2 pull or not 2 pull?

I wanted to connect my wifes new phone via USB but the connector on the 5310 has a plastic tab covering it. We can't find anything in the manual regarding the tab. After some picking & prodding I managed to pull it out far enough so I could pinch it with my fingers but there is still no give? I say pull it out but utill I get clarifaction from here she won't let me touch it.
Solved!
Go to Solution.

DOH! just as well I didn't pull it out. It looks like the plastic (inside the battery compartment) you get in kids toys, thats why my instinct was to pull it out! **bleep** design, but its nice & snug

Similar Messages

2LIS_02_SCL not pulling all data in EKET

Hi Experts,
i know datasource 2LIS_02_SCL is pulling R3 table EKET records.
in wat situation some records is not being pulled to BW? i got records exist in EKET but cannot find it in BW.
Thanks for the advise...

if i remember well within the standard extractors it's hardcoded not to extract doc category K...

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

Data is not getting pulled in PSA

Hi,
I have 9000 records in RAS3 but after replicating the DS in BI Ip is not pulling even a single record.
Any guesses what could be the issue?
Regards
I tried to put a BraekPoint in the FM to see the data..and could see data in there.
Edited by: Sas Lal on Aug 2, 2010 10:32 PM

Hi,
Is it a full load or delta load? If it is a delta load, then there might not be any new records in source.
Regards,
Raghavendra.

Folder mapping with Unix XI box / XI is not pulling the file from folder

We have installed XI on Unix box. We have developed a test scenario using file adapter and tested the mapping program. it's executing successfully. Problem is after completion of configuration XI server is not pulling the file from the assigned folder. I think we need to map that network driver with the XI server. Hope my assumption is correct if not correct me and please help me to resolve the problem.
any help appreciated
Regards,
Venkat Bomma.

Well, I had the same problem once but I don't remember exatcly the solution...
I am pretty sure it's a post-installation activity (search in SDN or marketplace for the relevant Guide).
You can also find some useful information in this doc right here <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39">How-To Monitor and Analyze Errors in the SAP J2EE Adapter Engine</a> starting from chapter 3.
Let me know if this helps. In the meantime I will dig in my memory...
Cheers,
Alex

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

I have pulled pictures off of my windows desktop to a jump drive to try to put them on my macbook pro (OS 10.7) but they do not show up when I plug in the jump drive.

I have pulled pictures off of my windows desktop onto a usb jumpdrive to transfer to my macbook pro (OSX10.7). when I plug it into my macbook I do not see the picture files. Does OSX not recognize certain files from windows? They are standard .jpg files.

Hello RumDog,
I think this article will help you find the media in your library.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Discovering and changing the iTunes Media folder location
Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
Mac OS X: Click the iTunes menu and choose Preferences.
Windows: Click the Edit menu and choose Preferences.
Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
You can then:
Note where your media folder is, such as for backing up your media.
Use the Reset button to reset it's location to the default (which is the iTunes folder).
Click the Change button to select a folder for a new location. Once you change this location:
If you make a new or alternate iTunes library, the new location will be used by that library.
Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
From: Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Cheers,
Sterling

My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome

Press the escape (esc) key to exit full-screen mode.

Report is not pulling the data from multiprovider in BI 7.0

Hi BW gurus,
We have upgraded our BW systems from 3.5 to BI 7.0.
According to our requirement we did some modifications(added some new cubes) to existing multiprovider. All the objects and assignments looks good in the multiprovider.
We are facing a problem while executing the reports, report is not pulling any data from the particular multiprovider but I can see the data from the multiprovider.
For any selection creteria we are getting the msg like "No applicable data found".
Created a sample query with only two chars and two KF's no conditions, no exceptions still the report is not populating any data for any selection creteria.
Appreaciate for your help in this regard.
-BK

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Works in RSA3 but not when pulling from BI

Hi,
I created a generic dataSource(Function Module) for Bill Of Material. When testing in RSA3 it is working fine. But when pulling data from BI with particular material in the Data Selection, it is saying "No data available". If I am pulling the same with no data selection then it is giving an error message "Job terminated in source system --> Request set to red".
When checked in SM37 I see the following error messages.
No active nametab exists for /SAPAPO/MATKEY DA 300
Job cancelled after system exception ERROR_MESSAGE
Can any body help me on this
Thanks for your help
Subra

Every thing is fine in all these transactions SM58, BD87, & WE05. There is no problem with the connections at all. I replicated many times and the error is always the same.
The error message below is the reason.
No active nametab exists for /SAPAPO/MATKEY
This messsage is not coming when testing in RSA3. Only when pulling the data from BI, this error is happening.
We are not using SAPAPO but still this message is coming up.
thanks
Subra

Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
Brian

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

Crystal Report not pulling over user prompts

I am having issues with a Crystal Report that is pulled over into a third party CRM db. I've already checked the Forums and the SAP notes but have had no luck in finding any help. Our Crystal Report pulls up fine on the client, but it is missing the user prompts (parameters) when it comes through. We don't get any errors what so ever. The user is supposed to put in the date range that they would like to see. Other reports which don't have any prompts work fine. We've run the reports in Crystal on the server and they work just fine. We are just having this problem whenever the client is trying to run the report. When we've talked to our technical support for our CRM db they said we are supposed to get a lightning bolt and then when we click on it, it will prompt the user. However, the lightning bolt doesn't even show up when the report is pulled up. I'm not sure is there is something being done wrong within our report, or if this is an issue with the Active X controls. We are using Crystal Reports XI on an SQL 2005 server. Any help is greatly appreciated - I'm very new to this so if someone could please point me in the right direction it would be helpful. Thanks!

Hello,
The Lightning bolt is the report refresh button in CR 10. CR 11 has blue circular arrows, one on top of the other. Or you can simply press the F5 key to refresh. It may be you are mixing versions or something else.
I suggest you work with your tech support to figure out how your application should work and what is posibly missing. If you have the report Designer and they work there then your app or DB has issues.
We don't know your app or how it all is supposed to work so not much we can suggest other than to get your support to help you.
If it's a WEB app then possibly the you have the Pop-up blocker enabled, the Parameter UI would considered a pop-up.
You relaly need to get your CRM support guys to help you first. If thye can't figure it out then ask them to put a call into support.
Thank you
Don

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

I want to take remote access from an iTunes library off of my iPad ...when I hit edit from the remote app it pulls that library up ..if I delete it I just want to make sure that I'm not remotely wiping out the library, just access to it from my iPad ?

I want to take remote access from an iTunes library off of my iPad ...when I hit edit from the remote app it pulls that library up ..if I delete it I just want to make sure that I'm not remotely wiping out the library, just access to it from my iPad ?

Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.

How do I use the color picker in Photoshop CC it will not pull in my swatches and how do I change swatches to another pallet from pantone?

How do I make the color picker work in Photoshop CC? It will not pull in my new swatch colors it just uses old pantone swatches?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

2 pull or not 2 pull?

Similar Messages

Maybe you are looking for