2012 27" iMac as external monitor for mid-2009 Macbook Pro

I have a 13" Macbook Pro (mid-2009) with an adapter that I have hooked up to the VGA port on PC external monitors in the past. I just bought a 27" iMac (2012) and was wondering if there was any way to make that an external monitor for my Macbook Pro?

Welcome to Apple Support Communities
Purchase a Mini DisplayPort cable and press Command and F2 keys in the iMac

Similar Messages

Whats the maximum resolution resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

whats the maximum resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

I don't know where you found 1920x1080, but that isn't the max. The INTERNAL display can even support more than that.
The maximum resolution is really hardware based, and since Thunderbolt 2 has a Mini displayport connector (Mini Displayport 1.2), the max resolution for Mini Displayport is 4k (3840x2160).
PLEASE NOTE: Not all adapters can support that resolution, most monitors that can run 4k @60Hz have Displayport 1.2 (The most recent revision), Mini Displayport 1.2, and HDMI 2.0. DVI dual link can run 4k, but only 24-30Hz, depending on the monitor.
Hope this helps!!

New External Monitor for Logic on MacBook Pro - Suggestions

I'm in the painful process of updating my studio and now my large screen external monitor has started failing.
I know if this a pretty general question more suited to the MacBook Pro forum but I'd like some input from folks used to working with an application like Logic in a home studio environment.
I guess the issue for me is that I'm not getting any younger and my eyesight isn't what it used to be. One of the things specific to Logic and music software in general is that there are LOTS of very detailed dialog boxes with text that is not always height adjustable (yes I know about zooming and indeed I do lots of that but it gets quite distracting). The other factor is that I'm often recording and engineering myself which means I'll be sitting with a guitar in my lap or at a keyboard and can't always lean in too close to the monitor.
I solved this by buying a large 26" Acer which sits on my desk behind the Mackie MCU. To my left I've got the MacBook 15.4" Pro on a keyboard stand above my MIDI controller at a 45 degree angle to the desk.
It's worked quite well until the Acer seems to have become haunted. It will mysteriously reboot itself intermittently, going blank for a second, then showing the Acer logo and going back to picture. It will also turn itself on spontaneously when the computer is off (the status light is off and then turns itself on). It seems to detect when I'm in the middle of a really good session and starts resetting itself every 30 seconds or so. Then it will work fine sometimes for days or weeks at a time. I've checked it on 4 different computers, it malfunctions on all. I believe in may be a problem with one of the capacitors or the inverter, I'm not sure, but it's driving CRAZY at this point.
And of course now it's 3 months out of warranty and may be more expensive to fix than buying a new one.
So my issue is what monitor to replace it with. I've considered buying an Apple monitor, since the display is lovely to look at but there are a couple things that are deal breakers.
It's expensive. Very expensive.
Oddly you have to choose between a 24" and a 30", with nothing in between. Don't want to sound like Goldilocks here, but the 24 is tooooo small and the 30 is tooooo big.
Yeah I know bigger is usually better but since they bumped the native resolution of the 30" up to 2560x1600 it's really sharp but things like the menu text get really quite small. Yes you can reset to a lower non native resolution, but then you loose the sharpness. I tested Logic in the store on the 30" and it did look great but I found I actually had to move my whole body around to see things at the top and bottom of the screen.
Oh and did I mention that it's expensive? Jeez.
The 24" now seems to look a bit small to me after using the same resolution (1920x1200) on the Acer's 26" screen. (Ok, I think it's actually 25.5 but hey that half an inch can make a big difference and I will avoid making any bad jokes here).
And did I mention the Apple monitors are expensive? The 24" is almost 3 times as expensive as a cheaper alternative.
I also still have a PC here that I use (sorry) and the Apple monitors have very limited connectivity. So I think unfortunately the Apple monitors are out for me.
So I;m down to a couple other non Apple options. I will not buy an Acer again since I believe now that their quality control is not good and their support is absolutely atrocious. Shame I used to be a big fan of Acer PC's, but after owning a couple I'm steering clear.
My biggest issue right now is that most of the new budget monitors are geared toward 1080p HD uses so they are they are maxing out at 1920x1080 (16:9 aspect ratio instead of 1920x1200's 16:10). So the tradeoff here is that HD movies will look better in 16:9, but 16:10 gives you "squarer" pixels and more vertical resolution for screen hungry apps like Logic.
Any opinions on this? I'm a bit new to the Mac so I don't know if I'm really better off going with a 1920x1200 screen like the Apple monitors.
Also, I know this may just be a bug in the Acer's scaling, but if I switch to 1920x1080, I lose the menus off the top of the screen or if I adjust the vpos I lose the dock at the bottom. Downscaling to 1600x1050 or even 1024x768 works fine. If I get a 1080 screen and set the resolution appropriately will it work correctly and without too much distortion?
I'm also curious what is the best way to hook up the monitor? I'm currently using the DVI to VGA adapter that came with the MacBook. My Pro is the slighter older silver keyboard model so it has the standard DVI out. Will I see any real improvement by going over to using DVI directly?
Also I'm wondering how people feel about glossy vs matte for music. My current displays are the non-glossy and I do think I prefer them for detail work.
The candidates right now are
Hanns-G HH-281HPB 28" @300$. It's one of the only budget monitors that uses 1920x1200. All the right inputs (DVI, VGA). I'm just afraid this might be a bit too good to be true. It's really cheap and after having problems with a "cheap" Acer (although it wasn't so cheap 3 years ago!) I don't want similar problems. Stand has no swivel or tilt (a big problem for my use). Also that resolution on such a big screen might be good for me or it might look grainy I don't know I haven't seen it. Anybody have any experience with these?
Samsung P2770H 27" @339 Looks nice, good color. Sadly only 1080 native resolution. Stand doesn't swivel, but does tilt. No VGA input, so won't work with my old PC (although strangely it says it comes with a VGA cable). They get generally good reviews and I know Samsung makes very good flat panel TV's.
ViewSonic X Series VX2739WM 27" @350. Once again maxes out at 1080. It's fast (1ms), has VGA input. I've never been a big fan of ViewSonic but they do seem to have gotten better color-wise. Tilt no swivel and it's anti-glare (not sure this is a plus).
There are also similar options from HP, Asus, LG and Sceptre but they are all 1080. In fact outside of the Apples, the Hanns-G and a few expensive monitors from NEC they all seem to be 1080. So if I really want the 1200 the Hanns-G seems like the only way to go.
Any input here would be greatly appreciated.

No doubt, the Apple displays are gorgeous. The first time I saw the 30" display wow, I wanted one BAD and it's actually what prompted me to buy a "big" monitor. The colors are great with a rich wonderful saturation level and as usual for Apple the form factor design is stunning. You know for that picture quality I could even get over the sticker shock and save up for one.
Which is why I was so disappointed when I actually sat down in the store and started to use Logic on one. I imagine for doing video work, graphic design or darn near anything else, it would be great. But for Logic I just found myself bending and twisting trying to look at toolbar at the bottom and then up to look at the menus. And instrument or plugin displays that were hard coded to look OK at lower resolutions looked really, really tiny to me. For me and particularly using Logic having 2 slightly smaller displays at a 45 degree angle makes more sense.
And once again the 24 seems just a bit small. I don't understand why they have a 27" iMac but you can't buy a 27" display. So iMac 27" starting at 1699, subtract out the cost of the CPU and drive ie the Mini and I'd really buy one. Strangely you can buy a 21.5" or a 27" iMac. Or you can buy a 24" or 30" display. Hmmmm.
So don't get me wrong I'm not bashing Apple for being expensive. They put a lot of money into R&D and into really thinking about the form and the function of their products. As a recent convert from being a PC developer for 25+ years, hey I've more than sipped the Kool-Aid here, I've guzzled it. They make great products and yeah they're more expensive, because they ARE better! I've now got 2 MBP's, 2 iPods, I'm about to get an iPhone (silly "death grip" or not) and I really want an iPad. Heck I'd really love an 8 core MacPro if I could afford one (alas I can't).
I guess my only gripe here is that there always seems to be a little less choice in the Apple world. Yeah, I know they do a lot less volume than the PC clone world I just think that they always seem to have a big gap between the high end and low end with not enough in between. So you can choose between the lower end and one piece units with no expansion boards (the mini or the iMac) or go straight to monster tower MacPro (way over 3K with display). You can get a MacBook but then you have to put up with a small screen or go with MacBook Pro, which let's face it is a lot of computing power for someone who just wants to web surf and write some email without squinting.
So here I am stuck in the middle. I don't want to buy a HannspreeQG or another piece of junk that's going to last 3 years and 3 months because of a crappy $2 capacitor that no seems to able to fix or care about fixing. I'd like to buy a really nice Apple monitor, I just want a big monitor, not a huge one and not a "medium" one (I know I'm spoiled but 24" seems "medium" these days).
Sorry about the rant here but my monitor is shutting down every 30 seconds and I'm about to go completely insane and toss it out the window!!!
Really glad to hear about that 84' VGA cable. I never imagined such a thing existed or would work without some sort of signal boost on the way. Very cool for me. My electronic drum kit is in another room and I would love to have a small cheap monitor next to it for sequencing. I had my laptop on a stand next to it for a while but I began to get terrified that I'd let a drumstick slip and destroy my laptop screen. That would be a very bad thing. Thanks for the tip.

Best OS for mid 2009 MacBook Pro?

Hi everyone,
I have a MacBook Pro from mid 2009 with the following specs:
2.8 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
I had OSX Lion on it with no problems, but recently decided to upgrade to Mountain Lion to be able to use the Messages app on the computer. For the first few days, upgrading had seemed to speed everything up! The Messages app is super buggy, but I was very happy to have upgraded. At this time I also created a new user and copied over about 400 GB of data from my desktop. Everything worked fine after this for a while... but a month later, things have gotten BAD. Applications take forever to open, everything is sluggish. I've tried repairing disk permissions, but it hasn't helped.
I'm wondering if maybe Mountain Lion is too much for the computer? Does anyone have any experiences to report about performance? I think I'm going to do a complete wipe and reinstall of the OS, and am wondering if I should go back to Lion, stick with Mountain Lion, or maybe even upgrade to Mavericks or Yosemite (though I suppose those would be too much for the computer).
Any insights or experience welcome!
Thanks.

My personal opinion is that Snow Leopard is the best OSX for your MBP. It still is the most efficient from Apple.
If you need applications that will only run on newer OSXs, then that is not an option for you.
Have you gone into the recovery partition and opened Disk Utility>First Aid?
Also consider installing the maximum RAM (8 GB) that you MBP will accept, especially of you have thoughts about Yosemite. An SSD would speed things up, but the cost is still rather high.
Ciao

Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina?

Is it possible to use the old iMac 2010 21inch as an external monitor for my 15inch Macbook retina? E.g. Using a mini-display cable to connect from the imac mini display port to thunderbolt port on my macbook.

Apple shows only the 27" version supporting Target Display Mode.
<http://support.apple.com/kb/HT3924>

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

I cannot afford an iMac, can anyone recommend a widescreen Monitor for my 15" MacBook Pro. It would be used mainly for iPhoto and Aperture.

I cannot afford an iMac, can anyone recommend a widescreen Monitor for my 15" MacBook Pro. It will be used mainly for iPhoto and Aperture. TF

Pair a wireless KB with the laptop and all should be well when you attach the laptop to the iMac and invoke TDM. But as Denny mentions, it does seem like the waste of a good iMac to use it in just this configuration. Why is the laptop primary?

Can you use your imac as a monitor for you mac book pro laptop?

Can you use your imac as a monitor for you mac book pro laptop?
I have two computer one being a new mac book pro and the other being a slightly older imac desktop. I am wanting to know if you can use the desktop as a screen for my mac book pro. I just to mirror the laptop onto the desktop because it is more powerful, instead of getting another display for my laptop.
Is this possible and what connections do I need?
Thanks

Hello, we need more info on the iMac, not positive but I think it requires a 2010 or newer iMac & a Mini Display Port cable.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

I have a mid 2009 macbook pro with a bad dvd drive. Can I use an external drive?

Is there an external CD/DVD drive that will work on a mid 2009 macbook pro with a bad SuperDrive?

Hi parrotdawg,
Please look at this post first:
https://discussions.apple.com/message/25385804#25385804
If that doesn't help, I have a Samsung SE-208AB/TSBS External DVD-Writer that works well with my mid-2007 MBP 15". Note this this drive requires 2 USB ports but doesn't use an external power adapter. Also, the above trick worked for me after I got this drive, so now I use it a Region 2 DVD player.
http://www.amazon.com/dp/B005KQ0S8S
Regards,
Ira

Help Connect my Mid-2009 Macbook Pro to my new YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual Computer Monitor

Hi,
I am trying to connect my Mid-2009 Macbook Pro to my new YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual Computer Monitor. I am not having a lot of luck.
My machine:
OS: Mac OS X Lion 10.7.4 (11E53)
Graphics Card: NVIDIA GeForce 9400M 256 MB
Processor: 2.53 GHz Intel Core 2 Duo
I am trying to connect it using the:
Mini DisplayPort to Dual-Link DVI Adapter
DVD-D HDMI cable
YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual
(http://www.ebay.com/itm/150788045871?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m149 7.l2649#ht_16597wt_877)
Here is what is happening.
1. I connect the Mini DisplayPort to Dual-Link DVI Adapter + HDMI Cable to Monitor
2. Main monitor powers up like it is trying to display
3. Laptop Monitor displays second part of desktop
4. I can never get the Yamakasi to display a picture
Here is what I have tried:
1. Different HDMI-D cables
2. ATLONA AT-DP400 Dual Link DVI to Mini Display Port Converter
3. Zapping the P-Ram
4. Powering monitor with laptop closed
5. Forcing the system to see the second monitor
The nearest I can figure:
- The laptop does see the catsleap (it displays resolutions I can set it to)
I am completely stumped, I was hoping someone could advise me.
Thanks,
Don

Hey Kytarx,
I found the winning combination this weekend.
I tried:
- Apple Mini DisplayPort to Dual-Link DVI Adapter
- ATLONA AT-DP400 Dual Link DVI to Mini Display Port Converter
- Monoprice Mini DisplayPort | Thunderbolt® to HDMI®, DVI & DisplayPort Adapter
My experience:
- Altona didn't work at all, and their support claimed it would not.
- Monoprice didn't work to Dual DVI, it did work to HDMI (great price I wish it did)
- Apple Mini Displayport adapter did work, but would only work with certain USB + Display port combos.
The thing that was tripping me up was that two of the Dual DVI-D cords were bad. Once I found the working cord, it was easier to find the working adapter. The experience I did find to be a frustrating / expensive one. However, the Monitor itself is beautiful.
Hopefully this helps someone else..
Don

I need a good monitor for the retina macbook pro

What is a good monitor for the retina macbook pro. Im looking for 27 inch that is around the price of the thunderbolt display. The only thing putting me off the thunderbolt display is that i wouldnt be able to watch stuff on my xbox on it due to no hdmi.
Im going to university so it would be useful to be able to watch tv and play games on the monitor too but Im more interested in a monitor that will work great on the rmbp and on photoshop. I need to be able to calibrate it perfectly.

If I am understanding you correctly you should look at the 27 inch Samsung HD LED. Best Buy has it on sale for $340

My external monitor worked with my MacBook Pro before I took it on a little trip, now it won't work. Any suggestions?

My external monitor worked with my MacBook Pro before I took it on a little trip, now it won't work. Any suggestions?

Never mind. Sorry. It fixed itself.

Windows 8.1 64-bit driver for Coprocessor on Mid 2009 Macbook Pro 5,4

I have successfully installed Windows 8.1 Pro 64-bit onto my Mid 2009 Macbook Pro 5,4. The installer from BootCamp 5.0.533.5033 would not run, but I installed one-by-one the files under Apple and then ran the 64-bit nVidia installlers. I have everything present and accounted for except for the 'Coprocessor.'
I have looked through the forums and everything seems to indicated that if you install the nVidia drivers it will install the driver for this but it doesn't. Any thoughts/suggestions/solutions?

For anyone who will find this post in the future, the Device Manager indicates that the 'Device Instance Path' is
pci co-processor pci\ven_10de&dev_0aa3&subsys_cb7910de&rev_b1\3&21436425&0&1d
Searching for that online, it appears that this is the nVidia MCP79 Co processor System.
This driver did not install with version 306.37 that came with the BootCamp drivers. I downloaded the current version from nVidia of 334.89 and that didn't work either. I searched online and found a driver for an Alienware 17x that uses the same co processor and ran the installer which extracted the files for the nVidia chipset v. 15.57 for 64-bit Windows 7 and Vista to c:\dell\drivers\R273039 and pointed the Device Manager to this folder and it was able to successfully install the driver software for the Management Controller (drivers are listed under the SMU folder for the "PCI\VEN_10DE&DEV_0AA3" device).
NVIDIA nForce System Management Controller
I then proceeded to use Double Driver to backup the drivers in use by the system so that if I install Windows 8 on future systems I can use this rather than the round-about way of getting the driver installed on the system.

I have destroyed the motherboard of a Mid 2009 MacBook Pro. How do I find out the technical specifications so I can give accurate information to someone who buys it for parts?

I recently had an unfortunate incident with a glass of water and a mid 2009-MacBook Pro. 13 inch screen.
According to the techs at the genius bar, the screen, keyboard, chassis and hard drive (160g) were still all good - as were all components other than the Motherboard.
I just completed the complete erasure of the hard drive, but don't have the technical specifications at my disposal.
Does anyone know how I can get them - the guy at apple said he didn't think he could help?
Serial No. Is available.
Thanks-

http://www.everymac.com/

I have a mid 2009 MacBook Pro 5,3 Unibody that won't run anything past Leopard.

I have a mid 2009 MacBook Pro 5,3 Unibody that suffered a minor liquid spill. After waiting for it to dry out, we found that it powers up (but the display doesn't work unless connected to an external monitor) just fine. For several months it worked like a tank running Snow Leopard. I upgraded to Lion with no problems. Once the 10.7.1 update came out, it completely flipped out and wouldn't finish the install. I was forced to take it all the way back to Leopard and now it won't upgrade past Leopard. I replaced the hard drive completely and tried a fresh install of Lion using the thumb drive and that didn't work either. I got the set of errors you will find below. (Sorry, I don't know how to hide them like you can in some forums.) Any ideas or suggestions on why it won't install Lion would be great. I'm not so concerned about the display as wondering why it worked for 4 months and then another month on Lion and then suddenly flipped out on me. I'm not knowledgeable enough to decipher the message below.
Jun 26 10:16:11 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:14: --- last message repeated 5 times ---
Jun 26 10:16:14 christine-cowens-macbook-pro authexec[158]: executing /Volumes/Mac OS X Install DVD/Install Mac OS X.app/Contents/Resources/InstallAssistantTool_10_5
Jun 26 10:16:17 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:18: --- last message repeated 1 time ---
Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xa00a].com.apple.systemuiserver[98]: Unexpected reply from backup server - ignored
Jun 26 10:16:18 christine-cowens-macbook-pro [0x0-0xb00b].com.apple.finder[99]: Unexpected reply from backup server - ignored
Jun 26 10:16:25 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:16:55: --- last message repeated 11 times ---
Jun 26 10:17:53 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:18:23: --- last message repeated 9 times ---
Jun 26 10:21:50 christine-cowens-macbook-pro mDNSResponder[22]: ERROR: getOptRdata - unknown opt 4
Jun 26 10:22:20: --- last message repeated 7 times ---
Jun 26 10:22:21 christine-cowens-macbook-pro com.apple.launchd[72] ([0x0-0x14014].com.apple.installassistant[150]): Stray process with PGID equal to this dead job: PID 158 PPID 1 InstallAssistant
Jun 26 10:22:22 christine-cowens-macbook-pro loginwindow[23]: DEAD_PROCESS: 0 console
Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: reboot by christinecowen:
Jun 26 10:22:22 christine-cowens-macbook-pro shutdown[170]: SHUTDOWN_TIME: 1340731342 279916
Jun 26 10:22:22 christine-cowens-macbook-pro mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[22]: stopping
Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: Shutdown NOW!
Jun 26 10:22:22 christine-cowens-macbook-pro com.apple.loginwindow[23]: System shutdown time has arrived^G^G
Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Jun 26 10:31:05 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Jun 26 10:31:07 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost com.apple.launchd[1] (com.apple.usbmuxd): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jun 26 10:31:07 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jun 26 10:31:07 localhost kernel[0]: npvhash=4095
Jun 26 10:31:07 localhost kextd[10]: 417 cached, 0 uncached personalities to catalog
Jun 26 10:31:07 localhost kernel[0]: hi mem tramps at 0xffe00000
Jun 26 10:31:07 localhost kernel[0]: PAE enabled
Jun 26 10:31:07 localhost kernel[0]: 64 bit mode enabled
Jun 26 10:31:07 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
Jun 26 10:31:07 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 26 10:31:07 localhost kernel[0]: vm_page_bootstrap: 905993 free pages and 77047 wired pages
Jun 26 10:31:07 localhost kernel[0]: mig_table_max_displ = 79
Jun 26 10:31:07 localhost kernel[0]: 104 prelinked modules
Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jun 26 10:31:07 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jun 26 10:31:07 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jun 26 10:31:07 localhost kernel[0]: calling mpo_policy_init for mb
Jun 26 10:31:07 localhost kernel[0]: Seatbelt MACF policy initialized
Jun 26 10:31:07 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jun 26 10:31:07 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jun 26 10:31:07 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jun 26 10:31:07 localhost kernel[0]: MAC Framework successfully initialized
Jun 26 10:31:07 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Jun 26 10:31:07 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Jun 26 10:31:07 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jun 26 10:31:07 localhost kernel[0]: mbinit: done
Jun 26 10:31:07 localhost kernel[0]: Security auditing service present
Jun 26 10:31:07 localhost kernel[0]: BSM auditing present
Jun 26 10:31:07 localhost kernel[0]: rooting via boot-uuid from /chosen: CFA77CDA-F33D-3F25-97CF-9E5EE113C739
Jun 26 10:31:07 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jun 26 10:31:07 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
Jun 26 10:31:07 localhost kernel[0]: 5.10.91.21
Jun 26 10:31:07 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 0025bcfffee5710e; max speed s800.
Jun 26 10:31:07 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9500420AS Media/IOGUIDPartitionScheme/Untitled@3
Jun 26 10:31:07 localhost kernel[0]: BSD root: disk0s3, major 14, minor 3
Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 2878464 to: 2969088 (joffset 0x4b7000)
Jun 26 10:31:07 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Jun 26 10:31:07 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Jun 26 10:31:07 localhost kernel[0]: Jettisoning kernel linker.
Jun 26 10:31:07 localhost kernel[0]: Resetting IOCatalogue.
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 2
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 4
Jun 26 10:31:07: --- last message repeated 4 times ---
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 5
Jun 26 10:31:07 localhost kernel[0]: NVDANV50HAL loaded and registered.
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Previous Shutdown Cause: 3
Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe(MacBookPro5,3)
Jun 26 10:31:07 localhost kernel[0]: AppleTyMCEDriver::probe fails
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: AGC: 2.8.15, HW version=1.8.8, flags:0, features:1
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: GFX0: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 10:31:07 localhost kernel[0]: Matching service count = 0
Jun 26 10:31:09 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jun 26 10:31:11 localhost bootlog[36]: BOOT_TIME: 1340731864 0
Jun 26 10:31:11 localhost rpc.statd[18]: statd.notify - no notifications needed
Jun 26 10:31:11 localhost DirectoryService[32]: Launched version 5.7 (v514.25)
Jun 26 10:31:11 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started -- Threaded auth
Jun 26 10:31:12 localhost fseventsd[27]: bumping event counter to: 0x25d156 (current 0x0) from log file '000000000025c40a'
Jun 26 10:31:13 localhost kernel[0]: NVEthernet: Ethernet address 00:25:bc:e5:71:0e
Jun 26 10:31:13 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:26:08:e3:43:79
Jun 26 10:31:13 localhost blued[45]: Apple Bluetooth daemon started.
Jun 26 10:31:14 localhost mDNSResponder mDNSResponder-176.3 (Nov 3 2008 16:52:57)[22]: starting
Jun 26 10:31:14 localhost com.apple.usbmuxd[15]: usbmuxd-268.5 on Apr 5 2012 at 15:33:48, running 32 bit
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::mediaChanged - Link is down
Jun 26 10:31:15 localhost kernel[0]: NVEthernet::setLinkStatus - Valid but not Active
Jun 26 10:31:15 localhost kernel[0]: AirPort: Link Down on en1
Jun 26 10:31:15 localhost kernel[0]: jnl: disk0s2: replay_journal: from: 9485824 to: 9519104 (joffset 0x9d9000)
Jun 26 10:31:15 localhost /usr/sbin/ocspd[68]: starting
Jun 26 10:31:15 christine-cowens-macbook-pro configd[34]: setting hostname to "christine-cowens-macbook-pro.local"
Jun 26 10:31:16 christine-cowens-macbook-pro kernel[0]: jnl: disk0s2: journal replay done.
Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: 802.11d country code set to 'CN'.
Jun 26 10:31:17 christine-cowens-macbook-pro kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 149 153 157 161 165 153 161 149 157
Jun 26 10:31:19 christine-cowens-macbook-pro org.ntp.ntpd[14]: Error : nodename nor servname provided, or not known
Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: can't find host time.apple.com
Jun 26 10:31:19 christine-cowens-macbook-pro ntpdate[72]: no servers can be used, exiting
Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: Auth result for: c8:3a:35:56:9b:80 MAC AUTH succeeded
Jun 26 10:31:20 christine-cowens-macbook-pro kernel[0]: AirPort: Link Up on en1
Jun 26 10:31:21 christine-cowens-macbook-pro kextd[10]: writing kernel link data to /var/run/mach.sym
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window Started Security Agent
Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismInvoke 0x129e00 retainCount 2
Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismInvoke 0x1015f0 retainCount 1
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: Login Window - Returned from Security Agent
Jun 26 10:31:25 christine-cowens-macbook-pro SecurityAgent[86]: MechanismDestroy 0x1015f0 retainCount 1
Jun 26 10:31:25 christine-cowens-macbook-pro authorizationhost[85]: MechanismDestroy 0x129e00 retainCount 2
Jun 26 10:31:25 christine-cowens-macbook-pro loginwindow[23]: USER_PROCESS: 23 console
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[82]): Exited: Terminated
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Jun 26 10:31:25 christine-cowens-macbook-pro com.apple.launchd[76] (org.x.startx): Unknown key for boolean: EnableTransactions
Jun 26 10:31:26 christine-cowens-macbook-pro /System/Library/CoreServices/coreservicesd[43]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Christine Cowen's Public Folder) returned -14135

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

2012 27" iMac as external monitor for mid-2009 Macbook Pro

Similar Messages

Maybe you are looking for