30EA3 - Data filter entry problem

When I am browsing a table, on the data tab, and using a filter, sometimes the visible filter does not seem to be used.
If I clear the filter text, and press the refresh button, the old filter is still used.
If I enter a filter and press the refresh button, the new filter does not get used.
It seems like an on-leave window event is not happening when I leave the filter entry field.
it does not seem to make a difference if I am using the Oracle or Windows look-and-feel selection.

You have to press the "Enter" key for the changes in filter text field to take effect.
-Raghu

Similar Messages

IDOC: Problem with data filter for IDOC extension field

Hallo!
I've created an idoc extension for the basic type DEBMAS06 that works fine. Now I want to use a data filter for one field ( company code ) of my segment. Every segment with a company code different from 100 should be filtered and not send to the other client. But what happend is that for all customers that have at least one company code different from 100, all segments including the one with cc 100 were deleted and a error "Segment ... does not exist for message type DEBMAS" appeared on the screen.
Does anyone have any ideas about this problem?

Not sure about changes to be made at the filtering options.
An alternative would be sending the data to XI as it is and perform the mapping to remove the unnecessary segments.
Disadvantage: Unnecessary processing of segment would be done at XI.
Advantage: The integration logic would be completely handled by XI.
Regards,
Prateek

How to create a data filter for BAPI used in a Distribution Model ?

I am trying to create IDOC's for a QM inspection plan via message type QPMK in ECC 6.0. When creating the new message type in the Distribution Model, it forced me to use a BAPI (MasterInspectionChar) rather that just the message as I have done in the past. In order to ensure that only IDOC's related to a specific plant and material type get sent out, I was trying to create a filter.
I am able to get into a 'Change Filter' dialog by double clicking 'No data filter set' under the node 'MasterInspectionChar.SaveReplica'. However, an attempt to highlight anything on this dialog and clicking button 'Create filter group' results in msg. 'Select node: Content-dependent parameter filtering'.
Online help led me in a different direction, one thread led me to believe I needed to create a table entry for the filter in table TBD16 via BD81 for later attachment to the BAPI in the Distribution Model. Before this, I created two Z* ALE Object Type records for plant and material type in table TBD11 via BD95 for what I thought would provide a lookup back in BD81 for creation of a new filter record, but these objects are not found. Per the help, I am also unclear as to whether I would need to set up Receiver determination or Parameter filtering, nor where to make this step in the configuration happen?
Can anyone point me back in the correct direction to get a data filter set up for this BAPI within the Distribution Model ?
Thanks - Mike

Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'. But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter.
I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'. Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI. Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning. Is this warning occuring because of missing configuration?
Thanks - Mike

SP2013 - Date Filter Web Part looses connection when used in a site template

Hi,
I created two table reports in SQL Reporting Services 2012 and inserted in a web page using the Reporting Service Report viewer in SharePoint 2013 with CU Dez 2013. The two reports require two dates and I use two date filter web parts (I did not try the
date range solution I saw in the fórum).
So the user inputs the two dates in date filters that send the information to thereports in the same page.
They work in the site and I saved it as template. However when I create e new site using it as a templates, the date filter connections are broken and of course, they did not work.
For another report where I usea text filter, it worked without any problem in the template.
Does anybody know any workaround?
Thank you.
Best regards, Ricardo Segawa - Segawas Projetos / Microsoft Partner

Hi ,
The new site based on the saved site template will generate new ID for date filter web part, in the web part page the SPWebPartConnection "ProviderID" value seems still to reference the original date filter web part ID (see from
SharePoint Designer), as a workaround we can re-configure the web part connection from the web part page manually or programmatically from that new site web part page.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8d98206d-b41f-4ee4-b537-a4bf5cec0434/sharepoint-2010-save-site-as-template-webpart-connections-broken?forum=sharepointgeneralprevious
http://sympmarc.com/2007/09/20/removing-a-web-part-connection-in-sharepoint/
Thank
Daniel Yang
TechNet Community Support

Data Filter in Data Selection -DM

Hi ALL,
I am facing problem in loading blank value data to BPC. Scenarion is
Account In BI has Hier as ACT_1
                                          ACT_2
                                         ACT_3
                                         ACT_4
                                         UNassigned - In data base it has balnk and when you report in BI you can see as #-(Un assigned as a text descrption)
in my data manager i need to select the or filter the accounts by Hier as shown above
i can select as ACT_1, ACT_4 but i need to select the blank value also i need to set the filters for unasigned but BPC data manager package will not allow the UNASSIGNED Value to be select.
Any idea on this can i handle some ho in transformation,
Thanks in advance
Regards
Ram

Hi,
Based on my test, Data filter does not lost when we re-open the file in Excel 2013. Thus, I think it is not a bug. Thus, please provide us more information to assist you better.
Did this issue occur with the previous file that created with Office 2010?
Have you tried to re-create a new file to test?
If this issue occur only with the previous file that created with Office 2010, this issue might be caused by the file compatibility, pleases use compatibility checker to update the files:
https://support.office.com/en-ca/article/Check-file-compatibility-with-earlier-versions-d9856881-5875-4c58-915f-06859b2943a7
If this issue occur with all files even with a new file, please try to repair Office 2013.
Hope it's helpful.
Thanks
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

BO Report Mobile - date filter

Hello!
I have a report in BO Mobile developed with web intelligence tool with two fields of sales values, one daily and one monthly. I'm having the following problem: when I select a specific date to the monthly values are equal to the daily values.
Could someone help me.
It is possible to apply the date filter, make the monthly accumulated values remain?
Sincerely.
Gleziane

Hi
At Universe level you can create two measure values like daily sales and MTD monthly sales =@
suppose say yu run the query on date 19-5-2014
for First measure daily sales where date =@prompt value (i.e date prompt)
for 2nd measure Monthly sales where date<=@prompt value AND Month=month(@prompt )
the above is for MTD
Hope this helps u
Thanks & Regards
Sunil

Date Filter uses unknown property by default, doesnt work

Created a filterable and sortable table by dragging and dropping in VO from a AM. While it automatically sets the appropriate properties for filtering, and for non-date fields it works fine, for dates always "no row are found," even if I specifically choose a valid date where rows should return.
I noticed in the property inspector, the inputdate value in the column's facet filter is set to an invalid value (by default when dragged and dropped!). In the property inspector, the value is outlined in orange (value=#{vs.filterCriteria.trSentOnDate}, populated by default), and the tooltip states "filterCriteria is an unknown property."
Here's a snippet of the table def
        <af:table value="#{bindings.RequisitionsAllVO11.collectionModel}"
                        var="row"
                        rows="#{bindings.RequisitionsAllVO11.rangeSize}"
                        emptyText="#{bindings.RequisitionsAllVO11.viewable ? 'No data to display.' : 'Access Denied.'}"
                        fetchSize="#{bindings.RequisitionsAllVO11.rangeSize}"
                        rowBandingInterval="0"
                        filterModel="#{bindings.PoRequisitionHeadersAllVO1Query.queryDescriptor}"
                        queryListener="#{bindings.PoRequisitionHeadersAllVO1Query.processQuery}"
                        filterVisible="true" varStatus="vs"
                        selectedRowKeys="#{bindings.RequisitionsAllVO11.collectionModel.selectedRow}"
                        selectionListener="#{bindings.RequisitionsAllVO11.collectionModel.makeCurrent}"
                        rowSelection="single"
                        binding="#{backingBeanScope.backing_browseReqsPOs.t3}"
                        id="t3">
                <af:column sortProperty="SentOnDate" filterable="true"
                           sortable="true"
                           headerText="#{bindings.RequisitionsAllVO11.hints.SentOnDate.label}"
                           id="c26">
                  <f:facet name="filter">
                    <af:inputDate value="#{vs.filterCriteria.SentOnDate}"
                                  id="id2"/>
                  </f:facet>
                  <af:outputText value="#{row.SentOnDate}" id="ot20">
                    <af:convertDateTime pattern="#{bindings.RequisitionsAllVO11.hints.SentOnDate.format}"/>
                  </af:outputText>
                </af:column>BTW, I looked at the ADF RC Demos, and I noticed that for the filterable table demos, the date filter isn't enabled.

We're getting there.
New error now. I neglected to set the attribute Format and Format Type. I set those in the VO (Simple Date and MM/dd/yyyy, respectively), and now I get a nullPointerException.
I hit enter after entering a date, and a popup shows the following:
java.lang.NullPointerException
For more information, please see the server's error log for an entry beginning with: Server Exception during PPR, #2with the following in the DefaultServer log
Aug 13, 2009 11:14:35 AM oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator handleError
SEVERE: Server Exception during PPR, #2
javax.servlet.ServletException
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
...

Date filter is coming in physical query

Hi,
I have following problem,please help me.
1.My OBI in connecting Vertica Database through ODBC 3.5.
2.It's working fine for all report and if I give date filter condition then in physical query ,which is sending by OBI to Vertica doesn't have date filter condition:
Ex: I have Call Type,and Date as dimension table and Call Mesures as fact table
when I am selecting in answer select Call type name,measure1 for a particula Call type='Dropped'
Physical Query generated by OBI as
Select Call type name,mesure 1 from call_type_dim a,call_measures b where a.call_type_key=b.call_type_key and call_type_name='Dropped'
But when I am loking for particular calandar date(for 07/27/2009:
it's generating following query:
Select Call type name,mesure 1 from call_type_dim a,call_measures b,date c where a.call_type_key=b.call_type_key and call_type_name='Dropped' and c.calandar_date_key=b.calandar_date_key
But in logical query it's showing calandar_date='07/27/2009'
I am expecting OBI should generate query:
Select Call type name,mesure 1 from call_type_dim a,call_measures b,date c where a.call_type_key=b.call_type_key and call_type_name='Dropped' and c.calandar_date_key=b.calandar_date_key and c.calandar_date='07/27/2009'
Where I have done wrong ,please help for Oracle DB i.e OCI 10g ,it's generating correct physical query

Check cache settings.
prefix this in prompt
set variable disable_cache_hit=1;
btw: Did you get a chance to look at https://forums.oracle.com/thread/2594287

Table date filter not working properly

Hi OTN,
I have noticed that table date filter not always working properly.
When I copy actual value from column outputText to column filter and hit Enter - I see an empty table.
http://imageshack.us/photo/my-images/818/filter.png/
I suspect the problem to lie among date formats.
But I tried to delete convertDateTime from outputText or add it under filter inputDate. Nothing helped.
<af:column sortProperty="Hisdate" sortable="true"
                                 headerText="#{bindings.InformationView1.hints.Hisdate.label}"
                                 id="c8" visible="false" filterable="true"
                                 width="83">
                        <af:outputText value="#{row.Hisdate}" id="ot5">
                          <af:convertDateTime pattern="#{bindings.InformationView1.hints.Hisdate.format}"/> // or without both lines
                        </af:outputText>
                        <f:facet name="filter">
                          <af:inputDate id="id15"
                                        value="#{vs.filterCriteria.Hisdate}"
                                        columns="8">
                            <af:convertDateTime pattern="#{bindings.InformationView1.hints.Hisdate.format}"/> // or without both lines
                          </af:inputDate>
                        </f:facet>
                      </af:column>Nothing special about the attribute. A database table field of type DATE. In database this (see picture) row has exactly "06.06.2006".
Could you please point me out where to start seeking?
Thanks.
JDev 11.1.1.4

Well, OK. I think I'd better have 2 attributes: truncated date for filter and full date with time for edit.
What is an attribute type for datetime?
select trunc(t.HISDATE) AS HISDATE -- date attribute type
    ,to_char(t.HISDATE, 'dd.mm.yyyy hh24:mi') AS HISDATETIME -- timestamp/date attribute type?Something like this?

Date filter in preview

Hi there,
Can anyone help me to see the error of my ways with date filters when using Preview and Designer to create reports.
If I create a Excel 2013 workbook with date filter on Power View they appear as they do in Excel and the current version of Power BI (O365 Add on)... see first Pic below.
If I use the Power BI Designer, or create a Report in the Preview the only filter 'structure' applied to dates is the checkbox structure for each date, and it's not functional either as the list of dates only shows approximately 30 instead of each day for
the last 5 years (which is the content of the data)... see second pic below
I was expecting any date filters to show as per the first Pic in all cases.
Is this just a bug??
Expected to see (uploaded Excel 2013 Workbook):-
but we see this (using the same model from the uploaded workbook):
The Power Query has the column 'added' defined as a date.
Thanks,
Tim
Thank you for you time folks!

Hi Bruno, thanks for the reply to the post.
The issue here is the way in which the UI works with this amount of data. So there are 1600 dates I'm the model and the UI only shows a small list of the dates. And you can't change the filter 'type' to allow rhea selection for a range of dates
like you can in the Excel 2013 Power View. This is odd because when you upload the Excel created Power View the functionality exists in the Power BI UI.
The issue is when using a date as a filter you can't appear to select the type of filter to allow the entry of a date range. This just appears odd, or a bug?? i'm going to use the good old date dimension table to allow the selection but most end users
of Power BI won't have rhe knowledge or the skills to build star or snow flakes... therefore this seriously restricts functionality in my view...
Hope MS resolves soon...
Thanks again. tim
Thank you for you time folks!

Where Is Table That Contains DTP Filter Entries?

Hi,
I am trying to find the table where my "Filter" entries for a DTP are contained. I would like to use these entries in my start routine. In the old 3.5, the table was RSSELDONE, but I can't seem to find the NW04S version of this table.
Thanks for your help.

P-Dub:
To date I have not found a table that specifically contains the DTP filter entries. If you are looking for a way to access this information from a transformation though, you may reference following logic:
create an internal table (itab) of type RSBK_S_RANGE in the local portion of a start routine.
fill the internal table (itab) as follows:
itab[] = p_r_request->GET_TH_RANGE( ).
The selection criteria of the DTP will then be available within your transformation in the internal table itab.
All DTP attributes at run time can be accessed in this way. For a list of the methods available, look at the interface if_rsbk_request_admintab_view, know as p_r_request in the start routine.
==============Start Routine CODE Example - BEGIN==============
      Method start_routine
      Calculation of source package via start routine
<-> source package
METHOD start_routine.
*=== Segments ===
    FIELD-SYMBOLS:
      <SOURCE_FIELDS>    TYPE tys_SC_1.
    DATA:
      MONITOR_REC     TYPE rstmonitor.
$$ begin of routine - insert your code only below this line        -
... "insert your code here
DATA: i_dtpfilter type standard table of RSBK_S_RANGE
       initial size 0.
break CONTDG.
i_dtpfilter[] = p_r_request->GET_TH_RANGE( ).
==============Start Routine CODE Example - END=================
Good luck,
The Dude

Data Filter issue with

Hi,
We have created a document from an Essbase ASO cube.
A data filter have been created in Essbase ASO Cube. The data filter is 'all Europe Region'. When this data filter is applied to the user and user logs in WA and accesses the document, the below error is produced.
========================================================
Loading this document produced errors.
Unknown members or dimensions have been removed from the document in an attempt to fix the problem.
Saving this document now will prevent these errors when the document is loaded again.
[1033] Native: 1001005 [Fri Mar 06 16:59:20 2009]uxsy9dbt.cos.agilent.com/vip_main/vip_main//Error(1001005) Unknown Member [Americas] in Report
==============================================
With no data filter assigned to the user, the report is fine...
Tested the same data filter in Excel-addin and there are no issues/error. Is there any setting that needs to be changed in WebAnalysis?

Following up even thought his is an old issue. Out of the blue my users began complaining their security in Web Analysis had gone awry. Their security in Excel add-in was fine though.
Most users use a WA Shared Preferences File here. However one user, unbeknownst to me, was able to hard code their userID/password in the "database" connection for the Shared Preference. So anytime another user logged in to Web Analysis, if you open the View Pane to see all the details, the Database user was John Doe - which was wrong, but the WebAnalysis user was John Smith - which was correct. The John Doe user like I said somehow managed to "save" his userID/pwd as the default, which caused all other users to "pass through" to Essbase as John Doe instead of as themselves, which means they were getting HIS filter not their own.
I wasn't able to figure out how he did that but to fix it I deleted his profile then Edited the Shared Preferences File | Databases tab | highlight database in question and choose Edit | change "Default logon" back to "Use User's ID and Password" instead of "Enter User ID and Password...John Doe|Pwd".
It works fine now. Users get their same, correct security filters applied whether they go in to Web Analysis or Excel add-in. (In Web Analysis we have it set up to open a report at a certain location depending on their security filters, so this was causing us quite a headache until we figured out what the problem was).
I opened a case with Tech Support to try and shed light on how the user was able to hard-code their login credentials in to the Shared Preference. Everyone only has Read access to that file, so. ?
HTH,
Karen S.

Date Filter Error

Hi,
I create a report (columnar) with date filter, but when i try use the filter this error ocurrs:
ADC Server exception in OpenViewset().
ADC Server exception in OpenViewset(). [ErrorSource="ActiveDataCache", ErrorID="ADCServerException"] ERROR [42000] [Microsoft][ODBC driver for Oracle][Oracle]ORA-00911: invalid character [ErrorSource="msorcl32.dll"]
The filter is "FIELD_DT is greater than 10/1/2009 12:00:00 AM".
The DO is vinculated a External Data Source, and the field used is datetime type.
I use BAM 10.1.3.3.0.
Please, help-me.

Hi,
It is difficult to say from error message whether the problem is due to filter or some other condition in the report. If you suspect it is filter, can you please create a simple Updating Ordered List on the dataobject you are using to see if works and when you find it working, add the exact filter on it and then we would know if filter has issues?
Thanks,
Vishal

Top Count in SmartView Data Filter

I'm trying to do a Top Count data filter in SmartView. I can get it to work in MDX no problem but I get the following error when I do it in SmartView:
"Cannot query members by name. Analytic Server Error(1007116): No dimension is tagged as Time dimension for virtual time series."
Do I have to have a dimension tagged as Time in order to use this function in SmartView?
Thanks,
Tim

You can try this code:
USE tempdb
GO
CREATE TABLE dbo.Car
(CarMake NVARCHAR(100),
CarModel NVARCHAR(20),
RedColorCount INT,
BalckColorCount INT ) ;
GO
INSERT dbo.Car
VALUES
( N'Maruti' , N'VXI' , 10 , 25 ),
( N'Maruti' , N'LXI' , 50 , 45 ),
( N'Maruti' , N'ZXI ' , 17 , 28 ),
( N'Maruti' , N'VDI' , 18 , 8 ),
( N'Maruti' , N'ZDI' , 25, 96 );
GO
CREATE FUNCTION dbo.GetTopCar( @NRows INT )
RETURNS TABLE AS RETURN
SELECT
CarMake ,
CarModel ,
RedColorCount ,
BalckColorCount
FROM dbo.Car
ORDER BY RedColorCount DESC
OFFSET 0 ROW FETCH NEXT @NRows ROW ONLY
GO
SELECT *
FROM dbo.GetTopCar(3);
SELECT *
FROM dbo.GetTopCar(5);
DROP TABLE dbo.Car ;
GO
Cheers,
Saeid Hasani
Database Consultant
Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
[My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
[Twitter] [Facebook] [Email]

SAP Crystal Reports data source connection problem using sap business one

Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.

Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.

30EA3 - Data filter entry problem

Similar Messages

Maybe you are looking for