2nd gen iPod not visible on Desktop or in iTunes

I have a 40GB 2nd gen iPod that works fine and until recently always appeared on the Desktop and in iTunes whenever connected. Haven't had any problems with the iPod or iTunes. Now it is not visible at all but it does still recharge.
It's connected with FireWire 400 but it doesn't show up in System Profiler or Disk Utility.
I've reset it. I've forced Disk Mode. Nothing works.
Another thing... I have my whole music collection stored on an external LaCie drive and connected to the laptop with FireWire 800. iTunes works fine, though, whenever I connect the iPod to the laptop, iTunes stops playing (the spinning colorwheel appears) and as soon as I disconnect the iPod, I hear the external drive kick in and iTunes resumes playing.
Please help! Thank you.

Thank you for your reply, socrates.
I always connect the iPod into my Powerbook via FireWire 400 and the external LaCie is connected to the laptop via FireWire 800. So, there is no daisy-chain setup.
Actually, I've just realized that my iPod is 3rd generation not 2nd. When I looked at the "Settings" on the iPod it says Version: 2.3 so I thought that meant 2nd generation but just discovered otherwise. Is there any way that I can change the title of the thread?
And any more advice would be much appreciated. Thanks.

Similar Messages

  • 2nd gen ipod not recognized in windows xp or itunes

    I have been working on this for 2 weeks. I have loaded the latest usb drivers/chipsets. Have followed every suggestion on apple website. Obviously lots of people have this problem. When my shuffle is plugged in the computer sees it as new hardware and trys to load a driver which of course there is not one. The hardware "fails to install" and windows can't see it. itunes diagnostics sees all the controllers but no ipod connected. I am about to return the shuffle as I cannot use it. There is nothing wrong with my usb ports my ipod nano works just fine as do all my other devices (camera, printers, mouse, etc.)
    Has anyone solved this?

    there is no drive letter assigned. ALL that the computer does is when the ipod is plugged in it says "new hardware found" and the word ipod appears in the system tray. Then immediately the Found new harware Wizard starts up. it says, "This wizard helps you install software for: ipod. So I am interpreting that the usb port is working and the driver for the port is reading the device. However, since there is no disk or software to install, eventuall a Found new hardware bubble reappears saying you a problem was encountered and the hardware was not properly installed. I don't get any farther than that. The device is NEVER listed in My Computer. As indicated before, there is an entry in device manager showing the ipod under other devices with the yellow exclamation point and the detail showing a Code 1 - no driver.

  • My ipod shuffle(2nd gen) is not visible on  itunes, i have downloaded latest version of itunes on my pc, how do i solve the problem ?

    My ipod shuffle(2nd gen) is not visible on  itunes, i have downloaded latest version of itunes on my pc, how do i solve the problem ?

    Hope the below link may help you to fix your issue:
    http://support.apple.com/kb/TS3716

  • My 2nd gen IPOD touch will no longer sync with itunes.

    My 2nd gen IPOD touch will no longer sync with itunes.  it tells me it cannot read the contents of the ipod then it says the ipod software server cannot be contacted.  Any suggestions?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem
    Then try restoring again.

  • My ipod shuffle 2nd gen will not play music i buy from itunes on my ipod touch 4 why not? its only those songs too

    I need help because i have restored it I have manually put my music on idk wat the problem is and really want it to be fixed. my ipod is a second gen shuffle and when i download music from itunes onto my ipod touch 4 and transfer it to itunes it will not work... HELP!!!!!

    What happens when you try to load those songs (drag and drop in iTunes) from your iTunes music library to your shuffle?

  • My 2nd Gen iPod Touch won't show up in iTunes but does appear in My Computer

    When I connect my 2nd Generation iPod touch to my laptop it will not appear in iTunes. It does, however, appear in my Computer.
    I have worked through all of the troubleshooting guides on the Apple Support section, and have uninstalled and reinstalled iTunes twice.
    This message appears every time I plug my iPod in, and frequently whilst it is still plugged in charging:
    'MobileMe Service has stopped working.' This is a pop-up window produced by Windows, I know this is the 'service' that picks up an iPod's prescence but stopping and restarting the service does nothing. My iPod still won't show up.
    Please help, I am willing to faff around a bit. Might it be a problem with Windows itself? If so, how would I go about fixing it?
    Thanks in advance,
    P.S I have the latest version of iTunes, and the operating system of my iPod is 4.2.1.
    My version of Windows Vista is 32-bit.

    I have the same problem with my 2nd gen itouch.
    I've tried other computer and my childrens iPods work on my computer so not a windows problem.  I've tried reinstalling iTunes and resetting itouch as per apple support pages but nothing, it doesn't even show on my computer. Any help greatly appreciated :-)

  • Restoring 2nd Gen iPod not working

    For some reason, my iPod got stuck when attempting to play. I went to the forum and found out that I needed to restore my iPod. However, I get this message:
    There was a problem downloading the iPod software for the iPod “iPod”. You do not have enough access privileges for this operation.
    I tried deleting "temp" folder. Didn't work.
    I tried working on the "ipod services". Didn't work.
    Does anyone know how to solve this? THANKS in advance.

    Restore to factory settings.new iPod if you have not yet already. If still problem time for an appointment at the Genius Bar of an Apple store.

  • HT1338 why is my iPod 2nd gen. nano not showing up in list of itunes

    Ipod nano will show sync sign for 3 sec then it will disappear and not show up in list for me to sync playlist

    Well, after posting that, I decided to try deleting another app that was on the list and then Dropbox suddenly reappeared.  I've seen others say that Open In is limited to 10 apps (which seems lame to me). 
    The strange thing is on my iPad, I only have 9 apps listed, but my iPhone allows 10. Anyone know why this would be or have a similar issue?  Is there a way to make certain apps default to the Open In... list?

  • My Ipod touch 2nd gen will not sync for some reason to itunes. I've tried almost every possible solution I can find on the internet. The ipod charges fine when connected and Windows also recognizes it as a device but itunes refuses to. What should I do?

    Any help would be greatly appreciated.

    Thank you for the reply. Your answer crossed my mind but I havent downloaded songs in a while so I never paid attention to whether it was syncing or not. However, in my sync history I see that it successfully synced 3 months ago....

  • 2nd Gen iPod not recognized by iTunes

    Up until yesterday, when I plug my iPod in to its USB plug on the PC, iTunes would open and I can see my iPod - all of a sudden, when I plug it into the USB, it starts charging (like it should), but iTunes doesn't open and I if I open it manually, it doesn't see that my iPod is plugged in - anyone know what the deal is???

    I am having the same problem and I can't get any help from IPOD support!!! Please let me know if you find out anything

  • IPod not appearing on desktop or in iTunes Library

    My iPod will not appear on my desktop or in my iTunes library after launching iTunes and connecting the iPod to the computer. It shows up in Profiler, but no where else. My iPod is charged, the "Hold" switch is not on, I have updated iTunes, have restarted computer & iTunes, nothing is working. I borrowed a friends USB Cable connector and after plugging hers into my iPod and my computer, it appeared on my desktop like it should. So I bought a new cord, and now am still having the same problem. Any suggestions? I don't think I need to restore my iPod since using another cable worked.

    Hello all, have an idea for you to try.. because you're right, if the i-pod is still charging, i'm sure it's not the cord that's messed up.. so the only thing i could think of is the USB port maybe.. so try connecting to a different USB port, if that doesn't work.. try this.
    Try changing the drive letter, like this:
    -have the iPod plugged in
    -right click "my computer" on the desktop
    -select manage
    -go to "storage" and "disk management" underneath it (it's a branch of it)
    -Your iPod should show up here
    -right click on the drive that is the USB port with the iPod in it (it might be called just "mass storage device")
    -select "change drive letter and paths"
    -a menu will pop up. Select
    change"
    -Pick a new letter for this drive, one that is NOT YET used for any other drive, like Q or something
    All this does is rename the USB port from "E" or whatever ot was to "Q", so it's not going to harm anything, and worth a try. If it didn't help, and you don't like Q, you can always change it back to E.
    Hope this helps!

  • HT1923 6th Gen IPOD not recognized by Windows 7 or Itunes

    Hello,
    Hi, I have a 6th Generation 8 GB IPOD which is not recognized by either Windows 7 Professional or ITunes. I tried all the steps mentioned in IPOD support. However the problem still persists. Need your assistance.
    Thanks

    What displays on the iPods screen when you have it connected?  I assume you have tried another known working USB cable?
    Is iTunes up do date on your PC (currently at 10.7)?
    Have you tried connecting to another PC or Mac?
    B-rock

  • 2nd gen ipod won't restart or connect to itunes

    My ipod sometimes won't be recognized by any computer if it's been connected to a non-computer usb port like a wall charger. This is normally fixed by reseting the ipod nano (toggle hold then press & hold menu + play/pause) but now the ipod won't reset using this method (I've tried multiple times). Is there a way to fix either of these problems?

    Oh sorry... I must have had that other doc open for another reply.  This is the actual iPod Reset document
    http://support.apple.com/kb/ht1320
    You may want to try doing a Restore (if you have not already), to see if that makes any difference for your issue with having to do a Reset. This is the document for doing a Restore
    http://support.apple.com/kb/ht1339
    (I double-checked the link... )

  • HT201263 Elusive connection error whilst trying to restore 2nd Gen iPod Touch device (iOS 4.2) via iTunes

    Hi.
    It's been a while since I've updated my iPod, and now that I've tried to update it (from iOS 4.2), whenever I click the 'Check for new updates' [for my iPod] button, iTunes states that the latest version is already installed, which obviously is NOT the case.
    I am using the latest version of iTunes, and have already tried re-installing it.
    After attemping to update, the next logical step was to restore, despite losing some of my data this way, for I currently have no-choice but to update via a different system to my usual managing computer of my device(s). However, an unexplained error occured, and my iPod is stuck in recovery mode (displaying that 'connect to iTunes' image it shows at this point).
    Now, I've tried repeatedly to restore th iPod via iTunes, but it just won't work - as it is 'extracting software' (as indicated at the top of iTunes' window), it stops, giving a rather vague error: 'The iPod "iPod" cannot be restored at this time because the iPod software update server could not be contacted or is temporarily unavailable'.
    I have no idea why this occcurs repeatedly, as it is persistent to do so.
    I'd also like to confirm that my system is correctly connected to the internet at a speed that should be ample to install any required updates (furthermore, this error occurs after no-more-than 1 minute after attempting to restore the device)
    Thanks in advance
    ~mini.

    Thanks, but you don't happen to know anything else about this, do you?
    Also, I've now realised it was pointless trying to update my iPod, for I've now found-out that the 2G can't be updated past 4.2.1 (or something) anyway >_>

  • Why is music in playlist on 2nd gen itouch not listed under music heading in itunes?

    I have a few playlist that I created on my iTouch that when connected to iTunes does not list the music in those playlist under the Music heading. How can I include these playlist songs? Without the missing songs I can't get an accurate number of songs on iTouch.

    Correction this is a 32g 3rd gen itouch.

Maybe you are looking for

  • Problem with type conversion and primary key during row fetch

    [Note, this error occurs in Oracle XE, APEX 2.1.0.00.39] I have been having a problem with Automatic Row Fetch: ORA-01460: unimplemented or unreasonable conversion requested So in an effort to resolve this, I created a PL/SQL process with the query b

  • SAP System is not the original system of the object being edited

    Hi All, We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We

  • Installing soa 11.1.1.3 - Help pls

    All, OS: win xp SP3 As per the oracle guidlines I completed the soa 11.1.1.3 installation. Here are the steps I followed 1. Installed Oracle DB 11.0.1.7 2. Ran rcu ofm_rcu_win32_11.1.1.3.3_disk1_1of1.zip 3. installed wlogic 10.3.3 4. installed soa 11

  • Data Type for HTTP

    Hey guys i have a HTTP to File scenario where in my getting and XML file which has sone tags of this form <ServiceDateTime dateTypeIndicator="PromisedForDelivery">2007-04-06</ServiceDateTime> how should i create data type for this? is this an attribu

  • CC apps for Windows Surface RT?

    I am trying to download Photoshop on the desktop of my Windows Surface RT but I keep getting a messagee the I can only download it on a PC, which it is. When I called technical support I was told to download photoshop touch which is only available fo