3 min delay on search

I have created a simple 2 page site with an Access database
in asp. When I search, the results come without a problem. If i
search again (same or different query) I get this error:
Error Type:
Provider (0x80004005)
Unspecified error
/msds/display.asp, line 15
If I wait for 3+minutes, I can search again without this
error, but again after the 2nd search, I have to wait another 3
minutes. This occurs when hosting the site on a server. There is no
connection problem or search problem if I run it locally. No error
messages appear. All System DSN connections are the same on server
and local. Any ideas?
My connection is:
<%
' FileName="Connection_odbc_conn_dsn.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
Dim MM_msds_STRING
MM_msds_STRING = "dsn=msds;"
%>
Thanks

Alexander,
Do you use column view in your Finder windows? If so, how fast of a Double-Click speed do you have set in the Mouse preference pane of System Preferences? I believe that the slower the double-click speed you have chosen, the more the Finder will seem to "lag" when selecting a different item in column view.
That 3 second delay after your first mouse click could be the Finder waiting to see if there will be any more mouse clicks before the end of the specified double-click interval. If there are more clicks, the Finder will know to group those clicks with the first one, thereby interpreting the entire event as a double-click, triple-click, etc. If there aren't any more clicks at the 3 second mark, then the Finder knows it was only a single click, and it will then "register" the click and show you the contents of the selected item in the column to the right.
The new user account most likely has the double-click speed to the default, which is fast enough so that the Finder doesn't seem to lag when you select items.
Try raising the double-click speed to a higher setting to see if that might help.
Hope this helps....

Similar Messages

  • Weird issue with 10.0.1.0 on Linux - 5 mins delay in server start-up!!

    Hi ...
    I am having some weird (and unique??) issue with WLS 10.0.1.0 on RHEL servers.
    WLS installation on our DEV env works perfectly fine and the server starts up in 15-20 secs. for each of the two domains created on it.
    But the QA server is another story all together ! ... It has the same OS and version, WSL installation and version, hardware configs, processes running at the time of start-up etc. But the problem is that when I try to start the server on the only domain on that server, it always gets delayed by 5-6 mins in between the startup at this point -
    +&lt;Feb 17, 2009 *7:04:50 *PM UTC&gt; &lt;Info&gt; &lt;Management&gt; &lt;BEA-141107&gt; &lt;Version: WebLogic Server 10.0 MP1 Thu Oct 18 20:17:44 EDT 2007 1005184 &gt;+
    +&lt;Feb 17, 2009 *7:10:56 *PM UTC&gt; &lt;Info&gt; &lt;WebLogicServer&gt; &lt;BEA-000215&gt; &lt;Loaded License : /opt/bea/license.bea&gt;+
    (Notice the 6 mins delay in the timestamps)
    There are no logs getting generated within this time and it seems like the WLS 10.0.1.0 just spaces out
    After the delay it starts up pretty fast .. within 10-15 secs!!
    Anybody here seen such behavior with WLS
    thanks,
    --Shailesh Welankar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    I recommend taking some thread dumps during this delay and contacting support to get some advice.
    You can take the thread dumps by kill -3, JRockit Mission Control, etc.

  • Max delay and Min delay on same data path

    Hello, 
    I am trying to set up timing constraints (both max and min delay) on a data path between two combinatorial elements. 
    I use set_max_delay -from [get_pins pin name] -to [get_pins pin name] 6 -datapath_only 
            set_min_delay -from [get_pins pin name] -to [get_pins pin name] 4 
    I checked the timing report and I see that the max_delay constraint is satisfied but the min_delay is not.What can be the reason behind this? 
    Also, when i comment out the first line (max_delay constraint), I see that min_delay constraint is satisfied. 
    Can't a datapath have both max and min delay constraints?
    Any help will be really appreciated. 
    Thanks! 
    -Kamath 

    Be very careful about trying to set max/min delays on a portion of a path (i.e. not from a valid startpoint to a valid endpoint). Doing so is called path segmentation. When you do so, the max/min delay gets applied to the portion of the path you specified, but the rest of the path (between the startpoint and the set_max_delay -from and from the set_max_delay -to to the endpoint) are no longer constrained at all.
    There are extremely few reasons to want to do this. I second the question "Why do you want to do this?"
    That being said, you can set both a max and min delay on the same path (or path segment, if you insist on segmenting the path). The set_max_delay overrides the setup requirement, and the set_min_delay overrides the hold requirement. If the two values are too close together the tools will not be able to satisfy both; all timing checks are done at both process corners (max PVT and min PVT) - the ratio from max to min is generally around 3:1, so if the set_max_delay is less than 3x the set_min_delay the tools will be unable to satisfy both (due to real, physical limitations).
    Avrum

  • Controlling within mini-player clears search field - annoying bug

    I've come across this annoying (repeatable) bug with iTunes 9... when I listen to music, I like to put an artist's name in the search field, then just let it play on shuffle from those search results. Typically no big deal, however, if I switch to the mini-player, then use any of the controls (play, forward, back) on the mini-player, the search field gets cleared out and it's just playing through the entire library. It's annoying to have to re-enter what was in the search field when it clears like this.
    Does anyone else have this issue? Is there a way to fix it? So far I'm just being careful not to touch the controls in the mini-player while listening to a selection narrowed down from the library with the search field.

    wishnias wrote:
    Is there a way to fix it? So far I'm just being careful not to touch the controls in the mini-player while listening to a selection narrowed down from the library with the search field.
    As a work-around, there is a freeware program that allows full iTunes control from the OS X menu bar which will avoid the need for using the mini player. You can close the iTunes window while leaving the program running and your search will remain intact. Get it here: http://www.apple.com/downloads/macosx/ipod_itunes/youcontroltunes.html

  • Seagate 200 Gb HD replacement in iMac = 2 min. delay after wake up

    I replaced my factory Seagate 80Gb SATA (ST380013AS) with a 200 Gb SATA (ST3200827AS) hard drive. Ever since, my G5/1.8 GHz iMac freezes for two minutes after waking up. I've scoured Seagate's web site to see if I need to alter any settings, such as start up delay for RAID, but I couldn't find anything.
    Initially I thought it may have been related to the 10.4.5 update or any of the security updates, but I did a clean install of the original 10.3.5 that came with the iMac and the wake up delay is still there. I also reinstalled my original 80Gb SATA hard drive and there was NO delay. So I conclude that there is some issue with the Seagate 200 Gb drive and OS X. Other than this annoying issue, the drive performs great.
    I also noticed that 2 out of the 4 pins on the original 80Gb hard drive have a jumper on it. The new 200 Gb doesn't but the specs says to install a jumper to limit to 1.5 Gbits/sec on the same two pins. The jumper made no difference and I still have the 2 min. delay.
    Has anyone else experience this ? Better yet, does anyone have a solution for this ?
    G4/1.67 Powerbook, G5/1.8 iMac   Mac OS X (10.4.5)  
    G4/1.67 Powerbook, G5/1.8 iMac   Mac OS X (10.4.5)  

    I can't imagine any reason why MacOS Extended (Journaled) shouldn't be fine, or that the installer's erase would be any different from Disk Utility's, although Seagate's procedure does specifically specify using Disk Utility before continuing with the installation of OS X.
    However, there may be a problem using 10.3.5's format routine with a drive running 10.4.x, since Tiger has introduced some subtle changes in the directory structure & (I think) D.U. wasn't updated for this until 10.3.9. If you can't resolve this issue any other way, it might be worth erasing with 10.4.x's D.U. & then re-installing 10.4.x, but I think this has a very low probability of success.
    If you haven't already done so, you should run D.U.'s repair disk on the Seagate & Apple's Hardware test on the iMac to see if they turn up anything. Techtools (Pro or Deluxe) also does some disk checks, so try that if you have it. It is possible you have a defective drive, one that is having trouble spinning up or stabilizing until it warms up. I'm not sure any of these utilities will spot that kind of problem, but it is worth a try.
    You could also keep Activity Monitor running & frontmost when you sleep the iMac, set to show disk activity. Look carefully at what it shows for drive data rates as your iMac comes out of sleep. If the data rate is very low, then slowly or suddenly ramps up to a high level sometime after you do anything that starts the spinner, it may indicate a drive problem.
    Message was edited by: R C-R

  • IPod Mini Delayed Write Error

    Hi, I have an iPod Mini 2G, and It has a delayed write error when I try to update it in Windows.
    I ran the Diagnostics and it said the Hard Drive failed. I stil have about two months left onb the service plan. Should I send it in?

    Welcome to Apple Discussions!
    If the HD test is failing in the iPod diagnostics, then I would send it in...
    iPod Service
    btabz

  • IPad Mini - Carrier keeps searching

    I have a iPad mini wifi+cellular which after one of the iOS updates has disfunctioned the Carrier Searching. The Carrier now shows searching all the time and the Carrier option in the Setting Comes and Goes. I have tried updating to latest iOS and also testing with multiple sim cards which work on other iPhone. Not to mentione other steps like power down, restart, etc. has all been done.
    Any help and solution is appreciated.

    Also, to add the iPad worked like charm for around 6-7 months since when it started giving the issue. I was not using it for last few months and need to get it fixed now so that I can start re-using. It is not covered in warranty any more.

  • Min to Max Search Web App

    Little Help.  Need to add a search function that will look for a minimum number up to a maximum number from a search form. Already looked up and found some info in bcguru but this only shows a date min and max. Couldn't locate anything else within BC help.  Any direction would be great.   

    Well you can do anything from developer's perspective but asking client to put same value twice can make you look unprofessional.
    Here's what I did for many house listing websites.
    1. Client puts price in pure number format ( e.g. 500000 )
    2. wrap the price value with a tag in List/Detail template e.g.   <span class="house-price">{tag_price}</span>
    3. then at the end of the page put a jQuery snippet which would globally format the prices ( e.g. $('.house-price').formatCurrency(); )
       Here's one I use
      https://code.google.com/p/jquery-formatcurrency/
       even if you're not familiar with jQuery it's pretty easy to follow
    No more complain from client

  • 8.1 Mini Player drops searches

    Just upgraded to 8.1 for windows. When I do a basic search in my music library (say for an artist) and then start playing and put iTunes in Mini Player mode, after a couple of tracks, it drops the search. It especially does this when I jump back out of mini player.
    Anyone else see this? Any way to downgrade?

    Same issue here. I know I've done this in the past without issue so it must be an 8.1 issue.
    I can do a search in the library, play with shuffle on and press "next" hundreds of times never leaving the search results. But after switching to mini mode and pressing "next" only a few times iTunes plays random songs from the library which no longer fit under the searched term(s). After restoring the iTunes window I can see that the search field has been cleared.
    Hope they fix this in an update soon.

  • ITunes 9 Mini-Player and search option

    Before I downloaded iTunes 9 and was running all my music through iTunes 8, I was able to search for keywords and that became the playlist. I switched to Mini-Player and it continued endlessly through this selected search. I am not able to do that with iTunes 9, I search for songs, switch to Mini-Player and the search somehow escapes itself and starts playing my whole Music listing of songs.
    Is anyone else having this problem?

    I have this issue, both on my computer, and on my girlfriend's Macbook Pro. Prior versions of iTunes would constrain its Shuffle to within my search results when using the Search function in the upper right corner of iTunes. 9.x basically ignores the search results, and shuffles within my entire library. There doesn't seem to be any way to fix it, as there are very limited "shuffle" options in the Controls menu.

  • Mini Player Clears Search Results

    If I perform a search in iTunes (e.g. for an artist), and then switch to the mini player, iTunes will continue to play music only from my search results.
    If I press the Next or Previous buttons on the Mini Player, the first time I press the button, the song will also be from the search results. Each press after that (or if I allow iTunes to finish the track) will bring songs NOT from the search results, but from my whole library.
    Has anyone else experienced this? Does any one know a way to resolve the issue?

    After you search for the artist, *Ctrl click* the arrow after the artist name to see all items by that artist in yoru library, then play and open the mini player.
    Better yet, instead of search, simply turn on the browser (iTunes menu View -> Column browser) then select the Artist to see everything by that artist.

  • My IPhone 4 blue tooth does not connect with other other mobile phones. Other devices find me. Mine just keeps searching.

    Tried sending a friend a photo via blue tooth from my IPhone 4 to his black berry.
    His device finds me, but mine does't find his. It just keeps searching.
    Am I doing something wrong, pr does IPhone not support this?

    blue tooth in iphone is only for headset support means you can only connect a blue tooth head set with your phone thats about it for blue tooth functionality,
    You cannot transfer files with other phones or your PC, thats the standard behaviour your phone is fie

  • I can't find my iPad mini in iPhone search

    My locación Systems is like desactived i'm triying to finded butacas i can't what can i do?

    what I did was: I have repaired itunes first, that did not work, then I reinstalled itunes.
    During that process I got the report from Apple update center that was a new version. I installed that and still not see my ipad itunes

  • Slow Response for Export after returned results 2-3 min delay

    Hi,
    Wondering if my problem is unique or if there is a solution.
    When I run a long query - takes 5-6 minutes to return about 30,000 reults and I select Export, CSV, it takes 2-4 minutes before I can choose the file to export to.
    It seems very slow and is even slow if I make sure that all of the results are returned.
    \Any ideas?

    I've seen this problem in 1.5.4 with both patch sets installed and when exporting to an XLS. Also, before I applied the patches the dialog window would sometimes never appear after right-clicking the results data grid and choosing "Export->xls". However, I've never experienced this behavior when exporting the exact same results from the exact same query and database in a 1.5.1 worksheet. I've got a suspicion that the problem may not be with SQL Developer itself, but with either the JDK or IDE; however I haven't done any testing in this regard.
    Here' my version info from 1.5.1:
    CVS Version Internal to Oracle SQL Developer (client-only)
    Java(TM) Platform 1.5.0_06
    Oracle IDE 1.5.1.54.40
    Versioning Support 1.5.1.54.40
    And the same (plus patch set info) for 1.5.4:
    CVS Version Internal to Oracle SQL Developer (client-only)
    Java(TM) Platform 1.5.0_17
    Oracle IDE 1.5.4.59.40
    Versioning Support 1.5.4.59.40
    SQL Developer Patch oracle.sqldeveloper.patch 11.1.1.59.59 Loaded
    Ed. H.

  • Delay in TO creation from TR created thru' material document

    Hi Friends,
    We are experiencing fluctuating delay in TO creation with respect to TR, generated through material document (GR against process order, IM movement type 101 - F). We have set automatic TO creation in background ("A") in customising in WM> interface> IM-->define movement type.
    Material document posting is done thruough custom transaction thru' BAPI_GOODSMVT_CREATE.
    Can you please help to find out possible reasons?
    Thanks in advance,
    Sudhir

    Dear All,
    Thanks for your replys and suggestions. Still I haven't found any root cause for this problem. But develpoed a background job which serches open TR's for source storage type 901 and convert them into TO's. This job runs every minute. So if any TR remains open, it get converted into TO within max. 1 min. Anyway search is still on on other related issue to find out the cause. Many Thanks for suggestions again

Maybe you are looking for

  • Private Key is incorrect or Hash not Set

    SAP B1 2007A latest patch and WebTools just downloaded:- I am very new to WebTools and am having a problem with sync i.e. I get the following message "Private Key is incorrect or Hash not Set" and nothing synchronsies. I also have "NO INTERNAL ACCOUN

  • Wireless adapter Z-Com XG-703A doesn't work with WPA after reboot

    Hello everybody, Arch doesn't load kernel module arc4 during boot with usb wireless adapter Z-Com XG-703A. So WPA doesn't work and It can connect to only opened access points. I found two work arounds but I don't know how to fix the issue completely.

  • Functional specs for output of ship and debit contract

    Hi All, Does anyone have a doc on the functional specs for output of ship and debit contract? If so pls email me at [email protected] With Thanks & Warm Regards SK

  • Process chians r not running as per the scheduled time.

    Hi sriends, Unable to run the process chains(back ground). Every day our process chains r runing properly but all of sudden they are not triggering on the specified time and there is no error msg. pls give me some idea to resolve this.... Thanks in a

  • Oracle R12 SCM Training

    Dear All, This is Hitesh Parsawala. I am a MBA (Mktg) with 4 yrs Work Experience as a Project Manager. Now I am going to take Oracle R12 SCM - Training from Oracle Authorised Education Center - iWarelogic - Pune. So i just wanted to know how is the m