3rd party tech systems for multiple business systems...

I think this might a very stupid question but still would like to post it..:).. In a 3parties involved scenario, can 1 technical system be assigned to multiple business systems , if all business systems refer to the same 3 party..or does each 3rp party business system needs its own technical system..
Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta.
-Teresa

Hi Teresa,
>>>Also I need to move only 1 product and the SWCV assigned to the product to QA..I do not want to export entire SLD..By exporting this single product and importing into the SLD of QA, I hope it will not overwrite the SLD components of the QA box but add this new product as delta
I believe you can only do an incremental export/import
sld does not allow importing/exporting one product...
Remember to do a backup of your QA SLD
(from the SLD - administration)
then if you make a mistake nothing will happen
about the second question:
<i>"Business systems, which name the logical receiver independently of technical properties. For example, a business system might be a client of an SAP system.
Technical systems with which the hardware of the system is specified in more detail (server data, and so on)."</i>
this should be possible not only for SAP systems
Regards,
michal
Message was edited by: Michal Krawczyk

Similar Messages

  • XML Gateway for Oracle Applications to 3rd Party Application System

    Hi,
    I am having one unique requirement for sending/receving an xml file from Oracle Applications to 3rd Party Application system (which supports XML). Has anyone worked on the XML Gateway for sending/receiving the PO/ASN or Pick Release/Ship Confirm XML information from Oracle Applications (11.5.9 or above) to 3rd Party Application System.
    Looking forward your valuable inputs/suggestions on this.
    Note: Please note that, Trading Partner setup has to be done for a 3rd Party Application System.
    Thanks in advance,
    Regards,
    Muru

    Hi
    Were you able to acheive this , Please share the steps you followed by dropping a mail to [email protected]
    Thanks
    Prasad C P

  • Developing 3rd party UWL Connectors for People soft system or other Java sy

    Hi Everyone
    We have one requirement that is u201CDeveloping 3rd party UWL Connectors for People soft system or other Java systemu201D and get the workflows from those system and display in portal though UWL.
    We used u201CUWL Custom Connector APIu201D and written all the required methods.
    Could any one help us u201CWhere can we specify the 3rd party system details?u201D
    If possible please send some sample coding for it.
    Thanks in advance
    Sat

    Hi Satya!
    Like the default SAP backend UWL connectory your 3rd-party connector should make use of a PCD System Object. This system is a mere java component with nothing more than a portalapp.xml defining all the system properties.
    Create a system in the portal system landscape based on the System PAR you depoyed.
    For every UWL connector you create in portal you define a system alias. This alias has to match the one of your new system object.
    And now for the sad part: I didn't find any clue yet about how to access the system from a custom UWL connector. The system alias is available in the method getItems(), but no hint whatsoever how to get the system object to the alias.
    I'm still investigating this, since i'm exactly at this point.
    Regards,
      Juergen

  • RPTEZL00 PDC time evaluation (supply to 3rd party payroll system).

    Hi All,
    Please let us know if any of you have worked on RPTEZL00 PDC time evaluation (supply to 3rd party payroll system).
    We have an issue where in our end user has run this report for the month of july twice once on 21st july 2008, again
    on 12.08.2008, in the second run she has selected with recalculations instead of "diff also in current period".
    Please let me know is there any way to get the data again for diff also in the current period only.
    Thanks
    Veeresh G. R.

    system generated Idoc or the file

  • 3rd party cooling systems?

    Living in Southern California, I have a hard time keeping my G5 tower cool during the summer. My cpu heat widget has been showing tempatures between 139 to 150 degrees.
    Does anyone know of any 3rd party cooling systems out there that might help bring this number down?
    I have an old pci card that was a cooling fan, but it requires the type of old power cables you'd find in a G3 or G4 tower.
    I've heard about liquid coolant systems. Anyone know about those?
    Thanks in advance.

    Hi Enio;
    My Quad is always reporting CPU tempertures between 140 and 150 no matter what the room temperture is. I am running F@H on all four CPUs so they are all 100% busy. The only thing that changes in my system as the room temperture goes up is the fan speed. I don't think your temperture are out of line.
    Allan

  • Error while exporting the 3rd party technical system in SLD

    Dear all,
        We're currently using PI 7.0. When trying to export the technical system in SLD, after the exporting, the IE jumps to the download page automatically, but there's a exclamation mark with no text info. I've tried to create a new 3rd-party technical system and try to export, the same thing happened.
        It happened in both our develop and our production PI system.
        Also I've found following error info in SLD server log:
    Log Record Details
    #33 04/19/2007 10:07:38.573 [SAPEngine_Application_Thread[impl:3]_33]
    ERROR com.sap.sld.wd.technicalsystem.ExportView: null
    Thrown:
    java.lang.UnsupportedOperationException
    at java.util.AbstractCollection.add(AbstractCollection.java:216)
    at java.util.AbstractCollection.addAll(AbstractCollection.java:319)
    at
    com.sap.lcr.webui.admin.ImportExportControl.addAssociatorAndReferenceNames(ImportExportControl.java:1244)
    at com.sap.sld.wd.technicalsystem.ExportView.getBCSystemExportList
    (ExportView.java:285)
    at com.sap.sld.wd.technicalsystem.ExportView.getExport
    (ExportView.java:193)
    at com.sap.sld.wd.technicalsystem.wdp.InternalExportView.getExport
    (InternalExportView.java:137)
    at
    com.sap.sld.wd.technicalsystem.wdp.IPrivateExportView$IContextElement.wdGetObject(IPrivateExportView.java:208)
    at com.sap.tc.webdynpro.progmodel.context.AttributePointer.getObject
    (AttributePointer.java:158)
    at com.sap.tc.webdynpro.clientserver.data.DataContainer.getAndFormat
    (DataContainer.java:1092)
    at com.sap.tc.webdynpro.clientserver.data.DataContainer.getAndFormat
    (DataContainer.java:1064)
    at
    com.sap.tc.webdynpro.clientserver.uielib.standard.impl.FileDownload._getData(FileDownload.java:81)
    at
    com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.FileDownloadAdapter.getReference(FileDownloadAdapter.java:291)
    at com.sap.tc.ur.renderer.ie6.LinkRenderer.render(LinkRenderer.java:53)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(GridLayoutRenderer.java:826)
    at
    com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridLayoutRenderer.java:424)
    at
    com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutFragment
    (GridLayoutRenderer.java:336)
    at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.render
    (GridLayoutRenderer.java:79)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at com.sap.tc.ur.renderer.ie6.GroupRenderer.renderGroupFragment
    (GroupRenderer.java:1184)
    at com.sap.tc.ur.renderer.ie6.GroupRenderer.render
    (GroupRenderer.java:74)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutItemFragment(FlowLayoutRenderer.java:254)
    at
    com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutFragment
    (FlowLayoutRenderer.java:210)
    at com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.render
    (FlowLayoutRenderer.java:49)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
    at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
    (ScrollContainerRenderer.java:74)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
    at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
    (ViewContainerRenderer.java:49)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutItemFragment(FlowLayoutRenderer.java:254)
    at
    com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.renderFlowLayoutFragment
    (FlowLayoutRenderer.java:210)
    at com.sap.tc.ur.renderer.ie6.FlowLayoutRenderer.render
    (FlowLayoutRenderer.java:49)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
    at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
    (ScrollContainerRenderer.java:74)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
    at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
    (ViewContainerRenderer.java:49)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.renderViewContainerFragment(ViewContainerRenderer.java:134)
    at com.sap.tc.ur.renderer.ie6.ViewContainerRenderer.render
    (ViewContainerRenderer.java:49)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutCellFragment(GridLayoutRenderer.java:826)
    at
    com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutRowFragment(GridLayoutRenderer.java:424)
    at
    com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.renderGridLayoutFragment
    (GridLayoutRenderer.java:336)
    at com.sap.tc.ur.renderer.ie6.GridLayoutRenderer.render
    (GridLayoutRenderer.java:79)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.renderScrollContainerFragment(ScrollContainerRenderer.java:619)
    at com.sap.tc.ur.renderer.ie6.ScrollContainerRenderer.render
    (ScrollContainerRenderer.java:74)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.UiWindowRenderer.render(UiWindowRenderer.java:52)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:434)
    at
    com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:133)
    at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendHtml
    (HtmlClient.java:1039)
    at
    com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.fillDynamicTemplateContext(HtmlClient.java:455)
    at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
    (HtmlClient.java:1223)
    at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
    (HtmlClient.java:1179)
    at com.sap.tc.webdynpro.clientimpl.html.client.HtmlClient.sendResponse
    (HtmlClient.java:299)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.finishTasks
    (AbstractClient.java:173)
    at
    com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
    at
    com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:753)
    at
    com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing
    (ClientSession.java:261)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
    at
    com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent
    (DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost
    (DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
    (HttpHandlerImpl.java:401)
    at
    com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
    (RequestAnalizer.java:387)
    at
    com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet
    (RequestAnalizer.java:365)
    at
    com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle
    (RequestAnalizer.java:266)
    at com.sap.engine.services.httpserver.server.Client.handle
    (Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request
    (Processor.java:160)
    at
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
    (MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run
    (ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run
    (SingleThread.java:170)
    Hope you can help us.
    Thanks and B'Rgds,
    YiNing

    not sure if it has relevance, but the SLD level transports will do nothing but create a CIM file which should be downloaded to your deskktop.
    1. Make sure that there are no Pop Up BLocker's acting on the XI server on your machine.
    2. Make sure that you have the download authorizations on your machine.
    Regards
    Bhavesh

  • How to connect WDJ to 3rd Party Backend Systems(Oracle).

    Hi Friends,
    How to connect WDJ to 3rd Party Backend Systems(Oracle).
    Please give Step-by-Step Explanation. This is first time I am connect  to Oracle System. Can you give Step-by-Step Explanation.
    Regards
    Vijay Kalluri

    I recommend that you perform the access to Oracle through an EJB and consume this EJB in WebDynpro.
    http://wiki.sdn.sap.com/wiki/display/WDJava/OracleConnectivitywithEJBusingWebDynproApplication
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d2638c-4b04-2d10-d2a3-992fdf1e3d55
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70929198-0d36-2b10-04b8-84d90fa3df9c
    regards,
    Angelo
    Edited by: Angelo Antonello Borges on Jun 16, 2010 10:52 AM

  • SQL Server Express 2012 ok, and is this better than 3rd party  SVC system?

    Hi. Can anyone advise if:
    RoboSource control will work on SQL Server Express 2012, or is some earlier version required.
    Is RoboSource control a more elegant (more integrated) solution than a 3rd party SVC system, such as our Perforce system (with MSSVC plugin installed on RH.)
    Thanks.
    -Kurt

    Hi Kurt.
    RoboSource Control to my knowledge hasn't been developed in recent releases. It is essentially the same product that existed years ago. It works, but does not have a lot of users. Most people, including myself, prefer to use third party products such as Perforce, SVN.
    As RoboSource Control is an old product and isn't widely used, I doubt whether anyone has tried using it on SQL Server Express 2012. That is not to say it won't work on it though.

  • 3rd Party Plug-ins for Illustrator

    EskoArtwork has a Dynamic Barcode 3rd party plug-in for Illustrator that is listed on the Adobe wesbiste for Illustrator CS6.  I puchased it and downloaded it but during the install I get a message saying it can't find a compatible Adobe Illustrator installation on my computer (I have CS6 installed).  Upon reading the information on EskoArtwork's package, it says it is only compatible with CS4, CS5 and CS5.5.  Is there a way to get this to work with CS6?  If not, I would suggest Adobe take it off their list of Plug-In's for CS6. 
    Also - if it is not compatible, does anyone know of a similar plug-in that would generate and insert bar codes into packaging designs?
    Thanks!

    You'll probably need to ask EskoArtwork about this.
    In past versions, I've been able to move plugins from the plugin directory for the old version to the new version, and often it worked.  (YMMV, it depends on changes in the SDK.) You might try creating empty directories for a CS5 version number to see if the installer will work.

  • What is the best 3rd party optical drive for my mac?

    What is the best 3rd party optical drive for my mac?

    I really like this drive, it reads/writes DVD's and CD's just fine on my mac and on my PC aswell also it has only 1 USB so it will only take up one of your 4 USB's
    Amazon UK link
    Amazon US link

  • Single Cheque for Multiple Business Area

    Hi Experts
    How can I print one cheque for multiple business area with the option of printing different cheques still remaining?
    Thanks
    Nadia

    Hi Nadia.....If Iam not mistaken you DONOT want to make Separate Payments for each Business Area.
    In such a case donot select the checkbox Separate Payments for Business Area -FBZP--Paying Company code customisation.
    If this indicator is set, line items from different business areas are paid separately.
    Hope Iam clear about this.
    Please assign points if helpful
    Regards
    Aravind

  • 3rd Party Email Application for CF

    I know there are 3rd party email applications for CF ... Can
    anyone point me to them and/or let me know if they have worked
    better. I'm looking for more power with email (tracking, sending,
    routing, etc).
    Thanks,
    Joe

    Yeah, that might be to much. Normally, CF will directly send
    to your mailserver (usually IIS mail services) and if something
    goes wrong your only options reside in looking at the CF logs if
    you're logging mail. But I know there are some third party apps
    that do more tracking/resending then send to your mail server (and
    or better bulk mail processing). In your case you've just handled
    it more complexly by using an Exchange Server. That will be
    overkill for me plus a good amount of time learning and installing
    (not to mention price tag).
    Joe

  • IPayment with 3rd Party payment system

    Hi All,
    I have to configure iPayment with the third party payment system. the 3rd party talks with the Paymentech for credit card processing.
    Here in this case,
    1. 3rd party server is providing web services to talk with them
    2. 3rd party server is working fine with the Paymentech
    Issues
    1. As per my understanding, I have to use Gateway model overhere. Correct me if I am worng?
    2. Do I need to create any configuration servlet to talk with 3rd party server or is there any other way?
    3. At which point I should call the web services provided by 3rd party?
    4. How to create request as per the web service requirements and how to solve the response provided by web services?
    Thanks in advance

    Hi,
    If your third party system talks with Payment Tech, Is it possible for you to confiure payment Tech directly with iPayment. As you know that oracle provides all the necessary confguration and servelt. Its pretty striagt forward and simple.
    Find out whether you can use payment tech directly, that should solve most of your issues. If you need more information, let me know
    Thanks,
    RK
    925 998 1494
    Independent Techno Func Consultant

  • Can PU12 fetch results from 3rd-party payroll systems?

    Gurus:
    We have configured PU12 to export master data or master/payroll data to 3rd-part systems.
    Could you tell us how to fetch the results from external 3rd-party systems back to our ECC system?
    Thanks!

    Hi Ashley,
    You can import the wage types from 3rd party systems into SAP. Then you can run the payroll in SAP system.
    Check the following description taken from help.sap.com.
    You use the Import wage types function to transfer wage types from a third-party system to the
    payroll results of the SAP System.
    For more information, see the Implementation Guide (IMG) for Cross Application
    Components under Predefined ALE Business Processes   Human Resources 
    HR External Systems   Connection With an External Payroll System   Import
    Payroll Results or in the SAP Library under CA Cross Application Components 
    Business Framework Architecture (CA-BFA)   Library of ALE Business Processes
      Human Resources   Human Resources - External Applications   Process Flow:
    Import Payroll Results from a Third-Party System [Ext.].
    Starting the Import
    Prerequisites
    You have successfully run payroll in a third-party system.
    Procedure
    1. In the menu, choose Import wage types   Create IDocs.
    You access the IDoc Inbound Processing Via File screen.
    2. In the Complete file name field, enter the name of the input file.
    3. Choose Execute.
    The system message contains the number of created IDocs.
    4. In the menu, choose File   Import wage types   Create IDocs.
    You access the Inbound Processing of IDocs Ready for Transfer screen.
    5. Enter MANAGEREXTPAYROLL_INSERTOUT as the Message type and, if required, enter the
    Creation date and the Creation time.
    6. Choose Execute.
    Result
    The wage types created in the third-party system are available for further processing in the
    interface tables of the SAP System.
    You can then start payroll in the SAP System and perform the subsequent payroll activities:
      Create a remuneration statement
      Run posting to Accounting
    Regards,
    Dilek

  • Is 3rd party software required for auto creation of DIR for scanned copy,

    Hello SAP gurus.
    The current business process is there are 100s of service order, (IW31 creation TC) and each service order has its own 50-60 external documents attached to it.
    unfortunately there is no standard link from SAP DMS at Service order (lW31, TC) level.
    Here i tought of creating a document folder in EDMS or structure with the reference of service order No. And keeping this service order as reference we need some 50-60 documents (files) to be directly assigned to the main service order No, with out any manual intervention.
    Here is what the user does in the present system
    With our client in the present system they use a 3rd party software  for mail and scanner interface, here Any x, y, z user scans an document or Mails a document with attachments, just giving the subject line as the Service order already created.
    The document attachment directly comes and sits inside the predefined Service Order folder. Along with the user name who sent the document and the time he sent the document.
    Is the same thing possible in SAP ie.. Creating or attaching documents with out any manual interventions taking the reference of Mails sent having the subject line as the DIR
    Does this require 3rd party interference to do this,  will any BAPI  /BADI to do this for DMS with out 3rd party software.
    is there any upload programme that should be used which will avoid 3rd party software.
    please explain. points waiting.
    Thanks and warm regards
    Priya S
    Edited by: Priya S on Mar 16, 2009 4:32 PM

    Hi Priya
    Creation of New Object link is not so hard job.If any expert ABAP Consulatnt is available he can do in a week.But It all depend on his understanding of functionality clearly and quicky.
    For developement of new object link check this link.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/b2/c043a66fab11d1949500a0c92f024a/content.htm
    They work fine if you develope it as per procedure in above link.You just need good ABAP'er.
    If you are trying  upload Proggramme to upload the files daily basis from folder you can do this .
    Just  create folder on desktop put some docuemnts and run BDC to upload the document to DIR.I had tried once. Get help of Good ABAP'er to do your job.
    If any help please get back.
    With regards
    Mangesh Pande

Maybe you are looking for