300N Router/Adapter not working with Satellite internet

I had previously SRX200 router and it was working fine with Satellite but recently I bought again 300N router and adapter but it's not working. It give the strong signal for few seconds and drops it rightway. Please let me know if there is something I need to do with settings.
Thanks
Paul

Paul make sure that the firmware of this router is upgraded to the latest version 1.03.0, it resolves a lot of issue.

Similar Messages

  • WRT54G not working with Satellite internet

    Please help!
    I purchased the Linksys WRT54G a few months ago, set up my home network (laptop with wireless running XP, desktop hard wired to router running 2000, and desktop wireless running XP) everything worked great!
    I got the internet installed.  We ( the installer and I ) got the internet to work on my laptop, and he left, said the rest is up to me!  I did not think it would be to bad, but I am stuck!!
    My laptop no longer connects to the network! - I can ping the WRT54G but can not see any thing else.  I can connect to the internet only if I plug directly into my laptop, if I go into the Linksys it will not work from any computer!  My other two computers still see the network and can talk to one another but not to the laptop.  I can no longer print from the laptop (which I could do before) the printer is off of the 2000 destop, used to work great!
    I have tried some things that I seen here on the forms, "cloned the Mac address" "updated the firmware" and "power cycled" until I am blue in the face, but to no avail!
    Additional info - There is a Linksys 8 port 10/100 Switch placed after the Satellite modem, to connect some other hard wired pc's in the house.
    It goes Satellite modem - Switch - (some computers attached here) - Router - (rest of the PC's attach here).
    I hope you can understand my ramblings!
    Any help is greatly appreciated!
    Thanks  
    Message Edited by samsom on 06-17-200706:36 AM
    Message Edited by samsom on 06-17-200706:37 AM

    Satellite modem: LAN side set to 192.168.1.1 (assumed)
      dhcp enabled: range: 192.168.1.20-200
    Switch: if this is an intelligent switch set it to 192.168.1.2
      dhcp: disabled
    Router: set to 192.168.1.3
      dhcp: disabled
    If the satellite modem using a different base setting (ie. 192.168.222.1) you must adjust all other values(222) to match.
    samsom wrote:
    It goes Satellite modem - Switch - (some computers attached here) - Router - (rest of the PC's attach here).

  • StarTech Adapter not working with Dell Inspiron 15, model 3521

    Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
    Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521 
    I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
    I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
    It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
    I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model. 
    If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for! 
    Any thoughts?

    Hi,
    Thanks for your reply.
    This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

  • Why does my digital AV adapter not work with my iPad

    Why does my digital AV adapter not work with my iPad

    i was going to try it on a flat screen hdmi input, but just as i plug the apple digital av adapter in to my ipad it says "this accessory is not supported by ipad"... my itouch says the same thing... any ideas?

  • 3845 Router do not work with NME-X23ES-1GP Interface card

    Need help!
    I Trying install interface card NME-X 23ES-1GP on 3845 Router. I installed this card in slot 4, but router could not communicate with this card.
    IOS version in Router 12.3
    Here is results show diag command:
    Slot 4:
    Unknown (type 1187) Port adapter
    Port adapter is disabled deactivated
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    Hardware Revision : 1.0
    Top Assy. Part Number : 800-25011-01
    Board Revision : A0
    Deviation Number : 0-0
    Fab Version : 03
    PCB Serial Number : FOC090009VC
    RMA Test History : 00
    RMA Number : 0-0-0-0
    RMA History : 00
    Product (FRU) Number : NME-X-23ES-1G-P
    Version Identifier : V01
    Base MAC Address : 0013.8088.9f80
    MAC Address block size : 128
    EEPROM format version 4
    EEPROM contents (hex):
    Possibly IOS release too old?

    Thank you for link. I read all information on this link. But I can't solve the problem.
    Commands "show version" and "show flash:" show my the IOS image file version on Router (but not on interface modules). Here is Routers IOS image:
    c3845-advipservicesk9-mz.123-11.T5.bin
    I Can't connect to and open a session on the interface module. Command service-module interface slot/port session don't work.
    What I should do next?
    May is ncessarily upgrade Software on router?
    Here is results show version and show flash:
    BIG1#show flash:
    -#- --length-- -----date/time------ path
    1 29801400 Jun 28 2005 04:47:46 +00:00 c3845-advipservicesk9-mz.123-11.T5.bin
    2 1651 Jun 28 2005 04:55:18 +00:00 sdmconfig-38xx.cfg
    3 3085312 Jun 28 2005 04:55:40 +00:00 sdm.tar
    4 763392 Jun 28 2005 04:55:56 +00:00 es.tar
    5 820224 Jun 28 2005 04:56:10 +00:00 common.tar
    6 1038 Jun 28 2005 04:56:24 +00:00 home.shtml
    7 113152 Jun 28 2005 04:56:36 +00:00 home.tar
    8 749101 Jun 28 2005 04:56:52 +00:00 256MB.sdf
    9 1208320 Jun 28 2005 04:57:08 +00:00 ips.tar
    27451392 bytes available (36560896 bytes used)
    BIG1#show version
    Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version 12.3(11)T5, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Sat 02-Apr-05 15:14 by yiyan
    ROM: System Bootstrap, Version 12.3(11r)T2, RELEASE SOFTWARE (fc1)
    BIG1 uptime is 57 minutes
    System returned to ROM by reload at 07:11:45 UTC Tue Jul 12 2005
    System image file is "flash:c3845-advipservicesk9-mz.123-11.T5.bin"
    Cisco 3845 (revision 1.0) with 223232K/38912K bytes of memory.
    Processor board ID FCZ0927714C
    2 Gigabit Ethernet interfaces
    1 Virtual Private Network (VPN) Module
    4 Voice FXS interfaces
    DRAM configuration is 64 bits wide with parity enabled.
    479K bytes of NVRAM.
    62720K bytes of ATA System CompactFlash (Read/Write)
    Configuration register is 0x2102

  • Av adapter not working with ipad 2, please advice

    I bought an av adapter 2012 release, is not working with my ipad 3g att ios version 4.3.5 i tried reset, changing the widescreen button multiple times no luck no video mirroring or sound. When i plug there is a msg displayed: accessory not supported.
    I have 2 questions :
    1) is this a ios version ? There a lot people complaining that after updates the adapter stopped working, if it is is this version w abug?
    2) can i update the ios to 5.x not the ios 6 or i m forced to update to the last version ?

    See the following where it states the requirement of iOS 5.1 or later (in the features box)
    http://support.apple.com/kb/HT4108?viewlocale=en_US
    And yes, you should be able to update to iOS 5.1 without going directly to iOS 6. You need to locate the correct .ipsw update file for your iPad 2 and manually install it through iTunes. Google "ios ipsw 5.1.1" for links to the iOS 5.1.1 files.

  • Mini dvi to dvi adapter not working with monitor

    arright *** i got a mini dvi to dvi adapter which is connected to my vga monitor through a vga to dvi adapter. The computer recognizes the monitor in display preferences, but the monitor doesn't display anything it just sits in standby mode... any ideas why this isn't working? You'd think if the problem was going from vga-vga to dvi adapter-dvi to mini dvi adapter that it wouldn't even recognize the monitor but it does.
    well that *****, back to best buy to get the other one. Reason i got the dvi one is because i plan on getting a different monitor with dvi soon. But noo dvi adapter wont work with vga adapters.
    Message was edited by: Veiss

    The mini-DVD to DVI adapter doesn't pass through the analog video signals needed for VGA, so won't work with a DVI to VGA adapter. All the control signals are there, so the display is recognized, but there will be no picture.
    They could have used a DVI-D connector on the adapter, instead of DVD-I, so the DVI to VGA adapter wouldn't even plug in, but then it couldn't be used with some non-Apple LCDs, that use DVD-I connecters.

  • Linksys gaming adapter not working with Airport Extreme

    Hey guys, just installed Airport Extreme 802.11n for my new MBP notebook and I have 3 laptops Apple and PC that work great! BUT! I have an Xbox with Linksys gaming adapter and the gaming adapter is not picking up the airport at all! Before the Airport I had a Linksys wireless router and it has worked with the gaming adapter for the last 3 years flawlessly. Does anybody know why the gaming adapter is not finding it?

    Hey guys, just installed Airport Extreme 802.11n for my new MBP notebook and I have 3 laptops Apple and PC that work great! BUT! I have an Xbox with Linksys gaming adapter and the gaming adapter is not picking up the airport at all! Before the Airport I had a Linksys wireless router and it has worked with the gaming adapter for the last 3 years flawlessly. Does anybody know why the gaming adapter is not finding it?

  • Lightning HDMI Adapter not working with iOS 6.1.2

    I have an iPhone 5 which was updated from 6.0.2 to 6.1.2 recently and the Lightning HDMI adapter stopped working altogether for video mirroring; was wondering if anyone has the same situation/any solution for this?
    I also have an iPad retina generation which is at 6.1.2, and the Lightning HDMI adapter is not working for it as well.
    I've tried replacing HDMI cables, rebooting the iPhone with the cable plugged in, and plugging out/in several times with the charger in/out. The adapter works, cause when I plug it in; I see the top bar flash for a bit... but no dice on the video mirroring to my TV.

    I also have this problem and am very unhappy with the way Apple is handling it. Called today to enquire on when the fix will be available and was told it is a software issue that could be fixed if we paid $35.00 to talked through process on the phone. Highly disappointed with Apple, why should it cost me money for them to fix there own issue. Since they are aware of the issue the least they can do it posted the information for the fix online @ no charge.
    If I wanted crap service I could have gotten a phone from anyone. Reconsidering purchasing a 5 on next upgrade.

  • Thunderbolt to VGA Adapter not working with SMART board all of a sudden?

    I was wondering if anyone had any suggestions on getting my classroom's (I'm student teaching) SMART board connected to my macbook pro (13 in).  Two days ago I tested the setup I had, Mini-DVI to VGA adapter, Mac OS X SMART software suite and it worked flawlessly.  Today I try the setup and although the SMART board recognizes my macbook via usb, the projector does not display anything.  System preferences does not even recognize the projector as an external monitor.  When I plug in my Mini-DVI to VGA adapter (already attached to the VGA cord from the SB) the screen flashes black and goes back to normal.  Official work from SMART technologies is there is no supported adapters for connecting a macbook to a SB but I have seen numerous threads about this setup working and like I said it was previously working fine. Any suggestions on what to try next? I was thinking of dual booting to an older version of OS X. Thanks.
    Specs:
    MacBook Pro 13 in
    2.4 GHz Intel Core 2 Duo
    4 GB 1067 MHz DDR3
    10.9.1

    If your laptop is not connected to power (i.e., plugged in to a wall), try plugging it in.  It is not uncommon for a laptop to send the VGA signal out with less power when it is on battery power.  I've seen this fix this problem, at least, dozens of times.
    Try connecting the VGA cable to your adapter while the smart board display is on THEN plug the adapter in to your computer.
    Also, try connecting the VGA+Adapter to your mac before booting it (or connect the macbook to the vga cable and then reboot the macbook).  I've seen this work with macbooks using vga on projectors (or other external displays running through longer cables or crestron/extron/whatever switching equipment) many many times too.
    If these fail, get your campus AV (or IT) people involved.  We have often found that a damaged cable or long run needing amplification will work with some computers but not with others.  It could be that the cable running from the smart board is somewhat sketchy.
    Also, have you attempted to connect your macbook to any other display since starting to have the issue?  A bad dongle (dp to vga adapter) isn't rare.  I have a bad one sitting on my desk at this very moment.
    One last thing you can try, this works for some:
    Shut of the mac
    Connect it to the smart board (i.e, connect the cables)
    Turn on the mac and then close the lid
    This *may* boot the computer on the external dispaly (smart board)
    Open the lid before it comes to the login screen.
    Hopefully one of these suggestions helps.

  • Rocketfish adapter not working with MacBook Pro 13 inch

    I have a rocketfish HDMI to mini displayport adapter. I have tried to connect it to a 22 inch monitor and a 50 inch TV as an extended monitor but the MacBook does not recognize the extended display.
    Any ideas on how to resolve or is the adapter not supported?

    Check this post if you want more info:
    http://discussions.apple.com/thread.jspa?threadID=2774718
    The gist is that DVI is currently very iffy through Thunderbolt. Mini display -> mini display OR mini display -> HDMI should work fine. It's most likely not your adapter itself but the fact that it's DVI.
    If you can, get a mini display -> HDMI adapter and try that (assuming your external has HDMI).
    I should hear back tomorrow or Monday from apple engineers with more specific info about this issue and I will update then.
    BTW- DVI anywhere in the chain will make things fail. Mini Display -> DVI and a DVI/HDMI cable won't work with any reliability (I've tested it on three completely different monitors).

  • External subwoofer not working with Satellite C55t-A5222

    When I plug in an external speaker system into my laptop, the speakers work, but the subwoofer does not. I have tried two different speaker systems and have the same problem. I know the subwoofer works, because when I connect an ipod or iphone to the speakers through bluetooth, the sound is great. How can I get the same sound when the speakers are connected directly to my Satellite C55t-A5222 laptop? I have verified that I have the latest driver for my sound.

    I was having the same problem, so I called Customer Service. The Tech diagnosed the problem with the Realtek HD Audio Manager. I had upgraded to Windows 8.1 from 8.0 so some of the drivers and devices my not have installed correctly, he guessed.
    He went Control Panel > Hardware and Sound
    Under Devices and Printers he selected Device Manager>Sound, video and game conroller>
    He seleced Realtek High Definition Audio
    He went to the Driver Tab and selected 'Uninstall"
    He uninstalled the Realtek Device and rebooted my laptop.
    After the Reboot, he went back to Control Panel>Hardware and Sound  and went all the way at the bottom selected "Realtek HD  Audio Manager. I don't recall if it was there before, but I assumed it wasn't since he was not able to find it previously.
    The then opened up the Realtek HD Audio Manager and selected  DTS Tab and clicked the 'Launch' Button. He then selected 'External Speakers and 'Viola' My External Cyber Acoustics CA-3602 2.1 Speakers including the Sub Woofer were 'shaking' my office again!  YEAH!!
    He said that each time I want to use the External Speakers and Headset I might have to select it in the Realteck HD Audio Manager if it is not working!    THANKS "SAM" (my Toshiba Tech Guy's psuedonym)
    Hope this helps you guys

  • Password Manager not working with any internet browsers

    I have Thinkvantage password manager installed (v. 3.20.0311.00) on my Thinkpad X201. I am running Windows 7 professional, 64 bit. Password Manager works for all programs except IE8 or Mozilla Firefox (eg. works for Outlook, works for iTunes, etc.). When browsing, the program simply never pops up. It worked previously, and I still have many saved website login details, but it never logs in for me any more and new sites do not activate the program.
    I have made sure that the add-on is enabled and I have checked the box next to "enable 3rd party browser extensions" in the advanced tab of internet options. I have also tried resetting internet explorer settings. As mentioned above, this in not only a problem with IE8; it also occurs with Firefox.
    Any help would be very much appreciated.
    Dr_Rap

    Same problem here. I just recieved mine (Win 7 pro 64 bit, X201 Multitouch) last week and password manager not working at all in ANY web browser. It recorded my .net password just fine, but i can't get it to work in IE8. Who pays this kind of money for something that doesnt work?
    Fix this Lenovo!

  • SAP PI FTP sender adapter not working with SAP ECC over Itanium

    Hi,
    We have been running normally SAP PI 7.0 SP14 with no issue for a while.
    We are now in the process of migrate the SAP ECC system from PA risc to IA platform. We are performing some tests between SAP PI and SAP ECC to check that the platform migration is not affecting us in any way and we have found that FTP adapter sender is not working anymore (receiver is working as usual).
    We place some files in the new ECC system and when PI goes to retreive the files it is like it can not read anything. It gives no error but it does not pick any file. This is not happening with the old platform.
    Does anyone have any idea?
    Thanks a lot for your help
    Diana

    Hi,
    I am using FTP connection and for the receiver it is working fine.
    Thanks
    Diana

  • Old MagSafe Airline Adapter not working with MacBook Pro Retina

    I've got an old MagSafe Airline Adapter (one I bought when it first came out) that I'm trying to use with my MacBook Pro Retina (using a MagSafe to MagSafe 2 Converter). Sometimes the light is green, sometimes it is off, sometimes the battery icon in the menu bar shows plugged in, sometimes not, but in any combination, the machine is not maintaining charge; the battery discharges at a normal rate for just being on battery. For giggles, I borrowed my seatmate's year-or-two-old MagSafe adapter (the one with the right-angle plug) and plugged it into my machine (also using the MagSafe to MagSafe 2 converter). The light on that one turns orange, and though the battery icon shows "Not Charging", the battery is maintaining charge with the newer adapter. (My adapter, BTW, is able to maintain the charge on her 13" MacBook Pro.)
    Was there a change to recent versions of this adapter to make the new ones work with the Retina MacBooks where the old one will not?

    the green light on the mag safe turns on?
    you should reduce your usage to a very minimal amount as I'm sure the airline doesn't output a strong enough signal for you to be running full screen films with high res. Maybe you should close your macbook P and see if it is charged after a little while of not using it.
    turn your screen lights down, turn the sound gHZ down, quit all the downloadin'.
    if you must run flash make sure you have the latest version (from the adobe site).
    You're computer is intense and if you use it more then it's gaining, of course it going to be draining .
    But this is probably moot since you're probably on said plane now. or was.
    I'd imagine if you're not satisfied with the product you should return it detailing your situation.

Maybe you are looking for

  • How to Install OS X To New HDD?

    Hi, I just bought a new SATA 500GB Seagate HDD and want to replace my current primary HDD, which is the default HDD for Mac Pro. But how am i going to install an OS X into a blank HDD? I need a step by step instruction which could direct me how. Is i

  • Can I use the iMac monitor to watch TV?

    Am I able to connect the cable to the iMAC monitor so I may watch TV?

  • Macbook Connected To Playstation 3

    Is there any way to set my Macbook and my Playstation 3 upp threw bluetooth or anyhting. Want I want it to do is share music and such. Please help if you can in anyway. I try to pair them together and they never find eachother

  • Database not available

    Hi, I am getting the error message while starting startsap. Could you please provide the solution how it can be fixed. My of OS is Solaris. sapcebiw:BIPadm 5% cat /home/BIPadm/startdb.log Tue May 1 00:39:40 IST 2007 LOGFILE FOR STARTING ORACLE Trying

  • Can't create Open Directory domain

    Using Server 3 I can't get Open Directory to work. I keep getting an error "xxx was successfully configured as a directory server, but an error occurred." Any ideas as to what's going on?  I checked my DNS settings and they seem fine.