2008 Mac Pro and Apple Cinema Display 27"

Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

Similar Messages

New Mac Pro and Apple Cinema Display

Warning, for those of you upgrading to the new Mac Pro and you plan on using your old Cinema Display, you will not get the maximum resolution out of the display. In fact, you only get 1650 x 800--which of course is way under utilizing install resources and on top of that not a great picture. Even using recommended set up (mini display to DVI adaptor) does not help. You need a Thunderbolt Display for best video performance. Unless someone out there knows a way to do this--be prepared also to buy a new display.

Turbostar, it is the Apple 30 inch cinema display. Yes it works but the max resolution is 1650 X 800 which while acceptable does not get me 2560 x 1600 which my D500 GBUs would deliver. The new Pro is optimized for a Thunderbolt display, I am using the correct connection protocols as recommended by Apple on their web page for this system. There is a specific note in Apple support noted that Cinema displays will only provide xxxx resolution on the new Mac Pro's. Corsair.

How do i connect my Fujitsu Tablet + mac Pro to Apple Cinema Display 23'?

Dear Mac users
thanks in advance for your help.
I currently own:
• Fujitsu T 4220 (tablet) – Mobile Intel 965 Express – 60 Hertz – goes up to 1680*1050 (guess SXGA) – (it has the following other supported resolutions: 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600)
• Mac Pro
• Apple Cinema Display 23’
What I would like to do is, please refer to the jpeg posted on http://www.flickr.com/photos/34831802@N06/3234336204/, connect – at the same time – my tablet pc and my Mac Pro to the 23' Apple Cinema Display and switch (when I need) from tablet to MacPro using the same 23’ ACD. Top would be to be able to switch for one to the other while they’re both switched on. Usually on 2 pc’s with vga I’d use a switch A → B (in the jpeg it would be I → E) with a selector.
Have been reading different posts such as: http://discussions.apple.com/thread.jspa?messageID=8000641&#8000641 or http://discussions.apple.com/thread.jspa?messageID=6530475&#6530475 or
http://discussions.apple.com/thread.jspa?messageID=7417258&#7417258
+ others on the net and have (hopefully) understood that:
a) from Vga to Dvi I need a converter such as Geffen’s or similar
b) the problem with ACD 23’ is that it has only 3 resolutions: 1024*640, 1280*800 or 1920*1200
In the attached image I guessed a connection in order to connect – at the same time – both the machines to the 23’ ACD:
1) my fujitsu tablet (i in the image) has to be connected, with a Vga cable (h), to the Vga → Dvi converter (g).
2) from the Vga → Dvi converter (g) I need to connecto to the Dvi switch (c)
3) easier is connecting the Mac Pro (e), since I only need a Dvi cable (d) to connecto to the Dvi switch (c)
4) the Dvi switch (c) will then be connected to the 23’ ACD with a Dvi cable
Now, my questions are:
a) is the solution described above (Vga cable (h) to the Vga → Dvi converter (g)) a good solution or should I use, instead, a docking statione that comes with a Fujitsu Port Replicator (FPCPR65) which has a 1 x DVI-D port?
b) Given the 3 resolution accepted by the 23’ ACD (1024*640, 1280*800 or 1920*1200), I do not understand if I can use my tablet through a Vga to Dvi Converter and at which resolution (my tablet has the following other supported resolutions: 1680*1050, 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600).
c) Is there a way, also using an external video card or converter, to bring my resolution from 1680*1050 to 1920*1200? (the 16:10 ratio is in fact the same = WXGA (1280x800), WXGA+ (1440x900), WSXGA+ (1680x1050), WUXGA (1920x1200)
d) Talking about Vga → Dvi converter (g), am aware of the gefen product. Can you please list some others that might be good as well?
e) And how about the DVI switch? Any will work? Any particular suggestion?
Thank you very much for your help.
If you have any other suggestion, please let me know.
Regards,
Emil

Noone to help me?
No ideas?
Thanks,
Emil

New Mac Pro and LED cinema display

Sorry if this has been asked before, I tried searching for it but none of the topics answered my question specifically enough.
I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro and what happens to the power cable that's attached to the LED display?

I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro
Yes. All the standard cards that come in the Mac Pro have one Mini DisplayPort. The 24"LED display will plug into that.
and what happens to the power cable that's attached to the LED display?
It is not used if you don't have a MacBook.

ATI Radeon 9800 Pro and Apple Cinema Display compatibility

I'd like to buy an Apple Cinema Display for my 5-year-old Power Mac G5 with an ATI Radeon 9800 Pro, but I'm having trouble understanding what I can and can't hook up to my system.
I was thinking of getting a 30" display, but the Apple Store says I need a Dual-Link DVI, which I don't think my graphics card supports, but the Store also says I need an ATI Radeon 9650 or better, which I imagine the 9800 Pro is.
I've looked at the ATI site for data on the graphics card, but their online manual shows a completely different set of connections on the card. They show VGA and S-Video out ports that mine doesn't have.
Does my ATI Radeon 9800 Pro have dual-link? If so, can I use the 30" display? If not, can I still use the 30" display?
If I can't use the 30" display, are there any compatibility problems with the 23" Apple Cinema Display?

The 9800 is faster than the 9650, but it doesn't have a dual-link DVI port.
Make sure you were looking at the Mac section of ATI's site. PC and Mac versions of the same card may have different port configurations.
AGP cards with dual-link DVI, starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI) (Some reports of problems with Leopard)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon 9650 XT (Single-link, dual-link DVI)
<http://www.mac-pro.com/ATI-Radeon-9650-256MB-for-G5-661-3593?sc=2&category=42>
ATI Radeon 9600 Pro PC & MAC Edition RoHS 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>
A 23" will work with any G5 card.

New Mac Mini and Apple Cinema Display

I have just upgraded my Mac (G5 PowerMac) to a new Mac Mini. I am still using my Apple Cinema display - but I cannot not play all the purchased movies that I have on iTunes now...????

Greg,
Are these movies HD? If they are, you might be having a problem with HDCP which is copy protection that won't let you view movies if all of your equipment is not HDCP compliant, which probably is your Cinema display. I also have a late 2012 Mac mini with an older Apple 20" Cinema display and cannot watch HD itunes movies. You will have to watch in standard definition. Of course you might have a different problem, but your question seemed similar with my situation. What is strange is that you were able to watch from your G5 Powermac. Maybe the power PC chip allowed viewing as opposed to intel chips, which I think intel created HDCP. Somebody on these boards probably has better answers then me ;-)
Rob

15" (late 2008) macbook pro and 30" cinema display??

Im looking to buy one of the new macbook pros, and I know that you need the$100 dual link cable to get it to work with the older apple displays.
With that cable what is the max resolution I will get on a 30" cinema display?
The max res for the 30" is 2560 x 1600 pixels, but I have heard that you may not be able to get real high rez with the 15"
anyone know, I would appreciate the help....
-bill

You'll get 2560 x 1600 - that's the max resolution of the display, and it's the max resolution of dual-link DVI (at least, at the standard refresh rate).

Best stand for MacBook Pro and Apple LED Display

I am buying a MacBook Pro and Apple LED Display tomorrow. I want to have a two display setup, similar to what I have seen in the Apple Store. I believe they used a Griffin Elevator. I want to make sure of two things: that the stand is sturdy enough so that my laptop won't slide off of it and that I can adjust the stand/monitor so that the tops are level (so that moving my mouse from the laptop to monitor and back is smooth - i.e. the cursor doesn't jump up or down.
I like the fact that I can use this setup to go mobile very quickly, but what about my direct Ethernet connection. I wish there were a stand/dock such that I could hook everything up to it and then just undock the entire machine.

How did you solve the problem of closing the Macbook Pro when it was connected to the display and preventing it from going to sleep?
I am thinking about buying one. When I went to the local Apple Store the tech guys told me that it would be necessary to keep the laptop open slightly when connecting it to the display. They said it was something to do with cooling. It didn't sound right to me. I'm sure that Apple didn't solely intend for the Cinema Displays to be used by Mac Pro and Mac Mini users.
There must be a simple way to "dock" or connect a Mac laptop (Macbook Pro or Macbook) to an Apple Cinema display or any other display with DVI input while keeping the laptop closed with an external keyboard and mouse connected and still be able to use the SuperDrive.
I'm very curious about how you handled this.
All the best for now,
Ambrose

I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?

RE: SATA Bus speed:
Typical Rotating drives available today, whatever their SATA spec, can source data off the spinning platters no faster than about 125MBytes/sec.
SATA 3 is rated at 6G bits/sec, which theoretically is about 750 Mega Bytes/sec
SATA 2 is rated at 3G bits/sec, which is theoretically about 375 Mega Bytes/sec
SATA 1 is rated at 1.5G bits/sec, which is theoretically about 187.5 Meg Bytes/sec
None of the SATA Busses is a bottleneck for consumer Rotating drives you can buy today. Trying to speed up the SATA Bus will not provide any real-world performance increases for Rotating Drives.
https://discussions.apple.com/message/22690384

I just installed a 3TB hard drive on an early 2008 mac pro and the system doesn't recognize the drive. What now?

I just installed a 3TB hard drive on an early 2008 mac pro and it is not recognized/not visible. What now?

If the drive is correctly installed on to the sled, and the mounting screws are snug, not tight, and the sled is inserted properly so that all the roof-tangs catch as the sled is inserted, failure to show up in Disk Utility means the drive is not useable.
A Bug in 10.8.4 and later precludes Disk Utility ERASE-ing large drives in Internal bays. Use PARTITION only, and create one new partition, GUID partition Map, Mac OS Extended (journaled) Volume.

Dual Display Problem - Mac Pro / 23" Apple Cinema

Hey guys, I'm having a bit of a hard time right now. Here's my situation. I'm using my Mac Pro with a primary HD Apple Cinema Display 23". I just recently stumbled upon a Sony HS95P. I've used this monitor before as a second display a few years back. I bought a " DVI 24+1 male to VGA female adapter DVI-D DVI-I DVI-A " and plugged it into my computer, no problem. Display shows up in system preferences, when I check mirror displays it takes the resolution of the 2nd display and the Sony flashes. However no screen, Blacked on the Sony. When I set up the displays to run into eachother, I can venture my mouse over onto where the other monitor would be, however it's black on the Sony.
What could be the problem? I didn't buy the Apple adapter, but could this REALLY be that serious of an issue? I didn't use it in the past, atleast I don't think I did.. Also could it be the OS? I'm using 10.6.8. Any help or advice/things to try would be awesome... I have two DVI slots in the back of my Mac Pro, gfx card is a NVIDIA GeForce 7300 GT. Thanks guys.

I'm back. Got my Mac Pro back from repair today. Ahhh...25" screen. However, they (the Apple Repair People) have put a new GeForce 8800GT in, to replace the old one.
And the final bill was $380 CDN ($40 for work, the rest for the card, around $300.)
What's Apple's policy on graphics card replacement, even if the customer is paying for it? I thought I asked for a new ATI 5770 card, but maybe I was wrong. I don't think I can take her back in and ask 'em to put a better card in there, and only ask for a bit more to cover the difference in price. I've got a feeling it doesn't work like that.....
thanks
John B

Pixel Distorsion: MacBook Pro and 30" Cinema Display

Connecting the MacBook Pro to the Cinema Display using the Dual Link DVI Adapter (USB from Display plugged in Adapter, Adapter USB plugged in USB Port > not next to Mini-DVI Port) produced wild coloured Pixel Lines in the Dark Areas (really annoying) and starting After Effects CS4 it even gets worse: The full Interface is blinking green on the edges of each Panel.
Pleeeaaaaase help!!

I have the same problem with my 30" HD display and the new 15" MBP. However, I did not have this problem initially. Until yesterday I had been fortunate not to experience issues (see reviews of the dual link adapter at the Apple store) regarding the 30" diplay. However, after contacting applecare about an unrelated issue, the technician had me restart holding the "shift" button. He said this would "correct a lot of stuff". Well it didn't seem to do anything except cause my 30" monitor to exhibit these same problems that everyone else is complaining about! Apple, please address this flaw!

Early 2008 Mac Pro and the 5870

Several sources has stated that this card will work in the Early 2008 Mac Pro, but I am having issues. The card tests as bad and on restart the card is not seen as being installed. I can Screen Share and verify through System Profiler that the card is not seen by the system. Is anyone else having this issue, or is it just my luck?

and this is an Apple version card, right? not a PC.
What other video card did you have etc?
Apple ATI 5770 and 5870 work with 10.6.4+ in all Mac pro models.
ATI Radeon HD 5870 Upgrade
Radeon 5870 vs 5770 GTX 285 4870

Adobe Acrobat 9 Pro on both my Apple Mac Pro and Apple MacBook Pro

I think I found the answer to my question: "May I install my copy of Adobe Acrobat 9 Pro on both my Apple Mac Pro and on my recently purchased Apple MacBook Pro?" I think my question was answered in reading the text of the agreement for use of this site in the following:
"You may activate the Software on up to 2 devices (or virtual machines) at a time, if these activations are associated with the same Adobe ID for the same individual, unless stated at http://www.adobe.com/go/activation . However, you may not use the Software on these devices simultaneously."
If this is correct, would you confirm. I know how security conscious Adobe is with their software.
Thank you! Be Safe!
Ken

Hi kennethf71183385,
Thank you so much for asking! Yes, you are entitled to activate your copy of Acrobat on two computers. Please see Activation & Deactivation Help - Adobe Support for more information about activating Adobe software!
Please let us know if you have additional questions.
Best,
Sara

HT6114 I just updated the last version of OS X Mavericks on my Mac Pro and my Thunderbolt display is not working correctly

I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help

Reset the NVRAM/PRAM and Reset the SMC, then try again.

2008 Mac Pro and Apple Cinema Display 27"

Similar Messages

Maybe you are looking for