2009 Macbook Pro 13" Yosemite Display Port Freeze
I have a
2009 Macbook Pro 13"
2.26 Core Duo
8gb Ram
Nvidia Geforce 9400M 256mb
Yosemite 10.10.1
Dell 24" Monitor run through apple display port to DVI Adapter
Sony 32" HD TV run through aftermarket display port to HDMI cable
I've been running Yosemite since it was released without any issues. I was calibrating my monitor using spyder3 pro. When the calibration finished I was asked to save the ICC profile when I got an error. The file wasn't able to save properly. I did not write down the error code and at this point i'm not able to recreate it.
I restarted the computer and connected the Dell monitor. The colors that showed were all cartoon yellow and blue with slight outlines of windows but not legible in all areas. More troubling is the fact that the computer itself would start the spinning beach ball as soon as the external monitor was connected. Mouse still moves but nothing is clickable.
I did a hard reset of the computer without the monitor connected. Everything worked fine. I updated the Spyder3 software and calibrated the internal monitor with no issues. I physically deleted the ICC profiles for the Dell monitor. Still the same issue after restart.
I've experimented with the issue a bit more. If I connect the external dell monitor through the DVI Converter I get the same issues stated above. When I disconnect it, the computer hangs for a minute but resets the internal display. I still have the beach ball at this point. If I hover over open programs and right click I can force close them. Once all programs open have been force closed and the finder has been relaunched everything works ok again but the bar at the top of the screen is all grayed out unless I restart the computer. Not the menus just the time, background programs, battery life, sound. search does work.
I've Attached and calibrated my HD TV through the same display port. It seems to hang for a minute but then converts sizes. It did show the the yellow and blue screen for a few seconds once but then corrected itself to display properly.
I've heard similar but not exactly the same symptoms related to Yosemite upgrade.
I'm having trouble eliminating variables here.
Is anyone else experiencing issues like this?
Can anyone shed some light on what is going on here?
Cheers,
Chris
What appears to be happening is the conputer is trying to sync with the display... over and over. Eventually it MAY succeed, more often than not a power off / on of the display and a reboot of the system resolves the issue. There are no drivers from Samsung to support OS-X. Apparently the change from Snow Leopard to Lion caused the problem, and it persists with Mountain Lion.
Similar Messages
-
HT3382 Connect from a MacBook Pro's mini display port to a Display Port monitor?
Hello everyone,
Is it possible to connect from a MacBook Pro's mini display port to a Display Port monitor with resolutions higher than 1920 x 1200? It seems Apple does not supply a mini-DP to DP adapter.
However, just as they do not make a mini-DP to HDMI adapter, but they do recommend a Belkin product for this purpose.
Is there any reason that a mini-DP to DP adapter or cable wouldn't work and support high resolutions?
Thanks for your feedback!danz0r wrote:
Hey tjk,
Thanks for the response.
Do you have any recommendations for a potential set up? The audio output and Apple DVI are on different sides of my MBP, which is alright, I guess I can get two long cables to handle each. I was hoping to just have my MBP closer to where I use it, with a cord nearby plugged in on one side to the HDTV and resting near where I keep my MBP for when I want to use the HDTV as an external monitor.
With a converter like this, you can run video out of the MBP's DVI port, and miniToslink (optical) audio out of the 3.5mm stereo mini jack to the converter, then it will combine the two and output audio and video through HDMI to the monitor.
http://www.supermediastore.com/product/u/apogee-dvi-to-hdmi-converter-spdif-opti cal-toslink-coaxial-input-output?utm_source=cj&utm_medium=aff&utm_content=HDMI+A ccessories
Otherwise, depending on the TV's inputs, for video you could run DVI to DVI on the TV, or DVI to HDMI to the TV. For audio you could run 3.5mm stereo mini plug from the MBP to RCA adapter on the TV. Toslink/optical is also an option. -
How do I connect MacBook Pro without mini-display port to my HDMI TV?
I have a MacBook Pro computer purchased around 2008. I want to connect it to my Panasonic HDMI TV; however, this MacBook Pro doesn't have a mini-display port. Is there a work around? I would like audio & video.
Thanks so much in advance for any help.You will need a [DVI-to-HDMI adapter|http://www.monoprice.com/products/product.asp?cid=104&cp_id=10419&cs_id=1041902&pid=2029&seq=1&format=2], a standard HDMI cable to connect the adapter to your TV set, and an audio cable with a headphone plug on one end to connect to your MBP's headphone port and two RCA plugs on the other to connect your your TV's audio inputs. I know of no way you can get audio into the HDMI cable.
-
Best Way to Connect MacBook Pro (without Mini Display Port) to HDTV?
Hello,
Although I am fairly confident that I know at least one answer to this question, I thought it would be best to pitch it to the members of Apple communities, just to see if there is a better way to get to where I need to go. I have a MacBook Pro that I bought in July of 2007 for college. At this point, I know that it is fairly out of date, but I'm reluctant to throw down another three grand for a new one until I absolutely need to. Anyway, I want to connect it to my HDTV to play movies, games, etc. As this is an old model of the MBP, the Mini Display Port is not available. I do, however, have an Apple DVI port, as well as the (then included) Apple DVI to VGA cable/converter. Now, I know that VGA cannot transfer sound, but I think that DVI can. So here's my problem. If I create a bridge of wires to my HDTV, would sound come through? My idea is this: connect Apple DVI to VGA, then have a VGA to DVI converter, then have a DVI to HDMI cable, which connects to my HDTV. With all of those connections, however, I'm worried that something will go wrong along the way, and it won't work out. What I really need is an Apple DVI to HDMI cable, but I'm pretty sure those do not exist.
Anyway, I was just looking for any feedback that anyone has. Thank you in advance!
Best,
Danieldanz0r wrote:
Hey tjk,
Thanks for the response.
Do you have any recommendations for a potential set up? The audio output and Apple DVI are on different sides of my MBP, which is alright, I guess I can get two long cables to handle each. I was hoping to just have my MBP closer to where I use it, with a cord nearby plugged in on one side to the HDTV and resting near where I keep my MBP for when I want to use the HDTV as an external monitor.
With a converter like this, you can run video out of the MBP's DVI port, and miniToslink (optical) audio out of the 3.5mm stereo mini jack to the converter, then it will combine the two and output audio and video through HDMI to the monitor.
http://www.supermediastore.com/product/u/apogee-dvi-to-hdmi-converter-spdif-opti cal-toslink-coaxial-input-output?utm_source=cj&utm_medium=aff&utm_content=HDMI+A ccessories
Otherwise, depending on the TV's inputs, for video you could run DVI to DVI on the TV, or DVI to HDMI to the TV. For audio you could run 3.5mm stereo mini plug from the MBP to RCA adapter on the TV. Toslink/optical is also an option. -
I am trying to watch a tv show that I purchased into I-tunes. I have the cable and it hooks to the TV okay. The TV shows the regular apple screen that looks like the universe screen - like when it boots up or is doing an upgrade on the OS. I can't get the image to go from the laptop to the TV. I tried under displays and it shows the TV as a display but I can't get the image on the TV.......Please help.
Rwogera wrote:
I couldn't transmit sound either, do i need another cable like Kim said? i mean it cant be transmitted through this HDMI port? as for me i have one of the latest mac pro with intel core i5..tnx
I need to know which MacBook Pro you have. Only mid-2010 and later MBP's transmit sound through MiniDisplay Port to HDMI. I have no information about the Mac Pro, so you might want to go to that Forum and ask there. -
MacBook Pro 17 - Mini Display Port to HDMI - No Sound??
The support page from December 15, 2010 mentions "Mini DisplayPort in the latest Mac models enables audio and video output for the latest multimedia standards: DisplayPort and HDMI."
MacBook Pro 17 from Mid 2010. Can someone be more specific as I purchased a MBP 17 in August, connected the Moshi Mini DP to HDMI Adapter with Audio Support that I purchased from the Apple Store and NO sound??I actually had the same problem as you did, i then selected the sound output to HDMI and it worked. But then the tv always doesnt plays the sound. It percectly works once and then the other time it wont. I checked through the setting, did not work. Lastly i restarted my mac and it worked. so now whenever i have a problem with the sound, i restart my mac. I wish someone comes up with a solution to this problem.
-
I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?
Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.
-
I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.
As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv -
I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.
Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.
-
I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.
I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation. I will post my computer's 'specs' below. I installed Lion, from Snow Leopard, through the App store. The first week, it worked like a dream, and was loving my brand new computer, or so it seemed. I then began to run into problems, and I can't confirm this 100%, but I believe it was after I updated from 10.7.1, to 10.7.2.
The freezes are sporatic at best, and cannot be narrowed down to one app. I googled the issue about two weeks ago, and found a fix involving a temporary log-in, verifying the disk, restarting the computer holding CMD+R, and repairing the disk from there. That fixed the problem. For about three or four days. From there I brought my laptop to Best Buy, where I purchased the computer (start the groans, my dad wanted the accidental damage, and he was paying, there was no argument). My warranty there was still good, but all they were offering was to check my hard-drive, and possibly ship it out. That would not be good for me, as I am a High School student, who works online.
So I then decided to go to the Apple store, see what they said. They said a bunch of people had this problem, it would cost a lot to fix, as I would need a new Logic Board. This did not make any sense to me, as I knew it was Lion's fault, so why would they not make the L-2009MBP Logic Board compatible, and why are only a few people having this problem, well a lot more than a few, but I mean not everyone.
So I asked a friend about it, and we decided to run a back up, and erase the computer, and re-install Lion. Figuring maybe my data was corrupted during install. This helped for a day or two, and happened again. So this time, we backed up only files (music, pics, documents, etc.,) and did a fresh install. I got my computer back last night. Now, I am not saying that didn't help. Previously I would have frozen about 18 times well writing this, but I have not frozen once (hopefully I didn't just jinx myself). I have gone from about one freeze every 10-15 minutes (sometimes worse), to about one every 1-3 hours. Which, let's be honest is still a lot.
So, before I just decide to go and revert to Snow Leopard on my merry way, I ask, do any of you have any other ideas? Or guarenteed fixes? I know a guarentee is a hard thing to ask for, but I am desperate, my teachers are getting angry with me for not sending work, and I know this would help a lot of people. Thank you to those who read through my whole spiel, and thank you to those who will help me!
[Ps, while I am somewhat of a noob, I know my way around a computer, so any help, or knowledge you could bestow upon me is awesome. Especially DIY fixes. (if your only advice is, don't buy a mac at Best Buy, don't bother commenting)]
Macbook Pro
15-inch, 2.53GHz, Mid 2009
Processor: 2.53 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Graphics: NVIDIA GeForce 9400M 256 MB
Software: Mac OS X Lion 10.7.2 (11C74)Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.
-
I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise? During installation emptied cache, etc. Backed up using time machine, fortunately.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I’ve got a mid 2009 MacBook Pro. Today, I updated to Yosemite 10.10.1. I also updated Safari to 8.0.2. Now, anytime I open Safari, it immediately quits and give me an error page that says, Safari unexpectedly quit and suggest that I can click on a Reopen button and restart it, but it just does it again.
I read some of the questions and responses here and went to ~/Library/Safari and threw out the webpages.db file and emptied the trash and rebooted.
No luck; same problem.
BTW: Mail works
Any ideas how to get around this?There is no need to download anything to solve this problem.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked. -
Does the newest macbook pro with retina display have an ethernet connection port?
I am looking at getting a computer for college and am trying to decide between the newest version of the macbook pro and the one with the cd/dvd drive in it and the way i get internet connection in my dorm room is going to be by an ethernet cable so i am trying to cover everything. Thanks for all of the help!
does the newest macbook pro with retina display have an ethernet connection port?
No.
-> http://www.apple.com/macbook-pro/specs-retina/
But you can get a Thunderbolt to Ethernet connector.
-> http://store.apple.com/us/product/MD463ZM/A/thunderbolt-to-gigabit-ethernet-adap ter?aid=www-k2-macbook%C2%A0pro+retina+-… -
Every time I use safari on my macbook pro with retina display, only half the page will load then it freezes up? It's brand new, so I don't understand why it would be doing this?
The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
I have a 2009 MacBook Pro which I have upgraded a few things on. I have updated to Yosemite and am having problems with getting my laptop to come out of sleep mode, and to start when shut off. Any ideas of what this might be or how to correct it? Is this more probably a hardware issue or software?
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Maybe you are looking for
-
Here is what I am/have done and I can not get the template to work: I opened a new page in Dreamweaver 8 and put the page together including all meta tags and saved it as a template (template.dwt) in a templates folder on my local root. From there, I
-
Permissions issues when trying to import CD
When I try to import a CD to iTunes, it gives me the following error message : "Error occurred while converting the file "SONG NAME". You do not have enough access privileges for this operation." - iTunes could not save to your Music Folder and folde
-
Enter recovery mode with broken home button
how 2 enter recovery mode with a broken home button on ipod touch and its disabled with out original computer
-
I've got a flash video( http://www1.kanal5.se/brothersandsisters/brothersandsisters.swf ) that is hardcoded to start playing when the page is loaded. But the page has several different videos and I don't want any to load unless the user chooses to st
-
Reader 8.1.2 says file cannot be found
I have Reader 8.1.2 running on 4 servers. I am having trouble opening a pdf print window on just one server. They all have the same versions etc. I looked through IE add ons and plug ins to find some difference, nothing. I am able to save the file