2006 iMAC intel core duo Kernel Panic + Black Curtain of Death

I've had this iMAC since 2006 w/o a problem. Lately been getting the "curtain of death" and screen to restart the computer. Saw similar discussions about these Kernel Panics. Brought the iMAC to Apple Store and tech thought it was a bad logic board and recommended not to fix it ($800+). I have trouble, as did the tech getting it to boot. Today I got it to boot and before it crashed again, I managed to run the Hardware Test from the original OS disc 1. This showed no problem in both tests. Did get the panic log (see below) can anyone make heads or tails of this? Thanks
Thu Mar 31 16:24:35 2011
panic(cpu 1 caller 0x00191BE8): pmap-remove: mapping not in pv_list!
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x1422b368 : 0x128d0d (0x3cc65c 0x1422b38c 0x131f95 0x0)
0x1422b3a8 : 0x191be8 (0x3cf8c0 0x0 0x1422b3d8 0x6)
0x1422b428 : 0x193fc8 (0x242df818 0x242dfc18 0x0 0x19ae76)
0x1422b478 : 0x16550c (0x2f5f3a0 0xb0103000 0x0 0xb0183000)
0x1422b568 : 0x165cc0 (0xffe00000 0x0 0x0 0x0)
0x1422b5a8 : 0x13a98b (0x325a950 0x0 0x0 0xffe00000)
0x1422b5f8 : 0x36ecff (0x3308380 0x1000 0x0 0xf350)
0x1422b688 : 0x339740 (0x1422b9a4 0x25482000 0x31a343c 0x0)
0x1422b948 : 0x338c90 (0x1422b9a4 0x30bece4 0x25482000 0x1000)
0x1422bf58 : 0x37b300 (0x330e5dc 0x302e5c8 0x302e60c 0x0)
0x1422bfc8 : 0x19b77e (0x30c60e4 0x0 0x19e0b5 0x30c60e4) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0182af8
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Thu Mar 31 18:59:15 2011
panic(cpu 1 caller 0x001A49CB): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x00000013, CR3: 0x00e7b000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0xffffffff, ECX: 0x042e0a2c, EDX: 0x03be8a18
CR2: 0x00000013, EBP: 0x251abc28, ESI: 0x36c09000, EDI: 0x00000000
EFL: 0x00010286, EIP: 0x0017eac6, CS: 0x00000008, DS: 0x251a0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x251aba58 : 0x128d0d (0x3cc65c 0x251aba7c 0x131f95 0x0)
0x251aba98 : 0x1a49cb (0x3d2a94 0x1 0xe 0x3d22b8)
0x251abba8 : 0x19b3a4 (0x251abbb8 0x0 0xe 0x190048)
0x251abc28 : 0x167082 (0x3be8a18 0x36c09000 0x0 0x202)
0x251abca8 : 0x167617 (0x40c1000 0x276000 0xff0000 0x683518c)
0x251abd18 : 0x18480f (0x40c1000 0x251abd48 0x251abd40 0xb)
0x251abd58 : 0x155eba (0x40c1000 0x40073c0 0x423c69c 0xb)
0x251abdb8 : 0x12b4ee (0x40073a0 0x423c668 0x0 0x0)
0x251abdf8 : 0x124b17 (0x4007300 0x0 0x2c 0x251abedc)
0x251abf08 : 0x195f2e (0x251abf44 0x0 0x0 0x0)
0x251abfc8 : 0x19b81e (0x42792d4 0x0 0x19e0b5 0x42e1b20) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff838
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Thu Mar 31 19:49:26 2011
panic(cpu 0 caller 0x001A49CB): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
CR0: 0x80010033, CR2: 0xeeeeef02, CR3: 0x00e71000, CR4: 0x000006e0
EAX: 0x00000001, EBX: 0xeeeeeeee, ECX: 0x0473e2c0, EDX: 0x04500cc0
CR2: 0xeeeeef02, EBP: 0x252e3df8, ESI: 0x00709000, EDI: 0x00000000
EFL: 0x00010286, EIP: 0x0017eac6, CS: 0x00000008, DS: 0x252e0010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x252e3c28 : 0x128d0d (0x3cc65c 0x252e3c4c 0x131f95 0x0)
0x252e3c68 : 0x1a49cb (0x3d2a94 0x0 0xe 0x3d22b8)
0x252e3d78 : 0x19b3a4 (0x252e3d88 0x0 0xe 0x48)
0x252e3df8 : 0x160971 (0x4500cc0 0x709000 0x0 0x1)
0x252e3f48 : 0x1a4c3e (0x4e10c78 0xa32a9000 0x0 0x1)
0x252e3fc8 : 0x19b2d4 (0x46b5468 0x19b2c5 0x8 0x46b5468) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff9a8
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386

If you attempt to boot from an external HD that is set up as a bootable clone and it fails to boot that almost certainly points to the Mac having a hardware. The bootable clone would have had to be setup prior to the failure. Many people (myself included) keep redundant backups, I would recommend doing the same when you have either repaired or replaced the current machine. Macworld runs articles where users describe their own backup strategies, I'd recommend reading them and then deciding which works best for your needs.
http://www.macworld.com/article/157414/2011/02/mybackupplanlex.html
http://www.macworld.com/article/156643/2011/01/howi_back_up_frakes.html?lsrc=top1
http://www.macworld.com/article/141363/2009/07/backup.html
Roger

Similar Messages

  • How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store.

    How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices?  Mountain Lion is not an option for my older model and Lion is no longer available at App store. 

    Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).

  • IMac Intel Core Duo: Which Install DVD disks should I be looking for?

    I have an iMac Intel Core Duo (2 Ghz, 20") model. This was sent to me from Apple as a replacement for my iMac G5 when it had problems a couple years ago. I just realized today that they did not send me OS install disks for it; I still have the iMac G5 install disks though.
    What iMac install disks should be looking for to purchase? Are they specific to an Intel Core Duo? Would any iMac Intel installation disk work?
    Thanks in advance.

    You may be able to contact Apple and have them provide a replacement set for a nominal fee.
    If it's the Core Duo white iMac from +early 2006+, it came with Tiger (10.4). Therefore, you can get install Leopard or the current Snow Leopard on it. You just need the standard retail disc.
    Would any iMac Intel installation disk work?
    Usually, installation discs that come with Macs (the grey ones) only work with that specific Mac model. A retail disc (the ones that are sold separately) will work with any supported Mac model.
    There is another difference. The disc that is included with Macs also have additional bundled apps, such as the iLife suite. The original included disc for your iMac would have iLife '06, which is two versions old, so it may not be that much of a benefit today (iLife '09 is the current version).

  • Imac intel core duo random shutdown

    My iMac 2006 (late) intel core duo 2ghz shuts down regularly after brief periods of activity. As soon as I turn it on, the HD fan spins at around 5000rpm according to istat pro. All other fan speeds and temperatures are normal.I need to unplug it for at least an hour in order to successfully boot up again, an then the same thing happens over again. A new HD was recently installed with the Mac OS extended (journaled) scheme on , and someone mentioned it should have been as GUID scheme. Can that be a possible culprit ? I dusted it all out, changed the ram for new and even changed the power cord.

    it should have been as GUID scheme
    Yes - any Intel Mac needs to be GUID partition scheme in order to be bootable. So, if yours boots up without a problem, then it should be ok. Check Disk Utility (Applications > Utilities).
    What OS version are you running? I'd suggest booting from your disks (not knowing which version I can't be specific - but one should have AHT (Apple Hardware Test) included. See these instructions on how to run it (use the extended test) and post any messages or results you get:
    http://support.apple.com/kb/HT1509

  • PowerMac G5 vs iMac Intel Core Duo

    Hello, I currently have a PowerMac G5 Dual Core and am thinking of getting another computer. I have a question. In terms of performance, what is faster, the G5 (Dual) on the PowerMac or the Intel Core Duo on the iMac (running at the same speed).
    And at the bottomline, what would be the machine that I want for gaming, publishing, and video editing? The PowerMac G5 (Dual) or the iMac with Intel.
    Thanks for the assistance!! Have a good one.
    P.S. Are there any plans of releasing a PowerMac with an Intel processor.
    PowerMac G5   Mac OS X (10.4.6)  
    PowerMac G5   Mac OS X (10.4.6)  

    (Oh...right...sorry for mentioning that) Thanks for hte response!
    Anyways, I just want a computer that will not be outdated for a while. I don't want to purchase the G5, and then months down the road, not see the G5 in production anymore.
    One thing about the iMac I'm not too fond of is the lack of upgradibility (or so it seems so). Due to it's size, it would be very difficult for someone to upgrade it's internal components.
    I will be purchasing either today evening of tommorow, and I want to know what will be my best choice for the future, the iMac Intel Core Duo or the PowerMac G5.
    I always thought of the PowerMac G5 as a beast, and I still do, but some of the latest reviews and benchmark tests I have seen have said that the iMac (with Intel Core Duo) has performed very close to the PowerMac.

  • Quark 6.5 crashes when opening existing files on iMac Intel Core Duo

    I just switched from a G4 titanium laptop to an Intel iMac and Quark works fine except when I try to open a file that I created on the laptop (same Quark 6.5). It crashes. I talked to Quark and they said that I need to open the files on a PC and resave (I don't have a PC or a friend with a PC and Quark not that I'd send them all my files even if I did). I've tried resaving and renaming files with no luck. I tried reinstalling both the operating system and Quark (both 6 and 6.5) with no luck. Has anybody else had this problem and found a work around? I want to sell my laptop but I can't until I know I can access the hundreds of client files I have there.
    iMac Intel Core Duo   Mac OS X (10.4.6)  

    Sorry I have no real experience with this, just a thought. Did you use migration assistant to move the old files over from your G4 to your Intel? And did you then perform a "Repair Disk Permissions" upon the entire hard drive from within Disk Utility's "First Aid" panel? (located at Applications>Utilities>Disk Utility)
    If the file move still is causing you a problem afterwards, you could try and work around it by moving the files in a different way. As a test, create a small file on the G4 and then email it to yourself from the G4. Receive that message into the Intel and see if the Intel can then open the file from inside Mail. This might avoid any "bias" created during the move from old to new Mac.

  • IMac Intel Core Duo Hard Drive Replacement

    I may need to replace my iMac (Intel Core Duo) HD soon; I'm wondering whether the Geek Squad does work on Macs. Also, is this something a person can do themselves with good directions, or is that risky. I've put in memory, but think the HD is probably a step up. I have everything backed up and would get all my stuff back on HD myself. Has anyone had experience with Mac repair here?
    Solved!
    Go to Solution.

    Welcome, Selia!
    We certainly do work on Macintosh computers.  The criteria is: "Is the part user-serviceable?"  We would need to sendthe unit in for upgrade to our repair center if it is not something Apple has in their DIY section of their website.  This is toensure consistency and to avoid any issues if still under warranty. Typically only Mac Book laptop hard drives areserviceable in the store.
    Either way, I recommend letting an Agent assist you in the store.  Let us know if you need further answers.
    Matthew|Community Advocate | Best Buy® Corporate
    Visit our Channel on
     Private Message

  • External Drive Recommendations for iMovie '09 and iMac Intel Core Duo

    I just got a new iMac Intel Core Duo, and loading up on 4 gig of Ram. Going to get an external drive to house video footage, and wondering if this model might be ok. I understand firewire is usually better than usb drives, but am looking at one that is USB 2.0 with of speeds up to 480 Mbps and transfer rates up to 1.5 Gbps. Claims it's almost twice as fast as FireWire 800.
    Would this work well for iMovie, editing HD footage?
    Thanks in advance for your replies.

    LOVE this Fantom drive. Very quiet and an amazing price for 1TB with all interfaces.
    http://www.macmall.com/macmall/shop/detail.asp?Redir=1&description=FantomDrives%2DG%2DForce+Quad+Interface+1TB+External+eSATA%2FFireWire+800%2FFireWire+4 00%2FUSB+2%2E0+Hard+Drive%2DExternal+HardDrives&dpno=7350333
    Or check out this deal for their 2TB version
    http://www.macmall.com/macmall/shop/detail.asp?Redir=1&description=FantomDrives%2DG%2DForce+MegaDisk+2TB+External+Triple+Interface+%28Firewire+800%2F400+ %2B+USB+2%2E0%29+Hard+Drive%2DExternal+HardDrives&dpno=7304498

  • EA Game (Harry Potter Deluxe Edition) will not play on iMac Intel Core Duo

    I have repeatedly tried opening the EA/Aspyr Harry Potter games (Sorcerer's Stone and Chamber of Secrets) on my iMac intel core duo. It fails to open, with all attempts ending in a window that tells me it has failed and offering the option to cancel, retry, or report problem to Apple. This occurs with both discs/games. Is the software simply not advanced enough for the new iMac? Has anyone opened this at all?
    PowerBook G4   Mac OS X (10.4.7)  

    They are both Aspyr ports of EA games. I've run both on my G4 Macs in the past but can't comment on their compatibility with the Intel processor. 
    mrtotes

  • Imac intel core duo 20" bug graphics

    bonjour,
    jespere que vous comprenez le francais
    j'ai un imac intel core duo 2ghz, 1go de ram dd2 osx 10,4,9
    j'ai un soucis quand je joue a world of warcraft, l'ecran se brouille, ne nombreux traits apparaissent, impossible de voir en fait le jeu correctement, obligé de faire un pomme+m et de revenir en full screen apres, et ca repart.
    sachant que le jeu passe en full quality a 30fps a peu pres, j'ai essayé de tout baissé au niveau qualité et rien a faire.
    je n'est pas eut le temps d'essayer d'autres jeux.
    je n'est pas essayer en redemarrant sous windobe.
    l'ordinateur est encore sous garantie.
    dites moi tout ce que vous savez
    merci d'avance.
    a bientot.

    Depends on how intensive you plan on getting with the iMac. For the most part, it should run pretty well. When the Adobe products become universal they should fly. I currently run all the same software plus Maya on my iMac G5 2.1 GHZ w/o a problem, so they should run just as well on the intel (more so when all apps become universal). I actually plan on selling the G5 and picking up the intel version so I can run boot camp and 3D Max as as well.

  • IMac Intel Core Duo and ATI Video Drivers

    I was wondering if the latest ATI Catalyst drivers are compatible with the X1600 that comes in the Intel Core DUO iMacs. I wasn't sure if the driver needed to come from apple or not

    Nope. The latest Catalyst drivers 6.X are not compatible with the iMac vid card. You need the driver on the disc that Bootcamp install creates. It's a ver 8.x driver made especially for our Radeon Mobility x1600's.

  • IMac Intel Core Duo - what software works and what doesn't???

    So I decided to start this post/topic to get feedback from everyone who uses their Intel based iMac for all different reasons and all the various sortware that people use. This includes software, games, freeware and such.
    Here's my 2 cents:
    Adobe CS2 software works fine except for Adobe Version Cue2. In other words, thus far InDesign CS2, Illustrator CS2, Photoshop CS2 and ImageReady CS2 seem to work fine. Probably a bit slower than on the G5's but not noticeably different.
    Anyone else have feedback on their software that you use daily???

    Toast 7 works brilliant on my iMac Core Duo. A lot
    better than my Powerbook G4.
    EyeTV 2 is working fine on my Intel Core Duo as well.
    I'm new to Mac, and bought an eyetv (PX-TV402U for Mac) with my iMac core duo. However, it doesn't run worth a hoot, can get some channels but lots of snow in picture. I'm sure I read somewhere on Plextor's site about a software issue with new core duo, but can't find it now and can't get a responce from Plextor. You say yours is working fine, is that because you have Toast 7? I'm stumped at the moment. Got any suggestions?

  • Imac Intel Core Duo

    Can I install arch without problems in the new apple iMac with Intel core duo processor?
    Has anyone tried that?
    That machines look really really nice!!
    Regards

    Toast 7 works brilliant on my iMac Core Duo. A lot
    better than my Powerbook G4.
    EyeTV 2 is working fine on my Intel Core Duo as well.
    I'm new to Mac, and bought an eyetv (PX-TV402U for Mac) with my iMac core duo. However, it doesn't run worth a hoot, can get some channels but lots of snow in picture. I'm sure I read somewhere on Plextor's site about a software issue with new core duo, but can't find it now and can't get a responce from Plextor. You say yours is working fine, is that because you have Toast 7? I'm stumped at the moment. Got any suggestions?

  • Mountain lion and imac intel core duo 2

    hello
    i have an imac 8,1 intel core duo 2 -2,66gz with IOS 10.5.8 can i install Mountain Lion?
    thank you
    BJ

    System requirements can be found here:
    http://www.apple.com/osx/how-to-upgrade/
    You will first need to get your system to Mac OS X 10.6 so you have access to the Mac App Store, the only place from which Mountain Lion is available. The 10.6 installer disk can be purchased from the online Apple Store.
    Regards.

  • Does 2GB ram stick exist for iMac Intel Core Duo?

    looking to max out my iMac on Ram (at least 2GB) as i Find it real slow with the 512MB it comes standard with.
    1) Is my only option to buy 2 x 1GB or is there a 2GB stick on the market?
    2) If going for the 2 x 1GB am I going to see a significant difference beyond just having the standard 512MB paired to a new 1GB?
    Thanks

    I bought 2 1GB sticks of Ram, installed them... ran my iMac 20 Intel core duo, then went to 1.5 GB of RAM. Honestly, I don't see the advantage of going to 2 GB. Personally save yourself the $$$ and wait about a year or 2 then upgrade. I am returning 1 stick which I paid 109 for. BTW Fry's electronics has Corsair 1 GB PC5300 sticks for 109.00 with a 20.00 rebate. Cosair if definitely a name you can trust.
    Personally 1.5 GB is te magic number.
    To comment on GLO's comment about pairs: There is no reason to match your memory. These iMac's do not run in dual channel mode. I contacted AppleCare and was told that there is no advantage running paired sticks of memory on the new machines.

Maybe you are looking for

  • Audio Levels dropping while Digitizing

    We're editing on 4 computers with an XSAN server using Beta SP machines as component input as well as firewire DV machines. FCP 5.1.4 My question is this. We seem to 'lose' about 5db from the machine to the computer. In other words something thats hi

  • Changing bit rate from 128 to 192

    I'm getting shure e4 headphones and want to experience the full potential of its sound, so i want to change the bit rate from standard 128 to 192. Can anyone give me directions on how to do this? also can you adjust bit rate to higher than 192?

  • Error in Logic when and endwhen

    Hi Experts, My logic is erroring at (UJK_VALIDATION_EXCEPTION:Invalid when/endwhen: Line #25 : Invalid when/end) which is ENDWHEN LOOKUP(PPO) *XDIM_ADDMEMBERSET ACCOUNT_CMP = AC.RECEIPTS,AC.PRODVOL,AC.RAWMATERIALS *XDIM_MEMBERSET RPTCURRENCY = <ALL>

  • [svn:fx-trunk] 12537: Fix for FLEXDOCS-1157 - Spark List-based comps have documenation saying they don 't support BasicLayout

    Revision: 12537 Revision: 12537 Author:   [email protected] Date:     2009-12-04 09:41:47 -0800 (Fri, 04 Dec 2009) Log Message: Fix for FLEXDOCS-1157 - Spark List-based comps have documenation saying they don't support BasicLayout QE notes: - Doc not

  • Missing Sharpen and Noise Reduction palettes

    I've just exported some pictures for the web from Lightroom 5 which had to be downsized considerably. I now find that the sharpening and noise reduction palette has disappeared entirely from the right hand tools panel. What's going on? I've tried qui