3F0 Error, Hard drive does not exist on Pavilion dv4.

I have a Pavilion Dv4 with windows 7 OS.
When I boot up the computer it tells me "No bootable device -- insert boot disk and press any key"
I have done the F2 system diagnostics and once I get there click the Hard Disk Test which brings me to where it says "Hard Disk Not Exist. Press <ESC> to continue" and prcoceed to hit Esc where it tells me the Hard disk test failed and "Boot device not found (3F0)"
After which I restarted and hit F10 to get to the BIOS which I then went to Diagnostics and tried to run the "Primary Hard Disk Self Test" and then it says "Hard Disk Not Exist" still. The memory test runs fine passes and gives me no errors.
I have also done a hard reset and have re-seated the hard drive and NOTHING has worked. Help would be appreciated because this has been happening for a VERY long time (just happened to be after the warranty ran out, convienent eh?) and I lucky had my fiances older laptop which is very old.

The notebook is not able to recognize the Hard Drive.
Are you shure that warranty of your PC has ended? Keep in mind that warranty starts from the date that you buy the PC.
If the Hard Drive test shows that the test failed, you will have to get it replaced. I suggest you to call HP technical support and get their advice on the available options for service.
I'm an HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Click on Thumbs up if my post helped you.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.

Similar Messages

New Hard Drive Does not exist!

Hello,
I have an HP DV6 -3142 Laptop and recently after owning it for around a year, my hard drive seems to have crashed. When I try to boot up the laptop, it asks me to use system repair to "repair" my problem or start windows normally. Booting normally causes the laptop to be stuck at windos and revert back to booting up again (it's like a closed loop!). If i choose to "repair" I get stuck at a blue screen where the HP system recovery is supposed to help me either reset to factory settings or do a system restore. I also did a hard disk test in the BIOS and got an error 303. I had done a bit of research and from what i heard, It was a hard drive problem. I got a new hard drive (Samsung) and now when I try to install windows 7, It says that there are no devices to load windows 7 onto. In other words, the Hard disk does not exist (also did a test in bios). I tried to reseat the hard drive and reset BIOS, it didn't work. Now, when I try booting the new hard drive, it shows me a message saying "Media test failure: check cable".
Any ideas on how i could go about fixing this problem?

Welcome Larg.
Sorry but it sounds like your new hard drive is DOA.
If you have a SATA to USB I would hook it up to another computer and test it that way.
Or you may try to install it in another computer and see if you can test it that way.
Sorry.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Hard Drive does not have enough space/error message

Hello: I am new to Mac but have been having trouble with my iMac for a while. I can no longer download my software updates. I have an error message that states "Your hard drive does not have enough space" - 5.7 GB is required.
I only have a 1 GB machine. What am I doing wrong?
When I go to my Macintosh HD icon on the desktop, it says at the bottom of that window that I have 495.9 MB available.
The error message tells me to go to the Startup file to delete items. I go there, but there's only two files. I do have music/photos/but I do not understand what's going on with my computer.
In addition, it turns itself off often, for no apparent reason. Any ideas?
Thanks!
J.Renee

The error refers to space on your hard drive, not memory. Unless you've mis-typed, if you have only 495.9 MBs free on your hard drive then you are definitely out of space. If you continue operating with so little free space you are risking a catastrophic loss of data.
To free up space you will either need to delete unneeded personal files or copy some of your bigger files off to an external hard drive then delete them from your internal drive. Alternatively you can replace the internal drive with a larger drive.
You should maintain no less than 15 GBs or 15% of the hard drive's capacity as free space whichever is greater.
If you meant to type 495.9 GBs then you may have a corrupted disk directory. Try the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Hard disc does not exist? g series

hi my notebook (hp pavilion g series 750g, 6 memory) has been rebooting its self then a black screen saying hard disc does not exist, then it won't let me on pc, any idea's please?
This question was solved.
View Solution.

Hi
Please try these steps might help you to fix the issue.
1) Once unit is powered on keep tapping the F10 key go to Diagnostics and check if the Hard drive is detect if Yes please run the test and if is working fine. Incase Hard drive is not getting detect please reseat the Hard drive from the back panel off the Notebook. Incase you have the same issue. Please check the warranty status and get the drive replace please call HP Technical support for the same.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

External hard-drive does not reconnect after sleep

Hi everyone
I am trying to use my Energy Saver to SLEEP my iMac after 1 hour. It goes to sleep no problem, but on wake-up, my external USB hard drive does not reconnect. There is also an error message that I didn't disconnect the drive properly. I fear this may be one of Mac OS X's "features". Has anyone encountered the same thing?
On a side note, I also find that my USB keyboard does not always reconnect as well. I use a windows USB mouse that I have connected to wake it from sleep, however my USB keyboard (the small one for Macs), sometimes does not allow me to type unless I unplug it and back in.
Another point of note is that both the HD and the keyboard are connected to the iMac through a 7 port USB hub.

r_dizzle wrote:
Another point of note is that both the HD and the keyboard are connected to the iMac through a 7 port USB hub.
I think this might be the issue. If the iMac is waking back up, it will likely be waking up this HUB, but the HUB might not be re-initialising the connection between OS X and the external drive or the keyboard.
After waking the iMac, if you unplug the external drive from the HUB, then plug it back in again, does OS X pick it up again? Have you tried plugging the external drive directly into the iMac and then testing what the result is?
If you read back on what you've said, you pointed out that you have a USB mouse that you use to wake the iMac from sleep. Is this mouse directly connected to the iMac? If so, it surely can't be a coincidence that a directly connected USB device can wake the iMac from sleep, but any USB devices connected to the iMac via a USB HUB cannot.
I would suggest you test the drive as it is directly connected to the iMac. I would complete the same test with the keyboard too. I think you'll find it's the USB HUB.
I hope this helps.

External hard drive does not shut down

Hello, When my mini mac goes to sleep my samsung external hard drive does not shut down or dismount properly. when i wake computer i have a error message stating improperly ejected hard drive. It also does not reconize HD until I disconnect and reconnet??? PLEASE HELP Thank you

My Mini was doing the same thing until I reset the PRAM. With four external drives. They would stop inadvertently with an "improperly ejected" error. Granted two of the drives went bad (6 and 7 years old) but a brand spanking new Seagate and a 3 year old Hitachi drive doing the same. Haven't seen the error since resetting the PRAM.
If you don't know how to do that, Reboot while holding the Cmd+Opt+P+R keys until your hear the startup chime three times and then release the keys.

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

ERROR: ORA-01041: internal error. hostdef extension does not exist

Hi, I got the following error message when I tried to insert a row in table TBL_ORDER.
ERROR:
ORA-01041: internal error. hostdef extension does not exist
INSERT into TBL_ORDER
ERROR at line 1:
ORA-03113: end-of-file on communication channel
We have Oracle version 8.1.5.o.2 and Linux version 6.1.
Following are the tables, triggers, loadjava definition and source programs:
TBL_ORDER
1 ORDER_MEMBER_FIRM_ID VARCHAR2(4)
2 ORDER_CLIENT_ID VARCHAR2(4)
3 ORDER_BRANCH VARCHAR2(3)
4 ORDER_SEQUENCE VARCHAR2(4)
5 ORDER_EXCHANGE_ID VARCHAR2(3)
6 ORDER_EXCHANGE_SEQUENCE VARCHAR2(7)
7 ORDER_CREATE_DATE DATE
8 ORDER_TYPE VARCHAR2(2)
9 ORDER_STATUS VARCHAR2(1)
10 ORDER_SYMBOL VARCHAR2(5)
11 ORDER_SUFFIX VARCHAR2(14)
12 ORDER_SIDE VARCHAR2(5)
13 ORDER_PRICE VARCHAR2(20)
14 ORDER_STOP_PRICE VARCHAR2(20)
15 ORDER_PRICE_QUAL VARCHAR2(10)
16 ORDER_QUANTITY VARCHAR2(6)
17 ORDER_TIF VARCHAR2(4)
18 ORDER_AON VARCHAR2(4)
19 ORDER_DNR VARCHAR2(4)
20 ORDER_CASH_NEXT_DAY VARCHAR2(4)
21 ORDER_SELLER VARCHAR2(4)
22 ORDER_ACCOUNT_TYPE VARCHAR2(4)
23 ORDER_OS_TS VARCHAR2(4)
24 ORDER_BOOTH_ID VARCHAR2(4)
TBL_CMSOUT
1 CMSOUT_MEMBER_FIRM_ID VARCHAR2(4)
2 CMSOUT_CLIENT_ID VARCHAR2(4)
3 CMSOUT_DATA VARCHAR2(120)
trg_order.sql
create or replace procedure OrderToCmsoutProc(cms_member_firm_id VARCHAR2,
cms_client_id VARCHAR2,
cms_branch VARCHAR2,
cms_sequence VARCHAR2,
cms_side VARCHAR2,
cms_quantity VARCHAR2,
cms_symbol VARCHAR2,
cms_price VARCHAR2,
cms_tif VARCHAR2,
cms_type VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'OrderToCmsout.test(java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_order
after insert on TBL_ORDER
for each row
CALL OrderToCmsoutProc (:new.order_member_firm_id,
:new.order_client_id,
:new.order_branch,
:new.order_sequence,
:new.order_side,
:new.order_quantity,
:new.order_symbol,
:new.order_price,
:new.order_tif,
:new.order_type)
commit;
show errors;
exit;
trg_cmsout.sql
create or replace procedure PackCmsoutSidProc(pck_member_firm_id VARCHAR2,
pck_client_id VARCHAR2,
pck_data VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'PackCmsoutSid.test(java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_cmsout
after insert on TBL_CMSOUT
for each row
CALL PackCmsoutSidProc (:new.cmsout_member_firm_id,
:new.cmsout_client_id,
:new.cmsout_data)
commit;
show errors;
exit;
loadORDERjava
loadjava -r -f -o -user userid/pswd OrderToCmsout.java
loadCMSOUTjava
loadjava -r -f -o -user userid/pswd PackCmsoutSid.java
OrderToCmsout.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class OrderToCmsout {
public static void main(String args[]) {
try {
test (args[0],args[1],args[2],args[3],args[4],
args[5],args[6],args[7],args[8],args[9]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test ( String parm_member_firm_id,
String parm_client_id,
String parm_branch,
String parm_sequence,
String parm_side,
String parm_quantity,
String parm_symbol,
String parm_price,
String parm_tif,
String parm_type)
throws SQLException
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt2;
try {
stmt2= conn.prepareStatement
("INSERT INTO TBL_CMSOUT VALUES (?, ?, ?)");
String datastring = parm_member_firm_id + "\\~" +
parm_branch + " " +
parm_sequence + "\\~" + "\\~" +
parm_side + "\\~" +
parm_quantity + " " +
parm_symbol + " " +
parm_price + "\\~" +
parm_tif + " " +
parm_type + "\\~";
stmt2.setString(1, parm_member_firm_id);
stmt2.setString(2, parm_client_id);
stmt2.setString(3, datastring);
stmt2.executeUpdate();
stmt2.close();
return;
} //try
catch (Exception e) {
System.err.println(e);
} //catch
PackCmsoutSid.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class PackCmsoutSid {
public static void main(String args[]) {
try { test(args[0],args[1],args[2]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test( String parm_member_firm_id,
String parm_client_id,
String parm_data)
throws SQLException
try {
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt1 = conn.prepareStatement
("SELECT sid_session_id " +
"FROM tbl_sid " +
"WHERE sid_member_firm_id = ? and " +
"sid_client_id = ?");
stmt1.setString(1, parm_member_firm_id);
stmt1.setString(2, parm_client_id);
ResultSet rs1 = stmt1.executeQuery();
while (rs1.next ()) {
String session_id_found = rs1.getString
("sid_session_id");
CallableStatement pack_pipe = conn.prepareCall
("{call DBMS_PIPE.PACK_MESSAGE(?)}");
pack_pipe.setString(1, parm_data);
pack_pipe.execute();
CallableStatement send_pipe = conn.prepareCall
("{? = call DBMS_PIPE.SEND_MESSAGE(?)}");
send_pipe.registerOutParameter
(1, java.sql.Types.INTEGER);
send_pipe.setString (2, session_id_found);
send_pipe.execute();
} //while
stmt1.close();
conn.close();
} //try
catch (Exception e) {
System.err.println(e);
} //catch
} //test
} //PackCmsoutSid
Thanks in advance for your help
Vinicio

you should post this question on the Application Server forum.
--Olaf

Error message "resource does not exist"

C6; have unistalled and reinstalled ovi store three times; now I get into the store, but when attempting to download app, get error message "resource does not exist". what is that???

hey guys just updating you all.. i wrote previously how my ovi store wasn't working, it gave me an error message 'resource does not exist'. i did soft/hard reset, also uninstalled ovi store and reinstalled STILL it wasn't working. It lasted a day. And today it's working fine. i think it was a problem with their server. It sorted it self out
But guys i did contact the team, and i got a reply that said i should do the following if it still doesn't work:
1. GO TO MENU
2. GO TO INTERNET
3. CLICK ON WEB
4.GO TO OPTIONS
5. GO TO CLEAR PRIVACY DATA
6. DELETE CATCHE AND COOKIES
That should apperantly work.
If not guys, then i wouldn't worry. Just like mines, yours should sort it self out

Package oracle.jdbc.driver does not exist!!

hi there..
am writing a JBDC application and i got the following error:
"package oracle.jdbc.driver does not exist"
what am i supposed to do??
well, am not sure, but i guess the above means that i dont have a JDBC driver for oracle; f i am right, where to get that from and how to install it (in terms of code and maybe enviroment variable)???
one more question: if i want connect to another DB engine than oracle, for example sql server or DB2, do i have to get a different driver??
Appreaciating ur cooperation
MOurad

Actually, if you're using JDK 1.4 or higher you should be using ojdbc14.jar from Oracle. classes12.zip is JDK 1.2 technology.
If you connect to another relational database you should always get the JDBC driver JAR from that vendor. They don't work across different databases. - MOD

Error: Selected disk does not exist (21) Module-SRE-700

Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...

Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

HTTP Error 404 :File does not exist

Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekhar

I have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file.

Excise Invoice creation error -Billing document does not exists

Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
Trupti

Resolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti.

3F0 Error, Hard drive does not exist on Pavilion dv4.

Similar Messages

Maybe you are looking for