3 R/3 Systems

Dear all,
         I am connecting <b>3 r/3</b> systems into one BW system. There will be only <b>one cube</b> in the BW, which is material movement. Now i would like to know, How i can identify which data is comeing from which r/3 and how can i use the same into the reports. All the three r/3 systems have common format of data eg: mat num. But i am not sure of master data if its common. what should i do if its not common.

Hello :)Santhosh,
How r u ?
U can Compound the 0SOURSYSTEM with 0MATERIAL (Material Number). Now it is possible to identify to which source R/3 system the data belongs to. Also u can use this in Reports.
Procedure:
GoTo change mode for 0MATERIAL
select COMPOUNDING Tabstrip
then check "MASTERDATA LOCALLY FOR SOURCE SYS"
Activate the 0MATERIAL InfoObject.
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

  • Same EPM Excel Report takes time to open and refresh on 1 system while it opens and refreshes faster on other system

    Hi All ,
    I am facing an issue where the EPM Excel Templates on SERVER ROOT FOLDER take time to open on 1 system . It also takes great amount of time to REFRESH . While on an another system the same Report opens rather quickly and refreshes also quickly .
    Regards,
    SHUBHAM

    Hi Shubham,
    Now day excel problems are due to some MS update.  Not sure but  have a look at below note.
    2107965 - Issues in EPM Add-in after installing Microsoft updates

  • Remote System and Remote Key Mapping at a glance

    Hi,
    I want to discuss the concept of Remote System and Remote Key Mapping.
    Remote System is a logical system which is defined in MDM Console for a MDM Repository.
    We can define key mapping enabled at each table level.
    The key mapping is used to distinguish records at Data Manager after running the Data Import.
    Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
    Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
    Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
    If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
    Now, I have to look at Data Syndication and Remote key.
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    Regards
    Kaushik Banerjee

    You are right Kaushik,
    I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
    Yes, but if they are duplicate, they needs to be merged.
    But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
    This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
    Pls refer to these links for better understanding.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
    Hope this helps,
    + An

  • Error while creating a support message in satellite system

    Hi,
    I am facing an error while sending a support message to solman form the satellite system
    (( Error Description :  Error in Local Message System: Error when opening
    an RFC connection Message was Not Created ))
    1) I gone through various threads and set the required authorizations like
    SAP_SUPPDESK_CREATE and
    SAP_SV_FDB_NOTIF_BC_ADMIN ,
    SAP_SUPPDESK_ADMIN
    for the user in the solman .
    2) I checked the RFC connection and it is working fine.
    Anyone pls help me to resolve this issue

    hi rohit,
    thanks for u r immmediate response
    do i have to assign the roles to the user in the satellite system or the solman.
    some roles in those 4 roles are not in the satellite system.
    thanks
    Rahul

  • System Image Restore in Window 8.1

    I have not been able to find a data migration application that works at cloning a Windows 8.1 hard drive to a new SSD.  With that in mind I want to go about moving the contents, data and operating system from my working C: to a new SSD.  I want
    to go about it as if I have backed up my system, my C: drive has failed so I need to install a new drive and restore my data and operating system to the new drive.  I can't seem to find any simple (this should be simple) straight forward way to do this
    nor can I find any form of written instruction on how to go about this. 
    I would love to have someone articulate this.  As it stands I have a fully operational intact C drive.  I have completed a disk image to a second separate hard drive.  I now want to restore that content to a third (SSD ) drive.
    Where do I begin? 

    There is a system backup tool called System Image Backup, follow these steps to conduct this:
    Swipe in from the right edge of the screen, and then tap Search.
    (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.)
    Enter File History in the search box, tap or click File History, and then click System Image Backup at the left part.
    See the screenshot as below, you can backup it on local machine or a DVD or a network share folder:
    Besides, I need to point out that this backup method will generate a vhd file, if you want to restore the system you need an DVD installation midia.
    You cannot just restore a vhd file directly to the hard drive.
    regards
    v-yamliu

  • I tried to install latest OS update. Recd error installing. IT tried to load the upgrade in Safe Mode. Now system will not boot up. IT says I have to do a clean install which loses all data.

    After receiving an error when I try to install the latest update of OS-X, I took my laptop to oour schools IT dept. They tried to run the update in safe mode and then they got an error saying the system could not find the hard drive. Now they want to run a clean install which loses 1000's of docs and pictures. I have Block I exams in med school next Monday and all of my notes and slides are on that hard drive.
    The IT dept took the hard drive out and tried to back it up and they said they other computer could not connect or find my hard drive.
    Major panic....
    I have Norton antivirus and have never found any viruses on the system. I also have a program called ExamSoft which some other students here have noted they had similar crashes. Not sure if that is the issue...

    Several take home messages here:
    always back up before you update.
    always back up anything you don't want to lose. Kind of like flossing. Only floss the teeth you don't want to lose.
    Norton is very, very bad software, and you should get rid of it.
    You don't need antivirus software on your mac. Antivirus software on macs causes more trouble than it is worth.
    Your hard drive may be failing and thus may not be salvageable.
    You could try booting into the recovery partition and seeing if you can repair your hard drive.
    If that doesn't work, then there is a small chance that a third party utility (like Disk Warrior or TechTool) might be able to fix your drive (if it is not failing).
    If that doesn't work, you may be able to send your drive and a lot of cash to a drive recovery service and see if they can get your files off it.
    In the mean time, get notes and slides from a (smart) friend.

  • How do I install all my old programs and data from an old system folder after I have reinstalled the same OSX system after a crash?

    The system is OSX10.5.8 Leopard on a 2009 imac. A new system was installed from the installation disks and the original system saved to a folder.
    I need to use my Adobe programs, rescue my email, i-tunes and iphoto data.  The disk utility indicates that my Time Machine back-up disk is damaged and I don't want to take a risk of having Time Machine erase my hard drive and try to reinstall the exact system existing at the time of the crash.  There was over 650 gb of stored files that I was copying and removing from the drive at the time it crashed. The total size of the original system file is still about 650 Gb.
    I would prefer to go back in Time Machine and only rescue the programs as most of the files have been copied to external hard drives, but I can't access the back-up hard drive from the new version of the Time Machine.  Or by I don't want the Time Mchine to start copying the new operating system which would include all the data in the old system file. Time Machine was working fine at the time of the crash.

    No, the disk was backed up with time machine a few hours prior to the crash.  I was unable to open the computer when I tried to restart it- got a grey screen with the spinning disk- after a few minutes the screen would go black and would reboot continuously, but not load any images or programs. I started the computer from the 10.5.4 installation disks and checked both the time machine external hard drive and the Imac internal drive with the disk utilities. Both showed as damaged --the internal drive and permissions were repaired, but the external drive (time machine back-up)  was damaged and not repairable by disk utilities. I don't believe that the external drive for Time Machine was connected to the computer at the time of the crash as I was copying files to a different hard drive drive. And I was not having any problems with the TM back-up drive prior to the crash.
    I accessed the Imac internal disk by firewire (as a target disk) and copied as many data files as I had room for on my external hard drives available.  And I deleted quite a few files from the imac internal drive (mostly just jpegs, duplicate tifs, etc--nothing that was used by i-photos, i-tunes or the Mail program).
    Then I installed a new OSX10.5.4 system from the installation disk and the old system was moved to a folder on the hard drive.  I previousy had had the option to reinstall the complete system from Time Machine when I connected that drive and booted with the installation disks with the C key depressed.  But it didn't seem like a good option because I was unsure of the condition of that external disk and whether it would be able to reinstall my data correctly, once it had erased my internal hard drive. 
    I'm considering buying some new external hard drives and backing up the present system to time Machine (so I'll still have my old data in the old system folder).  And then I would try using the old Time Machine back-up to try to reinstall the sytem previous to the crash.  That back-up would reinstall about 700gb of data and operating software and programs which sounds like a lengthy back-up.  Since I have never used Time Machine to do a full reinstallation (I've only used it for individual files), I'm reluctant to do anything rash.
    I'm a professional designer (with a deadline) but I can still use my Illustrator and Photoshop by opening them from the old system folder and saving the files to an external drive.  So it's not neccessary to do anything hasty except to delete some of the excess art and document files that were causing the computer to run slowly and the  Adobe programs to crash when I tried to save my work. I have quite a few books on tape in the i-tumes folder which is probably talking up tons of space but I don't where the i-tunes files live.
    Thanks for any help. Peggy
    Message was edited by: peggy toole

  • Logical Systems in Business Services

    Hi
    In Business Service creation, for Adapter Specific Identifiers, the parameter for the Logical System. It is only possible to assign one logical system to one Business Service ?.
    i.e. to do
    MyBusServ1, Z_LS_1 
    MyBusServ2, Z_LS_1
    is not possible ?
    When trying to assign Z_LS_1 to MyBusServ2 I get the error that Z_LS_1 is already assigned. Is there a way to circumvent ?, I do not want to create two logical systems in R/3 as the IDOCS types submitted by the Business Services are the same.
    Thanks
    Damien

    Thanks for the replies
    Sarvesh - The Business service is the sender of the information \ IDOC. If I remove the Adapter specific config then how will XI know what Logical system to apply to the IDOC ?.
    Jaishankar - I am creating two IDOC's in SAP. MATMAS and PORDCR. The input file are coming from two different source systems. lets say sys1 and sys2. Both of thse for clarity are created in my scenario as Business Services. sys 1 creates MATMAS and PORDCR IDOC's int he syatem, sys2 creates PORDCR IDOC's in the system. As sys1 and sys2 are related in that they created the IDOC's as part od the same project then I would like to collect in the same partner profile in SAP e.g. Partner Profile ZPP_IDOC with IDOC types MATMAS PORDCR that serve as input for both systems. Logically I would assume that I can assing the logical system ZPP_IDOC to both the adapter specific parameter in both sys1 and sys2.
    Thanks
    Damien

  • Logical System in IDOC-XI scenario

    Hi,
         I need help to understand few things in IDOC-XI scenario, could any one help me in this regard.
        we use Adapter specific identifiers to map services, we have following type of identifiers 1) Sys.ID & Client No.  2) Logical System. 
    my questions are
    a) Are we use Logical System in B to B scenario ?
    b) Are we use LS in reference to the SAP system or Non SAP system ? if a non SAP system....how a non SAP system send an IDOC and why a non SAP system receive an IDOC ( conversion is possible in XI ) ?
    Thanks and Regards
    Mahesh.

    Hay Kumar,
    Logical systems can also be used for SAp sytems wich are not installed yet as a virtuall placeholder.
    a) yes. if on of your business is a non sap system or a propritery system that you developed yuo'll ue LS.
    b) non SAP system can send and recieve IDOCs. so it's possiable to get an IDOC from a system and turn it into an RFC for SAP or get an IDOC from an SAP system and then turn it into something else for another system.
    Have a Good One,
    Uri Lifshitz.

  • Refresh System Data in Integration Directory PI 7.11

    Hey,
    I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
    I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
    anymore.
    Can anybody help?
    Thanks!
    Michael

    I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
    I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
    Tools (or right-click in ID) --> Assign Business System --> follow the wizard...it will assign the business system from SLD to ID

  • Support package / add on import error in DB2 V9.1 / windows 2003 system

    Hi
    I have installed ERP 6.0 IDES version in Windows 2003 server with DB2 LUW 9.1 / FP5.
    I have selected "Row Compression" and "Deferred Table Creation" during installation.
    Now when I am importing add on BI Content 7.03, I am getting error during Movename tabs phase.
    Error in phase: IMPORT_PROPER
    Reason for error: TP_STEP_FAILURE
    Return code: 0008
    Error message: OCS Package ALL, tp step "6", return code 0008
    The error message in the file D:\usr\sap\trans\log\P090113.IDS is as follows,
    2 ETP301
    3 ETP361 "96" Shadow-Nametabs activated, DDL executed
    2 ETP362 "6" Shadow-Nametab activations failed
    2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2009/01/13 02:57:51")
    2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2009/01/13 02:58:07")
    2 ETP301
    1 ETP172 MOVE OF NAMETABS
    1 ETP110 end date and time : "20090113025807"
    1 ETP111 exit code : "8"
    1 ETP199 ######################################
    I have read some notes it may be due to "Row compression" and "Deffered table creation" option in DB2. Please help me in resolving this issue if it is DB2 related.
    Regards,
    Nallasivam.D

    Hi,
    Please find the real error message which I found in the same log file. This is a new installation.
    System configuration details:
    ERP 6.0 IDES SR3 + Windows 2003 enterprise server SP2 + DB2 V9.1 / FP5
    BASIS and ABAP support pack level: (700) 13.
    Error message:
    3 ETP399 INDEX IN "IDS#BTABI"
    3 ETP399 LONG IN "IDS#BTABD COMPRESS YES"
    3 ETP399 
    2WETP000 02:53:26: Retcode 1: error in DDL statement for "/OSP/T_REPINFO                " - repeat
    2EETP345 02:53:38: Retcode 1: SQL-error "-107-SQL0107N  The name "IDS#BTABD COMPRESS YES" is too lo
    2EETP345 ng.  The maximum length is "18".  SQLSTATE=42622" in DDL statement for "/OSP/T_REPINFO   
    2EETP345             "
    2 ETP399  -
    DB-ROLLBACK() -
    3 ETP399 INDEX IN "IDS#POOLI"
    3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
    3 ETP399 
    2WETP000 02:54:05: Retcode 1: error in DDL statement for "/SAPPO/CMP_ASG                " - repeat
    2EETP345 02:54:17: Retcode 1: SQL-error "-107-SQL0107N  The name "IDS#POOLD COMPRESS YES" is too lo
    2EETP345 ng.  The maximum length is "18".  SQLSTATE=42622" in DDL statement for "/SAPPO/CMP_ASG   
    2EETP345             "
    2 ETP399  -
    DB-ROLLBACK() -
    2EETP334 02:54:17: error in DDL, nametab for "/SAPPO/CMP_ASG" not activated
    3 ETP399 IN "IDS#POOLD"
    3 ETP399 INDEX IN "IDS#POOLI"
    3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
    3 ETP399 
    2WETP000 02:54:17: Retcode 1: error in DDL statement for "/SAPPO/CSCRN_HDR              " - repeat
    2EETP345 02:54:29: Retcode 1: SQL-error "-107-SQL0107N  The name "IDS#POOLD COMPRESS YES" is too lo
    2EETP345 ng.  The maximum length is "18".  SQLSTATE=42622" in DDL statement for "/SAPPO/CSCRN_HDR 
    2EETP345             "
    2 ETP399  -
    DB-ROLLBACK() -
    2EETP334 02:54:29: error in DDL, nametab for "/SAPPO/CSCRN_HDR" not activated
    3 ETP399 INDEX IN "IDS#POOLI"
    3 ETP399 LONG IN "IDS#POOLD COMPRESS YES"
    3 ETP399 
    2WETP000 02:54:29: Retcode 1: error in DDL statement for "/SAPPO/F_ASG                  " - repeat
    2EETP345 02:54:41: Retcode 1: SQL-error "-107-SQL0107N  The name "IDS#POOLD COMPRESS YES" is too lo
    2EETP345 ng.  The maximum length is "18".  SQLSTATE=42622" in DDL statement for "/SAPPO/F_ASG     
    2EETP345             "
    2 ETP399  -
    DB-ROLLBACK() -
    2EETP334 02:54:41: error in DDL, nametab for "/SAPPO/F_ASG" not activated
    Regards,
    Nallasivam.D

  • How to pop up a system message for a specific user when She/He log on SAP

    Hi Friends,
    As we know SM02 setting will pop up a system message to all users in specific client in a specific period when the user log on SAP system; and we can do the same thing via using function module SM02_ADD_MESSAGE.
    But now we want to pop up a message to a specific user ID when somebody log on SAP via this ID, instead of all user IDs in the client. Please do we have any similar traction / function module / class method to to do this job??
    Thanks in advance.
    Joe

    Below code can be used to send a pop up message to all users who are logged on to the
    system.
    DATA: MESSAGE(128) VALUE 'Test message'.
    DATA: OPCODE TYPE X VALUE 2.
    DATA: BEGIN OF USR_TABL OCCURS 10.
    INCLUDE STRUCTURE UINFO.
    DATA: END OF USR_TABL.
    CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE
    ID 'TAB' FIELD USR_TABL-SYS.
    LOOP AT USR_TABL.
    CALL FUNCTION 'TH_POPUP'
    EXPORTING
    CLIENT = SY-MANDT
    USER = USR_TABL-BNAME
    MESSAGE = MESSAGE
    EXCEPTIONS
    USER_NOT_FOUND = 1.
    ENDLOOP.
    In the above code just pass the desired user ID instead of All user ID's
    Edited by: harsh bhalla on Mar 26, 2009 2:14 PM

  • Error message 'Please log on to the SAP system' when selecting 'shop'

    In SRM when we click on 'shop' or 'Goods Receipt' we get the error 'ITS System Information 'Please log on to the SAP System' where it prompts user to log on again. However when user logs on it opens up the same screen again saying please log on to the sap system.
    This only happens when we shop using the External ITS (wgate), EBP works fine using the Internal ITS.
    Please can someone help.
    Kindest Regards
    Paul

    Hi
    <b>Please try this -></b>
    <b>Look using SRM transaction SITSPMON and RZ20, RZ21.</b>
    Also Please check <u>SAP OSS Note 517860</u>
    <b>-> For ITS,  You need to maintain the RFC connection in the connection type "T" i.e TCP/IP. Maintain in the Table - TWPURLSVR.
    Ensure that you have maintained correct entries in the TWPURLSVR table using SM30 transaction for the ITS Web path (http or https address path). Note you are passing port - 8001 in the address here. Incase you face problems, Please ask you BASIS person to help you out.
    -> Please ask you BASIS person to help you out for maintaining ITS settings. (Ensure IACOR service is running properly - ITS server is running), through the transaction SMICM
    -> What all logs appear in SLG1 and SM21 transactions after publishing all the Internet services.
    -> If you are using ITS 6.2,you need to do the IACOR settings for SRM on the ITS server.Also in SE80 mainatin the Site for SRM system.After this ,you can publish all the ITS services usig the report,W3_PUBLISH SERVICES.</b>
    <u>Related links -></u>
    Integrated ITS :Login Problem
    Re: ITS_CANT_LOAD_INCLUDE in BBPstart service
    Re: ITS_DEST_NOT_FOUND
    Re: ITS Configuration
    Re: ITS Template not found
    Do let me know.
    Regards
    - Atul

  • Couldn't log into SAP System (message 00264) after SAP_BASIS update

    Hello,
    we performed SAP_BASIS update to SAPKB70023 and get a problem with logon into a SAP system with message 00264 (Status &2 of the user interface &1 missing).
    We have a 64-bit non-Unicode system on Solaris/SPARC/Oracle and Kernel level 333.
    We tried to import MENUSYST program from note 1285869, but nothing happened at all. The parameter abap/unicode_check we set to "on" but this didn't help us.
    So after selecting system record in SAP Logon now we get the initial logon screen with no "new password" button and error 00264 (Status 0020 of the user interface SAPMSYST missing.) and couldn't log into the system.
    We have no idea why correct and existing statuses are not working.
    Please suggest us what to do to fix this problem.
    Thanks in advance!

    Check this,
    http://forums.sdn.sap.com/thread.jspa?threadID=835278
    it may be useful.
    Regards,
    Ravi

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • Malicious or not? Message popped up: Mozilla security found (something like too much, forget exact word) activity on your computer so it will do a fast scan of system file. With OK button.

    I was looking at youtube.com, which always tells me my browser is not supported and recommends I download Firefox, but that is what I was using, so I went to Firefox to check for updates. (I think I also had freecycle.org open.) Then this message popped up in a new page: Mozilla security found (something like "too much", forget exact word) activity on your computer so it will do a fast scan of system file. There was an OK button. The page address was: http://update17.stegner.ce.ms/index.php?Q7Lhl9ShbRxGJXpkM1VLSi4ZE8H4pTedoVPySgeppM3VpC+thEspcFG7qxHgn1pdsC2h5ygPGWI3t5hXqMzL9EQaZZ3J1e3CKXgCb0Qp. I did not click OK but copied the link and closed the window which closed the internet. I have never seen this before and would like to know if it is really Mozilla or possibly something malicious. Thank you.

    Good catch. That almost certainly is an invitation to download malware.
    There are a lot of infected web sites pushing "fake antivirus" software. If you have any doubts about whether your system might have become infected, you can supplement your regular security software with these two highly regarded scanners:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/mbam.php
    SUPERAntiSpyware : http://www.superantispyware.com/

Maybe you are looking for

  • I-Pod Touch. I-Tunes has six purchased songs that do not show up on my I-Pod when I sync the two.

    I have six out of 83 purchased songs in I-Tunes that did not sync to my I-Pod Touch. 32 GB.  Why not?

  • Creator2: IDE dosn't start on my iMac

    iMac G5 Mac OS X 10.4.5 JVM 1.5.0 The installation was completed without any error message. After a double click on the application icon 'Creator.app' something happens I think, but I can't see anything. The IDE seems not to be started. Maybe the app

  • Root's password recovery

    After update I have lost my password. I tried to recover, with getting additional command to kernel - init=/bin/bash, but after this my keyboard.  does not working. any ideas about this?? Maybe I can recover password in another way?

  • DWMS - change management expiration date(SLED)

    Hi, I've activated change management for DWMS so delivery changes are sent via IDOC to the decentralized warehouse. It works except when I change SLED no change IDOC is created. In FM SHP_BAPI_DELIVERY_CHANGE_CHECK there is a check on the document ty

  • My iPod Touch Sporadically Connects and Disconnects.

    I've had my first generation iPod Touch for about 2 years now and it worked fine at first. Lately it's been doing this thing where it will stay connected for about 30 seconds and then with rapidly disconnect and re-connect. I've tried two different U