(2) Vehicles - But want to have only ONE FOB for keyless entry and remote start

I have the following 2 vehicles:
2003 Dodge Durango RT with automatic transmission
2006 Volvo V70R with 6-Speed manual transmission
I am looking to purchase a keyless entry / remote start on BOTH vehicles but use only (1) FOB to control both as I will only be using either vehicle at a time. If I need to use both, I will use 2 FOBs. Is there any current breand or system that can do this, like have switch and can be programmed for more than one vehicles ??? Thank you for any info and God Bless !!!
Solved!
Go to Solution.

VBVAGUY,
Best Buy has 2 brands that can control 2 cars. Viper and Compustar. You said you would like keyless and remotes start. Are these the only features you are looking for? Security? The system below is a Viper 1-way with around 2000 foot range that offers 2 car mode. They also have a 1 mile range and also a 2-way system. This is a nice feature if you don't have visibility to the vehicle, the remote will tell you if the car started.
http://www.bestbuy.com/site/viper-1-way-remote-sta​rt-system/6891137.p?id=1218810613502&skuId=6891137
With any of these system you are also going to need some additional parts and labor. Also because the Volvo has a manual transmission there is a certain sequence you must do every time you park the vehicle. If this is not done the remote start will not work. Doesn't effect the keyless entry.
Stop in a local Best Buy and speak to the AutoTech. They can educate you on the different model, feature and the manual transmission sequence.

Similar Messages

  • Hi, I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop. Thanks

    Hi,
    I have apple account/password on laptop but can't use the same ID etc on new Ipad.  On my account it says ID is only for 1 system.  I really want only one ID for both Ipad and laptop.
    Thanks

    It seems that you have used the AppleIDs to "Purchase" your devices, which marries the two for all time and eternity.
    For info - Using your Apple ID for Apple services
    For Account security issues - Apple ID: Contacting Apple for help with Apple ID account security
    regards
    CCC

  • I have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

    i have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

    You need to get headset splitter adapter.
    http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Position-to-2x-3- Position-35mm-Headset-Splitter-Adapter-Male-to-Female~MUYHSMFF

  • Can i return my new ipad that i upgraded i have only had it for 11 days and i still have its box and all it came with

    Can i return my new ipad that i upgraded i have only had it for 11 days and i still have its box and all it came with

    You have 14 days from date of purchase. You need all the packaging plus your receipt.

  • Hi i want to have get one application for ipad 2

    hi ipad 2 , i would like to have a one application for deaf ipad 2 thank you Fama Denney

    Try this site
    http://appadvice.com/applist_ipad_client_view/apps-for-the-deaf

  • Display only one row for distinct columns and with multiple rows their valu

    Hi,
    I have a table having some similar rows for some columns and multiple different rows for some other columns
    i.e
    o_mobile_no o_doc_date o_status d_mobile_no d_doc_date d_status
    9825000111 01-jan-06 'a' 980515464 01-feb-06 c
    9825000111 01-jan-06 'a' 991543154 02-feb-06 d
    9825000111 01-jan-06 'a' 154845545 10-mar-06 a
    What i want is to display only one row for above distinct row along with multiple non distinct colums
    ie
    o_mobile_no o_doc_date o_status d_mobile_no d_doc_date d_status
    9825000111 01-jan-06 'a' 980515464 01-feb-06 c
    991543154 02-feb-06 d
    154845545 10-mar-06 a
    regards,
    Kumar

    Re: SQL Help

  • Two different Icloud accounts but want to share only one?

    Hello everyone,
    Alright, I just swiched to the new iphone, so i put everything from my old phone to my new phone. BUT here is the problem, i cant access the familys icloud account. they all have the same one, but i am stuck with one odd one:/. so now i want to switch mines to the one everybody in my family has, but it wont let me ;l. how would i be able to switch it? thank you sooooo much!!!!

    To change iCloud accounts on your phone, go to Settings>iCloud, tap Delete Account, provide the password when prompted, then sign back in with the family account ID.  If all your data is already in the family iCloud account, choose Delete from My iPhone when prompted after deleting the existing account.

  • Can I have only one library for me & my wife?

    I created it originally and have tried dragging my iphoto library into the shared folder, but while I can then access the photos fine from there, my wife sees it as a locked folder (and even more odd, only half of the folders of photos (years) are locked). I can't unlock them for her to access no matter what I try. Any advice?
    I should clarify that, of course, we are two separate user accounts.

    Hi tom,
    here is all the info and links I have on the library sharing. the newest info is the one on using ACL's (the last link)
    SHARING IPHOTO LIBRARIES
    Sharing libraries between users on the same local network
    You can also share a library on the same machine between users the same way.
    Sharing libraries between users on the same machine...
    -both users must have sharing enabled in their iPhoto Preferences
    -both users must be logged in and have iPhoto running
    -Remember that you can only view the other library. You can't edit the photos or play the saved slideshows or view the made books or burn them to CD or DVD. The books and slideshows will show up as an album. You can play that album as an "on the fly" slideshow. You can drag images from the sharing library to your library in the source column to import them to your library. You can then edit, add to albums, books, slideshow, etc.
    Sharing links from Apple....
    Sharing your photos between computers
    About shared photos
    Turning off photo sharing
    Looking for shared photos
    SHARING ONE IPHOTO LIBRARY BETWEEN USERS ON SAME MACHINE
    You can try one of these three methods:
    1- Use iPhoto Library Manager-the paid version
    The documentation page will give instructions on how it is done.
    2- Sharing one iPhoto library between several users on one machine
    3- Share an iPhoto Library in tiger Using ACL's

  • Has anyone set up a Solaris 7 LDAP client to use with iPlanet DS 5.0?  I have only found docs for compiling OpenLDAP and have had NO LUCK with it. I can't get an LDAP client to run.

    I am trying Not to have 3 separate versions of LDAP in my environment (iDS5,Native Solaris LDAP,OpenLDAP). Can anyone point me to some DETAILED instructions to get an LDAP client (not server) running on Solaris 7?

    Hi,
    While U try to upgrade solaris it first tries to check the installed softtware & application and patch's specific to the exsisting version b'coz these patch are specific to version in most cases.Since in Ur case the authentication is done in ldap it would become bit of a mess if U upgrade.

  • Has anyone set up a Solaris 8 LDAP client to use with iPlanet DS 5.0?  I have only found docs for compiling OpenLDAP and have had NO LUCK with it. I can't get an LDAP client to run.

    help with client
    error on ldap_client_file
    ldap_client_cred

    Hi,
    Yes it can be done provided U've given proper information during configuring.The sun machine which is to be used as a client should be installed as a ldap client "at the time of installation ldap client option should be chosen.

  • Can I use only one computer for driver development?

    Hi! I'm newbie in driver development and now is first day when I make the acquaintance of driver development. There is the next phrase in MSDN in
    https://msdn.microsoft.com/en-us/library/windows/hardware/hh706187(v=vs.85).aspx
    : "For developing, debugging, and installing a kernel-mode driver, you need two computers". But I unfortunately have only one computer and I have to develop the USB Kernel Mode driver as technical assignment for admission to the job.
    My computer is under Windows 7 OS and already has standard USB driver. I have Visual Studio 2013 Ultimate and WDK 8.1 Update on my computer. Can I use only one computer for driver development and debugging or not?

    no, not really, you need two. you can use a VM as the machine under test though.
    d -- This posting is provided "AS IS" with no warranties, and confers no rights.

  • To download from AppStore want tree security questions  but i have only one question

    When i want to download (free) from AppStore ask me TREE Security questions , but in security settings my APPLE ID have only ONE question and answer
    Help me please in this problem

    Hello HalisaEr,
    Thank you for the details of the issue you are experiencing with your security questions.  I found an article with some useful information if you unable to answer the security questions:
    What should I do if I don't remember the answers to my Apple ID security questions?
    Try answering them at least once to see if you can get them right, even if you are not sure you remember the answers to your security questions.
    If you are confident you can't remember them, try one of the following:
    If you have three security questions and a rescue email address
    sign in to My Apple ID and select the Password and Security tab to send an email to your rescue email address to reset your security questions and answers.
    If you have one security question and you know your Apple ID passwordsign in to My Apple ID and select the Password and Security tab to reset your security question.
    If you have one security question, but don't remember your Apple ID password
    contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
    Note: If you have forgotten your password and answer your security questions incorrectly too many times in a row, you will be unable to try to answer your security questions for a period of time. During that time you will not be able to reset your password and will not have access to your account.
    You can find the full article here:
    Apple ID: All about Apple ID security questions
    http://support.apple.com/kb/HT5665
    If you continue to have issues, please contact our Account Security Team as outlined in this article:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I just synced my music to my iphone 5 and i have only one playlist but I need help

    Hi,
    i just synced my music to my iphone 5 and i have only one playlist but when i sync my music to my ipad i have other music on there that i don't want right now i just want my christmas playlist folder that i have playlists cause on my iphone 5 i just have one playlist which is christmas music playlist folder that has playlists in it which is what i only want on my ipad right now thanks

    Hey,
    Here is what I did:
    1. Connected my iPad to the computer.
    2. Opened iTunes.
    3. Pressed Music Tab.
    4. Pressed the Selected Playlists, Artists, Albums, and Genres
    5. Then in the Playlist box below I only have the Christmas music folder checked and all the playlists in that folder checked.
    6. Then I Synced my iPad
    Here is a Picture of my iTunes of what I'm talking about and then also here is a picture of my iPhone 5 music that has only one playlist folder with playists in it

  • I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    Click here for options.
    (58961)

  • TS1424 I downloaded a song that stops at 1:04 and jumps to the next song, as if it's over.  This song was in the middle of several songs, but this is the only one that is incomplete.  Can I download this song again for free, or do I have to purchase again

    I downloaded a song that stops at 1:04 and jumps to the next song, as if it's over.  This song was in the middle of several songs, but this is the only one that is incomplete.  Can I download this song again for free, or do I have to purchase again?

    If you live in a Region that allows re-downloading Music...
    Delete the Song(s) and re-download...
    See Here  >  Download Past Purchases
    http://support.apple.com/kb/HT2519
    If not... Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us

Maybe you are looking for