"3rd Party Plug-Ins" Not Showing Up In Preference Pane...

I'm trying to install a couple of 3rd-Party Plug-Ins... Apparently the procedure for this is to go to Preferences, and in the "General" pane, there should be a heading that says "3rd Party Plug-Ins" along with buttons "Choose..." and "Clear" and a path.
On my General Preferences Pane, there is no such section... It goes right from "Content Library & Templates" to "Media," with no "3rd Party Plug-Ins" listed anywhere in the pane.
Using Motion 3.0.2.... Did something change and they didn't change the manual to match? Or is there some setting elsewhere that's making that option disappear?
Thanks!!!
Nick

Howdy,
The "3rd party plug-ins" section in the Library and preferences really refers to AE plug-ins. Third-party FxPlug plug-ins (like dvMatte or Boris Continuum) show up mixed in with the regular filters and generators.
That "3rd party plug-ins" path setting in the preferences doesn't appear on Intel-based Macs, as they're no longer supported. If you have a PowerPC system, they'll show up (and so will the setting).

Similar Messages

3rd Party Plug-Ins Not Listed Under Inserts

I have recently installed two 3rd party plug-in software - Stylus RMX and Kontakt 2. I installed the latest versions of the software that are compatible with an Intel based Mac. They appear under the library/audio/plug-ins/components but they do not appear under any of the headings in the Inserts tab.
Do you I have to reinstall Logic Express 8 after installing the plug-ins? Do I have to direct Logic Express 8 to the components directory. I have read all the manuals and I cannot find the solution.
Please help.

Thanks for the quick response. The RMX plug-in is in the Audio Units Manager. When I Reset and Rescan I get the following response which at the end is a pass, but the RMX plug in still does not show up in the Inserts tab.
Cabarete
Software response:
validating Audio Unit Stylus RMX by Spectrasonics:
AU Validation Tool
Version: 1.2.1b3
Copyright 2003-2007, Apple, Inc. All Rights Reserved.
Specify -h (-help) for command options
VALIDATING AUDIO UNIT: 'aumu' - 'Styl' - 'GOSW'
Manufacturer String: Spectrasonics
AudioUnit name: Stylus RMX
Component Info: Stylus Audio Unit.
Component Version: 1.6.1 (0x10601)
Component's Bundle Version: 1.6.1
* * PASS
TESTING OPEN TIMES:
COLD:
Time to open AudioUnit: 44.468 ms
WARM:
Time to open AudioUnit: 0.124 ms
FIRST TIME:
Time for initialization: 0.009 ms
* * PASS
VERIFYING DEFAULT SCOPE FORMATS:
Input Scope Bus Configuration:
Default Bus Count:0
Output Scope Bus Configuration:
Default Bus Count:8
Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 2: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 3: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 4: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 5: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 6: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Format Bus 7: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
* * PASS
VERIFYING REQUIRED PROPERTIES:
VERIFYING PROPERTY: Sample Rate
PASS
VERIFYING PROPERTY: Stream Format
PASS
VERIFYING PROPERTY: Maximum Frames Per Slice
PASS
VERIFYING PROPERTY: Last Render Error
PASS
VERIFYING PROPERTY: Instrument Count
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Instrument Count) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
* * PASS
VERIFYING RECOMMENDED PROPERTIES:
VERIFYING PROPERTY: Latency
PASS
* * PASS
VERIFYING OPTIONAL PROPERTIES:
VERIFYING PROPERTY Supported Number of Channels
PASS
VERIFYING PROPERTY Tail Time
PASS
VERIFYING PROPERTY Bypass Effect
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Bypass Effect) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Render Quality
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/1], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/2], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/3], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/4], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/5], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/6], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Output/7], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Group/0], which should be invalid.
WARNING: GetPropertyInfo (Render Quality) returning valid information for scope/element for [Part/0], which should be invalid.
PASS
VERIFYING PROPERTY Host Callbacks
PASS
* * PASS
VERIFYING SPECIAL PROPERTIES:
VERIFYING CUSTOM UI
Carbon View Components Available: 1
auvw StyM VST - Spectrasonics View
PASS
Cocoa Views Available: 0
DEFAULT PRESET: 0, Name: unused
auvaltool(714) malloc: * error for object 0x13d3f850: double free
* set a breakpoint in mallocerrorbreak to debug
HAS FACTORY PRESETS
VERIFYING CLASS INFO
WARNING: Preset name is not retained in retrieved class data
PASS
TESTING HOST CALLBACKS
PASS
* * PASS
PUBLISHED PARAMETER INFO:
# # # 74 Global Scope Parameters:
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
WARNING: PARAMETER SHOULD PUBLISH NAME AS CFString
* * PASS
FORMAT TESTS:
Reported Channel Capabilities (explicit):
[0, 2]
No Input, Output Chans:
0-1 0-2 0-4 0-5 0-6 0-7 0-8
X
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:1
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:4
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:5
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:6
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:7
WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:8
* * PASS
RENDER TESTS:
Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved
Render Test at 512 frames
Slicing Render Test at 64 frames
PASS
Render Test at 64 frames, sample rate: 22050 Hz
Render Test at 137 frames, sample rate: 96000 Hz
Render Test at 4096 frames, sample rate: 44100 Hz
Render Test at 4096 frames, sample rate: 192000 Hz
Render Test at 4096 frames, sample rate: 11025 Hz
Render Test at 512 frames, sample rate: 48000 Hz
PASS
Checking parameter setting
Using AudioUnitSetParameter
Using AudioUnitScheduleParameter
PASS
* * PASS
AU VALIDATION SUCCEEDED.
validation result: successfully validated
updating properties of AU Stylus RMX by Spectrasonics...done.

3rd party plug-ins not working in logic

I can't get my zero G & Hardcore bass plug-ins to show up in an instrument channal.

Hi,
you need to make sure your plugins are:
UNIVERSAL BINARY
Cheers
Egyptian Merchet and Groma Mac OS X (10.4.9) Black Coffee and a Black Staffordshire Terrier

AU Manager Crashes, Standard 3rd party plug-ins not working

I recently had a huge crash, down to the point where I eventually replaced my system drive with a brand new one, and started fresh.
After rebuilding my entire world, plug-ins that used to work, don't anymore - and they're standards that everyone uses (Kontakt 2.1, etc). I can't even get the AU Manager to load.....Logic just sits there forever with "the beach ball of death" untill I force quit.
Nothing "new" has been introduced. I've simply replicated the system I had before down to the T.
Any thougts?
I'm on 7.1.1 in 10.4.4
G5 2x2, LAP 7.1.1, 10.4.2, 4.5 gigs

Try removing all 3rd party plugins and see if Logic works by itself.
Add the plugins back to the components folder one by one, testing to see if they behave.
Sorry to hear about your crash, I have had this happen to me and it was a week of pain.
It really made me wish all plug ins were authorized on dongles, so that something like carbon copy cloner would have saved the day.

3rd Party Plug-ins not Found by Logic 9.1.7

I recently purchased two high quality plug-ins that are designed for Logic... they are both AU; one is the Eventide Blackhole reverb and the other Antares Mutator. I have a ton of other plug-ins that loaded perfectly in the past and are still present. BUT, for some reason, both of these installed successfully but Logic (running in 64-bit mode) skips right past the fact that they are in the Library/Audio/Plug-ins directory.
I am in the middle of doing remixes for a large band and really want to use these. Can anyone help???
Thanks,
Raven Lynch

Set Logic to open in 32-bit mode, then open a default empty project (not one you're working on) Logic should validate the plugins... after it's finished, close Logic, re-set to 64-bit mode and you should be ok.

I can't get 3rd party plug-ins to work

I downloade the delirium plug-ins from digidesign (the demo) and when I go to motion to open up the 3rd party plug-ins...nothing is there..I went to preferences and changed it in there...but still no luck...I even renamed the folder "3rd party plug-ins" and went back to preferences and did what the manual said...still no-luck....I was under he impression (from a earlier post), that these plug-ins work with motion as well as after-effects

Heya,
I have Delerium loaded, with no problems. I just keep a folder called "AE Plugs" where I store all my installed plug-ins, and I set the preference in Motion to look at that folder. They show up in the "3rd Party Filters" category in the Library.

3rd party plug-ins are not displayed in channel strip audio unit insert

I have successfully loaded several 3rd party plug-ins (Wave Masters and IK multimedia Studio Bundle) into my MacBook Pro. The files are shown in Library>Audio>Plug-ins>Components, in User>Downloads, and they appear in my Audio Unit Manager (for each the box is checked for access from Logic Pro). Yet, when I go to a channel strip to launch some of the plug-ins, the product does not show up under audio units. How do I get these plug-in files to the insert list for my audio channels? Unfortunately, I need to launch these plug-ins in order to authorize them with the vendor. I must be missing a key step, but I have not had this issue before with other 3rd party plug-ins. Thanks for any direction.

Also, I know in the case of my IK Multimedia Classic Studio Reverb, it will NOT be available from within my 3rd party plug-in list, on a MONO channel.
I need to be opening the list on a stereo track (or stereo Aux), in order to be able to select those plug-ins.
See if it's something that simple...

LP9.1.1/10.6.3 -- 3rd party plug-ins question..

The last 4 nights on my new system have been stable---iMac i7/LP9.1.1/10.6.3
Now i'm missing my 3rd party plug-is which i have not installed yet.
Stylus RMX
Omnisphere
Maschine is in the mail and i may jump at the Komplete 6/Kore 2 bundle sale.
What should i expect with 3rd party plug-ins and Logic 9.1.1, am still in 32bit mode, but lots of horror stories about noise on first note, crashes etc.
I bought this system for film scoring kinda stuff, so internal logic instrumenst are not enough for me.
Please advise.
Thanks
Faisal

I would suggest to make sure Logic is in 32bit mode when you first run it after installing your plug-in's. I had the darndest time trying to get my Komplete and Sample Tank's to show up- then it dawned on me that I was in 64-bit. Ran in 32-bit and the plug in manager found all the 3rd party stuff.
Once you have it installed (remember that a lot of plug-ins should be ran first in their standalone mode to authorize)- switch back to 64-bit and all should be good (for the most part).

How will FCPX implement 3rd Party Plug-ins?

From a Professional standpoint, the current version of FCPX is unusable on so many levels due to the absence of basic features that made FCP series the juggernaut it was until yesterday.
Here's my prediction of HOW Apple plans to distribute Plug-ins and Add-ons:
Apple is pushing towards a single, universal OS -- most likely a glorified iOS. And they're forcing FCPX users to upgrade to Lion so they have Appstore on their machines just to buy FCPX. Matter of fact, theyi're seeing more profit from Appstore/iTunes than their own computers! Ever since the success of the Appstore -- Apple/Jobs has been pushing to create products and services that will bring even more profit to the Appstore/iTunes business model.
Hence the release of the iPad and the development of iPad apps -- and the move to with OSX Lion.
The reason for this is so that Apple can take their flagship software like FCP --- and monetize all 3rd-party plug-ins and add-ons.
SO, once Apple has a consumer using FCPX, if they want Multi-cam or Import/Export features -- you will have to buy it as an add-on and sell all FCPX plug-ins and add-ons THROUGH THE APPSTORE.
Furthermore -- Apple will most likely force all 3rd-party developers to build plug-ins for FCPX as an APP -- and sell it THROUGH THE APPSTORE -- where Apple gets 30% commission -- stealing that money away from the developers, who in the past with FCP7, you were able to purchase directly from the developer.
SO -- FCPX isn't a revolution in editing....
FCPX is a revolution in MONETIZING FINAL CUT PRO PLUG-INS through the APPSTORE!

Apple is pushing towards a single, universal OS -- most likely a glorified iOS.
No they are not. OS X is a far more developed, powerful and mature OS than iOS. There is no sign that it is being some reduced in power in any way.There's a whole lot of fokks claiming it is simply because a few interface features from iOS are being added - note added - to OS X.
And they're forcing FCPX users to upgrade to Lion so they have Appstore on their machines just to buy FCPX.
Well I hate the argue but that's factually untrue as well. No FCPX users are not forced to upgrade to Lion. Snow Leopard users can buy FCPX today, long before Lion is introduced.
Regards
TD

3rd Party Plug-Ins causing Program Window to display Black

I've had this issue occur with 2 different 3rd Party Plug-Ins. The effect causing the issue at this particular moment is the new Magic Bullet Film plug-in, however, like I said this has happened in the past with a totally different plug-in (not related to Magic Bullet Suite at all, and was not a recent occurrence). At random times whilst color grading a project, sometimes when the play head moves, other times when a portion of the effect is altered in the effects panel, all of a sudden ALL clips that have said particular effect on them stop displaying video and instead anywhere I click in the timeline over any clip it just displays a black program monitor. There is no evidence of anything on any scopes, everything is just black. When I disable the effect in the effects panel everything goes back to normal, but if I re-check the effect it goes right back to black. The only fix I've found thus far is to close premiere and re-open it, but again, it keeps recurring at random times.
I'm currently running Premiere CC 2014 Build 8.2.0 (65) on Windows 8.1 with an Intel Core i7-3820 CPU.
If anyone else has either seen this or knows what the problem could be stemming from I would love some assistance with the issue.
Thanks!

The first time it occurred I did, because I had never seen the issue before on anything else so I thought it was specific to that plug-in, but now that it happened again with a totally different plug-in it makes me think its not the plug-in at all but instead Premiere that is causing the issue somehow.

CS5 & 3rd Party plug ins

I have PS/CS5 (standard version, not extended) and I have not upgraded to Lion as of yet. I have OnOne, Topaz and Nik plug ins that I use every so often. Has anyone used PS/CS5 with the various plug ins with Lion? And if so did you have any trouble? Our local Apple resale store said to wait to see if the companies who make the plug ins have an upgrade before I upgrade to Lion.
Thought I would see what experiences anyone has had.
Thanks, Sue

They sort of say DON'T USE OLD 3rd party PLUG INS!
"As with all previous versions of Photoshop, don't copy old third-party plug-ins, or plug-ins from previous versions of Photoshop, into the Photoshop CS5 plug-ins folder. If you have set the Additional Plug-Ins Folder in the Plug-Ins preferences to a folder, deselect this option."
Well where the heck are they supposed to go then? :-/ Their installers put them in the Plug-Ins folder...
I found for the couple I really wanted to import, and tried, once in 32 bit mode on startup (Switch this under "Get Info" for those reading along) - they worked just fine. Yes, 64 bit would probably be better, but I suspect that in many cases 64 bit "upgrades" aren't free - even though the features are no different.
For now, for my needs, this works and has been solved - thanks!

Using native Logic OSC support with 3rd party plug-ins & new touchOSC maps

Hi All.
Now that logic from 9.1.2 has native OSC support, I wandered if anyone has used it succesfully with their own customised touchOSC maps?
I'm not so interested in using touchsc as a transport/mixer for logic - which is what the default logic map that comes in touchosc s focused on, but more to control a few 3rd party plug-ins inside logic (FXPansion Geist & Strobe) - which would mean I need to create my own maps. It doesn't seem clear however if or how you can edit or use touchOSC maps which use the native OSC support bult into Logic
Anyone had any joy with this, or able top shed some light on possibilities & limitations?

For now they are OSCulator reliant, and that has some advantages: primarily that the user can easily remap anything that doesn't suit their needs. I've been using these for weeks and the combination has been rock solid so I wanted to go with it rather than wait for (and learn) the SDK.
The best part is that these bundles will include everything you need, including custom Kontakt multis, VSL matrix files and of course the OSCulator mappings - and building those may have caused carpal tunnel syndrome! Talk about a mammoth task... Anyway, the goal is for it to be an easy plug & play experience.
Trying to wrap up today or tomorrow - just waiting on some website reorganization...
Stay in touch!

Problem with 3rd Party Plug-Ins

I am running Logic Pro 7 and recently a majority of my 3rd party plug-ins quit working. When I try to load the plug-ins or open a song that uses the plug-ins, Logic unexpectedly quits. Some of the plug-ins that cause the problem are:
Spectrasonics Trilogy and Atmosphere
Plugsounds PS01-06
Ueberschall BPM120 and PLP120
Native Instruments Kompakt
This has happened before, but for some reason within two or three weeks, they just magically started working again. I could use an update on my OS (10.3.9) and some updates are available for the plug-ins, but why wouldn't everything continue to work as it had if nothing has changed? And is this absolutely necessary because I'd rather not because I'd have to update everything.

Did you update or change ANYTHING on your system? I've learnt that once I have a stable system, DONT upgrade unless you HAVE to, as updated plugins are designed to work on the most recent software, and sometimes dont get tested and/or work with "older" systems.
However, if you have not changed anything and are getting these problems, the most likely cause is either song corruption (though you said this is happening on multiple songs, so I doubt thats the problem) or preference corruption, which happened to me just a few months ago. Dont ask me how things get corrupted, but when they do you start to experience random weirdness. For example, recently all my songs stared giving me "memory errors" on stuff that use to playback fine. Once I rebuilt my preferences, every was stable again.
Here is a link to troubleshooting tips created by Bee Jay (a wise poster here). Follow them and they should fix your problems:
http://logicquicktips.blogspot.com/2006/10/troubleshooting-logic.html
Note: if you created any custom key commands for logic, do not trash your old preferences, as you can import your key commands from this file. Check your manual under import key commands. Here is a link to the PDF of the manual, which is easier to search:http://www.apple.com/support/logic/
If you want to turn off your plugins just to see if they are at fault (though it sounds to me like song/prefs corruption, not plugin problems) use the AU
manager. I'm not in front of Logic right now, but I believe its under either the apple pulldown menu, or the file menu, or one of the other menus "up top."
(sorry for my bad description). If you still cant find it, let me know and I'll look it up, but as I said, this sound like a corruption issue and not an issue with your plugins.
Best of luck!

Importing 3rd party plug-ins into CS5

Coming from CS3, I've tried drag and drop but no joy.
How do I get my plug-ins/filters moved over - or do I have to continue to use CS3 if I want to use them???
It's been some time and I'm not sure I even have the original installers or not - it would take some real hunting around to find them if I did. Some don't matter if I lose them, while many are used often. There *should* be a simple drag and drop, migrate or import function for this - where is it?

They sort of say DON'T USE OLD 3rd party PLUG INS!
"As with all previous versions of Photoshop, don't copy old third-party plug-ins, or plug-ins from previous versions of Photoshop, into the Photoshop CS5 plug-ins folder. If you have set the Additional Plug-Ins Folder in the Plug-Ins preferences to a folder, deselect this option."
Well where the heck are they supposed to go then? :-/ Their installers put them in the Plug-Ins folder...
I found for the couple I really wanted to import, and tried, once in 32 bit mode on startup (Switch this under "Get Info" for those reading along) - they worked just fine. Yes, 64 bit would probably be better, but I suspect that in many cases 64 bit "upgrades" aren't free - even though the features are no different.
For now, for my needs, this works and has been solved - thanks!

When I install OS 10.6 will iMovie 6 still be compatible along with the 3rd party plug ins?

When I install OS 10.6 -Snow Leopard-will iMovie 6 still be compatible along with the 3rd party plug ins?
Also, Firefox says Apple no longer supports OS 10.5 as far as security goes. Now what do I do?
I like to use both Safari and firefox.

iMovie 6 works just fine, even in 10.8. The plug-ins may not work in 10.7 and 10.8 as most use PPC code.

"3rd Party Plug-Ins" Not Showing Up In Preference Pane...

Similar Messages

Maybe you are looking for