3 Masterpages in a floatable form with 2 pages

Hi there
I hope I don't bother asking... but since the help is not really good translated at this point, I am not able to fix it.
I got 2 floatable pages.
The first one is linked to masterpage1.
If the first page gets longer than 1 page (due to floatable fields), it should float into a page linked to masterpage2. (I do call them page1 and page1x)
Page 2 is linked to masterpage 3.
I made page1 and page1x work
Page 2 doesn't work though. Whatever I try, it always inserts additional pages. (Sorry that I don't translate my actions step for step... but I have LiveCycle in another language and the words are quite... specific)
I'd appreciate any help
Thanx
Lisa

Hi Lisa,
Have you tried setting page2 to specifically use masterpage3?
Niall

Similar Messages

Fillable form with multiple pages

I have a fillable form with multiple pages. However, when I save it and open it, it tabs to the end of the first page and will go back up to the top of the first page again. It won't tab to the second page. Instead, the user will have to click there cursor into the first field of the second page, tab through that, and repeat this process from page to page. If the person doesn't know there are multiple pages, they may believe they have finished the form once they get to the bottom of the first page, hit tab, and it takes them back up to the first field on the first page again. How can I make it go from the last field on the first page, tab, and first field on the second page?

Thanks for the reply. Since my post to this topic I discovered some things about tabbing. With out adding another master page but just keeping the one and making sure that it's occurance is set to a minimum of one and including master page in the numbering it will work as long as the order of fields in the hierarchy tab matches the order in the position of the fields.
I have a subForm that has a row of fields starting with a button then several text fields. I couldn't tab to the next page because the button was at the bottom of the hierarchy and it wasn't until I moved it to the top that I could finally tab to the next field on the next page. I also discovered that with a one page dynamic interactive form that has some expand able text fields in it and when the field expands so that any fields are pushed to a new second page tabbing seems to not work. In other words when I tab out of that field that is suppose to expand and a new page is added to the form the tabbing quits and in order for it to resume I have to click in a field and from then on it work even if it gets to where a third page and so forth is added. It is just when a one page (in my case) form turns into multiple pages for the first time.
Hope that makes sense.

How to 'flatten' interactive forms with Fixed Pages?

I have a large project I am working on that is automating the population of forms with strict layouts. (Provided by State governments for licensing requirements). I have the need to generate flattened version, or image of the document as one of the last steps of the process. The final step is to use "Insert Pages" to include into the newly created PDF, other PDFs that were attachments to the original document. These would include employment histories, Residential histories, etc. all are in PDF format.
The current method is to print the main document to "Adobe PDF", and save the file as a PDF to the file system. This newly saved PDF will accept Inserted pages as it is no longer deemed interactive with Fixed Pages, where the original with Fixed Pages will not accept insertions.
I have not been able to find a way of doing this via Javascript.
My goal is to find a way to flatten or image the document, then insert the attachments into the main document to create one compound instrument that records the licensure filing, and can be printed off and sent to the government, and retained for proof of filing.
Any ideas of how to replicate the print to "Adobe PDF" function and retain a handle to the new document object would be greatly appreciated. The fileName feature on the print method seems to be limited to ".ps", and ".prn" extensions.
Thank You
Mark

I have not been able to Add Pages to a form that has Fixed Pages - either through the UI, or JavaScript. Options are greyed out in the UI.
Could you expand on what you mean by "You can set the Designer properties to Print Form"?
Thanks
Mark

Html form with 2 pages

I have created a form with designer that has 2 pages.
In pdf, all works ok.
But when i render it to html, i only can display the first page.
How can i navigate between pages?
Thanks in advance

Hi,
If your rendering your form as HTML then you are probably using LiveCycle Forms. To navigate between pages you will have to create a IOutputContext object and assign it the value returned by the call to the EJBClient.processFormSubmission(...)in your servlet. You will then need to call the IOutputContext.getFSAction() method to determine what action was performed on the form. If the value returned by getFSAction() is 3 then the output of the processFormsubmission method is the Next page in the form. If the value is 4 then the output is the previous page in the form. If getFSAction returns either 3 or 4 then you can write just the data returned by the call to IOutputContext.getOutputContent() back to the web browser.
Trevor.

How to create a XML Form with confirmation Page

Hi!
I need to create a XML Form that have a confirmation page to enter de data and save it (into XML file).
It's possible to make it with the XML Forms Builder, or I need to make it manual at xml & xsl??
(Sorry about my poor english!)

Hi Ernesto,
there is currently no confirmation message available in the XMLForms EditForm. But you can use the "preview" button to show how it looks like, before you are using the "Save" button.
Regards
--Matthias

Need to know how to merge interactive form with text page pdf

I have an interactive pdf form, I need to merge this with another pdf page which is not a form. Kindly advice how I can do so using Adobe livecycle or acrobat pro X.
Regards,
Pooja

Hi Pooja,
How is your Interactive PDF form is created(LC Designer or Acrobat X). If you used LC Designer then you cannot merge the page, the only option is to create a new page in designer and copy and paste the content.
If you used acrobat to create the Form then you easily merge the PDFs using combine feature in Acrobat.( File> Create> Combine files)
Hope this helps. Let me know if you have any other question.
Regards,
~Pranav

Tabbing through a form with multiple pages!!!!! FIX!!

Hi everyone, I have a fix for this tricky issue of tabbing through a form that has multiple pages.
1. You'll need to go to the "master page" and add as many pages as you have "body pages".
2. Click the Object Veiw Tab and set the Occurence of the page to Max 1 and click the box with the instruction Include In Page Numbering.
3. Do this for each page of the form that you have.
4. The tabbing now should move from the 1st to 2nd to however many pages you have Master and Body Pages for.
Glad I could figure this out! Goodluck!

Thanks for the reply. Since my post to this topic I discovered some things about tabbing. With out adding another master page but just keeping the one and making sure that it's occurance is set to a minimum of one and including master page in the numbering it will work as long as the order of fields in the hierarchy tab matches the order in the position of the fields.
I have a subForm that has a row of fields starting with a button then several text fields. I couldn't tab to the next page because the button was at the bottom of the hierarchy and it wasn't until I moved it to the top that I could finally tab to the next field on the next page. I also discovered that with a one page dynamic interactive form that has some expand able text fields in it and when the field expands so that any fields are pushed to a new second page tabbing seems to not work. In other words when I tab out of that field that is suppose to expand and a new page is added to the form the tabbing quits and in order for it to resume I have to click in a field and from then on it work even if it gets to where a third page and so forth is added. It is just when a one page (in my case) form turns into multiple pages for the first time.
Hope that makes sense.

Insert Only Forms with custom Page Lifecycle class

I discovered a bug/inconsistency in the JHS Generator:
The business case (translated to the HR schema) is
We have an Insert Only form for creating new Departments. (Group name: DepartmentsEntry)
When the user saves a new Department, we want to forward them
using the Faces Navigation Handler to the group named "Departments".
The implementation we used:
- Create a custom class which extends oracle.jheadstart.controller.jsf.lifecycle.JhsPageLifecycle.
This class overrides the onCommit method: if there are errors we stay on this page,
otherwise we redirect the user.
- Specify this classname in the Page Lifecycle Class property (under "Customization Settings") within the Application Definition Editor.
When we then try to run the page, the Insert-Only form does not work as expected;
The user has to click on the "New Department" button first.
I see that the specified classname occurs in the ControllerClass property of
the Page Definition file DepartmentsEntryPageDef.xml file.
The way I solved the problem was to create a custom groupFacesConfig.vm template
which specifies the managed-bean-class property of the ${JHS.current.group.name}PageLifecycle managed bean.
This then solves the problem - the InsertOnly form works as expected.
This is not as I would expect the "Page Lifecycle Class" property to be used.
In my opinion the "Page Lifecycle Class" property should also be used in the default groupdFacesConfig.vm template and not only in the Page Definition file.
Is this behaviour expected?

Cliff,
You are right, this is a bug that has been fixed for the upcoming 10.1.3.2 release.
Steven Davelaar,
JHeadstart Team.

Reset Select List in Form With Report

Hi,
i have Created Form with Report Page. I have three select List on this page.
1-Market Name Select List with Redirect
2-Customer Name Select List with Redirect
3-Contect Person
when i select market Name then Respective Customer name is select In to select List Customer Name.
When i select Customer Name Then Contact Person is Select in Select List Contect Person.
Problem is when i select Customer Name from Select List then Contact Person comes into Contact persion Select List But the value in select List Customer Name and Market Name is not dispaly , Display Only -Select Market - and -Select Customer Name- .
I want when i select Customer NAme From Select List then value from MArket and customer Select List should not be reset.
How can i do this.
Thanks
Edited by: 805629 on Jan 26, 2011 10:45 PM

Try 'select list with submit', not "select list with redirect". Redirect usually doesn't save the values in session state so they are lost when the page repaints.

Smart form problem with multiple pages & table problem

Hi experts,
I have a problem with my smart form with multiple pages
Situation: I have a smart form that ALWAYS has at least 2 pages. In one page the quotation, in the second page (basically this is the 3rd page as the 2nd page is optional) the terms and conditions. Sometimes however, when there are many items in the quotation more than 1 page is needed for the quotation.
The (optional) second page of a quotation has a different header than the first page of a quotation. So I made a second page with 2 secondary windows (where the header texts are in). The main window is after the secondary windows and has to finish the quotation.
The problem is that my headers of the second page are never printed, it stays a blank space. The table however does continue and is printed.
Another problem I have is that I have a table (with the quotations) with 6 columns. The first 2 columns are displayed correctly but once the 3rd column the columns are shown on a lign below.
Regards,
PJ

I would suggest another approach to this problem.
Use just one page. For the headers on the first page, use a secondary window and on the conditions tab, choose the additional event - Only on First Page.
For the different header on the second page, create another secondary window on the same page (probably even overlapping the first header on your layout). But in this one, on the conditions tab, choose the additional event - Not on First Page.
The table should flow as you would be using the Main window for this one.
As for columns, if they are too wide and wont fit in the same line, it would move to the next line. So you would have to re-adjust the line width and test.
Hope this resolves your problem.
Regards,
Ancy
Edited by: abapfreak on Oct 4, 2010 11:52 AM

How to create a MD form using dynamic page ?

Rahul and Sharmila,
You have answered several of my queries earlier and I am thankful for them.
I have been trying to creating a MD form using dynamic page and I haven't fiqured it out. I need help. You both advised me on creating a simple form using dynamic page. The complexity changes drastically when I have to create a MD form. Has no body ever tried to create a MD form with dynamic page?
I haven't heard from you anything either. I am stuck with this and I need help urgently. Would you kindly tell me if this is possible and how ? Otherwise, I will stop crying for help on this.
Thanks for your kind attention.
Mainak

Hi,
I have replied to this in the morning.
Re: Oracle portal and JSR 168 compliance
Hope it helps.
Thanks,
Sharmila

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have created a .pdf form with text boxes, but the recipients are unable to fill in their answers.

How can I distribute a form with text boxes so that the recipients are able to type into the boxes?

This forum is for the Adobe FormsCentral (formscentral.adobe.com) which is a service that allows you to create, collect and analyze data using an online web form. You should ask PDF related form questions in the Acrobat forums: http://forums.adobe.com/community/acrobat/forms
I'll move your post to that forum so you don't need to retype it. They can help you out...
Randy

I have created a PDF form with field but for some reason I cant type in them

I have created a PDF form with field but for some reason I cant type in them

May be that the text fields are read-only.

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

3 Masterpages in a floatable form with 2 pages

Similar Messages

Maybe you are looking for