250 Key figures in one cube?
Hello,
we need to report on 250 key figures at the same time. I now there is a limitation in the cube of 233 KF, any ideas to solve this problem? What about using an ODS for the reporting, are there any performance issues or do you have experiences with this amount of KF in one infoprovider?
Many thx
René
I think you should reaccess your data model and see if the no of key figures can be reduced. 233 is the max allowed by SAP. You can partyly solve this problem by creating 2 cubes with the same characteristics and splitting the key figures. This solution will work only when you have mutually exclusive key figures requirement in the report.
Also you can use the Restricted key figures and calculated key figures in the reports thereby reducin the actual key figures in the cube to be within the limit.
Hope this helps.
Amit
Similar Messages
-
Add update rule for new key figure in one info struc
Hi, everyone
I would like to know how to add update rule for new key figure in one info struc.
Thanks ahead.
Eric1)I have created the update rule for one info structure
2)add one key figure in the info structure due to business requirement
3)then I use MC25 to add update rule for the new key figure, but I find that there no relevant menu to do such operation.
Can anybody tell me how to do with it?
Any answer will be appriciated. -
To delete and insert a new key figure in the cube
Hi Experts...
How can I delete a key figure and insert a new key figure into a cube with data...? Should I be creating a new cube with the new key figure ?
Thank you..
Manohar....Hi
Are you using Bi2004s
yes you can delete,add,replace a key figure
have a look at this blog for step by step procedure
/people/mallikarjuna.reddy7/blog/2007/02/06/remodeling-in-nw-bi-2004s
hope this helps -
Adding a new key figure to Info Cube
Can I add a new key figure to an existing Info cube in which data is loaded?
Assume that In Info Cube we have the following.
Stu Id -- Characteristic
Maths , Physics , Chemistry -- Key figures
These are the info objects which are already available and transfer rules are already available for the same in the infosource.
Could any one let me know how to add one more new key figure (total ) , which is the sum of the three marks to the Info Cube and populate the data in to the same.
I have tried the following steps , but could not get the solution.
1). Create a new key figure info object (total).
2). Add the same to the communication and pull the same into transfer rules of the existing info source and activate the same.
3). Add the new key figure to the info cube.
4). Open transfer rules for the info cube and change the mode from NO updation to Addition for the particular key figure (total).
When I perform the 4th step it is giving a red symbol beside the key figure in update rules and I'm not able to activate the same.
Any help on how to add key figures to update rules and transfer rules is highly appreciated and points would be assigned.
Thanks1.add new Keyfigure to Infocube.
2.Go to Update rules> go to update type of that Keyfigure>selct formula in update method>create new formula>here you can add up your 3 keyfigures-->OK.
activate update rules and InfoProvider.Check all are active or not..
by using Export generate datasouce ,you populate data(historical data) to new keyfigure as well.Then you have to delete historical data requests.
or iyou can create formula in query designer as well as srinivas suggested.that would be better option. -
Model multiple key figures of BI cube to BPC
Hi Experts,Probably a good way of having multiple Key figure values from BI to BPC is to convert it into a account based model (create a dimension and have the key figures as dimension members).I have this scenraio where we are using COPA (costing based) for BPC mgmt consol.This costing based COPA cube in BI has around 120 Key figures.Pls advice on the best way to medel this scnerio in BPC where i would probably need most of those Kf's.I am also looking at how i could reduce separate transformation files/mappings from BI to BPC also on the same..
Many thanks
savvvyHi ,
Thank you Pravin and Ajay for your valuable suggestions and time.what i would like to clarify is on the transformations.Let us say i have my BI cube as costing based itself and this i need to map to BPC dimension.
BI structure- char1 ,char 2,char 3 ,KF1(value field 1),KF2(value field 2),KF3(valuefield3),KF4....
In BPC ,lets say we have a separate dimension (i guess this should be of account type or probably user defined one) which would have dimension members as KF1,KF2,KF3,KF4....
Now how would i do the mapping/transformations from BI to BPC? would i need to have 4different transformation files (assuming i have 4 KF's in my BI cube) for each KF & char combination and thus to load data also many times.
How to achieve modelling side of this situation.any suggestions on this would be greatly appreciated.
many thanks
savvvy -
Key Figure value in Cube showing with extra zeros
Loaded data into the cube. When I display the result
Key figure values are showing with 2 extra zeroes and Quantity value shaowing with 3 extra zeroes.
Original value
Price, Quantity, Sales Rev
2 1 2
3 2 6
When display value from cube
Price, Quantity, Sales Rev
2,00 1,000 2,00
3,00 2,000 6,00
Why zero is showing? How can I display the original value? In PSA, values are showing correctly.
Thanks,Hi,
These are the zeroes after the decimal places. this is the property of the key figure.
In your report you can change the display value. In the display properties of the Key figure under the number of decimal places make it as 0. This will remove the zeroes.
Hope it helps.
Regards,
Gaurav
Edited by: Gaurav Kothari on Oct 16, 2008 10:35 AM -
Hi,
In COPA cube, there is Revenue, sales tax key figures. They are transferred from R/3 with the local currency and operating concern currency. In some of my billing document, the document currency is differnt from them. How to transfer the revenue, sales tax etc to BW also with the document currency.
Many Thanks
JeanThanks for you reply.
Actually I solved the problem now. It is actually the Key figure that wasn't added to the Key figure list at the Perameter level. But it was in planning level.
So I added it and it worked well
Sri -
Populating the key figure in the Cube
hi frineds,
I need to populated the custom key fiugre added by me in the cube using the update rule. But if i see the tables of the cube it is seperate for every dimension and key figure. how can i select the particular record from the key figure table with out the reference of the dimensions table.
Thanks
Premso you want to
1. read particular record from cube
2. populate the amount there.
but populating the amount directly to infocube is not advisable and not feasible as well.
my suggestion will be virtual infoprov based on transformation
you will have to write your logic there and you can populate the amount based on billing number (you said you have amount against billing number).
at query runtime based on transformation/logic your amount will be populated.
only drawback reduced query performance -
Several key figures in one colume in P&L report
Hello!
Please, say me about decision of my problem:
I hame hierarchy 0GL_ACCOUNT in P&L report, key figure is 0Balance.
Items of P&L connected with one or more accounts.
But for several accounts I need new key figure (not 0Balance), which calculated with 0Balance from other account.
For example, I need GP = Gross Profit/ NetSales * 100% (May be onother formulas)
Gross Profit1 0Balance
account11 100
account21 70
Net Sales2
account31 50
account41 30
GP1 ....... ?
Gross Profit3 0Balance
account51 100
account61 70
Net Sales4
account71 50
account81 30
GP2 ....... ?You can achieve this if you have two structures in place and not the hierarchy. If you use structues you can go ahead with cell definitions.
-
Why do we see only values of key figures of a cube in SE11?
Hi all,
When we view the contents of a cube in SE11 why cant we view the characteristics also? Why are only the values of key figures visible to us? Is there any way wherein we can also view the whole contents of the cube i.e. both the characteristics and the key figures?
Please explain.
Thank you.
TR.SE11 gives you the Table View.
A Infocube is a complex strructure where data is stored in mutiple Tables...
KEy Figure Values in Central Fact Table...Characteristic SIDs in the DIM Table and these SIDs linked to the Master data table values.
So, to be able to read the values , you would need to know how data is organised in an Infocube
Regards. -
How to choose the characteristics and key figures for a cube
Hi Gurus,
To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?
Hi,
For CO-PA since it is a generated DataSource, except for the common characteristics ( E.g. Company Code, Controlling Area ) where you get standard InfoObjects for all other Characteristics and Key Figures you end up creating custom or Z characteristics and key figures. This is unavoidable.
Assigning points is the only way of saying thanks in SDN
Thanks,
Shan. -
Subject : Problem with Virtual key figures for one scenario.
Hi Gurus,
I have implemented Virtual Keyfigures for my Bex report and it is working perfectly bUt for one scenario.
If i give PLANT and MATERIALS in the selection , The report calaculates the Virtual
keyfigure value correctly But if i give Only PLANT
and NO Materials ( A single plant can have 700 materials also!!), The report executes and after sometime
gives me a messsage " Disconnecting from Server"
I executed the report in RSRT . It gives me this error "exception with the type CX_SY_ARITHMETIC_OVERFLOW occurred"
Since the Virtual keyfigure doesnot use Cache memory. Is it restricted by the Physical memory?. How to overcome this
problem?
Please let know if anyone faced this issue and resolved It. Any help or guidance is really appreciated.Hi Oscar,
Thanks for reply,
How can i know the overflow and how can i use the catch for avoiding the short dump?
thanks in advance. -
How to Selectively Delete ONE Key Figure from Cube....
Hi:
On a Daily basis (Via Process Chain), I need to do the following:
1. DELETE Single Key Figure from my planning cube. When the "PYMNT DATE" is greater than System Date, then delete the
key Figure.
2. Once Deleted, LOAD the same Single Key Figure from another cube when the PYMNT DATE is GT System Date.
How can I do this in a Program. What would be the code for this? Need help with ABAP.
Thanks in advance..... PBSWHi,
See Article on Selective Deltaion in
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Using Selective Deletion in Process Chains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/using%20selective%20deletion%20in%20process%20chains.pdf
Thanks
Reddy -
How to populate values in DP key figure which is not present in Info Cube
Hi
We have a special Key figure in Demand Planning created for uplaoding Forecasts coming directly from customer,
This key figure is not present in Info Cube and data doesnot pupulate in this key figure through Info cube build,
Hence data in this key figure is to be loaded externally , Customer sends his forecasts through EDI messages, Now we want to update forecast from external customer in to this special key figure,
Please suggest some ways
Thanks and regards,
Nitin LavheHi
I think you can get loaded this information in the cube in any other key figure which is available in the info cube. Then while loading the data into planning area using TSCUBE, you can define the key figure assignment.
In which you define data from which key figure of infocube has to be get loaded into which key figure of planning area. Here you can define the respective key figures.
Please let us know if it helps you. Please let us know if you require any more information from our side.
Thanks
Amol -
Building a new Cube Vs Restricted Key figure in Query - Performance issue
Hi,
I have a requirement to create a OPEX restricted key figure in Query. The problem is that the key figure should be restricted to about 30 GL Accounts and almost 300 Cost centers.
I do not know if this might cause performance issue in the query. At the moment, I am thinking of creating a new OPEX cube and load only those 30 GL Accounts, 300 cost centers and Amount. and include OPEX in multiprovider in order to get OPEX
amount in the report.
whats the best solution - creating OPEX restricted key figure or OPEX cube ?
thanks,
BhatI think you should go for cube as all the restrcited key figure are calculated at OLAP runtime so it will definitely affect the query performance.There are a lot of costcenter for which you have to restrict it so definitely during the runtime of query it will take a lot of time to fetch tha data from infoprovider.Its better that you create a cube with the restrictions and include it in MP.It will definitely save a lot of time during query execution
Edited by: shyam agarwal on Feb 29, 2012 10:26 AM
Maybe you are looking for
-
All footage BLACK in Motion 4!
Any footage either sent from FC4 or imported into Motion 4 displays BLACK. Footage is viewable in the internal viewer, Quicktime, in the file browser preview, and on an external monitor. Media preview shows BLACK as well as in the inspector. Footage
-
BAPI_REQUISITION_CREATE with service detail
Hi, Happy new year to all. I'm having a problem working with BAPI_REQUISITION_CREATE. I used that BAPI and was able to successfully create a PR. When I tried to view the PR in ME53N, the service detail was there. However, when I run the BAPI_REQUISIT
-
Does anyone know how to save pdf mail attachments to the iPhone so they can be opened outside of Mail?
-
Can I switch languages for spelling in Pages
I am writing a French document in Pages and everything is underlined in red or green. Can I switch languages to get the corrections in French?
-
Is it possible to keep the alarm sounds on but have all emails/imessages, etc. silent? I am setting my alarm, but every email that comes in wakes me in the middle of the night!