2 x 27" LED Cinema Display and MacBook Pro 15-inch: 2.66GHz Intel Core i7

Hi, here is my question. How can I connect these 2 displays with my MacBook Pro?

http://www.opentip.com/Electronics-Computers/Atlona-Mini-Displayport-Splitter-Di stribution-Amplifier-p-1625571.html (or http://www.atlona.com/ATLONA-1x2-MINI-DISPLAYPORT-SPLITTER.html for tech specs)
also
http://www.cinemaview.com/product/cinemaview-duo

Similar Messages

MacBook Pro 17-inch: 2.16GHz Intel Core Duo running on OS X 10.6.8, can I update to Lion or Mtn Lion? thanks ed c.

MacBook Pro
17-inch: 2.16GHz Intel Core Duo running on OS X 10.6.8, can I update to Lion or Mtn Lion? thanks ed c

A Core Duo(not Core 2 Duo) can't be upgraded past 10.6.8.
(73883)

How to connect multiple Apple LED Cinema Displays to MacBook Pro

I have an Apple 24 inch LED Cinema display that I run from my MB Pro. I mainly use the MB Pro+ screen for document editing.
I would like to run a second Apple 24 inch Cinema display from the MB Pro. I am presently running another monitor successfully via a Dynalink USB splitter but would really prefer to run a second Apple monitor. I have enquired at two Apple Stores and browsed lots of sites. Multiple monitors from MB Pro seems ok (as long as it's not two Apple monitors). I would be surprised if Apple is content to pass up the opportunity to sell more of these superb screens.
Grateful for any advice and suggestions

In addition to the one from Atlona, there are:
<http://www.gefen.com/gefentv/gtvproduct.jsp?prod_id=9898>
<http://www.kanexlive.com/c247dl>

Apple Aluminum Keyboard and 23" cinema Display and MacBook Pro??

Hello there
I have just purchased an Apple Aluminum Keyboard and have and MacBook Pro with and 23" cinema display, and if i try to connect the keyboard to my cinema display via USB the keyboard don't work.
i have an Apple mighty mouse that works fine wen connected to the USB port on the display...
why is it not working...

have you tried a different USB port on the ACD? Maybe the one you used was defective? I run a 7-port bus off one of the USB ports for all my hardware. OTOH, I do use bluetooth mouse and keyboard!

Connecting a 20" Cinema Display and MacBook Pro 4,1

I admit I bought a cinema display from a co-worker because I thought it'd be nice to have a larger screen to attach to my MacBook pro 4,1. However, the monitor has a flat connector that doesn't seem to fit anywhere on my laptop. Is there some sort of adapter I can get? I've seen similar questions posted, but none with my exact specs.
Or, should I just sell the monitor back to him or someone else?

It says: Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Maybe I'm a total dork. on the right side, I see, back to front: a monitor adaptor (which i use at work to plug in a Dell), an Ethernet port, a square-ish port with a firewire symbol, another firewire (with the 'dog-eared' edge), a USB, and then a tiny tiny rounded little hole that doesn't appear to go to anything. On the other side, I have the magnetic power cord, another USB, and two small round holes - one for DVI?, one for headphones.
This is where I get a little confused. The Cinema Display looks like the one in the bottom right of this page: http://en.wikipedia.org/wiki/Mini_DisplayPort, and the little round port on the left of my laptop has the same symbol, but is the size of the headphone port.
Do I need some adapter from the squareish one to the little round one?

Cinema Display and MacBook Pro - Power Button won't work

I have been using a 20" Apple Cinema Display (plastic model) with a 17" Powerbook and never had a problem. Recently I acquired a 15" MacBook Pro and it's like the power button on the display has no use at all. The only way to turn on the computer is opening the computer lid, turning it on and then closing it. The display also won't shutdown the computer, although the power button light reacts to the touch. The funny thing is that the display settings button work fine. Does anyone has a clue?

Malcolm, thank you for the answer! But I still don't understand why my new MacBook Pro, having exactly the same connector as my older Powerbook had, won't behave the same way? I'm still using the same DVI to ADC adapter, I'm wondering if the new Macbooks maybe have some PIN assignment disabled on its DVI connector. And anyway, shouldn't the power button be able to at least shut down the computer, as long as pressing it would just open the shut down dialog box?

Weird color tint w/Cinema Display and MacBook Pro

I just purchased a new MBP a few days ago and have it connected to my 20" Cinema Display. Here's what I'm doing to get the display ONLY on the Cinema Display:
1.)Start MBP with display connected
2.)Put MBP to sleep and close the lid
3.)Wake the MBP with the attached keyboard or mouse
This then turns off the MBP's display and the picture appears on the Cinema Display. However, when the image is first displayed on the Cinema Display, it has this very strange brownish/orange tint to it for about 2-3 seconds. It then changes back to the correct color.
Is this normal? If so, why does it do this? Anyone else's Cinema Display<-->MBP combo do this?
Thanks!

Run /Utilities/ColorSynch Utility and 'Repair Profiles' ?

I have a 25" Apple Cinema Display and Macbook Pro. Want to use iSight camera on ACD.

When I use Skype or Google+ Hangout, I'm not able to use the built-in camera on the ACD. Is there a preference to switch camera from Macbook Pro to ACD?

I don't know about Google+ but in Skype's Preferences, there's an Audio/Video tab and within that window there's a popup menu for the camera. Does that allow you to select the ACD?

JUST Bought MacBook Pro 17-inch 2.16 Intel Core Duo and NEW to MAC's.

Like the title says I just bought a MacBook Pro and I have NEVER used Mac's in my entire life. I have always been using Windows ever since I was born. But I am heading to college and wanted a change. I was wondering if there is any quick tips or things to know about my MacBook Pro before I get it in the mail? Especially because I've been a Windows person my whole life. Also, I feel like I should have bought the Mac right before I leave for college but that's the end of August and I needed to buy this before I headed to college to test it out. I just don't want to get it and then a newer MacBook comes out. I know that no one knows for sure but do you think that will happen?

Welcome. It will be easier to answer if you say something about what you're interested in and how you might want to use the computer. There are things I do with every new Mac, but they probably wouldn't interest most people. (E.g. I go into the preferences/keyboard/modifiers and turn caps lock into control. I'm an old-time Unix guy who spends a lot of time at the command line.)
Some specific advice on taking a machine to college. This advice all applies to Macs and PCs
* make sure you have a scheme for backing up your data. I recommend using a Firewire disk. There are lots of ways to do the backup. You'll see plenty of discussions in these groups. If you don't want to buy a Firewire disk you can use other media, but generally those aren't big enough or fast enough to let you do a full backup of your machine. You'll need to locate the folders where you save files and backup just those. WIth the Mac you can do bootable backups. If you lose your disk you can actually boot off the Firewire disk and run that way until you get your disk fixed. Note that this works with Firewire but not USB. Despite the advertising, you really want to use Firewire for external disks, not USB 2.
* if you haven't done so already, get Applecare. Portables are much more likely to need repair. If you don't have Applecare the repairs can be quite expensive. Apple has pretty good service.
* make sure you bring all your distribution CDs and DVDs with you. If things go very wrong you may have to reinstall, and you'll need the media with you. (Actually this advice applies more to PCs, where you have to reinstall to recover from a variety of problems. That's less common on Macs, and if you do have to there's a neat procedure -- archive and install -- to preserve your data during a reinstall.)
* make sure you have enough memory. With your machine I recommend at least 1 GB. the default of 512 MB tends to lead to a sluggish machine.
* make sure you understand the security features of OS X. Turn on the firewall. Be careful about opening attachments and browsing to questionable sites. University networks tend to see a lot more security problems than a typical home environment, though home broadband connections are pretty dangerous these days as well.
* check out your school's acceptable use policy and network access policies.
* depending upon your discipline I might recommend installing either Boot Camp or Parallels and then installing either Windows or Linux as a secondary OS. Anyone who is serious about learning computer technology should run Linux (thought not necessarily as the primary OS).
There will always be newer models. A 2.16 GHz Core Duo should be fine for several years. Not necessarily all 4 years though. That's pushing it, particularly with a portable.

Sound Switches Between Thunderbolt Display and MacBook Pro

I have an Apple Thunderbolt display and MacBook Pro set-up with dual screens. I have an iPhone plugged into a dock that runs to the display. When I have music playing out of the display and I disconnect my iPhone, it switches the sound to the MacBook Pro.
1. How do I stop this from happening?
2. If I can't stop it from happening, how do I move the sound from the MacBook Pro back to the display?
There doesn't seem to be any options within Preferences/Sound to change it back.
Thank you.

I've a Spyder4Elite that I use on both my Thunderbolt Display and on my MBP - and, while both are calibrated, they don't - and cannot - 'match' one another, no matter how hard I try.
I suspect that you're running up against the same wall? Different technologies in different displays. I doubt that you'll ever get a perfect match: mine are just 'good enough'.
Clinton

Question about the new 27" LED Cinema Display and text size

Hi, I own the 24" Apple LED Cinema Display and text on the monitor is just large enough for me. Won't text on the new 27" Display be much smaller with its higher resolution?

MANY thanks for the tip.
Now then - all indications are that my Mini will NOT pass audio via the MDP Cable given the age as well as the lack of an HDMI port (I know there isn't one this rig). Unless I am missing something I don't believe there is any adapter out there that will allow the audio to now pass through the MDP Cable if the rig itself was never configured to do so.
Following links in your posting, someone recommended this:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=6331&seq=1&format=2#description
However it seems to be set up to deliver A/V to an HDMI display, and unless I am mistaken, the 27" LED ACD does not have an HDMI in. Although my MacMini does have a S/PDIF Optical Digital Audio Output I don't believe the 27" LED ACD has any kind of separate audio input (either TOS Link or even 1/8 smini stereo).
So I reckon I am SOL with regard to getting the audio onto the new monitor from the Mini and I would need to keep my present speakers set up using the 18/" mini stereo out - but the video should still work......yes?

Hello, I have a Macbook Pro 17'' 2.4 GHz Intel Core i7 (2011). I dont know what happened but the pixels on black or dark areas on my monitor are displayed in a flickering red color, and on white areas are light blue. Any idea??

Hello,
I have a Macbook Pro 17'', 2.4 GHz Intel Core i7 (late 2011). I dont know what happened but the screen shows red flickering pixels everywhere where it should be black, and light blue pixels where it should be gray, I had this problem twice, the first time it just disappeared by itself. Now it's been like this for days, I have really no clue.
Anyone with the same problem or solution?
This is how it looks like:
Thanx

Is that a camera picture or a screen-shot? Is there any difference? i.e., can you capture the problems in a screen shot, or not?

Change MacBook Pro 15-inch Glossy Widescreen Display in MacBook Pro 15-inch Hi-Res Antiglare Widescreen Display

I bought a 15-inch MacBook a month ago, I would change the MacBook Pro 15-inch Glossy Widescreen Display in MacBook Pro 15-inch Hi-Res Antiglare Widescreen Display... is possible? and how much will it cost?

Thanks! but there is a problem, I'm Italian and I live near Milan, and certainly I find it hard to send my mac. An Apple Store will not do this type of intervention?

I have a Mid 2009 15 inch MacBook Pro with 2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended

I have a Mid 2009 15 inch MacBook Pro with 2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended

Awesome! Thank you What about the Corsair brand?
http://www.amazon.com/Corsair-DDR3-Laptop-Memory-CMSO8GX3M2A1333C9/dp/B002YUF8ZG /ref=cm_cr_pr_product_top

I am unable to use airdrop between my 6 plus and MacBook Pro (13-inch, Late 2011) running yosemite.any solutions? thank you

i am unable to use airdrop between my 6 plus and MacBook Pro (13-inch, Late 2011) running yosemite.any solutions? thank you

There aren’t any. AirDrop between the platforms requires that the Mac support Bluetooth 4.0, which wasn’t introduced to them until the 2012 models.
(118296)

2 x 27" LED Cinema Display and MacBook Pro 15-inch: 2.66GHz Intel Core i7

Similar Messages

Maybe you are looking for