3 Master Sockets in the same room

So I have 3 Master sockets in one room (yes don't know why there are so many in the first place, previous owner probably) so I have 3 master sockets the 3rd still has the bt piper logo and the first one has the t logo so I might plan to move the home hub to the third one can I do that? the hub is currently connected to the 2nd one which has the openreach logo and stuff..

Do all 3 sockets still work?
Its possible that only one is the Master, more than likely the Openreach branded one and the others are just asting as extensions. You can do that by just connecting the Battery, Earth and Bell Wire to the terminals on the faceplate of the other two NTE's and not the A and B terminals on the back plate.
I used to do it for a living and sometimes when I changed sockets around for whatever reason and didn't have a flush mounted LJU on me I would just do what I described above. Might confuse an engineer for the whole of two minutes but they would soon work out which is the master and which is the extension.

Similar Messages

Current master socket in an adjacent room to study...

I'm moving house next week, with BT Infinity on order.
My master socket is in the adjacent room to where I'd like it to be. I understand the installation comes with a 30m extension kit if needed, but will the engineer be happy drilling between rooms, or do I need to do this before arrival, and if so, do I need to pre-lay cat 5/6?

PROBLEM SOLVED!
EDIT: Comments and pictures removed as requested by BT mods. How come I can discuss this but not allow to post pictures or discuss this any fruther???
After some investigation and more twiddling with trail and error. I found out that the cause of the connection was down to a loose master socket
From the image above, you can see I've moved the whole front facial to get access to the socket at the wall. The lighter shaded part was quite loose and I suspected when I put the NTE2000 in, it push the master socket back and did not make a full connection. To over come this I wedge some hard plasic behind it and put the whole unit back together. Of course I tested this in between with my modem but as you can see below the 3rd light to the right - we have the internet!
Now the next problem, did a speed test and i'm hitting 3.5mb instead of the 7mb I was hoping with this adapter. I connected the brown (orange - socket 2) wire in to see if that made a differance but is that what's effect my speed.

Remote and direct update of master data at the same time

Hello
Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
Thanks

Hi,
What do you mean by Remote Update ?
regards
Happy Tony

ITunes Match doesn't work at times- in the same room (on Wifi) I will add a song to my playlist on the iMac- instantly it appears on my iPad but not on my iPhone 6plus

ITunes Match is extremely unpredictable- in the same room of my house on the same WiFi- all my devices are up to date (software wise). I will add a song on my iMac 27". To a playlist I created- Instantly the song shows in the playlist on my IPad Air2. But it does NOT show in my playlist on my iPhone 6plus- I reboot everything- even do a hard-wired sync- it just won't appear- sometimes- frustrated with the time I am wasting I just email (from my iMac) the song to myself so that I can play it on my iPhone 6Plus- I create a lot of music on my iMac using Logic Pro- and there are times I want to have the process (songs in the marking) available on my iPhone so I can play them while driving, etc., extremely frustrating as this issue is very new - had no problems for months and months but now I do- I rebooted everything (phone, etc.,) created a new play list-and then it appeared on the iPhone in the new playlist- BUT if I want to add a song to the new playlist- same situation- never appears on the iPhone but does appear on my iPad IMac and MacBook Pro- ITunes Match is turned on- I am on the same WiFi FAST network at my house- Any ideas ?

Hi Rob- I'm guessing it has something to do with all the update stuff Apple keeps doing (with Yosemite, etc.,) extremely frustrating - also whenever I load up iTunes on any of my devices- I am asked to enter my passcode- which I will do- then I am asked to do it 2 or 3 more times - right after the other- crazy how annoying something like that can be- I have looked online for solutions- i.e. close out of the account, reset the passcode- all of it- nothing seems to fix that situation either- what I have discovered (playing around) is on my iPhone 6+ if I go to settings and turn OFF iTunes match- then turn it back ON- suddenly all the music that wasn't loaded shows up magically- but I had to do that each time I'd update songs in my playlist on the iMac- then go to the iPhone and turn off the match- then turn it back on- almost like it is resetting things-

IPhone 4S doesen't connect to wi-fi unless it's in the same room. Please Help!!!

I have an iPhone 4S and i have recently upgraded to iOS 6.1.2 and I am experiencing problems with connecting to my home wi-fi. The iphone detects the wi-fi network (2 bars) from my room but when i click on it it says "unable to connect". The iphone only connects when i am in the same room as the wi-fi router. I thought it may be a signal strength issue, but my iPad and iPhone 4 both connect smoothly from my room and all other rooms and have no issues at all (Both running iOS 6.1.2).

I am having the same issues plus some. I have the S4 and after researching it here on Apple Support am convinced it was due to these last updates. So many comments with the same issues! I stopped by Sprint and asked how I could revert back or uninstall the updates. They informed me that wasn't possible and unless I was willing to shell out the cash to upgrade I was stuck with it. If this doesn't get resolved I will no longer be an Apple user of any sort. It's just not right!

Can I have 2 HD DVRs in the same room, and control them separately?

New FIOS TV being installed in two weeks, making the switch from Dish Network.
If I have two DVRs in the ame room, and two remotes, can the remotes be set up to work with each DVR separately, or will one remote cause both DVRs to respond? WIth my Dish Network DVRs, I can set a remote code for each - can I do the same with the two DVRs I'll be receiving?
Thanks!
Message Edited by frabman on 12-05-2008 11:51 AM

DallasTX wrote:
Replace one of your Verizon DVRs with a TiVo. I've had a Verizon 6416 and a TiVoHD with an upgraded 500GB hard disk for about two years now. I prefer the TiVo especially the program guide information.
The TiVo doesn't do Video-on-Demand, but you would still have the Verizon DVR for that.
Since you can control multiple TiVos from a single remote in the same room, you could add a second TiVo if you needed three DVRs.
Message Edited by DallasTX on 12-06-2008 06:39 AM
As it seems that all the shows I want to watch are on at the same time, having two DVRs (4 tuners) would resolve the "what to record" problem I keep running into. The fact that you can control two TiVo DVRs with one remote is a great plus. However, how did you hook both of your DVRs to one set?

WiFi (WLAN) problem - in the same room a iOS 5 device connects, iOS 6 not

Hi all,
I won't say that it's a proof for the iOS 6 WiFi/WLAN problem. BUT, it's evident that my iPhone 4 with iOS 5 sees all WLAN-networks and connects - my new iPad with iOS 6 doesn't! And I'm using the two devices in the same room. In addition my new iPad didn't have connection problems before updating to iOS 6.
Apple Software Engineers - please help and release the next update to fix it
Best regards
O.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My macbook is connecting to a wifi network, but my ipad in the same room does not recognize it.

my macbook is connecting to a wifi network, but my ipad in the same room does not recognize it. I have reset the ipad settings, etc. Any ideas?

Try a restart of your entire system. Shut down both your modem and your router if they are two separate devices. Then restart each item one at a time with about three minutes between each device.
Also reset the iPad by pressing and holding the Start and Home keys together, ignoring there'd slider until the Apple logo appears.

My iphone5 is in the same room with an ipad, 2 kindles and 2 iphone4S and it's the only one that does not have a wifi signal. pls help

why does my iphone5 not have the same wifi coverage as 2 other iphone4s in the same room?

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple Logo. If you are still not able to connect try resetting your network settings. Go into your settings>general>reset then tap reset network settings. If both fail to fix your problem try restarting your router.

Master Detail on the same page PHP - MySQL

Hi,
Is it possible to create a page using spry master region and call MySQL data into a Spry detail region, like you do with xml data?
Basically, is there a way to have master detail regions on the same page without using frames?
Thanks
Bert

Thanks for that, very useful indeed.
But isn't it going to be slow, first transferring the MySQL data to XML then reading XML to display the records.
What is the advantage other then displaying master detail on the same page?
Thanks
Bert

I have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and i

hi can anyone help please ? i have had apple products now for apron 7 years BUT have never been able to make the bluetooth work , not even when 2 products i.e. : phone and iPod are in the same room. So i stopped trying but would like to set it up between my iMac and iphone / ipad but can't get it to work, they say discoverable but just will not connect to one another. I also tried the connection code and tried without one ... NO JOY ... Is this common or am i a twit ?

You can't connect an iPhone or iPad to a Mac via Bluetooth, except for Internet tethering.
You're not doing anything wrong - it just isn't a feature of iOS devices.
What were you hoping a Bluetooth connection would allow you to do?

What's the fastest way to share files live between 2 Macs in the same room?

Please can I have some advice on this scenario?
I'll need to share HD video footage between 2 new Mac Pros in the same room. 1 Mac will be used to upload the footage and the other to edit it using FCP. The footage can be stored either on hard drives in the edit machine or on desktop hard drives connected to the edit machine (or if there is a better option I'm open to advice).
What is the fastest way of sharing the files and what is the simplest way?
Any suggestions would be greatly appreciated.
Thanks in advance

What is the fastest way of sharing the files and what is the simplest way?
Fastest way? a fiber channel SAN connecting the two machines to a common fiber-channel based storage array. Can't beat it for performance, but it comes at a cost (think $20K as a starting point, depending on the amount of storage you need).
Simplest way? Some external media (thumb drive, external hard drive, etc.) that you shuffle between the two machines
Intermediate: a NAS-based storage box on your network, although be aware that real-time editing of HD video can overwhelm many low-end NAS boxes.

Two server sockets on the same machine, one not working.

Dear forum users.
I'm currently having a problem with running two server sockets on the same computer.
It gives no exceptions or anything, just that if i connect with another machine, the last serversocket that started,
will not accept connections..
Scenario:
Computer 1: Main server.
Computer 1: Game server.
Computer 2: Client
Computer 2 connects first to the main server (lets say port 13371)
Then connects to game server (port 6112).
Computer 2 failes to connect to the Game server for some reason.
But if i open a client at Computer 1, connects to main server, and then game server, it
works fine.
And if I put computer 2 as a Game server,
then everything works fine.
Working scenario:
Computer 1: Main server.
Computer 2: Game server
Computer 2: Client
Computer 1: Client
Now, however many that wants to connect to game server, works.
I have gone through the code 100 times now it feels like. And still dont see why this happends.
Anyone know if it is "working as intended"? Or just me doing something completely wrong that i cant see myself?
Sorry for not posting code, its too much code to post.

Oh, sorry.
TCPServer:
protected ServerSocket serverSocket;
public abstract void processConnection(Socket client);
    public void listen() {
        try {
            report("Listening to clients on port: " + portNumber);
            while (serverSocket != null && acceptConnections) {
                processConnection(serverSocket.accept());
                report("Client accepted on serverSocket.");
        } catch (SocketException e) {
            report("TCPServer/listenForClients : SocketException.", e);
        } catch (Exception e) {
            report("TCPServer/listenForClients : Unknown Exception.", e);
        cleanUp();
        report("Stopped listening on port: " + portNumber);
    }MainServer extends the TCPServer:
    public void processConnection(Socket client) {
        try {
            MainServer_Client tmp = new MainServer_Client(client, this);
            synchronized (clients) {
                clients.add(tmp);
            Thread th = new Thread(tmp);
            th.start();
        } catch (Exception e) {
            report("MainServer/processConnection : Unknown Exception", e);
    }GameServer extends TCPServer
    public void processConnection(Socket client) {
        try {
            client.setTcpNoDelay(true);
            GameServer_ServerClient tmp = new GameServer_ServerClient(client, this);
            synchronized(clients) {
                clients.add(tmp);
            Thread th = new Thread(tmp);
            th.start();
        } catch(Exception e) {
            report("GameServer_Host/processConnection : Unknown Exception",e);
            e.printStackTrace();
    }Edited by: Lgeee on Apr 30, 2010 2:57 AM

Curious why iMessage only works between my iPhone 4 and iPad 2 about 30-40% of the time even when they are in the same room?

I have an iPhone 4 and iPad 2 that seem to only sync iMessage about 30-40 % of the time. Some times I'll come home from work and my conversations are there and then they stop when I'm in the same room. If I start on the pad it works about 70-80% of the time. It is quite annoying seeing I got this silly thing so when home I can leave the phone and work load on the pad. Can anyone help. I'm going to bring up to Apple when I get a chance to go to a store but for now I thought I'd try this. Just in case, my wifi connection in house is also an apple product so this makes even less sense.
Thanks

If the Apple ID is waiting for verification and you haven't received the email with the verification link, you could try going to https://appleid.apple.com/, click on Manage My Account to the right, sign in, under your primary email address click on "verify now", which should resend the verification email. This is from Apple:
I didn't receive a verification email (within 48 hours).
Sign in with your Apple ID account and resend the notification. Search all of your mail folders for any emails coming from 'apple.com'.
I didn't receive a verification email (more than 48 hours).
You'll need to restart the registration process. You can reuse the same account information.

IPad2 will not connect to wifi unless it is in the same room

I live in the UK.
Yesterday I bought a new ipad2.
It will only connect to my wifi when it is in the same room.
When it is less than 2 metres form the router, it drops one bar, and when I go out of the room it drops connection completely.
I have an iphone and that connects to wifi from anywhere in the house.
I connect to wifi via BT and a BT router.
Please does anyone have amy suggestions to help?
Thank you.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

3 Master Sockets in the same room

Similar Messages

Maybe you are looking for