas claves que te facilitarán si logras ponerte en contacto directo con ellos en tu país, (que tampoco sabemos cúal es). Suerte.

How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

Fred Tech wrote:
Broadly speaking, it depends on the type of license you have.
Specifically, if you have a single license then officially, you should only install it once on one computer.
Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
This is my understanding. I am happy to be corrected if I am wrong
Fred
Sorry Fred you are wrong.
If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

How do I add multiple tickets under the same confirmation number from the American Airlines app to Passbook?

I have a confirmation number from American Airlines for a flight with my family all under my name and for some reason I cannot add all of our tickets to Passbook. To clarify, I went to the American Airlines app and put in the confirmation number along with my name which pulled up my boarding pass only. Although I was able to add this boarding pass to Passbook, I was not able to add any of the other boarding passes for my children to Passbook that should have also been under the flight reservation. In fact I couldn't even see them in the American Airlines app. I tried to use their names and the same confirmation number but nothing happened, and nothing else seems to be working. How can I add all of these boarding passes to my Passbook?

Fair enough.
I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
I then continued it due to its convenience. My only counter argument is this:
Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
Thanks guys.

2 material document number having the same delivery number???

Similar Messages

Maybe you are looking for