2960 switch SNMP packet errors vs Device Manager Errors

So we use the 2960 switches and monitor the in and out packet errors with snmp. The numbers are not the same in the device manager as the numbers we get from snmp. does anyone know a reason why this would be?

SSL3.0 is disabled in A5(3.1b) and A5(3.2) A5(3.1b) was released in late November 2014 and A5(3.2) was released in April 2015
https://software.cisco.com/download/release.html?mdfid=281222179&flowid=151&softwareid=282775307&release=A5(3.1b)&relind=AVAILABLE&rellifecycle=&reltype=latest

Similar Messages

Why is that the switches tab is missing from device management page of my Aruba Central account?

Q: Why is that the switches tab is missing from device management page of my Aruba Central account?
A: Aruba Central is a cloud-based platform that enables you to manage your Aruba Wi-Fi network. Designed as a software-as-a-service (SAAS) subscription, Central provides a standard web-based interface that allows you to configure and monitor Instant Access Points (IAPs) and Mobility Access Switches.
Switches tab is available only when the end-user's aruba central account have the license to manage the switches. If only IAP license is available, then switches tab do not appear in device management page of Aruba Central.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

No switch health or port utilization info displayed c2960-24tt device manager

Hi there, I have a WS-C2960-24TT-L. running 12.2(58)SE2
When I connect to this switch's Cisco Device Manager web interface, the "bandwidth used" and "Packet error" both show 0%, and no information appears in the port utilization graph.
The temperature and fan indicators appear to work. The page auto-refreshes. Switchports change color as expected (i.e. go dark when disconnected). I have left the browser open for a reasonable period of time (i.e. over the lunch hour). Other items such as the table of port statistics show up as expected. I am using a secure session. I have tried both Firefox 27.0.1 and Internet Explorer 9.0.25 and see the same result in both browsers.
I am thinking I need to configure something in the switch to enable this information to appear.
Thanks for your suggestions!

Well, yes, but it would be nice to have the graphic summary.

Unable to open 2 9509 switches at the same time in Cisco Device Manager

Dear Friends,
There are a pair of MDS 9509 switches whose management addresses are 172.16.2.197 and 172.16.2.198.
When we try to manage these Devices through Cisco device manager, the first device opens up without any problem, but when the second 9509 is opened in Cisco Device Manager, it fails giving the following error message:
"Open udp transport failed: Address already in use: Cannot bind"
To get around this issue, if we close the first interface to the 9509 switch, then we are able to open up the second 9509 in Device Manager.
We have this problem only in Cisco device manager. If we open one switch in Cisco device manager and the other switch in Cisco Fabric Manager, it works.
Also, we can telnet to both the devices successfully at a time.
The device manager in use is 4.1.
Please find enclosed the sh version outputs for your kind reference.
Can you please help me understand the cause of this issue?
Thanks a lot
Gautam

Is it always the same MDS that fails to open, or can you open either one first, and then the second one poses the problem (no matter which one is second)?
Can you try from a second work station and see if you can open DM to both switched at the same time? I suspect the address it is complaining about is the local workstation IP, not the MDS IP.
If you open the FM map, then you click on the MDS ICONs, can you open DM to both MDS?
- Mike

View-only access to Catalyst 2960/2960S device manager

I have noticed that when I access the (Web-based) device manager on a Catalyst 2960 or 2960S switch, the authentication prompt (from within IE, at least) includes the phrase, "The server <switch-hostname> at level_15_or_view_access requires a username and password." This would seem to imply that it's possible to configure view-only (a.k.a. read-only) access to the device manager, which would be perfect for first-level support personnel (in our environment). I reviewed the information on how to configure local authentication for the Web server (leveraging "ip http authentication local" among other commands), but the examples are a bit too broad for me understand how to specifically (and only) allow someone coming in via HTTP(S) to gain read-only access to the device manager. (Command line access should be denied entirely for the view-only user, if possible, or at least limited to commands that can't modify the switch's configuration.) Assuming this is possible, could someone cite the command sequence required?
Thanks,
Mike

Hi,a customer want a user which has view-only rights on his catalyst switches. I created a user whit privilige level 7.If you log into the CLI everything is fine. But by trying to log into the web page the system wants a level 15 user.Is their any possibility to grant the level 7 user "view-only" rights on the Catalyst Device Manager?Thanks.Thanks.
Hi,
Check out the below link for SDM for read only user configuration
http://conft.com/en/US/docs/routers/access/cisco_router_and_security_device_manager/application/notes/SDMcli.pdf
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

IOS Update via Device Manager - 2960 S and X Series Succeed, Others Fail

Hello,
I am doing a round of IOS updates on a small LAN with a mix of 2960, 2960S, and 2960X switches. I have been using the built-in Device Manager, selecting the Software Upgrade option on the toolbar. So far the 'S' and 'X' series switches have upgraded successfully. The 2960 (WS-C2960-24TC-L) series have thus far all failed.
With this failing switch type I select the appropriate .tar, as usual, click the Upgrade button, and wait. In every case the process hangs at step 1. 'Loading the tar file to the switch'. I am trying to upgrade this failing switch type to 15.0.2-SE7. The switches to be upgraded are currently at firmware versions ranging from 12.2.(50)SE1 to 12.2(55)SE7.
Is anyone aware of any known issues with this series of switches that may cause IOS upgrades to hang in this fashion?
Thank You,

Please use [ code] tags https://bbs.archlinux.org/help.php#bbcode
like this
or [ quote ] tags instead of [ ins ] tags - that bright yellow if hard on the eyes.

Equium A200-26D - Error code 19 in device manager on USB ports

I have decided to try Windows 7 but the usb ports don't work in device manager all the usb root hubs have a yellow triangle and the device status says "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)".
I've tried uninstalling them through device manager and restarting the computer and downloading and reinstalling the vista drivers, as I can't seem to find Windows 7 drivers, but none of that fixed anything. I was wondering if there was anything else I could try or if I could get a link to the right drivers.

Firstly I'll state I know first hand that sarcasm and being generally rude via a forum will not get issue's resolved any faster , but I feel raped by Toshiba and 3rd parties and obliged to post
Lets start at the beginning , that's usually the best place .
On 2008 I bought a Toshiba , being a 3D artist I thought this would be a great investment .
But sadly I was wrong .
Purchased at PC WORLD GLASGOW - for 450 GBP "just for geographical reference "
Once I had opened the shinny new box and carefully unwrapped the dangerous contents , I switched on my laptop with bated breath........................
Guess what ?
3 dead pixels not at the side nor the top but right in the middle .
Now you can understand my concerns being a graphics artist , but this issue was quickly resolved "After a Huge fight with PC world because there generative manager policy for today was
" You cant return Unless it had 5 or more dead pixels "
" WRONG ANSWER MY FRIEND "
Ok ,so excellent they swapped it ,after I had to fork out another 50 GBP for an upgraded version because they had none in stock ! .
So effectively I got another machine that I didn't want for extra money .....superb
Ok so, I get this machine home , TOSHIBA EQUIUM A210
everythings fine and dandy for about 1 week
A) DVD DRIVE
-At first I notice the DVD drive acting funny , reading discs then not reading them it lost all function except the ability to read ,ok not a problem I have a home PC that can burn discs ,I'll let that one slip .
B) PAINT FLAKING OFF
the paint on front panel "where the lights are " starts to flake and fall off .
-Ok I'll put that down to wear and tear but its still only a month old
C) OVER HEATING (MEGA) Burnt my daughters arm .
- As I mentioned above I do graphics , this machine main purpose was to browse the internet ,maybe a few world docs , not render out 9 million polyz , I fully understand this concept .
but it started to overheat , I'm not talking about a little bit warm , I'm talking full on ,that much you could cook an egg on . not only did the machine but also the power pack . remembering this machine is still less than 2 months old .
The heat was that intense that it burnt a perfect rectangle onto my 3 year old daughters arm .
-arguing with my wife not to sue for faulty/dangerous electrical goods I phoned customer services up , and spoke to a very nice gentlemen that was happy to help .
Excellent Laptop getting picked up and taken away to get fixed ----SEE CUSTOMER SERVICES NOTES .
I was that considerate that I re-formatted the machine ,dragged all the essential tools onto the desktop ,you know control panel , system setting ect . and even made a nice jpeg schematic where the faults are "because I know how much off a pain in the teeth it can be working on the tech side and anything I can do to help "
1 or 2 weeks later I get my newly refurbished laptop back .
Superb , or so I thought ...................
Jump forward 6 months later , just before the manufactures warranty runs out IRONICALLY
Inbetween random faults and the paint starting to fall of AGAIN ,
The machine starts to switch its self randomly off ! without prior warning .
"Ok , maybe it was just a system fault , I'll restore .
Nope still doing it , Maybe its the battery not holding charge and it's struggling to detect it ?????
Nope its still cutting out ................
May I also add after the return off the machine ,which in my professional opp " YOU JUST REPLACED THE SHELL AND BLEW THE DUST OFF " . --------- PLEASE POST CUSTOMER SERVICES NOTES ...."maybe I'm wrong ?"
Now due to the machine randomly switching it's self off it caused massive corrupt sectors and chkdisk errors and loss of data ."some of which was costly , but functionally I'm an intelligent spices I managed to back MOST data up .
Ok so not a problem It's getting old (1year and 3weeks to be exact ) , its generally used for Internet ,theres some work and some personal photos ,nothing thats going to rock your world .
I'll use it for that .
OVERHEATING AGAIN :
Now this can be caused by dust ,also quoted by one of your ignorant members of staff .--
!!!!but this was caused by another mass produced product ,quickly shipped out and grossly missing product user safety testing .....................
HOW DO I KNOW THIS ::::::::::::::::::::::;
Mainly because when you Google Toshiba A210 it hits over 3 million user faults / problems
"Excuse me for sounding like one of your tech guys , but I used google search string to legitimize the search "
and the evidence is there .
Ok so its overheating ,thats maybe why it keeps cutting out ?
not a problem ,not UNTILL TODAY .
"sorry it took so long to get here "
So today My daughter "now 4 " is playing on nickjnr home page "Carefully avoiding the hot lava that pours from the heat vent at the side , and it cuts out again ....
Goto Switch back on
" A method we now call " PULL THE PLUG OUT AND SWITCH ON AND OFF 5 TIMES ,STAND ON 1 LEG & PRAY .............
and up pops this
some here may have seen this before ...................
THIS IS CAUSED by poor programming and bad development
BIOS :
Its called BIOS lock "and yes i did try , TOSHIBA , ADMIN , 12345678 blah blah blah " effectivily the machines decides to encrypt or maybe not encrypt a password , just depends how it feels that day .
Toshiba know about this fault and offer a fix ##maybe at a price ,just depends on what sales rep you get ##
This is the whole point of the conversation so If I lost you with bad grammer / spelling at any point in the post please PAY ATTENTION this is the IMPORTANT PART
================================================== ==========================
I searched ways to brute force , fix , remove battery and so on when I decided enough was enough this machine is faulty -------I'm going to give legal jargon here just so you know where on the same page .
The Sale of Goods Act 1979 as amended
Goods must be:
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢fit for the purpose they are made for
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢safe
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢durable - last for a reasonable time
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢have no minor defects
???????????????¢?????¢??? ??????¢???¬?????¢???????? ???¢acceptable in look and finish
There's others if you would like me to continue ,even better ones but I'll just use this one right now , just to be polite .
Your PRODUCT was faulty since it left the covaor belt , your people should have picked up on this when it got returned but I'm sure they may have been busy ! .
Now we can argue these points and justifications but ontop all that .................
this hurts the most .
Today I phoned - TOSHIBA CUSTOMER SERVICES :
"Sorry Mr Scott for the problem you can either wait and we'll send someone out to fix it , OR I QUOTE you can take it to PC WORLD and because there TECHGUYS they will be obliged to fix FOR FREE due to it being purchased there .
I PHONE SEVERAL PCWORLD NUMBERS UP and bounced there calls try to get an answer before someone on the end says # " Maybe you should take into your local store 15 miles away " ----
great thinking sherlock
OK
I GOTO PC WORLD : Yet another human with the capacity of a moth , 300 million sp3rm and that's the one that got threw .
TELLS ME " We don't do that because we are are not obliged to fix it " ,"But i have a piece of paper with a customer reference that a trusted toshiba services man gave me
Ok hold my breath walk out and go and phone TOSHIBA up again not a problem ................
This is where it gets good , I phone you after speaking to another 4 or 5 people on your side .
When I get to speak to someone that's happy to help but at a price ,who decides to become law and Order roled into one, the conversation gets silly and YOU throw potential threats and jargon around #congrates your grease monkey can read off a pdf document ,well so can mine ,but fortunate she has practiced Law for the last 10 years and is pretty accurate ...
but again I said Polite so here it is :
YOUR QUOTE TO FIX YOUR PRODUCT ::: 100 + GBP give or take just depends on how constructive your people decide to be that day ...
So here is my QUOTE
PHONE CALLS
TOSHIBA 8 : average length 20 minutes 8 GBP
PC WORLD 4 @ 1.50 min 15 GBP
GAS / FUEL : 15 GBP
Loss of Earnings : 90 GBP @ 5 DAYS 410 GBP
Damages " DO YOU GET MY POINT YET ? "
As I mentioned I'm a reserved man ,but getting shafted by TOSHIBA from all angles does has Limits
Now what I would like to see arriving on my front door is a new brand spanking Laptop with " WE ARE SORRY " note attached .
but for some reason I don't get that impression ?????
I'm hoping we can remedy this issue in a sensible fashion ,
If we can't , I do have a great idea of posting a YOUTUBE video of me destroying your product with several sharp objects , counter productive maybe ,but when it hits a million hits I'm sure I will get another company to give me a laptop out the kindness of there heart ................
Now for forum posters I apologize for raining on your day , to TOSHIBA please try to understand why I'm a little bit upset .
Have a nice day
PEACE .
onlinerender
PM ME .......................................

BB 8130 Error while Updating OS in Device Manager

OK, Hi everyone say hey to the new guy, now help him out! I was just trying to update my BB 8130 with the Alltel 4.5 OS and Device Manager 4.7, But while the program was in the stage of "Reconnecting to JVM," it closed the updater and said Error: Could not reconnect to Blackberry. MY PHONE WON'T DO ANYTHING!!! It's stuck on a screen with a window with some shapes in it and a huge crossed-circle over it. It won't leave this page! When I try reconnecting to the computer, Device Manager doesn't recognize it as a phone. It does nothing. Has anyone else had this issue? I am using XP 32-bit. If anyone can help me out, please do so. Thanks!

Hi and welcome to the forums!
Try this procedure, you will have to join the other forum to get the utility.
Thanks,
Bifocals,
http://blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

My Ipd Nano 6th generation isn't recognized by my computer or iTunes. I've followed all the troubleshooters and have uninstalled and reinstalled iTunes numerous times. I've checked for legacy software under device manager but I keep getting error 10.

My Ipod Nano 6th generation is no longer recognized by iTunes & my computer. I did all troubleshooting steps. After checking for changes and reinstalling legacy software in device manager I keep getting an error 10 message (device can't start). My device is charging when I plug it in and is otherwise still functioning normally. Can anyone help me please?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

Device Manager error

I have a MS-7582 motherboard and I'm getting a device error with this location.
PCI bus 5, device 0, function 0
Device manager says....
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
I have no idea what this is or what driver I should be looking for.
Anyone have any idea?

Added signature.... guess I'll see if it worked with this post.
Badboy. I've been to that download page before I just wasn't sure it was the one listed as lan driver.
Anyway. I downloaded that one and in the process of installing discovered it may still not be the driver I need.
By that I mean the problem one is not listed under my "Network drivers" its the next tab down under the "other drivers" tab.
Its listed as a PCI Device with a location of PCI bus 5, device 0, function 0
And this is the status.
The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.

SD-R6112 drive no longer recognized - Error Code 19 in device manager

Hello!
I have two opticals (one internal, one external) that suddenly are unrecognized. Both are showing up in device manager with the same error message as follows:
Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
After uninstalling and re- installing both several times, including rebooting the devices still will not change status.
The devises are: TOSHIBA DVD-ROM SD-R6112 (internal)
TSST corp CD/DVDW SH-S182M USB Device (external)
Both devices were working just fine the last time I was on my laptop, 2 days ago.
I assume I need to delete some registry entries, but without specifics, I'm not going there!
Can anyone help me?
Thanks so much
Photographer with customers waiting for images...
Susan DeFurianni

In my knowledge a registry problem was detected. This can occur when more than one service is defined for a device, if there is a failure opening the service registry entry, or if the driver name cannot be obtained from the service registry entry.
As far as I know Microsoft provides these solution options:
Click Uninstall, and then click Scan for hardware changes to load a usable driver.
Restart the computer in Safe Mode, and then select Last Known Good Configuration. This rolls back to the most recent successful registry configuration.
Furthermore you could try to remove the Upperfilters and LowersFilters from this registry entry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4 D36E965-E325-11CE-BFC1-08002BE10318}
If it doesnt help then access the device manager reinstalls the primary and secondary channel from the IDE ATA/ATAPI Controller section and reboot.
Good luck and Bye

TS1369 My computer (Win 7) recognises my ipod but when Itunes is automatically started the ipod is removed from "my Computer" and is not recognised in itunes, my device manager states he device is being "uninstalled by window" error 21, what is happpening

My computer (Win 7) recognises my ipod but when Itunes is automatically started the ipod is removed from "my Computer" and is not recognised in itunes, my device manager states he device is being "uninstalled by window" error 21, what is happpening.

Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Java ME SDK 3.0-"Cannot connect to device manager" on port 1299 error HELP!

Hello,
I am running Vista 32 bit. I just downloaded the Java ME sdk 3.0. It installed "successfully". I just tried to launch it several times and it gets stuck in the error below. In summary, something about "Connection refused to host: localhost; DeviceManagerConnection error". Why am I getting that error? This is the first time I installed this.
I run netstat -an, and nothing shows that something is taking up my 1299 port. Also "ping localhost" returns ::1:. And my hosts file looks good. Windows Defender and Firewall are both off. Does anyone have had this issue in the past? If so, please kindly let me know how you resolved it. Thank you.
[ 1052] INFO - mpl.ObjectServerConnectionImpl - Connecting to service:jmx:rmi:///jndi/rmi://localhost:1299/device-manager
[ 2189] WARN - mpl.ObjectServerConnectionImpl - Remote object server is not running at service:jmx:rmi:///jndi/rmi://localhost:1299/device-manager
[ 2297] INFO - l.process.GenericProcessRunner - Starting process: C:\Java_ME_platform_SDK_3.0/bin/device-manager.exe
[ 23372] ERROR - un.jme.toolkit.bootstrap.Batch - Problem calling start() on DeviceManagerConnection
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.jme.toolkit.bootstrap.Batch.invoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.tryInvoke(Unknown Source)
at com.sun.jme.toolkit.bootstrap.Batch.startObjects(Unknown Source)
at org.netbeans.modules.javame.common.container.Module.start(Module.java:21)
at org.netbeans.modules.javame.common.container.ContainerSupport.startModule(ContainerSupport.java:67)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManagerConnection(DevicemanagerHelper.java:41)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.ensureConnected(DevicemanagerHelper.java:48)
at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:84)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:292)
at org.netbeans.modules.javame.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:63)
at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:421)
at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:342)
at org.netbeans.ModuleManager.enable(ModuleManager.java:906)
at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
at org.netbeans.core.startup.Main.getModuleSystem(Main.java:165)
at org.netbeans.core.startup.Main.start(Main.java:312)
at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.io.IOException: Failed to retrieve RMIServer stub: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
java.net.ConnectException: Connection refused: connect]
at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
... 24 more
Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
java.net.ConnectException: Connection refused: connect]

Hi there,
I believe I am having the problem reported by the first person in this thread.
In fact, I installed NetBeans and ran a Java ME sample and it gave me the following error
Jad URL for OTA execution: http://localhost:8082/servlet/org.netbeans.modules.mobility.project.jam.JAMServlet/C%3A/Users/Afamefuna/Documents/NetBeansProjects/CurrencyConverter3/dist//CurrencyConverter3.jad
Starting emulator in execution mode
+{color:#ff0000}*C:\Users\Afamefuna\Documents\NetBeansProjects\CurrencyConverter3\nbproject\build-impl.xml:889:*{color} Execution failed with error code 1.+
BUILD FAILED (total time: 26 seconds)
Of course, I went to the file but the stipulated line didn't make much sense. Eventually, I seperately installed Java(TM) ME Platform SDK 3.0, but when I doubled clicked on its icon to open it, the initial splashscreen showed up, but when the progress bar got to "+{color:#ff0000}starting modules....{color}+", it gave me a java.net.ConnectionException error.
When I went to the generated log file, amongst other things, it also contained the following snippet
+Connecting to service:jmx:rmi:///jndi/*{color:#ff0000}rmi://localhost:1299/device-manager{color}< </strong>[ 23398] ERROR - un.jme.toolkit.bootstrap.Batch - Problem calling start() on DeviceManagerConnection java.lang.reflect.InvocationTargetException+
+ at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+ at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+ at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
From the above I can only imagine there is a problem with the device manager set-up for SDK, but how can it be solved?
The device manager icon shows up in the windows toolbar, however, the "device manager" menu choice is greyed out.
This same problem was replicated in my friend's PC, so I am certain this has to do with low-grade packaging/programming from the vendor end.
Please how do I solve this problem? I am hoping that solving one problem, resolves the other.
thanks
ABCDEFGH1JKLMNOPQRSTUVWXYZ

Fatal Error with Java ME Device Manager and SDK Updates

I recently installed the Java ME 3 EA SDK Platform which looks promising. Everything seem to work fine. In the process of new updates and the desire to remove some older versions of Java, I installed a new Java versions (1.6.0_11) and removed some old ones (1.6_0_04 and 1.6_0_10).
Following this whenever I startup my machine, following the attempted start of the Java ME Device Manager, I get a "Fatal Error: Cannot start child. Error code: 0" dialog.
Following this I get an exception indicating:
java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at java.net.Socket.connect(Socket.java:469)
     at java.net.Socket.<init>(Socket.java:366)
     at java.net.Socket.<init>(Socket.java:180)
     at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
     at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
Caused: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused: connect
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
     at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
     at sun.rmi.server.UnicastRef.newCall(UnicastRef.java:322)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:97)
Caused: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused: connect]
     at com.sun.jndi.rmi.registry.RegistryContext.lookup(RegistryContext.java:101)
     at com.sun.jndi.toolkit.url.GenericURLContext.lookup(GenericURLContext.java:185)
     at javax.naming.InitialContext.lookup(InitialContext.java:392)
     at javax.management.remote.rmi.RMIConnector.findRMIServerJNDI(RMIConnector.java:1871)
     at javax.management.remote.rmi.RMIConnector.findRMIServer(RMIConnector.java:1841)
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:257)
Caused: java.io.IOException: Failed to retrieve RMIServer stub
     at javax.management.remote.rmi.RMIConnector.connect(RMIConnector.java:323)
     at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.connect(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.start(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.lookupMBean(Unknown Source)
     at com.sun.jme.toolkit.remoting.client.rmiimpl.ObjectServerConnectionImpl.findObject(Unknown Source)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.openConnection(DevicemanagerHelper.java:56)
     at org.netbeans.modules.javame.common.container.devicemanager.DevicemanagerHelper.getDeviceManager(DevicemanagerHelper.java:73)
     at org.netbeans.modules.j2me.cdc.platform.jme_sdk.autoinstaller.AutoInstaller.ensureDMStarted(AutoInstaller.java:228)
     at org.netbeans.modules.j2me.cdc.platform.jme_sdk.autoinstaller.AutoInstaller.restored(AutoInstaller.java:65)
     at org.netbeans.core.startup.NbInstaller.loadCode(NbInstaller.java:419)
     at org.netbeans.core.startup.NbInstaller.load(NbInstaller.java:340)
     at org.netbeans.ModuleManager.enable(ModuleManager.java:888)
     at org.netbeans.core.startup.ModuleList.installNew(ModuleList.java:428)
     at org.netbeans.core.startup.ModuleList.trigger(ModuleList.java:364)
     at org.netbeans.core.startup.ModuleSystem.restore(ModuleSystem.java:276)
     at org.netbeans.core.startup.Main.getModuleSystem(Main.java:163)
     at org.netbeans.core.startup.Main.start(Main.java:315)
     at org.netbeans.core.startup.TopThreadGroup.run(TopThreadGroup.java:110)
[catch] at java.lang.Thread.run(Thread.java:619)
When I try to start the SDK itself, I also get "Cannot find java.exe in specified jdkhome. Neither E:\java\jdk1.6.0_10\jre\bin\java.exe or E:\java\jdk11.6.0.0_10\bin\java.exe exists. Do you want to try to use default version?". This also happens with I try starting Netbeans as well.
When I say No, it appears to not start at all. When I say Yes, it appears to try to start but I continually get errors as listed above for the Java ME Device Manager startup error.
After reinstalling the _10 version, things started to work again, so I suspect this is due to my removal of the an older version of the JDK.
How is the proper way to "update" without causing similar errors? Are the environment variable JAVA_HOME, JAVA2_HOME, or some other variable used to specify the JDK/JRE in use? I would rather not be forced to change my startup each time to specify a -jdkhome related parameter.
Should I install the new version, find install the "Java Platform" in the SDK/Netbeans, set it as
Also...
How do you set the default version from within the SDK/Netbeans?
And is there a way to prevent the Device Manager from starting?
Eric

You can try this link to see if it solves your problem.
[http://java.lillegutt.com/?p=3]
Cheers,

Blackberry Device Manager can't find 9320 Bluetooth device (even Bluetooth is switched on and set to Discoverable)

I want to sync my Blackberry 9320 via Bluetooth to a Windows 7 Professional machine using a Bluetooth adapter. Syncing using USB cable works fine.
I can Bluetooth pair with the 9320 and also send / receive files to /from the Windows 7 machine. Fantastic !
HOWEVER, Blackberry Device Manager can not find the 9320 Bluetooth device (even Bluetooth is switched on and set to Discoverable) - see screen shots below.
By the way I have already tried (amongst other things) “Manually Install RIM Virtual Serial Ports in Microsoft® Windows® 7” on http://www.youtube.com/watch?v=gK2n5dHxGHI Unfortunately, this does now work - the drivers do load up OK and remove the warning signs when view in Windows Device Manager, but Blackberry Device Manager still can't see my 9320.
Please help !

I have the exact same problem with my 9360. I have also tried all the fixes I could find on the Internet with no luck. I have posted a request as well. I will let you know if I find a solution. What gets me though is that this appears to be a long standing issue with no obvious fix! Best of luck.

2960 switch SNMP packet errors vs Device Manager Errors

Similar Messages

Maybe you are looking for