2 Step Stock Transfer Using WM Transport Order??

Dear SAP expertes,
I have a problem, I think a lot of you too; that is stock transfer in 2 steps from one storage location to another (mov. types 313-315), but using o referencing a reservation.
SAP says that is not possible create reservations for 2 step stock transfer in MM, but also says use "Stock Transfer Orders" instead, that means use module WM.
Do anyone could transfer stock from one storage location to another using WM Stock Transfer Orders? I tried, but couldn't make it. In anyone have documention to do this I will appreciate it a lot.
Best regards,
Favio.

Hi Jürgen L.
I was checking SAP Note "28692 - MMIM: Reservation for a two-step stock transfer", and you were right, they say "Use the stock transport order instead of the stock transfer reservation".
I confused with WM stock tranfer order, but I want to ask you if you have used UB transport order between storage location of the same plant?
Best regards,
Favio.
Edited by: Favio Del Castillo on Sep 22, 2010 5:01 PM

Similar Messages

One Step Stock transfer

Hello All,
Can you please let me know the answer to the problem that I am facing.
Can we transfer the stock from one plant to another plant in one step stock transfer procedure taking the reference of STO already created ?
I know that it is done in MB1B using Movement type 301. But the question is, can I take the reference of STO created for transfering material in One step Procedure.

Thanks for Replying...
I have checked the settings for both these plants and the One step Procedure is selected and the document type is also UB.
As soon as I create a STO between plant 1000 and Plant 1200, the material starts showing in as open order quantity in plant 1200.
How to physically transfer the goods between these two plants taking the reference of STO ?

Two step stock transfer process

hi All,
i want to transfer material XYZ from plant AA to plant BB in 2 step stock transfer. Qt= 2000
So first i am trying to remove stock from plant AA in 303 movement type.
system throughing error message " Deficit of PL Stock in transfer 48000 PC: XYZ BB
ERROR Message no. M7 021
after analysis i found that in plant BB , in Stck trans.(plnt) , stock is showing ( - 50000)
i wonder how this stock got negative.
please help resolving this issue.
any help will be highly appreciated.
thanks in advance
regards,
Anubhab

hi Pankaj,
in both plant AA & BB , negative stock is allowed.
now i found that if i put the quantity equal to or more than 50000 , then system not giving error.
but if i put a smaller qt , say 1000, then system deducting it from 50000 & showing deficit 49000 at plant BB.
so the question is can't i transfer less than 50000 qt to BB from AA?
Also what is meaning of 50000 qt showing as negative in stock in transfer stock ? does it mean that with out posting 303 at plant AA , customer has posted 305 at plant BB?
Please help me understand. thanks .
regards,
anubhab

Issues on cross-company stock transfer triggered by sales order

Hi, friends:
As our business process required, we need to make the cross-company sale between to plants under two company codes.
The business process required is different from standard inter-company billing in SAP SD module. Our business process is as follows:
sales order --> PR --> PO --> cross-company stock transfer --> delivery to customer --> billing.
However, there is a difficulty in this process of make-to-stock production method. When we use schedule line item in SO to trigger the PO, there is a must to assign "account assignment category" in PO. This indicator is unchangable in PO by manual. When post goods recepit against the PO, there is no stock quantity udpate in un-restricted stock. By the way, I selected "C" in the "account assignment category" of schedule line item cofiguration.
Checked the MM documents, I found it seemed like only two results of PGR against PO with account assignment category. One result of PGR is directly consumpted by receiptent or unloading point. The other result of PGR is updating sepecial stock. For example, I've fullfilled the process for make-to-order production method, the stocks are specified for sales order.
In our requiremnt, we have to post to normal un-restricted stock for the following ATP in sales order.
Could any friend give some suggestion on this issue?
Thanks!
Justin

Hi, Venkadesh:
I've checked the Purchasing view and quantity/value update in both plants of different company codes. That's correctly configured.
In the business process, the quantity in normal un-restricted stock updating still doesn't work.
Do you mean that as follows: if select any indicator in "account assignment category", we have to use UNBW or NLAG material type in the purchase order?
I have successfully fullfilled the process in make-to-order sales order, with material type FERT and account assignment category "E". The account assignmnet categroy is obligatory in sales order schedlue line item configuration, which is to trigger PO by SO. The configuration path is as below:
IMG>Sales and Distribution>Sales>Sales Documents>Schedule Lines-->Define Schedule Line Categories
If possible, would make a test in your system to check how to fullfill the process with make-to-stock sales order, FERT material?
Thanks!
Justin

G/l postings suring stock transfer using STO with delivery

Hi Guys
What are the G/L postings occur during A stock transfer between plant to plant inside the same company code. This is done using STO with sales delivery ( no sales order).
Thanks
Sam

It will be BSX Stock or Inv acc Dr. for the recv plant and BSX Stock or Inve acc Cr for the Supplying Plant if you are using 648 movemnt type in PGI .
No acc postings in MIGO GR when you will recv the goods in recv plant.
Regards
Sujoy

Stock Transfer using movement type 309 of in-transit material

Hi Gurus,
We have a scenario where we want to post a 309 movement type on an intransit STO stock (sto is done from PWO, this is done to solve a SOX compliance problem). But it seems that this is not possible as the 309 can not be posted without a s. loc. Is there any alternative to this? Can a two step transfer using 313 and 315 do the trick? Please advise.
Thanks

In real life you cannot do anything to a material that is somewhere on the road, hence it is pretty limited what you can do in SAP.
What exactly do you want to do?

Stock transfer using PICK LIST / PULL LIST

Hi Friend,
We have two storage locations in the plant say 1000 - Main store which is ware house managed and 2000 - Production storage location.
The goods issue needs to be done from production storage location 2000. How to transfer the material from 1000 - Main store which is ware house managed to 2000 - Production storage location using PICK LIST / PULL LIST concept.
Kindly give the solution.
Regards,
Narendra Bora

Hello Madhu,
If you can suggest me as well. I am moving the goods to production storage location from raw material storage lcoation,
While executing the MF60 it creates the reservation and display log
RMPU     stock transfer reservations 00000412 22.03.2010 created successfully
But does not move the goods using 311 movement type and stock is still in the raw material storage location.
2ndly in MMBE, if i found the stock in Produciton location, it shows me
Reserved                     20.000
GR blocked stock         20.000
Rcpt reservation          20.000
If you can enlighten me in this area please, Would it move the stock or I need to make some other steps also.
Regards,
JPS

Stock Transfer using 303 and 305

Hello
When we are doing stock transfer from 1plant to other plant and we have done 303 movement but 305 is yet to be done,at this instant whom does the stock belong in SAP.
Is it considered as stock in transit or in stock of receiving plant and where can I see it?
Regards

hi
when u transfer the stock in 303 the stock is placed in IN TRANSIT AND TRANSFER stock and the liability will be with receving plant
you can check this in MB52 stock statement
regards
kunal

Stock Transfer using Two Step (QI & Block stock)

Hi All ,
Is it possible to receive material QI / Blocked stock of receiving plant ??
Another query is ... can I transfer QI / Block stock of supplying plant to another plant ??
I have a business case where I have to transfer QI stock from one plant to another Plant using two step.
Regards/
Suresh

Hi,
As a rule cross-plant stock transfers is done only through unrestricted-used stock only.
BR,
Krishna

Is there a way to create consignment stock without using a Purchase Order

Hi Gurus,
Is there a way tp created unrestricted consignment stock for a material without first creating a Purchase Order and then using MIGO. Is there a way to create directly into inventory?
Thanks for your help!

Hi Charlie/All,
Still having the same issue.
I checked t-code OMEV to make sure Consignment Info Record is activated
I checked the EINE table to verify the Infor Record was created for consignment
In MIGO I use the following:
Goods receipt - other - movement type 501K
material, vendor, qty entered
error msg: purchase info record not founf in purchasing organization??
not sure why..thank for all your help so far...

Stock transfer using movtyp 541 an 542

Hi,
Stock is to be transfered from one storage to vendor using movtype 541 and 542. After using 541 stock is kept in transit using 541 and normally the system should
generate automatically a Movement Type 542 to move the
stock to vendor. .. But transfer of stock using 542 failed and stock is presenrly in transit.
So please tell me how to transfer this stock in transit to the vendor .
PLease help
Points will be rewarded
Thanks
Rohit

Hi Rohit,
You are talking about Subcontractiong process,
In Subcontracting first you create a Sub contracting PO with item L, then you do transfer Posting of your stock to vendor using 541Mvt for this PO, and once this subcontracting material is recieved through Mvt Type 101 there is an automatic consumption Mvt type 543 which will happen indicating the consumption of the subcontracting material.
there is no concept of stock in transit in Subcontracting.
542 Mvt is used as a reversal of 541 which will bring back the stock from vendor to your own stock.
Regards,
Vijay

Two step stock transfer

If I want to transfer material from one storage location to another, through MRP system creates reservation with movement type 311. But I want to have reservation with movement type 313 so that it will be two step and material can be transfered to transit.
How can I set this through configuration ?

Hi Balaji,
Chk the link below :
http://help.sap.com/saphelp_46c/helpdata/en/a5/63385543a211d189410000e829fbbd/frameset.htm
BR,
Krishna

Stock Transfer using Intransit plant

Experts,
We have a case where the material has to be transferred from Plant1 to Plant2. We also treat the Truck which carries the material from Plant 1 to Plant 2 as an in transit plant (say plant 3). Truck then delivers material to the Destination Plant. So we have 2 Stock Transfers here from Source Plant1 to Intransit Plant (Plant 3) and then from Intrasit Plant3 to Destination Plant2.
How would we create excise invoice in this case. The main reason for creating an intransit plant is that the carrier may be used to deliver the material to different destination plants
Will creating a manual Excise Invoice using J1IS would serve the purpose

The Business is Oil Down stream...Plant 3 is the truck which carries Oil from Refinery (Plant 1 ) to Depot (Plant 2)...
The reason behind this is the Same Oil truck would despatch Oil to 2 or more depots...
My question is about the Excise Invoice making ...refer my first posting
This is already implemented in other countries and we need to apply this for India.

Can't create stock transfer using DI Server

Hi Experts,
I need a very urgent help from you guys.
I was creating an inventory transfer document with batch numbers by using DI Server, Each time it gives me error "10000559 - Not enough data".
I am using following soap string.
Thanks in advance for the help
<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<env:Header>
    <SessionID>6BD16887-E595-41B0-A6D2-D730DFA07B55</SessionID>
</env:Header>
<env:Body>
    <dis:AddObject xmlns:dis="http://www.sap.com/SBO/DIS">
      <BOM>
        <BO>
          <AdmInfo>
            <Object>oStockTransfer</Object>
          </AdmInfo>
          <Documents>
            <row>
              <CardCode>V00204</CardCode>
            </row>
          </Documents>
          <Document_Lines>
            <row>
              <ItemCode>Raw Colostrum</ItemCode>
              <WarehouseCode>TANK1</WarehouseCode>
              <Quantity>2.5</Quantity>
              <FromWarehouseCode>FREEZER1</FromWarehouseCode>
            </row>
          </Document_Lines>
          <BatchNumbers>
            <row>
              <BatchNumber>140505155901743</BatchNumber>
              <Quantity>2.5</Quantity>
              <BaseLineNumber>0</BaseLineNumber>
            </row>
          </BatchNumbers>
        </BO>
      </BOM>
    </dis:AddObject>
</env:Body>
</env:Envelope>

Hi Ritu,
I don't know exactly what the problem is, but the following xml is working for me ( using StockTransferService):
<?xml version="1.0" ?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <soap:Header>
        <MsgHeader xmlns="http://www.sap.com/SBO/DIS">
            <SessionID>87CC6D32-2724-49EA-BD30-EA6DD1F0810C</SessionID>
            <ServiceName>StockTransferService</ServiceName>
        </MsgHeader>
    </soap:Header>
    <soap:Body>
        <Add xmlns="StockTransferService">
            <StockTransfer xmlns="http://www.sap.com/SBO/DIS">
                <FromWarehouse>01</FromWarehouse>
                <ToWarehouse>02</ToWarehouse>
                <StockTransferLines>
                    <StockTransferLine>
                        <ItemCode>B10000</ItemCode>
                        <Quantity>1</Quantity>
                        <WarehouseCode>02</WarehouseCode>
                        <BatchNumbers>
                            <BatchNumber>
                                <BatchNumber>B1-00067</BatchNumber>
                                <Quantity>1</Quantity>
                                <BaseLineNumber>0</BaseLineNumber>
                            </BatchNumber>
                        </BatchNumbers>
                    </StockTransferLine>
                </StockTransferLines>
            </StockTransfer>
        </Add>
    </soap:Body>
</soap:Envelope>
regards,
Maik

HELP for all 5 TYPES of STO Stock Transport Orders with detailed scenario

PLEASE help me understanding the detailed scenarios for all 5 TYPES of STO s
as in my day to day job activities , i frequently handles issues related to STO s
PLEASE HELP WITH DETAILED STEP BY STEP SCENARIOS

Hi Jagatram,
Standard SAP has the following methods For Stock transport order:
1) One Step Transfer stock without using purchasing documents; Use movement type 301.
2) Two Step Transfer stock without using purchasing documents; Use movement type 303 in Supplying plant and movement type 305 in receiving plant.
3) Using Standard Transport Order (STO) without delivery in two steps. STO created in T-Code ME27, receiving plant posts goods issue (for returns), movement type 351 and supplying plant post goods receipt from using movement type 101.
4) Using Standard Transport Order (STO) with delivery in one step. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 647 and goods receipt document with movement type 101 both created in one step.
5) Using Standard Transport Order (STO) with delivery in two steps. STO created in T-Code ME27, Receiving plant creates shipment and Goods issue posted (for materials to be returned) with movement type 641.Goods receipt is posted in the supplying plant, movement type 101.
6) Using Transportation scheduling agreement (TSA) with delivery in two steps. TSA created in T-Code ME37. Receiving plant creates shipment and Goods issue document (for materials to be returned) with movement type 641. Goods receipt is posted in the supplying plant, movement type 101.
To achieve it, necessary configurations has to be done in Tcode- OMGN.
SPRO>> Materials management>> Purchasing>> Purchase Order>> Set up Stock transport Order:
1. Plant: For the receiving plant, maintain customer No-Plant (If using STO with delivery), for the Sales Org, Dist channel and Division.
2. Checking Rule: Create checking rule.
3. Define checking rule : Usually no change required here.
4. Assign delivery type/checking rule: Assign the document type(UB) - Supplying plant- Delivery type(NL).
5. Purchasing document type: Maintain the supplying plant- Receiving plant relationships for the doc type-UB, either 1-step or 2-step, as per business.
Hope this helps!
Regards,
Shilpa

2 Step Stock Transfer Using WM Transport Order??

Similar Messages

Maybe you are looking for