2008 SR2 Terminal Server

We are currently converting from Quark 8.5 to In-Design CS5.5 volume license,. We have terminal servers a farm of 10. I installed In-Design CS5.5 on one of our terminal servers as a testing base. Had about 4 users remote into the terminal server, and launch In-Design CS5.5, they all started to compliant after a ten minute delay on startup that the application was taking extremely slow, in looking at the CPU it was at 100%, this is running 8GB of RAM, once In-Design CS5.5 was launched the CPU was at a normal rate, then had two additional user launch In-Design CS5.5 and again the CPU got to 100% to the point where all other 4 users went to a craw for about 8-10min till the 2 other users got In-Design CS5.5 up and running.
I have read that giving full privileges to:
C:\Program Files\Adobe 2. C:\Program Files\Common Files\Adobe
Gave users local admin privilages
and that did not help, I have spent countless hours trying to figure out why In-Design CS5.5 goes to a craw at start up, no matter how may plug ins I remove it sticks to 100%. I also did a registry key to disable to CSLive and no help.
I was hoping that someone out there has a similar environment as we do and could shed some advice:
Terminal server specs are:
Windows Server 2008 R2 Enterprise
Processor 2.40Ghz (2 processors)
Ram-8gb
Systems Type 64bit OS
Regards Max

Are you able to create a new report and select "a" printer?
If yes and you use the same printer in the existing report, can you print?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Similar Messages

Windows Server 2008 R2 Terminal Server and Outlook 2013 Profile

Really hoping someone can offer some advice on this one as I have wasted far to many cycles trying to figure this out.
Company I work for recent purchased another company and we are in the process of bringing them into our network. They currently run a a 2008 R2 terminal server where all users connect to for there day to day work. A number of applications
are installed including Office 2013.
All users have Outlook 2013 configured to access their exchange server for email and this works fine.
The first step in bringing them into our fold is to add an email account for Our Exchange server without removing their existing exchange configuration or Outlook Profile. So the one profile will have both exchange accounts listed and they can
continue to get email from their server but as well email from our domain.
I created a MSP file and tested pushing this out using PDQ Deploy to a few workstations here in our office and it works fine. I then started to work on deploying in their environment. PDQ Deploy will not work as they are all terminal Services
Clients. So I tried to push out via GPO. I created the GPO Initially wanting to use a package and apply that GPO to an AD group. However it will not let me deploy a MST as a package. So I then tried moving it to a script that would
run at logon. That too is not working.
I know I could enter install mode then run the MSIEXEC.EXE \config.MSP but that takes away the ability to control the role out.
Any other ideas on how to get this done.

Hi,
Your issue seems to be out of the scope of this forum. We only focus on issue about RDS/VDI deployment, management and operations. For Oultook related issue you can ask to our MS Office Forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server

Hi,
I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
Thanks,
Bjorn

Hi,
I did the test and could install the Windows Search Service without problem.
Which role did you installed on the terminal server?
Did you try to install it on another windows server?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

No Default Mail Client Error with Outlook 2010, Server 2008 R2 Terminal Server, and TAM

We are running a software package on a Windows 2008 R2 Terminal Server called TAM (The Agency Manager) along with Outlook 2010. The application uses a MAPI connection to retrieve mail data from Outlook to be able to send and receive messages inside
the application. On our individual PC's this works just fine, but on the Terminal Server users we get the message "Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook
and set it as the default mail client."
I've tried the steps listed in KB 813745 which tells you to delete the registry keys and run a repair in Office, but that didn't resolve the issue. I've searched on this issue, but haven't found anything useful. Any suggestions would be much
appreciated.

Try to set DEP and add outlook.exe. I had outlook 2007 same problem. With DEP enabled and outlook, word en excel also added to the list it worked again.
You can find it under this computer, properties, then change settings. Click advanced tab and then select the first "settings" option.The click the "Data Execution Prevention" (DEP) and select the last option and add the office programs
there.
Hope this helps.

Windows 2008 R2 Terminal Server.

Hi,
I was wondering about running Adobe Acrobat Std X (10) on a Windows 2008 R2 Terminal Server for two users. Anyone else that have any experience with this? Best solution?
Best regards
Vegard

Although Server 2008 R2 is a supported install platform, you'll have to be extremely careful about licensing - Acrobat is not a server product, so the only person who would be legally permitted to connect to it would be the one who owns the copy of Acrobat in question. Sharing a copy between multiple users is not an option; for that there are dedicated server-based solutions such as LiveCycle.

Word 2010 - "Connecting to printer" message when opening documents at Server 2008 R2 Terminal server

Our users experience sometimes the message "connecting to printer" while they open a document in Word 2010 (32-bit) on our Server 2008 R2 Terminal Server. This is behavior
isn't consequent but random. The default printer in this environment is a Net2Printer-printerdriver (1.16) which redirects the print jobs (in PDF-format) to the local client's default printer. This feature works well. We don't want to change the default printer
because this is the right one to use by our users.
After a long seeking trip on the internet I've found the Microsoft hotfix KB974991 which can fix this issue for Word 2007. My question is, is this also usable for Word
2010 (32-bit) and if not, is there maybe another fix for the 2010 version available?
Any other suggestions or workarounds are welcome!

Hi,
Please change following options test if it works:
Ÿ
Print proofs quickly
Enable the Draft output option. When you use this option, the document prints with minimal formatting. Therefore, the document
may print faster. This option is ideal for printing proofs.
To enable the Draft output option, follow these steps.
Note Some printers may not support this option.
Start Word.
Click File, and then click
Word Options.
In the Word Options dialog box, click Advanced, and then scroll down to the Printing
section.
Click to select the Use draft quality check box, and then click OK.
Ÿ
Use the background printing option that best fits your requirements
When background printing is enabled, you can continue to work in Word while your document prints in the background. Background printing uses additional
memory, and your document may print more slowly.
When background printing is disabled, your document prints faster. However you cannot work in Word until the print job is completed. If you do not have
to continue to work in Word while your document prints, disable background printing to speed up printing.
To do this, follow these steps:
Start Word.
Click File, and then click
Word Options.
In the Word Options dialog box, click Advanced, and then scroll down to the Printing
section.
Click to clear the Print in background check box, and then click OK.
Best regards
William Zhou
TechNet Community Support

How to add Windows 2012 R2 RDS to Existing Windows 2008 R2 Terminal Server

I currently have a Windows 2008 R2 Terminal Server running and I am looking to add a Windows Server 2012 R2 server to it. All I see when I google the setup is only for Windows Server 2012 R2 RDS, cant find anything to integrate with a current 2008 R2 Terminal
Server.
Can anyone help with this or point me to a blog I possibly missed?
Thanks.

Hi,
Thanks for your comment.
Yeah, agree with diramoh; as already commented. If you want user session from RDS Server 2012 R2 then you need to install RDS License role on server 2012 R2, purchase and install RDS CAL (per user or per device) according your requirement and then you
can use user session for server 2012 R2 and also for lower version.
But as you already have Server 2008 R2 RDS CAL, then with that you can simply access lower version but can’t manage Server 2012\R2.
For more information, you can refer following document.
Licensing
Windows Server 2012 R2 Remote Desktop Services
Hope it helps!
Thanks.
Dharmesh Solanki

Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
"Event 1000
Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x0eedfade
Fault offset: 0x0000c42d
Faulting process id: 0x3718
Faulting application start time: 0x01cf9ac7922487e9
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
Also:
"Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
Exception code: 0xc0000006
Fault offset: 0x0001d598
Faulting process id: 0x2bc8
Faulting application start time: 0x01cf99297ee1742f
Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
And:
"Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x2aa0
Faulting application start time: 0x01cf988e6770e619
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: unknown
Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

Hi,
Thank you for posting in Windows Server Forum.
Explanation
The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
User Action
If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
this source article.
Hope it helps!
Thanks.
Dharmesh Solanki

Installing Adobe Acrobat 9.0 on a windows 2008 R2 terminal server

We have had Adobe Acrobat 9.0 with our volume license installed on a Windows Server 2008 r2 acting as a terminal server and when clients remote into the server they cannot create pdf's. The box is also a domain controller which is not suggested by microsoft but we inherited it like this. I have tried uninstalling the product and reinstalling it. I ran all updates and still did not work. I also removed everything and then re-installed Adobe Acrobat 9.0 using the "Install Application on Remote Desktop Server" and that did not work (it actually assigned the printer port to a COMM Port instead of the Documents\*.pdf normal port)
Any assistance would be greatly appreciated.

Hi bestteksupport1,
Please check if you meet the system requirements : http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-produ cts.html#id_69342
Acrobat 9 has compatibility issues with 2008 R2 Server.
Support on 2008 R2 has been implemented from Acrobat 10.

Installing additinal cals in existing 2008 R2 terminal server.

<style type="text/css">P { margin-bottom: 0.08in; }</style>
Hi ,
we are using windows server 2008 R2 terminal licensing server which is having 10 user CALs
now we planned to purchase some more CALS for example additional 20 CALS per user
Note : This is the first time we are adding the CALs in existing cals server.
Kindly clarify my query below:
1. what is the procedure to add the CALS with existing CALs.?
2. while installing the new license do we need to deactivate the terminal server ?what will be the impact ?
3. whether we need to define the users per CALs ?
Regards,
Baki.

Hi,
Thank you for posting in Windows Server Forum.
Based on your description, it seems that you already have RDS License server & RDS per User CAL installed on server 2008 R2. And now you want to add other RDS User CAL. For this you can follow the same procedure when you add the CAL. Also suggest you to
contact MS Clearing house and explain him the whole scenario that you want to add the CAL to your existing environment and they will help you to achieve your goal.
Locate the Microsoft Clearinghouse Telephone Number for Your Country or Region
http://technet.microsoft.com/en-us/library/cc754874.aspx
More information.
Install and issue RDS CALs or TS CALs
http://technet.microsoft.com/en-us/library/hh553159(v=ws.10).aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

BSOD Error Windows 2008 R2 Terminal Server

Hi guys
I have a unique issue on a Windows 2008 R2 Enterprise Terminal Server where it keeps blue screening every so often (from every 2 or 3 days to some times once a week) with the exact same BSOD error. After countless hours Googling and researching I am simply
at a dead end and desperately require some guidance if possible. I have ran malware bytes and other tools and the TS does not have any malware or viruses. I have ran a chkdsk and everything is also okay with that.
It has happened about 5 times now with the same errors every time:
29/05/2014 09:42:18
Bug Check String: CRITICAL_OBJECT_TERMINATION
Bug Check Code: 0x000000f4
Parameter 1: 00000000`00000003
2: fffffa80`243c5060
3: fffffa80`243c5340
4: fffff800`01bc70d0
Caused by driver: ntoskrnl.exe
Caused by address: ntoskrnl.exe+75b80
Processor: x64
I have uploaded the DMP to OneDrive: edit: it won't let me post a link until my account is verified?
Thanks
Dan

Hi,
Thank you for posting in Windows Server Forum.
The problem which you are facing seems to be due to ntoskrnl.exe. There might be some corruption in ntoskrnl.exe file.It’s responsible for various system services such as hardware virtualization, process and memory management, thus making it a fundamental part
of the system. It contains the cache manager, the executive, the kernel, the security reference monitor, the memory manager, and the scheduler.
Please check below articles to fix the issue of ntoskrnl.exe.
1. NTOSKRNL.EXE is missing or corrupt
2. How to Fix Ntoskrnl.exe Missing or Corrupt Error
Hope it helps!
Thanks.
Dharmesh Solanki

Java 1.6 u38 stopps working on Windows 2008 R2 Terminal Server

Hello,
I have got a strange behavior on our Terminal Server Farm. We have updated our Servers to Windows 2008 R2. Java 1.6 u38 runs fine, but it stops working suddenly.
Reinstall solves the Problem, but only for several hours. Then some users are not able to use Java from Internet Explorer or direct starting JNLP Applications.
Java starts, but nothing happens. You can see the Java6 Startup Windows with the dots running and thats all.
Admin Users are ables to use Java and some "normal" Users are able, too. After reinstall all user are able to use Java. Next day all servers from our RDS Farm are falling out again.
No eventlog entries or anti-virus entires are present.
Does anybody have an idea whats going on here?
best regards,
Björn

It was a problem with Novell SecureLogin
http://www.novell.com/support/kb/doc.php?id=7007306

Time Zone Redirect Doesn't work on Windows 2008 R2 Terminal Server

Hello All,
A client has two Windows 2003 and two Win 2008 R2 Terminal servers.
When users from a different time zone login to the Win 2003 server, the time zone of the server changes to reflect their own time zone.　 However when they login to the Win 2008 R2 servers, the time zone on the server doesn’t change.
I already enabled the "Allow time zone redirection" on both Win 2008 R2 Terminal Servers in :
Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Device and Resource Redirection
Yet when the clients login to the 2008 server and checks the time on the server, it still shows local/server time and not their own time zone.
Any input will be appreciated.

Hi,
How are things going? I just want to check if the information provided was helpful. If there is any update or concern, please feel free to let us know.
Best Regards,
Aiden
If you have any feedback on our support, please click
here
Aiden Cao
TechNet Community Support

Explorer folder update issues Server 2008 R2 Terminal Server

Hi Folks,
We are having a few issues here. We have a cluster of 5 Server 2008 X64 R2 SP1 Terminal Servers running Citrix Xenapp 6. Our file server is a Server 2008 R2 SP1 server also. All servers are virtualised on ESX vSphere 4.0 and are connected to an EMC
FC SAN.
The users have an application which references a mapped drive (K in this example). This mapped drive is populated with contents from a network scanner. The file extensions change from PDF, JPEG, JPG and GIF. The files are stored on the 2K8 X64 R2 file server.
This all works fine, however the users are getting intermittent 'refresh' problems if you will. Sometimes after the user scans to the folder they will not see the item which was scanned however another user on the _same_ server will be able to see the item
that has just been scanned to file. If I login to the server via remote desktop I can also see the files also. It can take from 2minutes to 30minutes before the users explorer will actually refresh and be able to see the files. During this time if the user
creates a folder in the my documents which is also redirected/hosted on the 2K8 R2 file server they see the changes immediately. If the user logs in and logs out of the Terminal Server the file which was scanned is immediately available to the user.
**NOTE** this problem does not occur every time
Below is a list of the things that I have tried
Changing the Icon size and layout under explorer
Changing the layout from thumbnails to list etc
Disabled SMB 2.0
Completed SMB tuning for Xenapp and Explorer on the limit of concurrent connections etc
Disabled Windows Search
Disabled Indexing
Changed the folder to be both offline and online
Index offline and online folders
Disabled "Client for Microsoft Networks" on the network card
Disabled IPV6 on both Terminal Servers and File server
Ran filemon in compatibility mode on the file server (I can see the file being created)
I have changed the scanning location on the 2K8 R2 file server to no avail
I have checked the file share and it is indeed set to Maximum allow concurrent connections
Checked Perfmon and the disk queue is running about 0.4
I'm now at a loss.. any advise would be great! thanks folks.

Hi,
Does this issue happen on a Windows client? Like the Windows 7 and Windows XP.
Meanwhile, I would give you the following suggestions for your reference:
1.
By default, Windows Explorer generates a lot of SMB traffic - which can result in poor file server performance in some circumstances.
However, some of this traffic is superfluous and can be reduced - for example:
•Searches for Desktop.ini files used for folder customization
•Periodic refreshes of folder contents
•Searches for supporting library (.dll) files
•Individual file details and attributes pulled for each file
•Thumbnail extraction
There are some registry changes you can implement to optimize the SMB traffic being generated.
Import the settings below on client machines.
Terminal Servers running in Application Mode should be considered client machines in this scenario.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer]
"UseDesktopIniCache"=dword:00000001
"NoRemoteRecursiveEvents"=dword:00000001
"NoRemoteChangeNotify"=dword:00000001
"StartRunNoHOMEPATH"=dword:00000001
"NoRecentDocsNetHood"=dword:00000001
"NoDetailsThumbnailOnNetwork"=dword:00000001
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MRXSmb\Parameters]
"InfoCacheLevel"=dword:00000010
[HKEY_CLASSES_ROOT\*\shellex\PropertySheetHandlers\CryptoSignMenu]
"SuppressionPolicy"=dword:00100000
[HKEY_CLASSES_ROOT\*\shellex\PropertySheetHandlers\{3EA48300-8CF6-101B-84FB-666CCB9BCD32}]
"SuppressionPolicy"=dword:00100000
[HKEY_CLASSES_ROOT\*\shellex\PropertySheetHandlers\{883373C3-BF89-11D1-BE35-080036B11A03}]
"SuppressionPolicy"=dword:00100000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\SCAPI]
"Flags"=dword:00100c02
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager]
"SafeDllSearchMode"=dword:00000001
"SafeProcessSearchMode"=dword:00000001
For more information:
Windows Explorer and SMB Traffic
http://blogs.technet.com/b/askperf/archive/2007/09/21/windows-explorer-and-smb-traffic.aspx
2.
Please try to temporarily disable all firewall and anti-virus software to check whether this issue can be fixed.
3.
Please check if the problematic user is still on one switch. If so, I would guess there is an issue on switch.
In this case, you’re using Citrix when this issue happens. I suggest you contact Citrix engineer to particularly ask whether they saw the
similar issue running on Citrix and how to fix it.
Thanks.

DCOM error "1260" on Windows 2008 R2 terminal server when SAP exports data into Office 2007 (Excel or Word)

Hi all,
We are experiencing an issue which happens at random whenever a user tries to export data from SAP into Excel or Word. Excel or Word is started but remain empty. We then see the below errors in the event log. And the problem is very random
as sometimes all they have to do is wait 10 minutes and the next try will be successful. Not even log off/on. Could someone tell me what the error "1260" is saying?     thanks for your help.
Pete
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          7/23/2013 4:07:36 PM
Event ID:      10000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Servername.domain.com
Description:
Unable to start a DCOM Server: {00020906-0000-0000-C000-000000000046}. The error:
"1260"
Happened while starting this command:
"C:\Program Files (x86)\Microsoft Office\Office12\WINWORD.EXE" -Embedding
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          7/23/2013 3:54:34 PM
Event ID:      10000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Servername.domain.com
Description:
Unable to start a DCOM Server: {00024500-0000-0000-C000-000000000046}. The error:
"1260"
Happened while starting this command:
"C:\Program Files (x86)\Microsoft Office\Office12\EXCEL.EXE" /automation -Embedding

Hi,
Based on my research, please try the following:
Click Start, click Run, type regedit in the Open box, and then click OK.
Locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\Notify\termsrv
Under this subkey, add the following registry entries:
Name
Type
Value data
Logoff
REG_SZ
TSEventLogoff
Logon
REG_SZ
TSEventLogon
Restart the Terminal Server computer.
Note: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry
before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, please refer to
How to back up and restore the registry in Windows.
Hope this helps.
Best Regards
Jeremy Wu

2008 SR2 Terminal Server

Similar Messages

Maybe you are looking for