2 or 3 second sound start delay

I'm using the optical sound output into a receiver, and I find that there is a 2 to 3 second delay in sound starting.  So, for example if there has been no sound for a while, then if I select a song, then I miss the first couple of seconds.
More importantly, if I'm not playing music, then it means that I miss the system sounds as they tend to be less than a couple of seconds long.
I can hear the audio clicking off through the speakers if there is no audio activity for a while.
Any ideas on this?

Well, I thought it was solved but that App makes my sound lock up about once a day requiring a restart.
There must be a solution to this as I've seen loads of posts on the same subject, mostly relating to MacBooks.
What is clearly happening is that the audio is going to sleep after a period, and when it's waking, the first second or so of the sound gets missed.  Now, when that is system sounds, they get missed completely!
Oh, I should say I've tried KeepSoundAwake as well.
Anyone?

Similar Messages

  • I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it?

    I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?

    Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
    you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
    plus u may have to use double buffering techniques to make sure it starts up right away......
    thelegendaryghost

  • Install AudioPCI as second sound c

    Hi,
    I have a working on-board SoundMAX audio (on an HP xw8200 workstation) and would like to add my tusty old AudioPCI as a second sound card. When I install the AudioPCI card and start XP, the AudioPCI works fine, but it has replaced the on-board SoundMax rather than working along side it!
    How do I install the Creative AudioPCI such that it does not un-install the SoundMAX.
    There are no device conflicts that I can see in Device Manager, with the AudioPCI un-installed the SoundMAX is PCI 0:3:0, while the AudioPCI is PCI 6::0 IRQ 22, I/O 4000-403F.
    TIA...

    Some mobos disable onboard sound if they detect another soundcard. That might be happening here. But if it didn't, you'd need to disable it yourself. (Futher explanation here.)Message Edited by Katman on 02-09-2006 09:37 PM

  • When i use google earth or somebody sends me a message or just simply opening a new tab, it crashes and it takes about 30 seconds to start working again, its not my computer as it is new and it has high spec, any help? thanks

    When i use google earth or somebody sends me a message or just simply opening a new tab, it crashes and it takes about 30 seconds to start working again, its not my computer as it is new and it has high spec, any help? thanks

    I figured it out!
    I read a solution for something that sounded similar.
    Anyone in similar position:
    Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
    Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
    Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
    Simple really, but some like me won't think f this themselves!
    Hope that helps

  • A few seconds after start the GDM mouse stops working

    After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
    Edited: Mouse works. Only pointer does not move.
    lscpi says:
    00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
    gdm says:
    usb 2-2: new low speed USB device using uhci_hcd and address 4
    input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
    (this line is repeated several times:)
    [drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
    [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
    [drm:i915_reset] *ERROR* Failed to reset chip.
    /var/log/Xorg.0.log says:
    [ 23.129]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 23.129]
    X.Org X Server 1.9.3.901 (1.9.4 RC 1)
    Release Date: 2011-01-07
    [ 23.129] X Protocol Version 11, Revision 0
    [ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
    [ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
    [ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
    [ 23.129] Build Date: 08 January 2011 11:27:31PM
    [ 23.129]
    [ 23.130] Current version of pixman: 0.20.2
    [ 23.130] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
    [ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.206] (==) No Layout section. Using the first Screen section.
    [ 23.206] (==) No screen section available. Using defaults.
    [ 23.206] (**) |-->Screen "Default Screen Section" (0)
    [ 23.206] (**) | |-->Monitor "<default monitor>"
    [ 23.206] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.206] (==) Automatically adding devices
    [ 23.206] (==) Automatically enabling devices
    [ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.260] Entry deleted from font path.
    [ 23.295] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.295] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.295] (II) Loader magic: 0x81f3160
    [ 23.295] (II) Module ABI versions:
    [ 23.295] X.Org ANSI C Emulation: 0.4
    [ 23.295] X.Org Video Driver: 8.0
    [ 23.295] X.Org XInput driver : 11.0
    [ 23.295] X.Org Server Extension : 4.0
    [ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
    [ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 23.296] (II) LoadModule: "extmod"
    [ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.314] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.314] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.314] Module class: X.Org Server Extension
    [ 23.314] ABI class: X.Org Server Extension, version 4.0
    [ 23.314] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.314] (II) Loading extension XFree86-VidModeExtension
    [ 23.314] (II) Loading extension XFree86-DGA
    [ 23.314] (II) Loading extension DPMS
    [ 23.314] (II) Loading extension XVideo
    [ 23.314] (II) Loading extension XVideo-MotionCompensation
    [ 23.314] (II) Loading extension X-Resource
    [ 23.314] (II) LoadModule: "dbe"
    [ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.320] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.320] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.320] Module class: X.Org Server Extension
    [ 23.320] ABI class: X.Org Server Extension, version 4.0
    [ 23.320] (II) Loading extension DOUBLE-BUFFER
    [ 23.320] (II) LoadModule: "glx"
    [ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 23.337] (II) Module glx: vendor="X.Org Foundation"
    [ 23.337] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.337] ABI class: X.Org Server Extension, version 4.0
    [ 23.337] (==) AIGLX enabled
    [ 23.337] (II) Loading extension GLX
    [ 23.337] (II) LoadModule: "record"
    [ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 23.338] (II) Module record: vendor="X.Org Foundation"
    [ 23.338] compiled for 1.9.3.901, module version = 1.13.0
    [ 23.338] Module class: X.Org Server Extension
    [ 23.338] ABI class: X.Org Server Extension, version 4.0
    [ 23.339] (II) Loading extension RECORD
    [ 23.339] (II) LoadModule: "dri"
    [ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 23.347] (II) Module dri: vendor="X.Org Foundation"
    [ 23.347] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.347] ABI class: X.Org Server Extension, version 4.0
    [ 23.347] (II) Loading extension XFree86-DRI
    [ 23.347] (II) LoadModule: "dri2"
    [ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 23.351] (II) Module dri2: vendor="X.Org Foundation"
    [ 23.351] compiled for 1.9.3.901, module version = 1.2.0
    [ 23.351] ABI class: X.Org Server Extension, version 4.0
    [ 23.351] (II) Loading extension DRI2
    [ 23.351] (==) Matched intel as autoconfigured driver 0
    [ 23.351] (==) Matched vesa as autoconfigured driver 1
    [ 23.351] (==) Matched fbdev as autoconfigured driver 2
    [ 23.351] (==) Assigned the driver to the xf86ConfigLayout
    [ 23.351] (II) LoadModule: "intel"
    [ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.408] (II) Module intel: vendor="X.Org Foundation"
    [ 23.408] compiled for 1.9.3, module version = 2.14.0
    [ 23.408] Module class: X.Org Video Driver
    [ 23.408] ABI class: X.Org Video Driver, version 8.0
    [ 23.408] (II) LoadModule: "vesa"
    [ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.414] (II) Module vesa: vendor="X.Org Foundation"
    [ 23.414] compiled for 1.9.0, module version = 2.3.0
    [ 23.414] Module class: X.Org Video Driver
    [ 23.414] ABI class: X.Org Video Driver, version 8.0
    [ 23.414] (II) LoadModule: "fbdev"
    [ 23.425] (WW) Warning, couldn't open module fbdev
    [ 23.425] (II) UnloadModule: "fbdev"
    [ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
    [ 23.426] (II) VESA: driver for VESA chipsets: vesa
    [ 23.426] (++) using VT number 7
    [ 23.435] (WW) Falling back to old probe method for vesa
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: drmOpenMinor returns 8
    [ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 23.435] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 23.435] (==) intel(0): RGB weight 888
    [ 23.435] (==) intel(0): Default visual is TrueColor
    [ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
    [ 23.436] (--) intel(0): Chipset: "946GZ"
    [ 23.436] (**) intel(0): Tiling enabled
    [ 23.436] (**) intel(0): SwapBuffers wait enabled
    [ 23.436] (==) intel(0): video overlay key set to 0x101fe
    [ 23.520] (II) intel(0): Output VGA1 has no monitor section
    [ 23.587] (II) intel(0): EDID for output VGA1
    [ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
    [ 23.587] (II) intel(0): Year: 2010 Week: 1
    [ 23.587] (II) intel(0): EDID Version: 1.3
    [ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
    [ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
    [ 23.587] (II) intel(0): Gamma: 2.20
    [ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
    [ 23.587] (II) intel(0): First detailed timing is preferred mode
    [ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
    [ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
    [ 23.587] (II) intel(0): Supported established timings:
    [ 23.587] (II) intel(0): 720x400@70Hz
    [ 23.587] (II) intel(0): 640x480@60Hz
    [ 23.587] (II) intel(0): 640x480@67Hz
    [ 23.587] (II) intel(0): 640x480@72Hz
    [ 23.587] (II) intel(0): 640x480@75Hz
    [ 23.587] (II) intel(0): 800x600@56Hz
    [ 23.587] (II) intel(0): 800x600@60Hz
    [ 23.587] (II) intel(0): 800x600@72Hz
    [ 23.587] (II) intel(0): 800x600@75Hz
    [ 23.587] (II) intel(0): 832x624@75Hz
    [ 23.587] (II) intel(0): 1024x768@60Hz
    [ 23.587] (II) intel(0): 1024x768@70Hz
    [ 23.587] (II) intel(0): 1024x768@75Hz
    [ 23.587] (II) intel(0): 1280x1024@75Hz
    [ 23.587] (II) intel(0): 1152x864@75Hz
    [ 23.587] (II) intel(0): Manufacturer's mask: 0
    [ 23.587] (II) intel(0): Supported standard timings:
    [ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 23.588] (II) intel(0): Supported detailed timing:
    [ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
    [ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 23.588] (II) intel(0): Monitor name: SyncMaster
    [ 23.588] (II) intel(0): Serial No: HMFZ102588
    [ 23.588] (II) intel(0): EDID (in hex):
    [ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
    [ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
    [ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
    [ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
    [ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
    [ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
    [ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
    [ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
    [ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 23.613] (II) intel(0): Using EDID range info for horizontal sync
    [ 23.613] (II) intel(0): Using EDID range info for vertical refresh
    [ 23.613] (II) intel(0): Printing DDC gathered Modelines:
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Printing probed modes for output VGA1
    [ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Output VGA1 connected
    [ 23.614] (II) intel(0): Using exact sizes for initial modes
    [ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
    [ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
    [ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
    [ 23.614] (**) intel(0): DPI set to (96, 88)
    [ 23.614] (II) Loading sub module "fb"
    [ 23.614] (II) LoadModule: "fb"
    [ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 23.628] (II) Module fb: vendor="X.Org Foundation"
    [ 23.629] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 23.629] (II) UnloadModule: "vesa"
    [ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.629] (==) Depth 24 pixmap format is 32 bpp
    [ 23.629] (==) intel(0): VideoRam: 262144 KB
    [ 23.629] (II) intel(0): [DRI2] Setup complete
    [ 23.629] (II) intel(0): [DRI2] DRI driver: i915
    [ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
    [ 23.656] (II) UXA(0): Driver registered support for the following operations:
    [ 23.656] (II) solid
    [ 23.656] (II) copy
    [ 23.656] (II) composite (RENDER acceleration)
    [ 23.656] (II) put_image
    [ 23.656] (II) get_image
    [ 23.656] (==) intel(0): Backing store disabled
    [ 23.656] (==) intel(0): Silken mouse enabled
    [ 23.658] (II) intel(0): Initializing HW Cursor
    [ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 23.673] (==) intel(0): DPMS enabled
    [ 23.673] (==) intel(0): Intel XvMC decoder disabled
    [ 23.673] (II) intel(0): Set up textured video
    [ 23.673] (II) intel(0): Set up overlay video
    [ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
    [ 23.673] (==) intel(0): hotplug detection: "enabled"
    [ 23.674] (--) RandR disabled
    [ 23.674] (II) Initializing built-in extension Generic Event Extension
    [ 23.674] (II) Initializing built-in extension SHAPE
    [ 23.674] (II) Initializing built-in extension MIT-SHM
    [ 23.674] (II) Initializing built-in extension XInputExtension
    [ 23.674] (II) Initializing built-in extension XTEST
    [ 23.674] (II) Initializing built-in extension BIG-REQUESTS
    [ 23.674] (II) Initializing built-in extension SYNC
    [ 23.674] (II) Initializing built-in extension XKEYBOARD
    [ 23.674] (II) Initializing built-in extension XC-MISC
    [ 23.674] (II) Initializing built-in extension SECURITY
    [ 23.674] (II) Initializing built-in extension XINERAMA
    [ 23.674] (II) Initializing built-in extension XFIXES
    [ 23.674] (II) Initializing built-in extension RENDER
    [ 23.674] (II) Initializing built-in extension RANDR
    [ 23.674] (II) Initializing built-in extension COMPOSITE
    [ 23.674] (II) Initializing built-in extension DAMAGE
    [ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
    [ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.316] (II) LoadModule: "evdev"
    [ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 24.334] (II) Module evdev: vendor="X.Org Foundation"
    [ 24.334] compiled for 1.9.0, module version = 2.5.0
    [ 24.334] Module class: X.Org XInput Driver
    [ 24.334] ABI class: X.Org XInput driver, version 11.0
    [ 24.334] (**) Power Button: always reports core events
    [ 24.334] (**) Power Button: Device: "/dev/input/event1"
    [ 24.340] (--) Power Button: Found keys
    [ 24.340] (II) Power Button: Configuring as keyboard
    [ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.340] (**) Option "xkb_rules" "evdev"
    [ 24.340] (**) Option "xkb_model" "evdev"
    [ 24.340] (**) Option "xkb_layout" "us"
    [ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.380] (**) Power Button: always reports core events
    [ 24.380] (**) Power Button: Device: "/dev/input/event0"
    [ 24.386] (--) Power Button: Found keys
    [ 24.386] (II) Power Button: Configuring as keyboard
    [ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.386] (**) Option "xkb_rules" "evdev"
    [ 24.386] (**) Option "xkb_model" "evdev"
    [ 24.386] (**) Option "xkb_layout" "us"
    [ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 24.394] (II) No input driver/identifier specified (ignoring)
    [ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
    [ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
    [ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
    [ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
    [ 24.403] (**) Option "xkb_rules" "evdev"
    [ 24.403] (**) Option "xkb_model" "evdev"
    [ 24.403] (**) Option "xkb_layout" "us"
    [ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 24.411] (II) No input driver/identifier specified (ignoring)
    [ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.182] (II) intel(0): Using hsync ranges from config file
    [ 27.182] (II) intel(0): Using vrefresh ranges from config file
    [ 27.182] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.256] (II) intel(0): Using hsync ranges from config file
    [ 27.256] (II) intel(0): Using vrefresh ranges from config file
    [ 27.256] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.363] (II) intel(0): Using hsync ranges from config file
    [ 27.364] (II) intel(0): Using vrefresh ranges from config file
    [ 27.364] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.433] (II) intel(0): Using hsync ranges from config file
    [ 27.433] (II) intel(0): Using vrefresh ranges from config file
    [ 27.433] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
    [ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
    [ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 72.861] (**) USB Optical Mouse: always reports core events
    [ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
    [ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
    [ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
    [ 72.866] (--) USB Optical Mouse: Found relative axes
    [ 72.866] (--) USB Optical Mouse: Found x and y relative axes
    [ 72.866] (II) USB Optical Mouse: Configuring as mouse
    [ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
    [ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
    [ 72.867] (II) USB Optical Mouse: initialized for relative axes.
    [ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
    [ 72.868] (II) No input driver/identifier specified (ignoring)
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.752] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.322] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.323] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.093] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.094] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.080] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.081] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.641] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.642] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.913] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.712] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.348] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.916] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.917] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.953] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.954] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.450] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.451] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.802] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.803] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.372] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.373] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.630] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.631] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.932] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.933] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.517] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.518] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.762] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.763] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.439] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.440] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.705] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.706] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.190] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.191] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.467] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.468] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.768] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.770] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.446] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.849] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.852] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.082] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.280] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.171] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.172] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.312] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.313] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.209] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.210] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.521] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.526] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.470] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.606] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.607] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.070] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.071] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.911] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.826] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.827] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.814] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.567] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.568] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.833] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.834] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.806] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.807] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.428] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.429] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.354] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.355] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.029] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.030] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.266] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.267] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.519] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.520] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.179] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.180] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.297] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.376] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.395] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.396] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/outpu

    I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

  • Mac book pro 13" 2010 beeps every 5 seconds at start up, will not boot up.

    my mac book pro 13" 2010 beeps every 5 seconds at start up, will not boot up. Any ideas what is wrong?  Removed and re installed memory, that did not work.         
    Thank You   ecbrum

    If you're handy with tools, pop the bottom pan on the Mac, take out the RAM sticks, thoroughly clean the contacts on both the sticks and the Mac (blow clean with a compressed air duster on the Mac, use isopropyl alcohol on the contacts on the RAM sticks), reseat and reinstall the sticks and retry. If same, try swapping the RAM sticks. If you need pictorial assistance, see here: http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Mid+2010+RAM/ 4319/1

  • Thunderbird crashes within seconds after starting, even when I completely reinstall it. Caused by Facebook Photo Uploader" (fbplugin)

    The basics: Mac OS X 10.10.1 Yosemite, 10 GB RAM. Thunderbird version 31.3.0 (though the same thing happens when I try earlier and later versions).
    Symptom: Thunderbird crashes within a few seconds of starting it up. I have enough time click on a menu or two, perhaps glance at a message, then it crashes.
    Attempted solutions:
    - Starting Thunderbird in Safe Mode.
    - Starting the Mac in Safe Mode.
    - Deleting ~/Library/Preferences/org.mozilla.thunderbird.plist and ~/Library/Preferences/Thunderbird, deleting the Thunderbird application, emptying the trash, and reinstalling Thunderbird from mozilla.org.
    - Using Yosemite Cache Cleaner to scan the hard drive for viruses, and to deep-clean all System and User caches.
    - Booting from the Recovery partition, repairing disk permission, and repairing the filesystem.
    The only time Thunderbird has semi-stable is just after I've deleted all preferences, started it up, and I do the initial set-up for my e-mail account. Everything appears normal, and my list of IMAP folders appears. But shortly after that Thunderbird crashes again, and keeps crashing at every subsequent restart.
    This is a problem that developed last Wednesday, Dec 24; prior to that the program ran just fine. No other program on my computer at work is showing these symptoms. Thunderbird works on my Macintosh at home (same software versions) and on my Linux computer at work.
    I'm at a loss of what to try next. Any ideas?

    Or you can try Earlybird from https://www.mozilla.org/en-US/thunderbird/channel/ which should have the patch from https://bugzilla.mozilla.org/show_bug.cgi?id=1086977

  • Slow startup & shut down on new iPod Touch 4G but it takes 40 seconds to start!!

    Hello,
    Just bought a new iPod Touch 4G (32GB) two weeks ago and from day 1 it takes forever to start up!   Usually about 40 seconds to start up and 30 seconds to shut down.   My son's 8GB starts up right away.   I've been a longtime Apple customer, but bugs like this are annoying.   Is this a reflection of that $150 million that Microsoft invested in Apple years ago?    

    I would get Applejack 1.5; just do a google for it. In stall it.
    Restart holding down the Command(Apple) + s key; until you see white lettering on black background.
    When you get to a prompt type the following: "applejack auto" no quotes; hit return and let it do its thing. If that doesn't fix it I would restart again Holding down the keys mentioned and type the following applejack AUTO and hit return.
    Best free application I have ever used. First thing use when trouble shooting.
    It will wipe out your desktop picture pref. only thing I have ever found that it does.

  • Firefox 4.0 takes about 60 seconds to start even after reinstalling.

    Firefox 4.0 takes about 60 seconds to start. I have tried reinstalling with no change. It isn't antivirus software, as I turned that off and it was still slow. I run Vista Ultimate. Internet Explorer loads very quickly.

    I wish my Firefox would load in 16 seconds!! It takes 3 to 4 mins to load but closes almost instantly.

  • At what level does your sound start coming through?

    Hello, I have had a look at previous discussions regarding sound issues but have not come across an answer for this particular one. On the bar level, my sound starts coming through at about the 6th one from 0%, is this normal for a brand new Intel core 17"? I only found this out by playing a CD today and wondering why there wasn't any sound even though the sound level was halfway....When do your sounds start coming through? My G3 sound started a lot earlier and halfway was loud enough so I am finding this a bit strange
    Btw, I have looked at the System Prefs and it all seems OK.
    Thanks

    Hello, I have had a look at previous discussions
    regarding sound issues but have not come across an
    answer for this particular one. On the bar level, my
    sound starts coming through at about the 6th one from
    0%, is this normal for a brand new Intel core 17"? I
    only found this out by playing a CD today and
    wondering why there wasn't any sound even though the
    sound level was halfway....When do your sounds start
    coming through? My G3 sound started a lot earlier and
    halfway was loud enough so I am finding this a bit
    strange
    Btw, I have looked at the System Prefs and it all
    seems OK.
    Thanks
    Has anyone anything further to say on this? I would like to know if it is normal for the sound to come through on the 6th bar as I find it very strange...
    Thanks

  • Broadband drops 30 seconds after starting browser

    My broadband stops working or drops everytime about 30 seconds I start the browser on my laptop. I am able to click on a few links and then it would say Problem Loading Page, Server Not Found. After waiting for another 30 seconds it would start working again. But then it drops again randomly every hour or so for 30 seconds. Please can someone give me some advice?
    Here are some facts about the problem
    1. All 3 blue lights on Home Hub 3 stays on
    2. Problem is the same for wireless and ethernet cable
    3. My laptop works perfectly at work without dropping
    4. My friend used his Macbook on my bt broadband with no problem until I opened my browser and starting browsing.
    5. I tried the quiet line test and hear nothing
    6. The homehub is connected to the main socket via a filter
    7. BT sent me a new hub but the problem is the same
    8. BT have reset my line at least 5 times and told me to wait 24 hours but problem still persist
    Event Log
    01:48:30, 24 May.
    ( 1146.520000) Admin login successful by 192.168.1.65 on HTTP
    01:48:12, 24 May.
    BLOCKED 3 more packets (because of First packet is Invalid)
    01:48:10, 24 May.
    OUT: BLOCK [65] First packet is Invalid (TCP 192.168.1.65:65429->173.194.41.149:443 on ppp0)
    01:48:10, 24 May.
    BLOCKED 1 more packets (because of Packet invalid in connection)
    01:48:10, 24 May.
    IN: BLOCK [9] Packet invalid in connection (TCP 140.177.16.17:80->86.180.40.102:65433 on ppp0)
    01:48:06, 24 May.
    BLOCKED 1 more packets (because of Packet invalid in connection)
    01:48:05, 24 May.
    IN: BLOCK [9] Packet invalid in connection (TCP 140.177.16.17:80->86.180.40.102:65431 on ppp0)
    01:46:19, 24 May.
    BLOCKED 1 more packets (because of ICMP redirect protection)
    01:46:18, 24 May.
    IN: BLOCK [8] ICMP redirect protection (ICMP type 5 code 1 83.99.132.33->86.180.40.102 on ppp0)
    01:41:46, 24 May.
    BLOCKED 5 more packets (because of Packet invalid in connection)
     Problem started around 1:47, I am not sure what they mean
    Broadband Speed Test Results
    Download Speed (Mbps): 14.52
    Upload Speed (Mbps): 0.94
    Ping Latency (ms): 246.67
    ADSL Line Test
    Line state:
    Connected
    Connection time:
    9 days, 15:13:36
    Downstream:
    16.37 Mbps
    Upstream:
    1.148 Mbps
    ADSL Settings
    VPI/VCI:
    0/38
    Type:
    PPPoA
    Modulation:
    G.992.5 Annex A
    Latency type:
    Fast
    Noise margin (Down/Up):
    2.9 dB / 6.7 dB
    Line attenuation (Down/Up):
    8.7 dB / 5.2 dB
    Output power (Down/Up):
    20.1 dBm / 11.9 dBm
    FEC Events (Down/Up):
    0 / 0
    CRC Events (Down/Up):
    86370 / 18
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    0 / 0
    Loss of Power (Local/Remote):
    0 / 0
    HEC Events (Down/Up):
    86259 / 9
    Error Seconds (Local/Remote):
    35271 / 13

    from your description it appears a problem with your laptop as it causes the dropped connection.  have you checked wireless card driver it up to date from manufacturer's website not windows update.
    have you tried a different browser to see if it helps?  have you checked your anti virus program is not blocking
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Sound lag (delay) in windows 7 64bit over Bootcamp mini server 2011

    I just got my new Mac mini server 2011, loaded windows 7 64 bit and noticed that there is a audio lag over hdmi (intel HD 3000), what i mean is when i delete a file from recycle bin there is no sound, i tried going to sounds in the control panel and tried to test windows system sounds none of them work except the longer duration ones (and even if i do hear them, its the last part of the audio). i tried playing a normal mp3 which worked fine, i tried a hd video which worked fine, but the windows system sounds don't work due to a 2-3 second sound lag. i tried the latest drivers from Intel, dint help. Well i guess this might be a driver problem (i hope it is) , just wanted to know if any of you guys are having the same problem. I don't have this problem with my mac mini 2011 i5 2.5 ATI6630m HDMI.

    Audio device driver: Mini uses ? I know some Macs use RealTek and others have Cirrus so whatever you have, then RealTek is easy to deal iwth and install, Cirrus is harder to find and install.
    Audio pretty much does not work w/o user manually updating

  • Imac shuts down 5 seconds into start up. Troubleshooting not working.

    Imac shuts down about 5 seconds after starting.

    Aubrey2320 wrote:
    iMac, purchased last year
    If you are still under warranty and/or have AppleCare, call them.  Let them deal w/it.
    OOW:  Take your Mac to your local Apple Store or an AASP.  Diagnostic testing is FREE!
    Other OOW options:
    How to save money on Mac repairs with your credit card’s extended warranty
    Troubleshooting not working.
    There is nothing anyone here can do as you did not provide any of the steps you've tried to solve your problem.  Need details to avoid the been there done that scenarios.

  • Why does it take 40 minutes to start watching a rental on Apple TV but only seconds to start watching Netflix?

    Why does it take 40 minutes to start watching a rental on Apple TV but only seconds to start watching Netflix?

    Welcome to the Apple Community.
    The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
    HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
    Netflix movies are adaptive and vary their quality according to your connection and can be as low as 0.5 Mbps.
    But remember lower datarates = lower quality.

  • Firefox takes about 20 - 45 seconds to start up?

    Ok i have extensions (all useful to me) and firefox takes at least 20-45 seconds to start up, i tried preloader and it didn't show a difference! Please help!!

    Turn on telemetry so at least the information is reported and made available to developers.
    * [[Send performance data to Mozilla to help improve Firefox]]
    Turn on Firefox Health Report (FHR) so that you see your own information about startup.
    *[[Firefox Health Report - understand your browser performance]]
    **'''[[Firefox Health Report says your browser is running slower than usual]]'''
    * [[Firefox takes a long time to start up]]
    Experiment to see if any particular addon slows Firefox startup and if so consider enabling that addon when it is needed instead of at startup. ead the article linked above for other ideas.
    If you wish to provide feedback please use
    *'''https://input.mozilla.org/en-US/feedback'''
    We are fellow users of Firefox. Developers will not see this forum.
    Input comments are categorised and aggregated and the results made available to developers.
    Once FHR has been running a while it will graph your startup times. I am not sure what the startup time in the FHR graph is based on, but I guess it may be ''FirstPaint'' time.
    I note the average first paint time is about 3 seconds with most people between 2 and 8 seconds http://mzl.la/1kWpnhW (Those graphs may not look very good)

Maybe you are looking for