2nd hdd not showing up in finder (or anywhere else for that matter)

I just picked up a dual 867mhz G4 MDD model and i want to install a 2nd drive in it but i cant seem to get it to show up.
The system drive is installed behind the cpu heat sink, which seemed like a pain to get to, so i put my 2nd hdd in the bay on the left. I made sure the connectors were all secure, and i set the jumpers on my drive from Master (which i used the first time i booted up) to CS, neither of which seem to work. Disk Utility doesnt show the hdd, nor does Finder. Im 90% sure its not the drive's fault.
Do i need to install it on the same IDE cable as the system drive before filling up the other bays?

Do i need to install it on the same IDE cable as the system drive before filling up the other bays?
Nope, but even though Apple recommends CS, that won't work with some drives, if it's on a Blue IDE connector it likely won't work without a drive on the Black end, if it's on the black end it may require Master, or Single.
I'd suspect a bad IDE cable also.

Similar Messages

  • Blank DVD and CD not showing up in Finder or anywhere

    My blank dvd and cd are not showing up in Finder. I checked my preference and deleted from my library com.apple.finder.plist. All to no avail. I have the new upgraded Lion.

    AppleHoop wrote:
    When I open the Disk Utility I see SuperDrive but I can't burn nor eject the disk. The only way I can eject the DVD is to restart my computer.
    Do other blank discs appear normally?
    Do other commercially manufactured discs (software, movies) show up normally?
    Those questions are to help narrow down exactly what the problem is.
    AppleHoop wrote:
    I have no idea what it means to "zap the PRAM" and Reset the SMC"
    Honestly i don't think those are going to make much difference for this problem. Go ahead and do them, but they're usually last resort desparation solutions, not first resort.

  • External HDD not showing up in finder through airport extreme

    I have a 2011 Airport Extreme that I'm attatching an external HDD via USB that's been formatted with a Mac OS Extended (Journaled) partition.
    I can see my drive in the AirPort Utility under Disks > Disks, I've enabled File Sharing, but I can't see it in the finder.
    Any Ideas?
    Thanks!

    The USB port on the AirPort Exreme is under powered. For that reason, you almost always have to use a powered USB hub with an attached hard drive....even if the hard drive has its own power supply.
    Be sure to restart your entire network after you install the powered USB hub so that the disk will be recognized.

  • One user profile is not showing in CA but mysite is present for that account

    Hi,
        One user account is active in AD but not showing in Central Admin in User Profiles after profile import. However, the user has mysite profile also.
    Any help

    Hi,
    Like Alex and Ganesh said, please check the log file to find whether there are some errors related to this issue. The path of the log file is :C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
    In addition, please do a full sync for user profile, compare the result.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Screensaver ONLY working, not main screen, or anything else for that matter

    I just got a new TV a few weeks ago and have bene able to use my Apple TV to listen to music, without even pulling it up on the TV (Just using my iPhone to stream to ATV).
    Here's my problem: The main screen will not show up from the Apple TV.  However, the screen saver will show up when that comes up, so it doesn't appear to be a wired connectivity issue.  Anybody have any idea why I cannot do anything on my Apple TV except the screensaver?

    This problem has nothing to do with the remote.  The Apple TV is still functional with the remote.  The problem remains that I can see the screensaver, but not the main screen on the Apple TV.  As soon as I press a button on the remote while the screen saver is running, the screen goes to black. 

  • Need help with "your purchase can not be completed" when buying an ibook (or anything else for that matter)

    I need help with an error message - "your purchase cannot be completed" when buying something on itunes.

    Lukas --
    Out of curiosity, did you activate the trial software?  Let us know and we will try to help.
    Dale A. Howard [MVP]
    VP of Educational Services
    msProjectExperts
    http://www.msprojectexperts.com
    http://www.projectserverexperts.com
    "We write the books on Project Server"

  • How do I access an external hard drive that shows up in Disk Utility but will not show up in finder or on my desktop?

    I have an external hard drive that just stopped showing up one day. Is there a solution to this problem that allows me to secure the data on the drive before reformatting?

    I'm having the same problem bpay14, but with a CalDigit VR2 6TB RAID0 external hard drive.
    One day it was showing on my desktop, the other it wasn't. And I still didn't update my Mavericks to 10.9.3 (still with the 10.9.2).
    It shows up in the disk utility, and I can even Verify the disk and Repair it (but I don't wanna start repairing
    something that probably doesn't need to be repaired, so I haven't clicked the Repaid button, only the Verify button) and it says its working just fine.
    But it doesn't show in the Finder or the desktop for that matter.
    And even if I force disconnect the cable, I get the usual "this disk was not ejected properly" notification
    presumingly the disk was mounted on the desktop and I forced eject by unppluging it...
    I found a way to force open the disk, through Disk Utility that's by clicking with the right mouse button
    on the disk icon, and chosing OPEN "CalDigit AFRICA 6TB"... (see picture 1)
    But... after that, it open a Finder window showing all my internal and external drives, but that drive's
    name is in washed grey, like if it was unmounted (see picture 2).
    When selected, I can see everything and work normally on the harddrive, even opening FCPROX projects or Libraries, copying from it and writing documents into it... just normal... (see picture 3)
    BUT IT DOES NOT SHOW IN THE DESKTOP...
    that's my problem...
    I even did a Command+i for Info on the hard drive. (see picture 4)
    Can anyone shed some light on this issue?
    I would be eternally grateful!
    Thanks in advance!!!
    Cheers!

  • Some songs from my iTunes library do not show in my Finder music folder

    Some songs from my iTunes library do not show in my Finder music folder. For example one of the three CD's form a triple album do not show in Finder. And therefore they do not get saved when I back up my Mac either. Any ideas?

    Consolidate ("organize") simply looks at everything you have in iTunes and copies them to the iTunes media folder location specified in iTunes prefs -> Advanced.  If you select to use the default settings iTunes will copy any files in its library in the correct location in the media folder.  Since you don't want the files in a different locaiton really but just want to deal with some stragglers don't do the full "move" in hte instructions below but make sure they are organized.
    iTunes 11 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH12165
    The files will be copied so you will need to find the originals abd once you are content the library is working you can get rid of them (I often archive them on an external drive, delete the originals, then play the files which is a sure test if you have a workable copy on the computer).

  • LAP-TOP HP PROBOOK 4330S hdd not show in the bios if I trouble shot show hdd not installed

    LAP-TOP HP PROBOOK 4330S hdd not show in the bios if I trouble shot show hdd not installed

    Hi ASMX,
    Welcome to the HP forum!
    Your HP Probook is a commercial product.  I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Commercial Forum/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
    In the mean time here is a link to your homepage.HP ProBook 6560b Notebook PC Support
    I hope this helps.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Windows Vista Computer not showing up in finder

    Hi, my WIndows Vista computer is not showing up in finder under Shared. I can connect to my PC from my mac by clicking on finder, go, connect to server and typing in the PC's IP Address, Username and Password. I can also see my Mac computer from my PC running Windows Vista.
    What's weird is that it was showing up for awhile but I recently changed my network key and unchecked file sharing on both my Mac and PC.
    Afterwards I re-enabled file sharing on both my mac and Vista computer but my PC won't show up in finder.
    I can connect to my PC and see the computer in finder but when I click eject, it disappears. I would like it to remain in finder. Is there some setting that I need to enable? Please help

    Assuming that the missing machine is part of the same Workgroup/Domain:
    Open Terminal and enter "nmblookup -M workgroupname" (without the quotes, and replacing workgroupname with the name of your workgroup or domain.
    This will list the IP address of the machine that is the "master browser" of your network. If you are on a domain, the address should be that of your domain controller. There should only be one ip address listed.
    You can then get that machine to list the shares that it see on the network by entering:
    "smbclient -L ipaddressofmasterbrowser"
    You should be able to just press enter when it asks for a password.
    This will list available shares and servers.
    Regards,
    Rodney

  • External Hard Drive does not show up in Finder

    My external hard drive is not showing up in Finder.
    It shows up in Disc Utility, but I do not have access to it. I have tried the following:
    command-shift c, nothing happens
    confirmed in Preferences/General that external hard drive was checked
    tried another cable
    tried another port on the back of the external drive
    tried to connect through the USB port
    re-started, etc.

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

  • Windows Shares Not Showing Up In Finder (Master Browser Problem)

    Hi, on leopard I had no problems with Windows shares showing up in finder. However, having upgraded to Snow Leopard, I've now lost that ability.
    Before I had my Leopard computer set as the master browser. I did this by specifying domain master = yes and preferred master = yes in my smb.conf. However despite importing these settings into Snow Leopard's smb.conf, it is not acting as a master browser.
    When I run the command "nmblookup -M -- -" which in Leopard returned my Mac as the master browser, now it says "failed to find name _MSBROWSE_#01".
    I'm sure this is why the Windows PC is not showing up in finder, but I don't know why the smb-conf isn't taking effect in Snow Leopard, and setting it as the master browser?
    Also, I can use Go -> Connect to access my Windows shares, and Mac shares show up in Vista okay.
    Any help appreciated.

    Problem fixed upon updating to 10.6.2.

  • Blank CD/DVDs not showing up in finder

    Hi,
    When I insert a brand new blank cd or dvd, it does not show up in finder or the desktop, which is how i used to make data dvds and such. however it does write in itunes or idvd, it will write to it and recognize it. any ideas?

    Open up preferences and then go to CDs & DVDs. For the options on "When you insert a blank CD/DVD" choose "Open Finder." This should work for you.

  • Windows partition not showing up in finder OR disk utility

    doesn't snow leopard have ntfs support out of the box? Well I have windows 7 x64 installed via bootcamp, yet the windows partition will not show up in finder. I checked in disk utility and there is my macintosh HD, and a greyed out partition named disk0s4. It's 120gb, same size as the windows partion, but it says that it is FAT, which I know is not right. I even went so far as to to reformat the whole drive and reinstall both windows 7 and os x, and I am 100% sure it is a NTFS drive, even though it still will not mount in osx and it still says it's FAT in disk utility. What is going on??

    Go to Finder > Preferences > General
    Make sure External disks is selected.
    Restart your Mac then connect the external drive.

  • Shared devices not showing up in finder

    Shared devices on my network are not showing up in Finder on my MacBook Air. Problem just began in the last 24 hours, and is limited to just this computer. Have done usual things -- checking, unchecking shared devices in Finder; relaunching Finder; restarting computer. Any ideas?

    Your problem is very common under Snow. At first my shares did not show up under shared in finder windows. I, then, of course, used "Connect to Server" to connect to the shares--both Mac and PC. I found that the more I kept the shares active the more likely they were show up under shared. Then, I discovered that if I kept the computers from sleeping during the period of needed access they would tend to stay in shared without nearly so much keeping the connections active.
    If you do not like the above work around, then there are two other possibilities. You can elect to show mounted items on your desktop. Do that and connect to each share. Then, go > users > unlock > + login options > try dragging the mounted shares to the login item window. If successful, then the shares should be available at login.
    Another approach is to mount and connect as indicated above. Then, making an alias to the share should at least make things faster.

Maybe you are looking for