"21141: Error while posting journal entry :-10 / Internal error"

Hi All,
I'm want to dispose fixed asset by using retirement function in Fixed asset module. Anyone know the solution for this error message "21141: Error while posting journal entry :-10 / Internal error". Please help me.
Thanks in advance.
uddin

Hello Muhd
Please could you go in Administartion > Set Up > Fixed assets > GL
Account Detemination and check the settings of 'Clearing Acc. Asset
Acquisition' account, which is used when creating Journal Entry for
'Acquisition without vendor'.
Could you check if there is a 'Default VAT Code' assigned to this
account. In this case could you to clear the Default VAT Code assigned
to this account and try to do 'Acquisition without vendor' again?
Also,please try to check below option to see if that could help:
1)Check asset Class Land
2)Check GL accounts settings
3)Check the checkbox "Permit Other VAT Group"
Regards,
Syn Qin
SAP Business One Forums Team

Similar Messages

Error while posting journal entry: -5012/unbalanced transaction

Hi everyone,
I got this error message when trying to add a FA Retirement. FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
FA G/L Account Determination is completely defined.
Would appreciate any reply. Thanks in advance!
Jac

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

Add Customer Field while posting Journal Entry

BSEG-KUNNR is not exposed while posting journal entry using FB01. It is not available in the field status group also. How to add customer number field in the field status group to make it available during posting journal entry using FB01.

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

Error while importing Journal Entries by using Data Transfer Workbench (DTW

Dear Experts,
when i am trying to import journal entries (expese entry, met my cash) i got a error message for without entering the tax group.
error message " you cannt post abase amount wihtout taxgroup JDTI BaseSum [line:1] [application defined or object error 65171]
but in example (proving by SAP ) all these are mentioney as date ( tax group)
please give me a solution for this.

Hi Jijo,
Check the link
JE Tax Group
Regards
Jambulingam.P

Error while posting journals

Hi experts,
We are facing an error where the user is able to create and save journal but is not able to post it. While posting the following message comes on the screen:
"The journal is now being posted. Current journal Id:XXXX Initializing... "
Please help us with your expert advice.
Thanks,
Regards,
Kamya Nagpal

Kamya,
We are experiencing the same exact problem here at every month end. The journals sometimes eventually post, but many times do not. That message "The journal is now being posted. Current journal Id:XXXX Initializing... " stays on the screen. If you click ANYWHERE else on the screen, the message "disappears", but when you go back into Manage Journals, the journal is still in a SAVED state and not POSTED as would be expected.
Did you ever get a solution for this?
Thank you.
Regards,
~ Laura Mimken

Error while posting PR to an internal order

Hi,
We are getting the error as "ME 299 Error in commitments check" while creating PR against an Internal order. We have analyzed the issue from the budget perspective for IO and found that there is adequate amount (in K023 ) for the order. The error while creating the PR is coming in WEB system. Any pointers will be of great help in this regard. Thanks in advance.
Regards,
Sumana

Hi Sumana
I could see the error msg above.... I asked you for detailed error analysis.. CLick on the error message and it opens a new window showing the detailed error analysis
Br, Ajay M

Error while posting asset aquisition

Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanuja

Hi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS

Error while posting GR

Hi
We are facing a error while posting GR for a PO, error we are getting is "Account determination for entry 1000 FR3 0002 not possible".
now we have checked that for the mentioned plant(val area) and co code val. grp code is 0002 only, and FR3 is picked by the system because of the condition type used (which is a Z020 and manual one).
please help.
regrds
Yogesh

Hi Yogesh,
Maintain the GL account as mentioned by Ramki that will solve your problem. Or else u must not give an customs duty charges in PO then it will not hit that particular GL and you can post the GR
Hope this helps.
regards
Anand.C

Error while posting inventory

hi all,
I got an error while posting Inventory at plant level.
error:
parameters for plant is not maintain for inventory management.
Field VM07M-ANZGEB. does not exist in the screen SAPMM07M 0410
Field VM07M-GEBEH. does not exist in the screen SAPMM07M 0410
is these config issue?
and how we can do config to resolve this issue.

You have to maintain Plant Parameters from Inventory side as well in consumption based planning side.
check out the path,
SPRO>Materials Management>Consumption Based Planning-->Plant Parameters,
also
SPRO>Materials Management>Inventory Magnt and Phy inv.
-->Plant Parameters.
Copy, from existing Plant.

Error while posting billing documents

Hi,
I am trying to post billing documents for accounting , but I am getting some error related to number range.
I have checked number range assignments, where else I can check to find out error.
Regards
Nidhi

If you are getting error while creating billing document -
Check your number range status assignment in T-Code - VN01
If any userexit is used then check in Userexit MV60AFZZ. There could be a Z-table where the number range may not be properly defined for the Billing Type/ plsnt/etc. as per the settings.
If Billing document is created and you get this error while posting-
Then it would be error with the number range for Accounting Document. Pls. ask the FI person to fix this.
If the above does not solve - pls. mention the exact error with error code.
Thanks

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

ErroR while posting J1IH (TR6)

Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
    to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS                            Dr 2000
SECS                          Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil Kumar

The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar

Error while posting sec.HighEd cess (1%) in J1iin.

we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0,10' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
and.....
System failure during locking GLaccount 1001 by 21150105
Message no. 8I076
reply me. Text Removed
Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
Please dont add such comments

Hey,
I have already replied to your thread for F5702 error.
G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
Regards,
Brinda

Error while posting 561 Document

Dear All
Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
Even OBYC setting for that valuation class already assigned.
please advice.
Regards
Kumar.

Hello Anandhakumar ,
please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
it could solve your query.
regards,
Ninad Kshirsagar

Html error while downloading table entries to Excel.

Hi,
I am getting an error while downloading table entries from webdynpro to excel. After some entries below error script comes and this is not comming all the times.
Is this because of large size?Can anyone please suggest me on this?
Here is the dump:
[code]<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
 <title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 500 Internal Server Error</td>
</tr>
<tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP J2EE Engine/6.40 </td>
</tr>
<tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
 Application error occurs during processing the request.
<table><tr><td valign="top"> Details:</td><td valign="top"><PRE><pre>com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The stream has already been committed.
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:792)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:780)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:768)
 at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.responseCachedWebResource(WebDynproExchangeHandler.java:98)
 at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.doExchange(WebDynproExchangeHandler.java:189)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doExchangeProcessing(DispatcherServlet.java:164)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:119)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
</pre></PRE></td></tr></table>
</body>
</html>[/code]
Thanks,
Sanjeev

Hallo Sanjeev,
How do you exactly "download the table entries from Web Dynpro to Excel?"
I wrote a new Wiki Code Tutorial which demonstrates how to download an Excel file from a Web Dynpro Table UI element on-demand. In this scenario the resource gets re-created on every request. The solution is based on re-initializing the context with a new 0-byte resource object within the calculated context attribute getter method.
See <a href="https://wiki.sdn.sap.com/wiki/display/Snippets/ExportingTableDatainWebDynproJava-SAPNetWeaver04s">Exporting Table Data in Web Dynpro Java - SAP NetWeaver 04s</a>
Regards, Bertram

"21141: Error while posting journal entry :-10 / Internal error"

Similar Messages

Maybe you are looking for