2-seat license not working on Mac running Windows 7

We have a full retail copy of Adobe Acrobat Pro XI. We are trying to get it installed on an Intel-Mac (2009 Macbook Pro) running Windows 7 on Bootcamp.
After a fresh install, we successfully license the software with the license key. All works well after that until we boot the Mac up in Mac OS X.
In Mac OS X, we launch Parallels, a third-party tool that allows you to run Windows-installed applications natively on the Windows Partition, to launch the same installed copy of Acrobat. Note, that we do not have Parallels configured in such a way as to run applications in a virtual machine manner.
When we launch Acrobat Pro here, we get the dialog that says it's a Trial copy. Thinking, 'well, ok, maybe we need to use up another seat of our license', we enter the same serial number again. Acrobat Pro XI works from then on activated on the Mac side.
BUT, when we boot backup into Bootcamp to verify that the 1st seat is still ok, we get the Trial dialog there. Back and forth, infinitum, we are unable to get a licensed version of Acrobat to run in both places. What are we doing wrong?

Thank you, but we're not trying to install or run the Mac version of the Adobe product.
On Intel Macs you have a choice of running the Windows product either under Bootcamp or under Parallels. Both environments are native Windows. In fact, they are identical. You just access them from two different boot environments on the same machine.
We've tried two different serial numbers, and we've tried both seats of the same serial number. Either way, no luck.
I had an Adobe support person tell me recently they have had problems with Parallels and so no longer support it. Too bad. We haven't had any issues with non-Adobe software working under either of these two Windows environments.
Carl

Similar Messages

Boot Camp 3.0, Size 900Mb having Drivers in it, not working On MAC with Windows 7

Hello.
I have installed Windows 7 on my MacBook Pro MD103LL/A without installing its drivers , used Boot Camp to install windows but unchecked the "Download Suport Drivers" for windows 7 and only installed windows 7.
Then on logging into Windows 7 i have installed BootCamp version 3.0 for windows 7 successfully but none of my drivers got updated through it as it showed the updating process while installing on windows but didnt update my windows 7, then i installed Boot Camp 3.1, 3.2 , 3.3 as Update on windows still nothing happened Whats the issue ?? I am not installing the drivers through BootCamp of MAC because it takes ages to download them thats y i found this as solution to install boot camp drivers on windows manually but the solution is not working for me PLZ HELP I shall be hight Thankfull.

Thanks mende1 .
I am receiving this erro on the above link
The requested URL /content/downloads/54/00/041-0694/sq2RLp7XVNQzRG8qdpsq9sj4pHsgXkgPYg/BootCampES D.pkg was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Apache Server at swcdn Port 80

Wifi not working on mac air windows 7

i cant get connected to internet after installing window 7 on my new macbook air no wi-fi bars in the tray,any help will do

Have you installed the Windows support software?
If not, restart your Mac, hold the Option (Alt) key while your Mac is starting and choose your OS X volume.
After starting up, open Boot Camp Assistant (in /Applications/Utilities), press Continue, and tick only the option to download the Windows support software. Then, follow its steps to burn it into a USB drive.
When it has finished, restart in Windows, access to your USB drive from Windows Explorer and run the installer. Your drivers will be installed, and after a simple restart, you will have Wi-Fi

File Load is not working on Mac but Windows

Hi i'm developing an app which simply load files (images and sounds) and uses binary data. Application is working fine on Windows, but it raises error on Mac.
Now i dont own Mac so i cant debug it, I also googled but couldnt find anything close to it.
Please advise
Thanks
PS: Its an AIR APP
Here are snippets to understand the code
//browse file
_loadFile.addEventListener(Event.SELECT, selectHandler);
_loadFile.browseForOpen(title, typeFilter);
//selectHandler
_loadFile.addEventListener(Event.COMPLETE, loadCompleteHandler);
_loadFile.load();
//loadCompleteHandler
//works on windows but TypeError on Mac
switch(file.type.toLowerCase()){
case ".mp3":
var sound:Sound = new Sound();
sound.loadCompressedDataFromByteArray(file.data, file.data.length);
fileHandler(sound);
break;
case ".jpg":
case ".png":
case ".jpeg":
case ".gif":
loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadBytesHandler);
loader.loadBytes(file.data);
break;
//loadBytesHandler
fileHandler(loader.content);

I just tried a simple File load test and the type property always traces out null. According to the ASDocs, the type property: "On the Macintosh, this property is the four-character file type, which is only used in Mac OS versions prior to Mac OS X. If the FileReference object was not populated, a call to get the value of this property returns null.".
Further reading into the FileReference docs, all properties are supposed to be populated once the complete event fires and that is when I ran a trace of the File.type.
Since the is an AIR app, you might want to consider using the extension property instead to know the file extension to run a switch case against. The ASDocs also say that in reference to Mac's: "You should consider the creator and type properties to be considered deprecated. They apply to older versions of Mac OS.".
If you choose to use the extension property instead, you don't have to include the "." in your switch statement. The ASDocs do say that "If there is no dot in the filename, the extension is null." So, you may want to run some tests on Windows to make sure that "extension" works. On Mac OS, pretty much every user friendly file (image, movie, document, etc) has a file extension so you shouldn't have any concern of extension returning null on Mac OS.
You probably got the TypeError on Mac OS because you were trying to run a String method on a null object at the start of the switch statement.
FileReference.extension

WebCAM and Fn+F5 or F6 does not work on T430 running Windows 8.1

I recently updated to Windows 8.1. I did not check the functionality of the Fn+F5 or F6 button back then. But I did run Skype two days ago with my webcam and that worked.
Then I ran windows and Lenovo system Update and updated all drivers except the Lenove Fingerprint, SHAREIT and the latest BIOS which are marked optional.
Now, no application can access my camera and the Fn+F6 does nothing.
I did go into the Windows privacy settings. Here Skype is on. there is no way to add apps, so e.g. I cannot add Teamviewer program or the Camera app.
I tried settings under Skype, but checking the webcam just makes Skype become unresponsive with a running circle. Same thing happens runnning Irfanview and trying to aquire a picture thought the webca,
I tried the Lenovo PC-Settings app. From the screenshots I think it is the old one I am getting. I can choose btw. Pointer,Wireless Power and location. Nothing about the webcam.
I tried stating it via the Lenovo Companion. Same problem.
In the process overview (Procexp from MS) I see Cammute.exe used by numerous processes
So, what can I do now to get them back?

I can't reproduce your issue. Definitely that CPU hanging is abnormal. I'd assume the cause is driver but you reinstalled that one. Perhaps some driver is located in the stack unproperly as there are too may components - system drivers, Lenovo PM driver, dependency settings, camera driver and settings, metro app... Also there is USB Composite controller the camera is attached to.
The only solution I see is ... delete everything I've mentioned above and reinstall them again using TVSU. Then install metro app.
Also in order to check USB driver influence I'd delete that driver too (delete USB composite controller in Device Manager). Reboot the system, Windows will find new component and install its driver. Do it before installation other components using TVSU.
Also try to connect USB devices (flash drives as an example) to every USB port and look at their behaviour.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

ESC (Escape) key not working in Mac and Windows?

It just won't work. Both OSes.

A bloating battery is a bad battery dying and developing gas inside. If this happens the bloated part can be under the left upperside of the keyboard and put pressure there. It may bulge the underside of the macbook, it may bulge under the trackpad and cause irratical trackpad behaviour, etecera. Check the battery.
If it is bad you should replace the battery.
Keyboard: you can replace the keys (per key) I think, if it is a bad keycontact.

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion? Best, James.

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion?
Best,
James.

you cannot use your pc license to install on a mac. you would need a separate license (and serial number) for that.
adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.

My own built fullscreen mode flv player is not working in Mac OS

I built a flv player, it is just a normal video player with a
fullscreen mode.
The video player is work fine in Window IE, FF, and Safari.
But not not working in Mac OS X, leopard & tiger &
May I know what might cause this problem?
I m usng action script 3, flash cs3 & all my browsers
already upgrade to latest version of Flash Player.
Help!!!

I am running Mac OS X 10.10.1 Yosemite and iPhoto Version 9.6 (910.29). Automatic updates in the Mac App Store is turned on for my iMac and it shows no updates available. I was told directly by Apple Support on the date that I wrote this article (Nov 8, 2014) that there were no Canon drivers and photo transfer software that worked with Yosemite. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution. At that time I was running Mac OS X 10.10 (because the 10.10.1 update was not yet available) and the most up-to-date version of iPhoto for Mac OS X 10.10 that was available at that time, at least per the Mac App Store. I was told by Canon that the workaround was to change the communication method from Normal to PTP on the camera, which did provide a solution.
With the Mac OS X 10.10.1 update if the camera is in PTP communications mode the thumbnails now appear in the Import screen in iPhoto almost immediately. If the camera is returned to Normal communications mode; however, it takes forever for the thumbnails to appear. I have been waiting 10 minutes and iPhoto has generated only 14 thumbnails. So it appears that there is still something not working properly between the original Canon EOS Digital Rebel and Mac OS X Yosemite 10.10.1 when the communications mode on the camera is set to Normal.

Tata Photon max on Huawei EC 315 is not working on Mac OS X 10.10

Hi All!
I have bought a Tata Photon max WiFi (Huawei EC 315) dongle, which is not working on Mac OS X 10.10.
Does anybody know what is the problem?
Do I need a different dialer?
Do I need a new driver for the Huawei dongle?
I didn't find satisfying solutions on Tata or Huawei homepage!
Who can help me to get this run?
I would be happy to get any feedback on my questions.
Thanks in advance for your comments.
MacMoe

Hello, please check this step by step video tutorial youtube to solved problems huawei modems on mac os x 10.10 Yosemite....Works perfectly!!! :-)
https://www.youtube.com/watch?v=jBM8qoV9VkM

Repaint() method is not working in MAC IE

Hi All
why repaint method is not working in MAC IE ? What i am doing is in one class which is inheriting Canvas class getting the keybord input then adding it to main applet.
Please help me i am trying it for whole week and i couldn't find any solution. I didn't put my code but if anyone is willing to help me i can post it.
Thanks in advancs
Shan

Hi
Thanks for your reply. Actually i wrote simple applets and those are working well.
So i did debug the code and i found that when i am running the following code in Apple MAC IE, nothing is happening in handleEvent method. Especially it is not going into the if statement (if (evt.id==401)). here i am checking for KEY_PRESS. I also tried with keyDown method but same problem in MAC IE.
I am pasting the code that is giving me problem.
import java.awt.*;
import java.applet.*;
public class testApplet extends Applet
public void init()
setLayout(new BorderLayout());
editableArea = new EditableArea();
editableArea.setBackground(Color.yellow);
add("Center", editableArea);
EditableArea editableArea;
import java.awt.*;
public class EditableArea extends Canvas
String s = "";
public boolean handleEvent(Event evt)
if (evt.id==401)
if(evt.key >= 32 && evt.key <= 255)
char c = (char)evt.key;
s = s + c;
repaint();
return super.handleEvent(evt);
public void paint( Graphics g )
g.setColor(Color.blue);
g.drawString( s,5,15);
--------------------------------------------------------------------

Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?

lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?

biomecasport,
Welcome to Apple Discussions.
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version.

Multiple Image Upload not working on macs

Hello everybody,
I have searched everywhere for an answer to this issue and I'm not sure if there is a solution yet.
I am hoping someone reads this and tells me if either I need to use another product or post a fix for this to work.
I am developing a website for a photographer who needs to upload the pictures he takes for his clients to review on his website.
So on the backend I have created an application where he logs in and creates a new client and then uploads multiple images to that client's folder.
I am of course developing the site in ADDT version 1.0.1. in Dreamweaver CS4.
Everything works as expected except for the image upload part, where he is unable to upload even a single image.
He is using Mac OS X and Safari 3 to access his site.
I use a PC and can upload images perfectly, but the whole purpose of the website is for him to be able to upload images without me.
I read somewhere that ADDT's Multiple Image upload did not work on Macs because of the way that the OS handles image uploads to the server via HTTP. I also know that Flash v.10 had an issue with this behaviour in the past, but that it's been fixed with ADDT's v. 1.0.1, which is true since as I said I am able to upload images from my PC using that Flash version.
There is a product called MultiPowUpload from Element-IT (http://www.element-it.com/MultiPowUpload.aspx) that seems to do the exact same thing as ADDT's Multiple Image Upload, and I have tested the Demo version both on Mac and PC and works perfectly well.
I really would like my ADDT behaviour to work, first because I already have the whole site developed in it, plus I am used to the software already, and also because Element-IT's product is a bit pricey for a multiple server license (which I would need for other sites I plan to develop for Mac users).
Any thoughts or pointers you might have will be greatly appreciated.
Thank you in advance.
Luis Herrero.

Thanks a lot for your replies and helpful ideas.
It turns out that for some strange reason the problem was with the hosting provider.
I have moved another site which was not working with Macs either to a new provider and everything works now as it should be, without changing any files at all.
I have in fact v.1.0.1 in both those sites (those were the first things I checked before posting here) and Flash Player v. 10 both on the Mac and PC, so it will remain a mystery as to why the server behavior did not work with that particular host on Macs.
Thanks again.
Best regards.

New File() is not working on MAC

Hi,
I don't know exactly what is the problem,since i search in forums.
but in my code
File f = new File("/Users/sky/Desktop/dist/test.txt");
is not working on Mac os.
Please help !

skymania wrote:
On window it will give output : success
On Mac it will give nothing.
On window and mac both file is not exist (physically). Bull.
Simply doing new File(...) does NOT create a file on disk, no matter what the OS.
On Windows, before running the Java code:
C:\>dir C:\CONFIG.SYS
02/05/2008 01:06 PM                 0 CONFIG.SYS
C:\>dir C:\zzzzz
File Not FoundThen I run this Java:
package scratch;
import java.io.File;
* Copyright (c) 2009 Tone Software Corporation
* @author Jeff Verdegan
public class NewFileDoesNotCreateAFileOnDisk {
public static void main (String[] args) throws Exception{
    File f1 = new File("C:/CONFIG.SYS");
    File f2 = new File("C:/zzzzz");
    System.out.println(f1.getCanonicalPath () + ".exists() is " + f1.exists ());
    System.out.println(f2.getCanonicalPath () + ".exists() is " + f2.exists ());
}and I get this result:
C:\CONFIG.SYS.exists() is true
C:\zzzzz.exists() is falseAnd then I do the dir again, and I get the same results.
Thus proving that new File does NOT create a file on the disk.
If you would bother to read the docs for the File class like I suggested, you'll see a way that you can create a file on disk.
And if you read my other comments, you'll see how to create a file as you write to it.

Does Firefox not work on Mac PPC paltform

I am trying to find out if Firefox 5 does not work on Mac PPC platform.

*Firefox 4 versions and later do not run on a PowerPC Mac.
*Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/5.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
*Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

The Horizontal & vertical scroll is not visible or not working when i run the form in Forms 6i.

Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
In this form , there are 5 canvas namely
CANVAS2 - Stacked Canvas
PASS - Content Canvas
MAT_RATES - Content Canvas
DATE - Content Canvas
PREVIOUS - Content Canvas
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.

Vijetha wrote:
Hi all,
The Horizontal & vertical scroll is not visible or not working when i run the form.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the WINDOW Property.
I have set "Show Horizontal Scroll Bar" to "Yes" and "Show Vertical Scroll Bar" to "Yes" in the STACKED CANVAS Property .
But still the Horizontal and Vertical Scroll Bar is not working when i run the Form.
Help me with this please. How do i make it visible??
Oracle Forms 6i..
Thank You.
hello vijetha,
window and canvas show scroll bar when it need.
You should show block property
and set block scroll bar
hope this helps..
Hamid

2-seat license not working on Mac running Windows 7

Similar Messages

Maybe you are looking for