32bit Oracle 10g on Red Hat 64bit?

Hi guys,
Is it possible to install 32bit Oracle 10g on Red Hat 64bit? Im trying to do so on our Red Hat database server and i receive :
Error in invoking target 'client_sharedlib' of makefile '/db/oracle/10.201/network/lib/ins_net_client.mk. See '/db/oraInventory/logs/installActions2011-02-11_01-01-54-07AM.log' for details.

rootsman wrote:
Hi guys,
Is it possible to install 32bit Oracle 10g on Red Hat 64bit? Im trying to do so on our Red Hat database server and i receive :
Error in invoking target 'client_sharedlib' of makefile '/db/oracle/10.201/network/lib/ins_net_client.mk. See '/db/oraInventory/logs/installActions2011-02-11_01-01-54-07AM.log' for details.IMHO The answer is should be possible providing you install a suitable 32 bit os (eg RHEL 5 32 bit) as a guest (eg oracle/sun vm virtualbox) and install on the guest. This can be troublesome and awkward, but there are small subset of cases where this may right in some circumstances. And this answer is a little bit of a cheat really.
In general the earlier answers are better unless you have particular reasons.

Similar Messages

Oracle 10g on Red Hat Linux 9

Hello,
Contrary to what Oracle advise, we're about to install Oracle 10g on Red Hat 9. I'm afraid that the decision is out of my hands.
Has anyone installed Oracle 10g database on Red Hat 9? and if so, is the database running smoothly? If not what type of problems have you experienced?
Thanks in advenace.
Kind Regards,
Rudi

but my installation is failed :
after i type in ./runInstaller,the following exception is throw:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2004-08-26_04-56-29PM/installActions2004-08-26_04-56-29PM.log
why?thanks for any helps!!!!

Steps to install Oracle 10g on Red Hat Enterprise Linux 4 AS

Hi Friends,
I want to install oracle 10g on Red Hat Enterprise Lnux 4 AS. Can anyone give me steps how to install oracle 10g on it? My machine configuration Processor 2.66ghz Intel, Memory 1024 MB , HDD 160 GB, 845 mother board.

In addition to the excellent suggestion by Paul, you may want to look at the internet resources such as
http://www.puschitz.com
http://ivan.kartik.sk
http://www.dizwell.com
each of which as Oracle install on Linux cookbooks.

Installation of OracleAS 10g on Red Hat Linux ES 3.0

Installation of Oracle AS 10g on RedHat ES 3.0
Red Hat Enterprise Linux 3
Copy from OTN Note
Start
Oracle 10g is certified to run the base release of Red Hat Enterprise Linux 3 (Advanced Server and Enterprise Server) without updates. If you have update CDs, you can use the boot CD from the update instead of the boot CD from the base release to automatically apply all updates during the installation. All updates from Red Hat are supported by Oracle.
1.     Boot the server using the first CD.
o     You may need to change your BIOS settings to allow booting from the CD.
2.     The boot screen appears with the boot: prompt at the bottom of the screen.
o     Select Enter to continue with a graphical install on the console. (For other installation methods and options, refer to the Red Hat Installation Guide.)
o     The installer scans your hardware, briefly displays the Red Hat splash screen, and then begins a series of screen prompts.
3.     Language Selection
o     Accept the default.
4.     Keyboard Configuration
o     Accept the default.
5.     Welcome Screen
o     Click on Next.
6.     Mouse Configuration
o     Accept the default.
7.     Installation Type
o     Select Custom.
8.     Disk Partitioning Setup
o     A thorough treatment of disk partitioning is beyond the scope of this article, which assumes that you are familiar with disk partitioning methods.
(WARNING: Improperly partitioning a disk is one of the surest and fastest ways to wipe out everything on your hard disk. If you are unsure how to proceed, stop and get help, or you will risk losing data!)
This article uses the following partitioning scheme, with ext3 for each filesystem:
The 9GB disk on the first controller (/dev/sda) will hold all Linux and Oracle software and contains the following partitions:
- 100MB /boot partition
-1,500MB swap partitionâSet this to at least twice the amount of RAM in the system but to no more than 2GB (32-bit systems do not support swap files larger than 2GB). If you need more than 2GB of swap space, create multiple swap partitions.
-7,150MB root partitionâ This partition will be used for everything, including /usr, /tmp, /var, /opt, /home, and more. This was done purely to simplify installation for the purposes of this guide. A more robust partitioning scheme would separate these directories onto separate filesystems.
9.     Boot Loader Configuration
o     Accept the default.
10.     Network Configuration
o     It is usually best to configure database servers with a static IP address. To do so, click on Edit.
o     A pop-up window appears. Uncheck the Configure using DHCP box, and enter the IP Address and Netmask for the server. Be sure that Activate on boot is checked, and click on OK.
o     In the Hostname box, select manually and enter the hostname.
o     In the Miscellaneous Settings box, enter the remaining network settings.
11.     Firewall Configuration
o     For the purposes of this walk-through, no firewall is configured. Select No firewall.
12.     Additional Language Support
o     Accept the default.
13.     Time Zone Selection
o     Choose the time settings that are appropriate for your area. Setting the system clock to UTC is usually a good practice for servers. To do so, click on System clock uses UTC.
14.     Set Root Password
o     Enter a password for root, and enter it again to confirm.
15.     Package Group Selection
o     Select only the package sets shown here. Leave all others unselected.
o     Desktop
- X Window System
- Gnome
- KDE
- See my comments in the RHES 2.1 section regarding choice of GUI.
o     Applications
- Editors
- Graphical Internet
o     Servers
- Do not select anything in this group.
o     Development
- Development Tools
o     System
- Administration Tools
o     Red Hat Enterprise Linux
- Do not select anything in this group.
o     Miscellaneous
- Legacy Software Development
o     Click on Next to proceed.
16.     About to Install
o     Click on Next.
17.     Installing Packages
o     Software will be copied to the hard disk and installed. Change disks as prompted, and click on Next when the installation is complete.
18.     Graphical Interface (X) Configuration
o     Accept the defaults unless the installer does not recognize your video card. If your video card is not recognized, you will not be able to continue.
19.     Monitor Configuration
o     Accept the default if the installer correctly identifies your monitor. Otherwise, select a compatible monitor from the list.
20.     Customize Graphical Configuration
o     Accept the defaults.
21.     Congratulations
o     Remove the installation media from the system, and click on Next.
22.     The system automatically reboots and presents a new welcome screen.
o     Click on Next.
23.     License Agreement
o     Read the license agreement. If you agree to the terms, select Yes, I agree to the License Agreement and click on Next.
24.     Date and Time
o     Set the Date and Time.
o     If you want to use an NTP server (recommended), select Enable Network Time Protocol and enter the name of the NTP server.
25.     User Account
o     Create an account for yourself.
o     Do not create an account for oracle at this time. Creating the oracle account is covered later in this section.
26.     Red Hat Network
o     If you want to use or activate your Red Hat Network account now, accept the default, click on Next, and follow the product activation instructions that accompanied your Red Hat product.
27.     Additional CDs
o     Click on Next.
28.     Finish Setup
o     Click on Next.
29.     A graphical login screen appears.
30.     Congratulations! Your Linux software is now installed.
End of OTN Note
Now just install compat-db-4.0.14-5.i386.rpm
Gnome-libs-1.4.1.2.90-34.1.i386.rpm
Libpng10-1.0.13-8.i386.rpm
ORBit-0.5.17-10.4.i386.rpm
Install patch 3006854
Copy libcwait.so file from /etc to /lib
And make links
mv /usr/bin/gcc     /usr/bin/gcc323
mv /usr/bin/g++     /usr/bin/g++323
ln âsf /usr/bin/gcc296     /usr/bin/gcc
ln âsf /usr/bin/g++296     /usr/bin/g++
Kernel Settings as per requirement of ORACLE AS 10g in /etc/sysctl.conf
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 256 65000 200 256
fs.file-max = 131072
net.ipv4.ip_local_port_range = 1024 65000
kernel.msgmnb=65556
kernel.msgmni=4096
Then restart the computer
Login with Oracle user
now path setting as
I have done this by make two environment files
Infra.env
TMP=/tmp
Export TMP
TMPDIR=$TMP
Export TMPDIR
ORACLE_BASE=/oracle
Export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/appsrv/infra
Export ORACLE_HOME
ORACLE_SID=asdb     (if u will not define SID here then while starting database u will face an error ORA-07217:sltn:environment variable cannot be evaluated)
Export ORACLE_SID
PATH=/usr/bin:/usr/sbin
Export PATH
PATH=$PATH:$ORACLE_HOME/bin     (u can include command paths like dcm as u needed)
Export PATH
LD_ASSUME_KERNEL=2.4.19
Export LD_ASSUME_KERNEL
Copy this file with name as.env and change ORACLE_HOME from infra to as.
. ./infra.env
DISPLAY=localhost:0.0; export DISPLAY
Xhost +
Now u can check that DISPLAY is ok by run the command xclock if clock appears then ok else set DISPLAY with root user ok
Start installation from CD 1 .
. ./runInstaller
Press Y               (There is no need to disturb, upgrade, degrade any package)
Press Y
Installation will start while installing and reaches at ~50% then go to /oracle/appsrv/infra/bin open relink file and change at line # 50 i.e. remove 2 brackets
] âo [ and at line # 102 make= /usr/ccs/bin/make to /usr/bin/make remove ccs and save the file
There will no error in installation in infrastructure
Same as done with relink file in Middle tier installation. I would like to turn ur attention for a serious problem no one asked about it. Here u have seen that a script make 3 file in /usr/local/bin for infrastructure and middle tier when u finished infrastructureâs installation plz rename that 3 files as
Mv coredb coredb-infra
Mv dbhome dbhome-infra
Mv ora     â¦     oraâ¦-infra
If u overwrite that files by creating same name of middle tier files no problem.
When problem comes?
AS will work fine but when u have to install patches on AS then problem comes if u have overwrite that files. So plz rename them before creation of same files of middle tier. Thanx
Zeeshan Ali
@CES
[email protected]

Hi,
I tried uname -a and it returns the following:
Linux NLABLINUX 2.4.21-20.EL.c0 #1 Thu Sep 9 02:07:03 EDT 2004 i686 i686 i386 GNU/Linux
We have the following problems:
1. I am having a box running RHEL 3.0 (got from centos.org). I have Oracle 10g running ok. Now I tried to install ASMLIB downloaded from technet. The files are:
rpm -Uvh oracleasm-2.4.21-EL-1.0.3-1.i686.rpm \
     oracleasmlib-1.0.0-1.i386.rpm \
     oracleasm-support-1.0.3-1.i386.rpm \
When I tried to install these files, I got the following error:
Checking for Red Hat enterprise kernel: [FAILED]
Also when I try to run /etc/init.d/oracleasm , I get the same error
Checking for Red Hat enterprise kernel: [FAILED]
2. We created 4 raw partitions /dev/raw/raw1 - 4 using raw command.
[root@rcdell root]# ls -l /dev/raw/raw[1,2,3,4]
crw-rw---- 1 oracle dba 162, 1 Sep 9 11:05 /dev/raw/raw1
crw-rw---- 1 oracle dba 162, 2 Sep 9 11:05 /dev/raw/raw2
crw-rw---- 1 oracle dba 162, 3 Sep 9 11:05 /dev/raw/raw3
crw-rw---- 1 oracle dba 162, 4 Sep 9 11:05 /dev/raw/raw4
then tried this:
SYS at +ASM on 29-DEC-04 >create diskgroup dg1 normal redundancy
2 failgroup c1 disk '/dev/raw/raw1'
3 failgroup c2 disk '/dev/raw/raw2';
create diskgroup dg1 normal redundancy
ERROR at line 1:
ORA-00600: internal error code, arguments: [kfdsk::grpmatch], [1],
[3939617408], [], [], [], [], []
ORA-00600: internal error code, arguments: [kfgrpJoin2], [5], [], [], [], [],
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
ORA-15076: Emulating I/O errors on the OSM disk
Any help is appreciated.
Irshad A. Buchh
Senior Principal Consultant

Installing Oracle 10g on Red Hat Enterprise 4

Is it possible to install Oracle on this version of Red Hat?
I am getting these errors:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8 or UnitedLinux-1.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at...
My red hat release is:
Linux taurus 2.6.9-11.EL #1 Fri May 20 18:17:57 EDT 2005 i686 i686 i386 GNU/Linux
Red Hat Enterprise Linux ES release 4 (Nahant Update 1)
I mean version 4 is available for Linux, is it supported or not by Oracle?
thank you.

That is Oracle Database 10g R2, it looks like R1 is not supported.This is the point of mis understanding. I am was talking about x86 and you about x86_64. :-)
Also check this out for further confirmation...
"No certification projected for 10g R1 64-bit on RHEL AS 4 x86_64 at the time of this writing."<snip>...at the time of this writing.</snip>
Current status is projected for R2
Please let me know if I am missing something.Ok conlusion from this topic is RH 4 (x86_64) is not certified with 10g at this time.

Oracle 10g on Red Hat Fedora

I've downloaded Oracle 10g Express edition on to my computer running a Red Hat Fedora Linux OS. However having read the getting started page of the database setup and followed the instructions to open the Go To Database Home Page, on my applications menu section, I am greeted by a Unable to Connect to Server page. Followed by: Firefox can't establish a connection to the server at 127.0.0.1.
Has any one else had this problem? If so how can it be resolved?
I have already turned off the firewall on my OS and it has made no difference. Is it Oracles fault in that they have not maintained this page on their website? Or is it a problem with the way my computer is set?

If you were able to reach to the end of the installation, then make sure both your database and listener are up and running. OracleXE requires the database to be registered against the listener to have the http access enabled.
From an OS prompt, ensure your environment variables are properly set,
ORACLE_HOME=pathToYourOracleHome
ORACLE_SID=XE #verify the instance name, xe or XE, it is case sensitive
PATH=$ORACLE_HOME/bin:$PATH
Then issue this command to verify the listener is up and running:
lsnrctl status
There you should see the http port at 8080 and the XE instance registered against the listener.
And verify the database is working:
sqlplus / as sysdba
SQL> select status from v$instance
You should see OPEN as the status.
Please post the output of the above commands.
~ Madrid

Problems Installing Oracle 10g in Red Hat enterprise 5.3

I am trying to install Oracle 10g in Linux RH 5.3 the I get the following error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-05-07_11-08-08AM/jre/1.4.2/lib/i386/
libawt.so: libXp.so.6: cannot open shared object file: No such file or directory

This should help you out.
"Exception java.lang.UnsatisfiedLinkError: ../jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred" on RHEL5/OEL5 for 10.2 x86 or x86_64 install
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443617.1

Oracle 10g on red hat linux enterprise 4

Please
Is REH enterprise 4 is perfect for installing oracle 10g or are there any installation issues. please guide me any one
Nasir

Hi everyone
Even though I'm an Oracle ACE I'm not an ACE in the Linux operating system.
I am getting a new laptop that has 4 GB RAM and a server that has a quad-core with 4 GB RAM and SCSI drives. Both of these are using the Windows operating system, the laptop using WIndows XP and the server using 2003 Server.
I have been advised to use VM Ware to install Linux and then install my Oracle database and / or application server.
Has anyone done this and would you be willing to give me some pointers?
I also noticed in this thread that someone is not recommending the use of Linux 5 from Oracle but rather use version 4, update 5. Would you be willing to let me have the low down on this?
If anyone has any white papers or word documents that show how to install Linux 4.5 on VM Ware I would be most grateful. My email address is: [email protected]
Best wishes
Michael
Best wishes
Michael

Oracle 10G on Red Hat Linux

I have an OLD Compaq Workstation with 128MB RAM and 2 disk drives. One has Win98 and nothing else [5.5Gig Free] and the other drive is 4 Gig with Fedora on it [About 2.5 Gig free]. I am in the process of trying to install 10G on it. The install doc talks about a minimum of 512MB RAM and I am only installing Standard Edition. Would I still need that much of RAM in order to install 10G for a Single User???
Your thoughts are deeply solicited.

I want to clarify that I installed Oracle10g on RH9.
I did install it on Fedora.
This can help you:
http://www.puschitz.com/InstallingOracle10g.shtml#CheckingKernelParameters
Joel Pérez

How to install oracle developer 10g on red hat 5.3

Dear forum members,
i have to install oracle developer 10g on red hat 5.3 . I am searching on google and metalink but i did not find any doccument.
If somebody has some material or any doccument for this Installation plz help me.
regards

i have fullfilled pre-requisites to install developer 10g on red hat 4.5
i copy the source in "/var/opt/oracle/" Source is in .cpio format.
i unzip this source with cat Disk1.cpio | cpio -icd.
when i run the runINstaller it cant find /var/opt/oracle/..........Disk1/products.xml file.
when i find this file with command find -name 'products*' or find -name '*.xml'
i cant find products.xml.
is there any problem with source
reply

Oracle Database 10g on Red Hat Linux Virtual Machine download location?

anyone know where i can download the vmware image of redhat and oracle preinstalled?
its called "Oracle Database 10g on Red Hat Linux Virtual Machine"
i found a reference to it on this page, but the link at the bottom is broken.
http://www.oracle.com/technology/obe/10gr2_db_vmware/htmlfiles/readme_oracleonlnxeval.html
i want to test out oracle on redhat before i install it completely

Please don't cross post on many forums,
check where can i download a vmware image of redhat and oracle preinstalled?

Download oracle 11g/10g for red hat linux

hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO.
could you please tell me whcih linux version i have to install which support oracle for linux.
from where i get that
-linux installation files
-oracle installation files
both the above will install on oracle vm ware
thanks
Edited by: hard_stone on Sep 30, 2009 11:33 PM

hard_stone wrote:
hi,
I have installed VM WARE on my laptop now want to download linux ISO and Oracle ISO. Red Hat, Centos and Oracle Enterprise Linux are almost identical. The major differences are:
- Red Hat and Oracle Enterprise Linux are officially supported by Oracle to be used under Oracle products;
- CentOS is NOT officially supported
- the newer Oracle Enterprise Linux (OEL) includes an 'oracle-validate' rpm to reduce configuration guessing
Each Distro has it's purpose. I use SUSE and OpenSUSE for my office. And for general servers I use RedHat (when I need commercial support) and CentOS. I fully support CentOS and the CentOS community effort.
However, for the past year I have ONLY used Oracle Enteprise Linux under Oracle product. It is free, it is officially supported, if I need commercial support I can get it, and it has the Oracle Validated RPM to minimize my config effort. http://edelivery.oracle.com
So, as compared to the other respondent - I encourage using OEL and NOT CentOS.

OBIEE Linux Red Hat 64bit issues

Specs:
Linux Red Hat 64bit
OBIEE 10.1.3.4.1 using OC4j as web server
Oracle 10g
(If you need more, just ask. I'll provide what I can.)
Having the following issues when trying to start OBIEE.
--------------- Errors from NQServer.log ----------------------
2012-08-21 13:28:00
[nQSError: 43059] Init block 'getHDTimeZone': Dynamic refresh of repository scope variables has failed.
libclntsh.so.10.1: wrong ELF class: ELFCLASS64
[nQSError: 46029] Failed to load the DLL /local/opt/oraclebi2/server/Bin/libnqsdbgatewayoci10g.so. Check if 'Oracle OCI 10G' database client is installed.
2012-08-21 13:30:29
[nQSError: 43059] Init block 'GET_WEB_SERVER': Dynamic refresh of repository scope variables has failed.
libclntsh.so.10.1: wrong ELF class: ELFCLASS64
[nQSError: 46029] Failed to load the DLL /local/opt/oraclebi2/server/Bin/libnqsdbgatewayoci10g.so. Check if 'Oracle OCI 10G' database client is installed.
2012-08-21 13:48:36
[nQSError: 43059] Init block 'CURRENT QUARTER INTIALIZATION': Dynamic refresh of repository scope variables has failed.
libclntsh.so.10.1: wrong ELF class: ELFCLASS64
[nQSError: 46029] Failed to load the DLL /local/opt/oraclebi2/server/Bin/libnqsdbgatewayoci10g.so. Check if 'Oracle OCI 10G' database client is installed.
------------------ user.sh settings ------------------
# Linux: Oracle BI 32 bit mode
set +u
# Oracle Parameters
# Make sure that Oracle DB 32 bit Client is installed
ORACLE_HOME=u01/app/oracle/product/10.2.client/adminclient_10_2
TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:/opt/bin:$PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib32:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH PATH TNS_ADMIN ORACLE_HOME LD_LIBRARY_PATH
TNSNames.ora exist and are pointing to the server we expect.
THANK YOU!

svee,
Your responses are greatly appreciated and helpful but I have yet to get this working. Just for clarity, here are my current env settings. Does this help at all? [Note: Some "sensitive" entries have been removed completely while other's just have the data replaced.]
GLOG=/opt/otm610/glog/config
HOME=/local/users/[loginname]
JAVA_HOME=/local/opt/oraclebi2/jdk
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/u01/app/oracle/product/10.2.client/adminclient_10_2/lib32:/u01/app/oracle/product/10.2.client/adminclient_10_2/lib32:/u01/app/oracle/product/10.2.client/adminclient_10_2/lib
ORACLE_HOME=/u01/app/oracle/product/10.2.client/adminclient_10_2
ORACLE_SID=[someSID]
PATH=/u01/app/oracle/product/10.2.client/adminclient_10_2/bin:/opt/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/u01/app/oracle/product/10.2.client/adminclient_10_2/bin
SHELL=/usr/bin/ksh
SSH_ASKPASS=somePATH
SSH_CLIENT=IP.IP.IP.IP [IP address intentionally removed]
SSH_CONNECTION=IP.IP.IP.IP [IP address intentionally removed]
SSH_TTY=[intentionally removed]
TNS_ADMIN=/u01/app/oracle/product/10.2.client/adminclient_10_2/network/admin
# custom env's used for easier navigation
zOBI_CAT=/local/opt/oraclebi2/oraclebidata/web/catalog/
zOBI_DATA=/local/opt/oraclebi2/oraclebidata/
zOBI_HOME=/local/opt/oraclebi2/
zOBI_REP=/local/opt/oraclebi2/server/Repository/
-----------------------------------------------------

Install oracle 10g in windows 7 64bit,

if some one can help me i do not have 10g software to install, i am new with oracle and i want to learn 10g, for that i need to install 10g software, from where i can get it.
and do i install oracle 10g in windows 7 64bit.

http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html

Oracle 9i and Red Hat AS 4.0

How to install Oracle 9i on Red Hat AS 4.0 ?

Oracle9i, release 2 (9.2.0.6) is available on Red Hat Enterprise Linux 4 systems. Before you install Oracle9i on Red Hat Enterprise Linux 4, review the Oracle9i Release Notes Release 2 (9.2.0.4.0) for Linux x86, part number B13670-05. This document is available from the Documentation page on the Oracle Technology Network Web site.
http://download.oracle.com/docs/html/B13670_06/toc.htm

32bit Oracle 10g on Red Hat 64bit?

Similar Messages

Maybe you are looking for