3945BG Intel Adapter PEAP issue

Hi, We have few SONY laptops with this builtin adapter.. Unfortunately, these adapters do not seem to work when PEAP with WinXP, is used with Cisco APs. TAC has already disowned this issue, saying it is a Intel issue. As we are not getting much of support from our Laptop vendor, i am just curious if anyone has this issue and found any good workaround...
If any third party supplicant can overcome this issue, please provide pointers.. We would like to evaluate before purchasing it..
Well, fyi.. i have upgraded the latest firware on Intel.

Checked this link the SONY only support CCX v3 that part of the PEAP may not work w/ Cisco AP.
http://www.cisco.com/web/partners/pr46/pr147/partners_pgm_partners_0900aecd800a7907.html
http://www.cisco.com/warp/public/765/ccx/versions_and_features.shtml
Better check w/ SONY what is their CCX support ver., or try to use other authentication method....
Hopes this help.

Similar Messages

PI 7.1 adapter module issue

I deoplyed my module and worked fine. now i changed some code by adding parameter to module
strModuleKey = moduleContext.getContextData("module.key");
I changed the related things in my communication channel(gave parameters)
Now, i get below error while executing...
java.lang.ClassCastException: class com.sap.aii.af.sdk.xi.mo.MessageContext:library:com.sap.aii.af.sdk.libcom.sap.engine.boot.loader.ResourceMultiParentClassLoader428c6e04alive incompatible with interface com.sap.engine.interfaces.messaging.api.Message:interface:com.sap.aii.af.ms.ifccom.sap.engine.boot.loader.ResourceMultiParentClassLoader2dd7e4d6alive
Followed the below url but in vain..
PI JAVA ADAPTER MODULE PROBLEM
Incompatible with interface - Exception in Adapter Module
Issue on developing Adapter Module
Also if you are using PI 7.1 refer to the blog:
/people/stefan.grube/blog/2008/12/11/adjust-your-pi-70-adapter-modules-for-pi-71-in-15-minutes
Please let me know if u have any other suggestions other than this...
Thanks
Prabhakar

Hi Venkat,
Yes, you cannot add custom modules to soap adapter.
Please refer below documentation for the same..!!
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/8c4756224a6fb5e10000000a155369/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
Regards,
Swetha.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

Macbook air Mini DisplayPort to VGA Adapter connectivity issues

Hi pple,
Would like to ask if anyone is facing connectivity issues with Mini DisplayPort to VGA?
I am currently using the 2nd Gen Macbook Air with Intel HD Graphics 3000 384 MB. Sometimes when I connect to a montior (Viewsonic VA1918wm) it works fine, sometimes it just does not work and the laptop just shows me a blue screen.
I tried with out with my friend's Mini DisplayPort to VGA adapter, it has the same problem. Does this means that my macbook air mini disoaly port got a problem?
Thanks
Bryan

I am experiencing the same kind of problem... only with projectors. Some projectors will display the screen and then others wont even register with the MacBook Air.
Using an Apple Min Displayport to VGA adapter. It's hit or miss if it works. Firmware has been updated on the adapter but this did not help.
Anyone help with this?
Thanks,
Nathan.

Idoc Adapter Configuration Issues

Dear Collegues,
I have given up almost all hope on configuring my Idoc adapter as I have an error message that I am not sure of how to fix; I have read just about everything I can get my hands on....any help would be so much appreciated:
Scenario: Demonstrate a simple 'proof of concept' to send MATMAS from R3 ->XI -> R3
Sending system: [R3 4.6b] CL0510
Rec'g system: [R3 4.6b] EL0510
XI system 3.0: NXL220
Current error message in outbound RFC layer of CLO:
No service for system SAPCL0, client 510 in Integration Directory
<u><b>Per the documentation I have done the following:</b></u>
- RFC connections are all complete
- Port and Partner Profiles complete
- ALE model from sender for MATMAS
- IDX1 in nxl for ports
- IDX2 - matmas metadata
- Integration Builder [config]:
   *Technical and Biz systems set up
   *CL0510 is set up as 'services w/o party' and there is
   a generated idoc channel.
   *The Adapter Specific Identifier is the CL0510 log
    syst.
   *Receiver Determination is created w/
   idoc_inbound_asychronous as interface; not sure
   what "namespace" is so I threw the word Idoc in there
   *Interface Determination is created w/ above
    parameters except the receiver party and service have
    asterisks in them I can't seem to remove
   *Sender and Rec'r Agreements set up [again what goes
     in that namespace field?]
I think that identifies all of the configuration I have attempted to enter. I have been only able to read documentation and weblogs as XI training won't be happening for me and my collegues until another several weeks.
Thanks so much,
Jennifer Edmondson
Intel Corp, AZ

Hi Jennifer,
for the inbound to XI, e.g. CL0510 you don't have a sender agreement since when you setup up the WE21 trfc Port on CL0510 it points to the XI system as a regular type T SM59 connection. On the connection you can enable the TRACE flag and see in the trace what payload got sent and any errors. I had a problem with that as my user / password to the XI machine was wrong.
The other part I'm missing from your message is, did you do all the Repository stuff beforehand, e.g. import the IDOCs for each Software Components(defined in the SLD, Tech and Buiz System), then when you use the dropdown in the Directory the Namespaces will default as the urn:sap-com:document:sap:idoc:message. Again once you have done the repository there is no need to write namespaces by hand at all. Do not put an IDOC into a Message Interface, may be into an action if you like to put a scenario into the IR (not necessary).
On the Receiving IDOC Adapter you will specify all the RFC stuff for the EL0510 system and this one goes into an receiver agreement.
I'm sending MATMAS from R/3 to XI to File Adapter or SOAP and no issues at all.
On CLN510 in BD87 does the IDOC has a status of send? Does it look ok?
I hope this helps. I can make some screenshots of my config if that helps. Send me an e-mail to [email protected]
Cheers
Stefan

Dell D620-Intel 3945 + PEAP

Has anyone noticed an issue with Dell D620 Laptops using the Intel 3945 card and WinXP with regards to PEAP authenication (mschapv2)? We are migrating to a LWAPP enviroment, but current we have a large autonomous AP enviroment. We have a very mobile group of users that just received new laptops and ever since they have had random connections issues with the 3945Intel card. The laptop will go from full strengh to no strengh without even moving. At times the laptop even gets in a state where it requires a reboot in order to get authenictated. We have tried the newest Intel proset 11.1 and that doesn't seem to have resolved the issues. There is nothing in any logs to point to an issue. You can have an older laptop with an intel 2200card right next to it and not have these issues.

Ensure that you don't have 2 client connection managers enabled in your PC. For example, a Microsoft WzC and a ADU on the same pc will result in lot of connectivity issues. In such cases. disable one of these client utilities.

T60p and T61 LAN adapter connection issues

Hi all,
Strange issue concerning LAN adapter on both T60p and T61. Either thinkadvantage laptop is at a different remote location connected to headquarters via a ptp link(fibre). This remote link has been updated recently. DHCP is assigned from main officeto all user locally and at the two remote sites.
For some very strange reaso, these both laptops are the only systems at the remote site that cannot get assigend ip settings via DHCP. Also if I manually assign them static ip settings, (the limited or no connectivity icon disappears) which i presumed but there is still no connectivity to these two laptops via ping cmds etc.
Even more strange is when these laptops are brought to back to headquarters and are plugged into the network here, they get assigned ip settings like they should and everything works like it should.
Also all the other systems at the remote sites get their ip settings dynamically like they should.
The LAN adapters are intel
I have reinstalled drivers, used winsock repair tools and also plugged the laptops directly into the fibre swtich on the dedicated vlan port that connects to the local swtich at the sites. Still same syptom
I am very confused at the moment and would appreciate any advice or solution. At the moment I believe its how the network card communicates with the protocol on link maybe there is an issue. I am not sure. Appreciate any input guys/gals

Hi,
Do you enable ESB email notification in ESB Control for your ESB system and mail still not received?
Some errors cannot be caught by ESB email notification (for example, you use polling DB-adapter and provide a incorrect login password and so on, you can use rejection handlers for this type of errors. I not implemented this yet in our system but think it should work).
Errors raised when you ESB-process already started - may be caught.
You will receive email with flow_id, initial payload and error message (if didn't use asynchronous calls: bug 7616012 - error message is empty when error raised after asynchronous service invocation in 10.1.3.3 (can be not visible..)).
Best Regards,
Mikhail.

Dell Studio Laptop with Intel Core i5 S15Z with Intel Wireless Display issues (WIDI) (pkg deal)

i bought this laptop in Jan,2010 . Due to some h/w issue BB replace it in April. When i tested my wireless display capability using the the Intel Wireless Display option i got a message "Intel My Wifi Technology not enabled. Restart the computer and try again." i have restarted my laptop several times. Also in the icon tray when i keep the mouse pointer on top of Intel My Wifi Technology it gives a message "Adapter not found". Please help.
I took the laptop to Geek squad in BB and they told me that they need to put the laptop to factory defualt and troubleshoot the issue that why the wireless adapter is not enabled.
Any suggestion as i don't want to go through this madness of backing up the data and restoring again. This will be my 3rd time . Any other alternatives .
Anybody using the above system with Netgear push2tv . Can you share the output of device manager as i like to see what wireless device you are seeing as i am suspecting this laptop may not have one but then sice i see the s/w available i am confused ?

Almost every time we see a WIDI display issue, it is because the user is trying to use it too far away from the t.v.. It has a very short distance and when out of range, shows an adapter not found error. Playing with it, we found that over 15 ft it adapter wouldn't connect at all, and the closer the better as far as connectivity.
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Apple DVI to Video Adapter performance issues in Lion

I'm an active Apple DVI to Video Adapter user for a couple of years already and everything worked perfectly well until I've upgraded to Lion.
Everything on my TV screen is lagging now, even mouse pointer, and there is no change to watch any movie like that.
Does anyone have the same issue? Maybe someone could give me an advice of what could I do in order to improve graphics performance on TV screen using Apple DVI to Video Adapter? I'm using late 2007 MBP with 8600M GT video adapter.

I am having the exact same problem. I have a late 2007 MBP. I use it everyday where I teach. I use the adapter to project on a large white screen using S-Video. SInce the Lion update, it is very slow and has even completely crashed my computer a few times. I realize the MBP is getting a bit dated, but the difference between Snow Leopard & Lion is remarkable.

Mini displayport to dual-Link DVI Adapter - flicker issue resolved

I have a late 2013 Imac 27 inch and I had a 30" Dell 3007wfp as my second monitor on the standard DVI adapter for a while at low resolution. I finally got off my behind and bought the mini displayport to dual-Link DVI Adapter... I was excited to see it in all it's glory. It immediately started flickering wildly and I thought I'd do some reading to see how I could resolve it. Pointers to making sure the adapter was version 1.03 didn't help.
http://support.apple.com/kb/ts3232
I already had it. I was getting ready to bite the bullet and just take it back when I decided to see if I had another DVI cable to swap the one I was using out "just in case". I found another one.. same length. Darn it. Then I noticed the DVI cable diameter I was using was significantly thinner than the one I found in my box of etc... What the heck? I thought.
Connected it and BOOM! Vivid colors, high resolution, no more flickers!! Issue gone. Happy days!
Thought I'd post this to possibly help the next schmoe who is in the same situation

Hello,
From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

Mini Display Port to VGA Adapter Having Issues with My Samsung 40" HDTV

So I ordered the brand new 15" i7 Macbook Pro along with the Apple wireless magic mouse and wireless keyboard after having bought my HDTV (went on a bit of a spree) with the intention of using the TV as a monitor for couch surfing. But, upon hooking up the adapter to the TV, my macbook's screen flickered between that blue transitionary screen and it's desktop screen. It did this for a few minutes. I jiggled the cable thinking that there was a loose connection somewhere as that was the problem with my previous mini DVI to VGA adapter from Apple. I did a little research and it turns out that they released a firmware update in 2009 for such a problem. I downloaded the update and attempted to install it but it did not determine that there was even an adapter connected. So, I proceeded to call Apple, they man was very calming to talk to and make all of my problems seem to melt away, but there were no solutions reached. He thought that maybe my TV either had a problem or was incompatible with the adapter (incompatible with a VGA connection? can you get any more analoge that that?). So, here I am, the adapter seems not to have a problem with regular monitors but I am still experiencing intermittent disconnects from my TV. I still, superstitiously jiggle the connection whenever I have dropouts but that really doesn't seem to be the issue here (or at least I hope not because that could mean port issues with my new laptop). Any suggestions? I noticed, after changing some settings on my TV, in an attempt to remedy this, that the TV was displaying the picture funny, I turned the TV off and then on again and it fixed the problem. That being said, perhaps I just need to turn my TV completely off when I'm not using it, as I have been just letting it go into standby. Maybe it needs a restart every so often much like my computer. I don't currently have data to support that theory as I just recently tried turning it off, but, since then have not had dropouts.

You may have the screen refresh rate set higher than the TV is generally able to track reliably. It may be able to get there most times, but occasionally loses sync because it is out of its nominal range.
I suggest you sit down with the manual for the TV and find out what resolutions at what refresh rates it intends to support through VGA, and make sure your screen settings are near (or below) those limits.

Thunderbolt and MDP to VGA Adapter Compatibility Issue?

Hi Veterans,
I know this topic have been asked a lot of times by different people who faced the issue in different way. However, i am unable to find an absolute solution to the problem i am facing currently.
My question is, can a 3rd party made, Mini Display Port to VGA adapter works on MBP & iMac that have mini display port and not on those that have thunderbolt port??
I have a 3rd party made, Mini Display Port to VGA adapter that i have tried on 3 apple PC / laptop,
A MacBook (13-inch, Late 2009) which comes with Mini DispayPort, the adapter work with this laptop.
A iMac (21.5-inch, Late 2009) which comes with Mini Display Port, the adapter work with this PC too.
A MacBook Pro (13-inch, Late 2011) which comes with Thunderbolt port, the adapter does not work with this laptop. I have tried many solutions i can find on this forum and none helped.
The software is fully up-to-date as of 30 April 2013, running Mac OS X 10.7.5 (Lion).
Tried safe mode, does not helped.
Tried the boot up when monitor is already switched on procedure, does not helped.
In all cases, it was tested on the same external monitor. As my MBP was dual-booted using Bootcamp assistant 4.0, i also tried in windows-mode (windows 7) which didn't work too. In windows mode, the screen just keeps flickering while in mac-mode i get a light blue screen. In both cases, the external monitor shows nothing. The external monitor is a Compaq FP7317 monitor with native resolution 1280 x 1024 at 75.0 Hz.
All these trying have leave me very perplexed. From my research, the thunderbolt port is suppose to accept devices meant for mini display port. So how could an adapter that work on mini display ports, not work on a thunderbolt port? Can any expert enlighten me?

Problem solved. I picked up the MDP to VGA adapter and was able to use the monitors native res of 1920x1200 but the flicker and wavyness made it impossible to use. And yes the adapter had the current firmware. But what I discovered in the process was that in mirror mode I am unable to drive the monitor at optimum resolution. With that in mind I tried the MDP to HDMI adapter again, unchecking mirror mode, moving the Finder bar to the external display and SHAZAM. I have a rock solid display external display now running at 1920x1200 : )

Open Interface Adapter Import issue

Hi,
I am trying to import Open Interface Adapter xml file from Source Adapter option in ERPi but getting an error message - "Select Directory for Export".
Not sure if I am missing any step here. Does anyone know anything about this error?

THe issue was that Open Interface Adapter requires a directory to be created on the server and xml file to be placed here.

DB Adapter rollback issue

Hi All,
We have a DB Adapter in our BPEL message flow to insert records to target DB and in case of error while invoking DB Adapter we are catching the error in catch and catch all block.
But in some scenarios like when we pass value of larger size to columns than what is declared in table( eg: if we pass 'YES' to column which datatype and size is varchar2(1)) then error is not caught in catch or catch all block, instead the process is getting rolled back with below exception.
We have tried with both XA connection and also non-XA connection but still the same issue. We have also set the JTA timeout to "2400". Could you please help us on this ?
Thanks in advance
<exception class="com.collaxa.cube.engine.EngineException">
JTA transaction is not in active state. The transaction became inactive when executing activity "" for instance "460,011", bpel engine can not proceed further without an active transaction. please debug the invoked subsystem on why the transaction is not in active status. the transaction status is "MARKED_ROLLBACK". The reason was The execution of this instance "460011" for process "MSITesseractDBInsert" is supposed to be in an active jta transaction, the current transaction status is "MARKED_ROLLBACK", the underlying exception is "BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [InsertCustomerDataToTesseractDB.MotCustomerLoadIn]. Caused by java.sql.BatchUpdateException: String or binary data would be truncated.. Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-8152" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. " . Consult the system administrator regarding this error.
<stack>
<f>com.oracle.bpel.client.util.TransactionUtils.throwExceptionIfTxnNotActive#107</f>
<f>com.collaxa.cube.ws.WSInvocationManager.invoke#352</f>
<f>com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke#1070</f>
<f>com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke#584</f>
<f>com.collaxa.cube.engine.ext.common.InvokeHandler.handle#132</f>
<f>com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements#74</f>
<f>com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform#166</f>
<f>com.collaxa.cube.engine.CubeEngine.performActivity#2687</f>
<f>com.collaxa.cube.engine.CubeEngine._handleWorkItem#1190</f>
<f>com.collaxa.cube.engine.CubeEngine.handleWorkItem#1093</f>
<f>com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal#76</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage#218</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory#297</f>
<f>com.collaxa.cube.engine.CubeEngine.endRequest#4609</f>
<f>com.collaxa.cube.engine.CubeEngine.endRequest#4540</f>
<f>com.collaxa.cube.engine.CubeEngine._createAndInvoke#713</f>
<f>...</f>
</stack>Regards,
Ramesh
Edited by: Ramesh Menon on Mar 7, 2013 1:12 PM

Hi All,
We have a DB Adapter in our BPEL message flow to insert records to target DB and in case of error while invoking DB Adapter we are catching the error in catch and catch all block.
But in some scenarios like when we pass value of larger size to columns than what is declared in table( eg: if we pass 'YES' to column which datatype and size is varchar2(1)) then error is not caught in catch or catch all block, instead the process is getting rolled back with below exception.
We have tried with both XA connection and also non-XA connection but still the same issue. We have also set the JTA timeout to "2400". Could you please help us on this ?
Thanks in advance
<exception class="com.collaxa.cube.engine.EngineException">
JTA transaction is not in active state. The transaction became inactive when executing activity "" for instance "460,011", bpel engine can not proceed further without an active transaction. please debug the invoked subsystem on why the transaction is not in active status. the transaction status is "MARKED_ROLLBACK". The reason was The execution of this instance "460011" for process "MSITesseractDBInsert" is supposed to be in an active jta transaction, the current transaction status is "MARKED_ROLLBACK", the underlying exception is "BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception. insert failed. Descriptor name: [InsertCustomerDataToTesseractDB.MotCustomerLoadIn]. Caused by java.sql.BatchUpdateException: String or binary data would be truncated.. Please see the logs for the full DBAdapter logging output prior to this exception. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-8152" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. " . Consult the system administrator regarding this error.
<stack>
<f>com.oracle.bpel.client.util.TransactionUtils.throwExceptionIfTxnNotActive#107</f>
<f>com.collaxa.cube.ws.WSInvocationManager.invoke#352</f>
<f>com.collaxa.cube.engine.ext.common.InvokeHandler.__invoke#1070</f>
<f>com.collaxa.cube.engine.ext.common.InvokeHandler.handleNormalInvoke#584</f>
<f>com.collaxa.cube.engine.ext.common.InvokeHandler.handle#132</f>
<f>com.collaxa.cube.engine.ext.bpel.common.wmp.BPELInvokeWMP.__executeStatements#74</f>
<f>com.collaxa.cube.engine.ext.bpel.common.wmp.BaseBPELActivityWMP.perform#166</f>
<f>com.collaxa.cube.engine.CubeEngine.performActivity#2687</f>
<f>com.collaxa.cube.engine.CubeEngine._handleWorkItem#1190</f>
<f>com.collaxa.cube.engine.CubeEngine.handleWorkItem#1093</f>
<f>com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal#76</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage#218</f>
<f>com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory#297</f>
<f>com.collaxa.cube.engine.CubeEngine.endRequest#4609</f>
<f>com.collaxa.cube.engine.CubeEngine.endRequest#4540</f>
<f>com.collaxa.cube.engine.CubeEngine._createAndInvoke#713</f>
<f>...</f>
</stack>Regards,
Ramesh
Edited by: Ramesh Menon on Mar 7, 2013 1:12 PM

File Adapter Archiving Issue

Hi,
THe file adapter archives the file, it doesn't save the entire contents of the file in the archive folder, but saves the first recordset (row) only in XML format. Did any body face similar issue, and what's the resolution to archive the contents of the file, the way it was sent.
Thanks
Pandari

Hi Anil,
Refer Archiving concepts in below links.
http://help.sap.com/saphelp_nw73/helpdata/en/44/682bcd7f2a6d12e10000000a1553f6/content.htm?frameset=/en/44/6830e67f2a6d12e10000000a1553f6/frameset.htm
http://scn.sap.com/docs/DOC-35572
Warm Regards,
DNK Siddhardha.

3945BG Intel Adapter PEAP issue

Similar Messages

Maybe you are looking for