30-inch cinema display & Power Mac G4 Mirror Door

Does anyone know if it's possible to set up a Power Mac G4 to run a 30-inch aluminum cinema display? I have a G4 running a 22" apple display (clear enclosure) and want to purchase another desktop to run the 30-inch display without spending a fortune. I had it running on a G5 (June 2004) M9457LL/A but that just died, (logic board failure).
Philip

That monitor will work with a computer that has a DVI port, but you need this card to get a dual-link DVI port which is required to use it at its full capacity.
(42833)

Similar Messages

Can i use Apple 2005 20-inche cinema display on Mac pro ?

can i use Apple 2005 20-inche cinema display on Mac pro ?

If the display has a DVI connector it will plug into the Mac Pro directly. If it uses ADC (Apple Display Connector)
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
you will need a DVI to ADC adapter
<http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>

2nd Gen Ipod Shuffle is not recognized by Power Mac G4 Mirror Door

When I first bought my Shuffle and connected it to my G4 it worked flawless, i put my music on the shuffle and charged it . About 3 weeks later i went to put some new music on it and i plugged it into the dock (iTunes usually comes up automaticly and it shows that my shuffle is connected to the computer), this time it didnt open iTunes and the ipod icon didnt show up on the desktop, i tried taking it off the dock and unplugging it from the computer then plugging it back in and it still wasnt getting recognized. My ipod still plays music fine but when i connect it to my G4 it just blinks amber once and then thats it, nothing happens. Anyone else have similar problem? I cant figure it out.
Power Mac G4 Mirror Door Mac OS X (10.3.9) Power Mac G4 dual 1 GHz prossesors,1.5 GB of RAM, and 200 GB HD

When I first bought my Shuffle and connected it to my
G4 it worked flawless, i put my music on the shuffle
and charged it . About 3 weeks later i went to put
some new music on it and i plugged it into the dock
(iTunes usually comes up automaticly and it shows
that my shuffle is connected to the computer), this
time it didnt open iTunes and the ipod icon didnt
show up on the desktop, i tried taking it off the
dock and unplugging it from the computer then
plugging it back in and it still wasnt getting
recognized. My ipod still plays music fine but when i
connect it to my G4 it just blinks amber once and
then thats it, nothing happens. Anyone else have
similar problem? I cant figure it out.
Is the Shuffle dock connected to one of the REAR USB ports? What does Apple System Profiler say about the USB tree? Does it show the Shuffle?

Power Mac G4 Mirrored Doors Build 9L31a Shuts down vice sleeps

My Power Mac G4 Mirrored Doors Build 9L31a shuts down when put to sleep then is very difficult to restart. At first I can hear a clicking or ticking sound (like a clock) each time I press the start button, then after a few minutes I can hear the fans and HD trying to start. Total time of trying is 5-10 min before it will start. Also while making this post the computer shut down. It had been on for about an hour. I am running OS 10.5.8, 1 GHz PowerPC, 1 MB L3 cache, with 2 GB DDR SDRAM RAM. Please advise.

Hi Larry, and a warm welcome to the forums!
Does it have the same trouble if you click Restart?
Does it start fine if you choose Shutdown?
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Help I need a "power brick" for my 30-inch cinema display!!!!!

I recently moved and lost my "power suppy brick" for my 30-inch cinema display..How do I get another one?? The Applestore wanted my old one to do a even exchange?? But I can't do that...And they don't sell the product as a replacement. I'm stuck with a 2 month old display I can't even use! Any ideas???
Sony Vaio Windows XP

If the display is covered by AppleCare call 1(800)275-2273 and ask for a replacement power adapter. They will send the new unit first, and you are supposed to return the bad unit. You give them a credit card number when you order the part, so they can charge you, if for some reason they don't receive the old part.

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

I got a new Mac Pro and I am using my 30 inch cinema display. It has been flickering grey sometimes and then will stay grey and lock up my computer and I have to reboot... this is very annoying..help. I have reset the pram and that seems to help for a bit but then it starts up again...and please don't tell me to check for software updates:)

My 30-inch cinema display often doesn't come on at startup and I have to disconnect it and reconnect to work.

I have a 30-inch cinema display connected to a Mac Mini. When I first boot up the computer after having it shut down for a couple of days, the display screen does not illuminate about half the time. If I disconnect the display from the power brick and then reconnect it usually comes on, although sometimes I have to do that more than once. It works fine once it on and displaying. Anyone else seeing this?
Rocketman

Hi Rocky Rakoon,
Thank you for your post, and welcome to the Apple Support Communities.
I understand that your Apple Cinema Display is not turning on upon startup. I'd like to reset the following, as it may resolve your issue:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
You may also want to reset your computer's PRAM:
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH11243
Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
For more troubleshooting directly related to the Cinema Display, see this resource:
Apple Cinema Display: Troubleshooting steps
http://support.apple.com/kb/HT2810
Thanks,
Matt M.

Older 20-inch Cinema Display powering on and off repeatedly

I recently inherited an older (clear) 20-inch Cinema Display that I'm trying to use with my G5 dual 2.3 running 10.4.8. After purchasing the expensive DVI to ADC adapter and hooking it up, everything worked fine for about maybe 20 minutes or so until the display started to cycle on and off every two or three seconds (off for a couple seconds, then on for a couple seconds, repeat endlessly). This is accompanied by the power button glowing on and then off so it seems as if the power is cycling on and off by itself.
Any ideas? At first I suspected the ADC/DVI adapter which got really hot when in use, but letting it cool down had no effect on the monitor's behavior. My clunky old 19" CRT display works with no problems, so it's not the video card. The Cinema Display is my old monitor from work, and never had any performance issues, although it's been in storage for almost a year.
PowerMac G5 Dual 2.3 GHz Mac OS X (10.4.8)

Same thing is happening to me. I have the 20" Cinema Display (clear with ADC).
Last night I was in another room and all of a sudden I heard my G4 (Digital Audio) restart. I thought I was hearing things. Then about 3 minutes later I heard it again. I thought my daughter was up working on the computer or something. So I went up and there was no one around, but the computer kept restarting every 1 or two minutes. It was very strange – sometimes it it would go to sleep in the middle of the boot process.
I was able to stop this process eventually by disabling the display power button in the Energy Saver and Displays prefs panels. But I would like this feature to be functional since it makes my setup easier to use for my kids.

My 24 inch cinema display stopped working

My 24 inch cinema display just flickered and stopped working. The power is still there, the sound is still their. isight camera doesn't appear to be on, the screen is black. My display window in settings still reconginizes another display, but the screen is just black. I've tried all the normal trouble shootings, ie resetting the SMC, and PRAM, but no luck. I have never had any problems with it at all. Any help would be appreciated.

If restarting Mac and trying the suggestions in
LED Cinema Display (24-inch, Late 2008): Basic troubleshooting
don't help you, Contact Apple Displays Support.
Message was edited by: EZ Jim
Mac OSX 10.8.4

Random screen blackout 2009 24 inch Cinema Display... HELP.

Random screen blackouts with 24 inch Cinema Display (purchased 2009). Never used with anything but same Macbook Pro (2009). No hardware changes on MBP. Just started June 6, 2012. Super annoying. Anyone else having this issue? Recommendations?

Hello, Ertjie.
The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today. Click the "Download" link I post here or try the one in the kb article again. Perhaps it will work for you now?
However, I note that the kb article expressly states that this firmware update:
...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
If your Mac is really using Mac OS X (10.6.8) as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled. If so, contact Apple or your Apple-Authorized Service Provider for help.
Message was edited by: EZ Jim
Mac OSX 10.8.3

32 inch Cinema Display turns off repeatedly?

32 inch Cinema Display has taken to turning itself off afer 30 minutes operation.
Can this fault be repaired or should I be looking at buying a new display?

I have a 20" Cinema Display connected to an early 2008 MacPro. After years of service the monitor suddenly started going black, quite randomly. It would even happen part way through playing an edit from FCP. Strangely audio would be maintained though picture was lost. If I switched monitor power off and on again I would usually restore video image. Sometimes I had to do this power cycling repeatedly.
Looking through other posts it seemed a failure of the internal power unit was the most likely cause of the problem. But replacement seemed risky and not guaranteed. I considered buying a new monitor (probably a Dell UltraSharp since the Apple monitors are now so expensive).
Then I tried something else. In System Preferences and then Energy Saver I set the Computer Sleep slider to 25 minutes (I had always previously kept it on 15 minutes). Bingo! Problem solved.
Maybe this won't work for everyone but it certainly saved me some cash outlay. For now.

What happened to the 30 inch Cinema display?

What happened to the 30 inch Cinema display?
I went into the Apple store to purchase one, all they had was the (too small) 27 inch with the ugly black border.
I did find a few used 30 inch Cinema displays on ebay, they are over $1100 USED.
Any suggestions, for a 30 inch display?

No suggestions, apart from changing to a non-Apple display such as a LaCie one.
I think Apple really makes a mistake with the new displays - they are nifty, granted, if you want to watch TV or the like, but they'll loose the professionals, working all day long with their displays.
1. the new displays have an excellent resolution, no trouble there, but they are like mirrors, reflecting lamps, etc. and very tiring for the eyes. That's already a problem with my MacBook Pro but I've got to accept it - what else is there to do - and fortunately it's only my secondary system.
2. we have gotten used to 30" and do not want to downgrade.
I am a translator and need to work with technical plants and several open files, so 30" really helped facilitate work. And now that's all gone as the 27" display definitely is not up to scratch for day-long work...
I ordered a 30" display right when it became available, so it's quite old now. I worry what I'll do when it breaks down ...
Suzanne

MBP3.1 can't run 30-inch cinema display

I used my 30-inch Cinema Display on a G5 for quite awhile, but had to switch to my MacBook Pro when key apps like FC Pro required an Intel Mac. Since running it on my MBP 2.2 (Model A1226, introduced in 2007)/4 GB Ram/upgraded to 500GB drive I've had on-going problems with screen flickering, freezes and automatic rebooting.
I've had Apple replace the graphic display and the mother board twice, and the problem continues. Apple claims that the MBP can drive the display, but it doesn't look as if they're right. My laptop has none of the problems when disconnected from the display.
Has anyone else had this problem?

You don't say what connection adaptor you are using. See this Apple support post to see if it applies to you. http://support.apple.com/kb/HT3571

20 Inch Cinema Display Went Black

i just rebooted my mac mini that is connected to a 20 inch Cinema Display and the monitor never came back to life. The screen is totally black and the firewire, USB and video cables are plugged into the computer fine. When I look at the computer on Remote Desktop from my laptop i can see that the mac mini is fine. i can also see that when i hit the on/off button on the display that it prompts the shutdown/restart popup on the mac mini so it is communicating with the mac mini. i have also plugged the display into my PB and again I get the shutdown popup when i hit the display's on/off button. is there anything to do to bring it back to life or is it dead? its not even a year old.

Hey,
Same problem happening here, You described it exactly. Even the magenta box. Mine also happens most in the open windows, not when the desktop. I am trying to figure out when exactly it is happening. The third item I have issues with is that blocks of data are 'stuck' in a genie expansion like motion so it is blurred and dot displaying in that 3x3 inch square section. Could have something to do with refreshing? Sometimes I notice the window will fix if I manually resize the window.
Hope this helps any one who is trying to help us out.
J

Best performance dual 30 inch cinema displays dual x1900 card(s) ?

I am trying to get the maximum performance out of my system. I have a Mac Pro with two 30 inch cinema displays. I have them both connected to one X1900 card.
I use LightRoom as my photo work flow manager. I spread the library across both monitors as I sort thru photos.
Performance is good but sorting thru several thousand RAW files I need every bit of speed I can get.
Would I get better performance if I used two x1900 cards, one for each monitor? how about the 7300 or the FX4500? would those improve speed or better just for gaming?
thanks in advance for any help.

Two Quad-core with 8-16GB RAM, and your media fles on RAID.
I'd configure with 4 x 750GB WD RE2s. Can't easily swap or upgrade cpu so that is a given until you know and Apple has something that would make sense to buy/swap to newer faster systems (maybe in a year or next summer).
There is no support for two 16x lane slots. Maybe in the future but not now.
I doubt your performance is limited or factor of the twin 30s on the Radeon. It might. Try running with just one monitor for a few hours.

30-inch cinema display & Power Mac G4 Mirror Door

Similar Messages

Maybe you are looking for