3 identical computers with A55M-E33 BSODs [Dump Added]

Hi Everyone,
I built 3 identical computers recently to use as workstations for a family business and all of them have been having BSODs repeatedly. I have done the following:
- Run memtest86+ for 48 hrs on all of them - No errors
- Swapped ram with some other ram - Still BSODs
- Reinstalled windows - Still BSODs
- Purge and update all drivers - Still BSOds
- Updated the BIOS via Live update 6 utility.
The fact that this is happening to ALL the computers ... I don't know what to say there.
Specs:
Amd A-Series APU A4-4000 3200 in two / AMD A-10 5400k in one of them
FM2-A55M-E33 FM2 A55 MATX MB
Patriot Viper Xtreme 4GB 1333 CL9
Cooler Master 550W PSU
Seagate 500GB Serial ATA HD 7200/16MB/SATA-6G
Windows 7 Pro SP 1.
The BSOD Error codes are all over the place:
- Error code 3b is most frequent
- Almost all errors are memory related: PFN_LIST_CORRUPT.
- Browsers all crash as well for some reason. Chrome goes "aw snap" and IE just straight up stops working.
I will post memory dumps later today but does anyone have any other ideas?
BSOD Computer1:
Code: [Select]
083114-19983-01.dmp 8/31/2014 2:03:32 PM SYSTEM_SERVICE_EXCEPTION 0x0000003b 00000000`c0000005 fffff800`02e3229c fffff880`08166f10 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+75c00 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.18113 (win7sp1_gdr.130318-1533) x64 ntoskrnl.exe+75c00 C:\Windows\Minidump\083114-19983-01.dmp 4 15 7601 276,344 8/31/2014 2:04:33 PM
082914-19749-01.dmp 8/29/2014 12:27:38 PM SYSTEM_SERVICE_EXCEPTION 0x0000003b 00000000`c0000005 fffff800`02e8aad6 fffff880`092770b0 00000000`00000000 ntoskrnl.exe ntoskrnl.exe+6f880 NT Kernel & System Microsoft® Windows® Operating System Microsoft Corporation 6.1.7601.18113 (win7sp1_gdr.130318-1533) x64 ntoskrnl.exe+6f880 C:\Windows\Minidump\082914-19749-01.dmp 2 15 7600 276,232 8/29/2014 12:28:52 PM
082914-13915-01.dmp 8/29/2014 9:30:55 AM BAD_POOL_HEADER 0x00000019 00000000`00000003 fffff8a0`039a6b40 fffff8a0`039a6b40 40fffff8`a0039a6b rdbss.sys rdbss.sys+1c8f8 Redirected Drive Buffering SubSystem Driver Microsoft® Windows® Operating System Microsoft Corporation 6.1.7600.16385 (win7_rtm.090713-1255) x64 ntoskrnl.exe+6f880 C:\Windows\Minidump\082914-13915-01.dmp 2 15 7600 276,232 8/29/2014 9:31:41 AM
[/color]

Quote from: padabsod on 06-September-14, 04:52:42
So I ran prime95 for a whole night and I did not get any crashes. Also, the browser crashes are getting more frequent on one of the computers. Chrome just goes "Aw snap, something went wrong" and IE just plain "stops working".
Changing the voltage to 1.35 seems to have helped one of the three computers, but the other two, changing the voltage does nothing. Still stuck. Anyone got any more suggestions ?
I still have not had a chance to try out a different power supply....
Quote from: padabsod on 06-September-14, 04:52:42
So I ran prime95 for a whole night and I did not get any crashes.
you did this on all computers?
which prime95 test did you used?
what's your bios version?

Similar Messages

External graphics card problem with fm2-a55m-e33

I just bought the fm2-a55m-e33, everything is working fine with the board. I was planning on using my old 9600gso but when I plug it in nothing happens. Windows doesn't recognize the hardware and nothing will display out of the card.
What is the deal?

list full system specs, read >>Posting Guide<<

Problem in MSI FM2 A55M-E33 with sapphire R9 270x

Hi, I'm using A55M-E33 mobo with HD6670, I recently bought R9 270x, Before I bought it I checked diligently if it was compatible with the motherboard mentioned in the title, and it was listed as compatible.The gpu does indeed seat perfectly on the PCI-E slot but ONLY if I have the sata 1 and sata 2 cables disconnected from the motherboard.Is there any way to connect SATA cables ? I'm feeling unlucky Help me

you mean the card doesn't physically fit?
and interfere with sata ports/cables?
if so you can try to install angled sata cables instead, like those:

FM2-A55M-E33 won't boot if LAN cable fitted, black screen with 99 in rh corner

Just bought a new Zoostorm 7872-1212/A computer, which has the MSI FM2-A55M-E33 motherboard.
I installed and registered Windows 7, and download all updates etc without any problems last night.
Started it up this morning, and it didn't post.
All I had was a black screen, with 99 in the bottom right corner.
Switched off, then tried again, still no joy.
Removed all cables, re-fitted just mouse, keyboard and monitor, and it started.
Powered of and refitted LAN cable.
Powered on - black screen and 99.
Powered off, bought new LAN cable, fitted it into another port on my router, powered up, black screen and 99.
Thinking it's a BIOS setting, opened BIOS
Set Sata drive as 1st drive, DVD as 2nd and disabled all other drives
Set wake up events to BIOS, RTC disabled, all other events on
Saved and powered of
Started up, and still back screen and 99
Anybody got thoughts?

list full system specs, read >>Posting Guide<<

FM2-A55M-E33 upgrade bios with richland

Is there any way to upgrade the BIOS on my FM2-A55M-E33 with A4-4000 APU? I don't want to have to buy a Trinity just to upgrade to the latest BIOS with Win 8.1.

There is no reason for rma if nobody guaranteed you that your specific sample will work with Richland out of the box. That the board is able to run Richland cpus of course does not mean it will with any bios version. Vendors have boards in stock. They don't open any box so any board in stock is updated to the latest version. It is common sense a board manufactured before Richland support may not include a Richland supporting bios.
paynej1,
some FM2 boards will not completely work but post with Richland and allow to enter bios. Only those can be updated without a Trinity cpu. For all others you need a supported cpu or having the board flashed by a pc-shop or MSI.

FM2-A55M-E33 don't boot with ATX 4-Pin Power Connector plug in

I have a MSI FM2-A55M-E33 motherboard with AMD A10-5800K.
When I boot, nothing happen, the fan start 0.10 sec, and stop.
When I unplugged the ATX 4-Pin Power Connector, the fan run, but no video...
I try with different power supply and memory, same problem.
And no sound from the speaker...
Can you help me ?
Should I change my MB ?

Here is my conf :
Board: MSI FM2-A55M-E33
PSU : ?
Bios: ?? (no Video output)
VGA: AMD Radeon™ HD 7660D (include on MSI FM2-A55M-E33)
CPU : AMD A10-5800K
MEM : SPECTEK 2133 2x4gb DDR3 1333 CL9
HDD: SANDISK SSD 60GB
When I boot, nothing happen, the fan start 0.10 sec, and stop.
When I unplugged the ATX 4-Pin Power Connector, the fan run, but no video...
I try with different power supply and memory, same problem.
And no sound from the speaker...
Can you help me ?
Should I change my MB ?
Sorry, I have no info about my PSU. I have both 24 and 4 Pin Poweer Connectors...
No OC, just standard config of the Board...

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

MOVED: A55M-E33 Super Charge Not working.

This topic has been moved to MSI AMD boards.
https://forum-en.msi.com/index.php?topic=254654.0

Hi,
Specification say:
Quote
Super Charger
Mobile consumer appliances are getting more and more attention in current day fast moving life style, with smart phones and tablets almost becoming a fashion accessory. However, many ordinary personal computers cannot charge some of these devices, making it difficult to stay connected. The MSI Super Charger is a Windows resident program capable of revising the power supply mode of your USB port to become more powerful. Once your phone or tablet is connected to your USB port, the Super Charger sends a signal to initiate its charging circuit, making it a really smart and convenient charging solution for mobile computing needs.
Note: Only front red USB ports support charger function after system off
Source: http://www.msi.com/product/mb/FM2-A55M-E33.html#hero-overview
I might be blind, but I don't see any red USB header on the motherboard I suggest you ask MSI, as for me it sounds as a mistake on the specification on the website.
Can you check your motherboard box if it says anything about it?
Apparently you should use red USB header, however: plug your case USB 2.0 header to motherboard's header and turn your PC off (just through Windows without switching power supply off) and plug your phone (USB) to case's USB that is connected to motherboard header. If it doesn't work, try the second USB 2.0 header on motherboard. Also make sure you have Utility "Super Charger" installed, available here: http://download.msi.com/uti_exe/SuperCharger_mb.zip

FM2-a55m-e33

Hello. Issues here.
Running this mobo with amd A4 - 5300, 1 stick gskill ram, OZ SSD.
I can load windows fine, but after installation it "hangs" on the "windows is preparing user environment for first time use" the progress indicated shows the PC is not frozen, but it never makes it past this part.
I have been told that step is were windows sets up the drivers, so wondering if it might be a driver issue.
Also this mobo BIOS version is from 5/1/13, there are two never versions. should i try to flash the BIOS? I am not sure how though, the only file MSI hosts is an executable for the BIOS which is only useful if you can actually get into a windows desktop environment. where can i get the actually BIOS file to be used in the M-FLASHER utility within the BIOS?
any help is appreciated, i have sunk 6+ solid hours into this already.

Board: MSI FM2-A55M-E33 FM2 AMD A55 (Hudson D2)
Bios: Version 11.1
VGA: CPU INTEGRATED
PSU: BCP450-OM (Came with case)
CPU: AMD A4-5300 Trinity 3.4GHz (3.6GHz Turbo) Socket FM2 65W Dual-Core Desktop APU (CPU + GPU)
MEM: G.SKILL NS 2GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory
HDD: OCZ Agility 2 OCZSSD2-2AGT40G 2.5" 40GB SATA II MLC Internal Solid State Drive (SSD)
COOLER: STOCK
OC: NONE
OS: Windows 7 64bit Professional
I don't get any errors, or BSOD. It just will not make it past the "windows is preparing user enviroment for first time use"
I can run DOS enviorments, but i cannot get into the device manager from either windows recovery disc OR when it "hangs" at the above mentioned spot. It is frustrating.
I have tried the following.
Installing a video card from another computer because i have heard a video driver issue might cause it to hang.
I have swapped out power supplys with another known working PSU.
I have dissabled all unnessisary BIOS features ex. the LAN adapter, power saver modes...
I have reinstalled windows from a freshly formated drive multiple times.
I have attempted to access the device manager from the command promt in windows repair disc with no success. It seems to only try run the devmgmt off of the X drive (system reserve partition) and not the D: drive (primary partiion with windows 7 instal)

AMD x4 860K and MSI A55M-E33

Hey guys
So I'm building a cheap gaming PC for my daughter for Christmas I ordered a A55M-E33 and a AMD x4 860k after using pcpartpicker (along with 8gb of ram and a 750 TI).
Everything arrived today but when I power it up I'm only getting fans, no beeps no display etc
I'm guessing I've got the wrong BIOS revision but I'm a bit unwilling to buy another processor just so I can reflash the BIOS. Does anyone have experience of this chip working in this board or any suggestions how I can reflash the board.
Thanks
Si

It is also useful to add full system specs as there is more than just vga, cpu and board: >>Posting Guide<<

Bug in latest 2 bios updates for FM2-A55M-E33

Hey guys,
Today I tried to update my bios of my FM2-A55M-E33 to the latest version(7721vA4.zip). Once everything completed succesfully, the bios wouldn't boot anymore.
I plugged out my 3TB hdd and it worked fine. I installed an earlier version of the bios(7721vA0.zip) and this did work with my 3TB hdd.
So in short:
The latest bios updates for FM2-A55M-E33 will freeze(black screen) at bios start when a 2TB+ hdd drive is plugged in.
Namely:
FM2-A55M-E33 (MS-7) V10.3 BIOS Release
FM2-A55M-E33 (MS-7) V10.4 BIOS Release
I hope you can fix this asap, especially since these are the latest updates.
Regards,
Henkie de Grote

Quote from: flobelix on 24-February-13, 08:05:55
better report to MSI: >>How to contact MSI.<<
True, but I couldn't find an email address, couldnt see how to contact them through a form or something, and don't really want to call them if otherwise possible.
Thx for the info anyways

Migrated and now 2 computers with same computer name?(user account)

I used the Migration Assistant to move info from iBook to my MacBook.
I don't know how but now on my MacBook I have a copy of my user account from my iBook.
Now, I have two user accounts on my MacBook, the original user account created when I started using the computer and now, my old iBook user account.
Is this normal?
Later, I would like to create a network using the two computers on my Airport Extreme n Base station.
Will it be a problem to have two computers with identical user accounts?

There is not a problem with having identical usernames on two different computers. You also suggested the "Computer name" was the same. Is this the computer name at the top of the "Sharing" preference panel? If so, those need to be different.

FM2-A55M-E33 : stop working suddenly : 2 bips

Hi,
my motherboard FM2-A55M-E33 suddenly stopped to work : after switching on, the display remains black, keyboard (logitech G15) doesn't seems powered on, nothing boot but the buzzer produces 2 quick bip each ~10s. This config was working well for 2 months but i had to reboot this morning, but no way to boot again !
I cannot find explanations on these bips meaning and don't know what to do now, i try to removed as many component as possible (keyboard, harddisks) without success; could someone help me with this ? Any suggestion will be appreciated.
Do you have a way to do a hard reset of the BIOS ?
Board: FM2-A55M-E33
Bios: 10.1 (according to User's Manual)
VGA: APU A4-5300
PSU: 350W
CPU : APU A4-3400
MEM: 1x4Go GSkill DDR3

Quote
Do you have a way to do a hard reset of the BIOS ?
hard reset? Try that: >>Clear CMOS<<
Quote
Bios: 10.1 (according to User's Manual)
The bios version of your board is not listed in User's manual...
Quote
PSU: 350W
What 350W psu? >>Posting Guide<<
Quote
MEM: 1x4Go GSkill DDR3
What GSkill stick? >>Posting Guide<<
Try reseating cpu and retry with testing the memory stick in any mem slot one after the other.

PLEASE HELP. Two computers with the same External IP Address

I have two computers with the same IP address which is causing problems. I tried to ipconfig/release ipconfig/renew but I get the error "No operation can be performed on a Local Area Connection* 11 while it has its media disconnected.
I tried resetting router/modem, made sure "Obtain an IP address automatically" are all enabled. DHCP is enabled.
Two of the computers have the same one and the other IP is completely different (not 1 or 2 off). When I open the router settings and click DHCP Reservation it shows the IPs 1 number off and all different like you said. i.e ***.***.*.106, ***.***.*.107,
***.***.*.108. But with the proxy service I'm using, when trying to allow each computer to use them it shows different IP addresses than what is shown in the DHCP Reservation.
If I clone my MAC address the identical IP of the two computers changes but they'll still share the same IP. The third doesn't change.
I tried ipconfig /release - ipconfig /renew - ipconfig /flushdns nothing yet. Not sure about your #2 and #3. And I just updated my firmware.
Anyone with expertise? Thanks.

Cyber_Defend_Team and ZigZag3143x I powered down all three computers and turned off/reset the modem and router.
I restarted them one by one and after, the two computers with the conflicting IP address changed their IPs but their IPs are still conflicting. The third computers IP stayed the same.
What else can we do?

FM2-A55M-E33 and Dual Graphics

I purchased a MSI FM2-A55m-E33 Mainboard, AMD APU (A8-5600K), 8 GB Kingston HyperX Memory and a MSI Radeon 6670 viseo vard to do a CrossfireX budget gaming rig.
I have 2 Problems, the memory can not be set over 1333 MHz, if I set it to 1600 in the bios after about 10 minutes of playing wow, the game closes, if I set it back to default (1333) it runs fine.
2nd problem, when I first set up the PC, and started to set up the bios after 20 seconds the PC would restart. I had the video card plugged into the 6670 card, not onboard, this happened 2 or 3 times so I decided to plug it into the vga on the mainboard, no more resets...so I thought...hmmmmm.
Anyway, set up the bios, logged into Windows, downloaded the drivers, set it all up for dual graphics, restarted the pc. Plugged the monitor in the 6670 (as recommended by amd) and no video, pc boots and goes into windows, but I have no video, so I plugged the monitor into the onboard video and viola, it works.
So, next I turn off dual graphics in the Catylist software, reboot pc to just use the 6670 until I get this figured out, plug the monitor into the video card, guess what...no video again. I can only get video from the mainboard, never from the 6670 video card.
I have been tinkering with this all weekend to no avail, its driving me nuts.
My setup:
MSI FM2-A55M-E33 Mainboard
AMD APU A8-5600K (Unlocked)
8 GB Kingston HyperX 1600 Mhz DDR3
MSI R6670 Video Card
Thermaltake TR2 600 watt PSU, 2X 12V Rails
Seagate Barracuda 640 GB HD
Lite-On DVD R/W
P.S, I laready updated the bios to ver 10.1, it didnt fix anything.
Any help would be greatly appreciated.

Quote from: oozz77 on 28-November-12, 21:28:39
I think you got the wrong card for "duel graphics".
I'm sure it can't be higher than a 6570 model with a A8-5600 and that's why it isn't working as it should!!
You can now only use the 6670 once you set i in the bios or simply try to exchange it for a 6570.
Yup, what you have integrated graphics: AMD Radeon HD 7560D, recommended what you need for dual graphics: AMD Radeon HD 6570
http://www.amd.com/us/products/technologies/dual-graphics/Pages/dual-graphics.aspx#3
Although that RAM is primarily meant for Intel Sandy Bridge system with 1600 XMP profile it's possible it may be OK for your system but you would have been better off getting RAM for AMD system instead. When trying for 1600 did you bump up voltage from 1.5V to a bit more like maybe 1.55 to see if it would run stable?
Research for proper component compatibility goes a long way to eliminate problems such as what you are having.

3 identical computers with A55M-E33 BSODs [Dump Added]

Similar Messages

Maybe you are looking for