4.1 Webi Publication does not have Delivery Rules

I have created a publication for a Webi report in 4.1 BOE. I noticed that the publication does not have an option for Delivery Rules, which is available for Crystal Reports. I'm not sure if that is by Design, as I don't know why it would be available for one and not the other. Here's a summary of the issue:
My publication uses Dynamic Recipients which number over a hundred. Anytime the publication is run, only a few will actually have a report that contains data and is based on if they have posted data for the week or not. Thus it's always an unknown on who should receive a report before run time. So what winds up happening is I get a publication that emails a 100 or so blank reports and about 4 or 5 reports that actually contain data. Obviously the intent is to only send out the 4 or 5 reports that actually contain data. The Publication itself actually works as intended, but as I mentioned before Crystal has Delivery Rules that allow you to "Deliver only when report contains data" which is what I need in Webi.
Does anyone know of a way to get this to work in Webi without the Delivery Rules option? The workaround of course is to re-create the Webi report as a Crystal report and to create a publication for the Crystal report. But the desire is for this to be a Webi report so I am trying to figure out a solution.

Hi,
Gill is right, on page 133 of SAP BusinessObjects Business Intelligence Platform Document Version: 4.1 Support Package 3 - 2014-03-26 Business Intelligence Platform User Guide, it states that "This feature is not available for Web Intelligence documents"
I'd suggest you to vote for the "Delivery Rule for web-i based publications" on SAP Idea place on https://ideas.sap.com/ct/ct_a_view_idea.bix?c=1DA84A30-1E5A-43FA-95C5-857A8B99D197&idea_id=7E9C5B32-62A9-48BA-9867-BDF2429FB5FE.
Hope this helps,
Jin-Chong

Similar Messages

Email on Verizon Yahoo Web Site does not have any emails in my inbox

I am having on heck of a time trying to get help via phone with Verizon on this issue. I am either given a runaround or I get put on hold for an extensive amount of time...okay enough of venting. Here is my problem...
I recently updated from Vista Home Premium to Windows 7 using Windows Live Mail. I was not receiving my emails and found out that I was using the wrong incoming and outgoing settings. That has been corrected.
Now, when I go to the Internet Verizon Account, I have no emails in my inbox...NONE!
I have even sent emails to my account from another computer (work). There is no response that it was undeliverable.
I am having no problems with my internet connection.
I hope someone out there can help me with this issue.

Just to confirm ... by Verizon Web Portal, you mean the Verizon branded Yahoo! web portal page? Correct?    Just want to be sure you're looking in the right place.
If you go into your account settings on Verizon, does it say there that you are the "Yahoo!" experience (probably also has an option listed to allow you to change to AOL as well).
If it says Yahoo! and you are looking on the Yahoo! web portal inbox, then it sounds like your mapping over to the Yahoo! side is not setup properly within the Verizon cloud.   That would take a call to tech support to fix.
Just for giggles, have you tried changing your mailbox password (and not recofniguring any mail clients, etc.).   Just to make sure something isn't quickly grabbing the mail and downloading it before you can see it via the web portal.   Might want to do that just as an experiment.
Another think to try is creating a sub-account for email and see if mail gets delivered to the address.

SSL VPN message "This (client) machine does not have the web access privilege."

Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
   quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
   network 192.168.0.0 255.255.255.0
   default-router 192.168.0.1
   dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny   ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
                UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
   heading "My Intranet"
   url-text "Cisco" url-value "http://192.168.0.2"
   url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
   url-list "MyServers"
   functions svc-enabled
   svc address-pool "sslvpnpool"
   svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!

Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,

I have CD version of Adobe Photoshop Element 9. I have CD version of Adobe Photoshop Element 9. I have purchased the new Macbook which does not have DVD drive. Can I download this software over the web and install using the Serial Number I have. Thanks,@

yes,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

My adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help

my adobe acrobat 7.0 professional keeps telling me that i have to activate - I cannot do this as the information to the web site does not work. please help

Activation no longer works. A replacement download and serial number are available Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Cannot delegate Reporting Services Web access to domain user / group, User does not have required permissions

Hi
I have an SCCM 2012 SP1 CU3 installation on a Server 2008 R2 + SQL 2008 R2.
I'm having trouble delegating Reporting Services Web Access to a standard domain user.
I have followed the instructions from these blogs:
http://blog.coretech.dk/kea/creating-the-reporting-user-role-in-configmgr-2012/
http://www.wolffhaven45.com/blog/sccm/assigning-users-to-configmgr-reportusers-group-in-sccm-2012/
No matter how I try, I cannot get the reports to show for a standard domain user. In the console no reports are showing and in the web access I get
"User domain\user does not have required permissions........"
The only thing that is consistenly working when I test is to put the AD Group on the Security Role "Full Administrator".
Then everything will show up.
Any ideas on how to troubleshoot this?

Thanks everyone for helping me with tips. I have now solved the problem. It was the permissions from SCCM that did not replicate to the Reporting Server.
In srsrp.log I got these error messages:
Could not retrieve the reporting service name for instance 'MSSQLSERVER'
Invalid class
Could not stop the reporting serviceAfter googling a litte I found these 2 sites with similiar problems:http://social.technet.microsoft.com/Forums/en-US/d4a7f93a-506f-4e3f-b5fc-bd2b087277da/ssrs-permissions-do-not-add?forum=configmanagergeneral
http://www.microtom.net/microsoft-system-center/software-distribution/sccm-2012-reporting-services-do-not-install
So I ran the command for SQL 2008 R2: mofcomp.exe C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof
and BAAM, everything started to work =)
/ALX

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program?

I have a web site built by Yahoo Web Site Builder which does not have a Mac version, is there any compatability between Iweb and the old Yahoo program? If not how do I clear off the old site so as to re publish with Iweb.

iWeb cannot import published files so you would need rebuild the site.
Yahoo hosting is notoriously poor and their tech support is awful. I would suggest you look for new hosting and start afresh. Some pointers for choosing hosting...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html
If you do choose to go this route, transfer your domain name registration away from Yahoo to your new host.

SP 2010 upgrade fails Error C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\config\WEBCONFIG.ACCSRV.XML, does not have element "configuration/configSections/sectionGroup[@name='SharePoint']"

I was upgrading my SP 2010 server to SP1 but at step 8 i get this error. I cleared configuration cache, moved the file out of the folder, got the same file from other farm where upgrade went smooth, but no success yet. I am at loss.
So i have another farm in SP1. As a fall back option i was thinking to move content database on that server and start hosting site there but now i find out pre sp1 content databse cannot be moved to sp1 farm just through content database migration.
Do only choice i have is to build dummy sp 2010 environment, move content database there and do upgrade there and move it to final production environment?
Is there anything else i can do for either upgradeing the current sp 2010 or moving it to new 2010 already on SP1?
Can pre sp1 2010 content db be moved to sp2013 sp1 directly?
Adit

Hi ,
How many SharePoint servers do you have? If you have more than one SharePoint server, you need to install SP1 on all servers in the farm.
Make sure you run SharePoint 2010 configuration wizard using “Run As administrator”.
Please check the log to find more information about this issue.
In addition, here is a similar post, please take a look at:
http://sharepointnomad.wordpress.com/2014/02/23/fixing-sharepoint-2010-configuration-wizard-error-webconfig-accsrv-xml-does-not-have-element-configurationconfigsectionssectiongroupnamesharepoint-or-it-is-invalid/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Reporting Services Webpart - web part does not auto render consistantly

We are on SharePoint 2010 (integrated with Reporting Services)- on several sites we have added the Reporting Services Web Part and with a saved parameter. The behavior of this web part is not consistent. There are times when I open up a site
and the web part will auto render the report. 5 minutes later I can go into the same site, and the web part does not auto render the report. I have to do edit page, or close and re-open the web site. Has anyone experienced this type of behavior.
I've looked for assistance with this issue on-line cannot find anything that specifically addresses this issue.

Hi Karen,
If the parameters have default values in the report, then the report can be rendered automatically.
For this issue, I recommend to verify the things below:
Does this issue occur when you open the page with the web part in a new tab in the browser or go back to the previous opened tab?
Does this issue occur in the server side or client side?
Please add the site to trusted sites in Internet Explorer to see how it works.
Please change another browser to see how it works.
For narrowing down the issue scope, please test with another report and compare the results.
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach security save" line.

Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.

Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave

Web UI does not work after deployment of BBPCRM SP for CRM 7

Hello!
I just applied SP 2 for BBPCRM in our CRM 7 system and after that our web ui does not start correctly.
We can log in and choose a business role, but the we get the following error in the browser
Service cannot be reached
What has happened?
URL http://host.intranet.org:8061/sap_!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"__html__head__title_Logon Error Message_/title__META http-equiv="Content-Type" content="text/html/css"_body { font-family:tahoma,helvetica,sans-serif call was terminated because the corresponding service is not available.
Note
The termination occurred in system CRD with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:K-i:host_CRD_61-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
It does not make any entries in the system log, but I found the following in the ICM log
Thu Mar 12 07:51:02 2009
*** ERROR => URLDecode recognised invalid sign in form field [ictxxfilt.c 248]
*** ERROR => illegal request {00030882} [http_auth.c 494]
Address Offset REQUEST:
Has anbody else encountered this error and how did you solve it?
I'm not really sure it is related to the BBPCRM package, it could be related to SAP WEBCUIF 700 package that had to be applied before BBPCRM SP 2.
Regards
rollo

Hello!
I just solved it!
I found that the SAP/webcuif services was disabled, if it was the SP that caused it or not, I don't know, but when I enabled it everything started to work!
Regards
rollo

Client does not have permission to send as this sender

We have a CRM web application hosted on a server. When a user launches the site, the site provides facility to the customer to send the query into the system using the email. The website provides the filed for the customer to enter customer’s email ID. The
customer email address is used by the system to send the response back.
We are doing a new implementation for SMTP authentication for the emails send into the contact center using a public website. The flow of the system to use the SMTP authentication is:
Customer launches the website.
Customer chooses to send the his/her query using the email from the website.
Website asks for the customer’s address, so that the query can be
answered back to the provided email address say [email protected] .
We have an account configured on the MS-Exchange 2010 say [email protected]
So before sending the email the website system performs the SMTP Authentication using the credentials of [email protected]
Now the system creates the email MIME using the email address provided by the customer on the website i.e. say [email protected].
After successful SMTP authentication for the address [email protected] system starts sending the email.
Here we are facing the issue:
While sending the email if the customer’s address is also configured on the same exchange used by the system i.e. exchange on [email protected] is configured
then website system is able to relay or send the email.
If the customer’s address is not configured on the same exchange used by the system where [email protected] is configured then the system is not able to send the email it results into the error of: “Client
does not have permission to send as this sender [email protected].
In short if the website performs the SMTP authentication then it requires the FROM address configured on the same exchange used for the smtp authentication in the email MIME from address.
Configuration tries:
As suggested on various forums and at Microsoft tech group we tried following things but no success:
Checked the checkbox “Authenticated Users” selected “Accept any Sender”.
Created a new relay and given the IP of the machine hosting the website or trying to send the email
Run the command from the EMC “Exchange management console”
Add-AdPermission -Identity "Default Receive Connector" -User "NT AUTHORITY\Authenticated Users" -ExtendedRights ms-Exch-SMTP-Accept-Any-Sender.

You can create a new connector to which everything is permitted - eg New-ReceiveConnector -Name "Anonymous Relay" -Usage Custom -PermissionGroups AnonymousUsers -Bindings 10.2.3.4:25 -RemoteIpRanges 192.168.5.77

Visual Studio 2012 SharePoint Project Error : The partial project item type does not have a value for this property

Hi,
I am getting this error from visual studio 2012 whenever i try to create the following project types:
- Workflow Custom activity
- Web parts
The error is as mentioned below
"The partial project item type does not have a value for this property"
Due to this the when I add above type of items in my project, they show a red cross icon against them.
Please let me know If have you any solution?

Hi
I had same issue. Below is the solution
Installing
"Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
"http://www.microsoft.com/en-in/download/details.aspx?id=39305")
Hansraj Rathva

While deploying to another server from RM client using build definition i got below error "Package location does not exist or deployer user does not have access"

We have installed RM client in the POC server .
Installed Deployment Agent in Dev server .
We created Configuration stages for POC->Dev.
We created a template with x copy deployer and selected source as build definition.
While releasing we faced following issue ,
The release was success in POC (Where RM client is installed), but in DEV environment (Which is different server)it got rejected because of the error
"Package location(Path) does not exist or deployer user does not have access"

Hi Dhamayandhi
There is quite a bit to do to get RM working successfully. I have a soup-to-nuts guide on implementing continuous delivery with TFS and RM
here.
Cheers - Graham
Blog:
http://pleasereleaseme.net LinkedIn:

"Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it." occurs while deploying from Visual studio

HI,
I get this error "Error occurred in deployment step 'Retract Solution': The solution does not have a WSP file associated with it. " when deploying my project from visual studio 2010 to
SharePoint 2010 site. I tried restarting IIS, but it didn't help. This application used to work fine until the server crashed during the deployment process. All the other applications on the same server works fine also. Any ideas how to fix this issue?
Thanks in advance,
AM

Hi
AM ,
Thank you for your posting!
According to your error message, it says your solution does not have a WSP file associated with it. Take a look at the file system. After you Right Click -> Deploy Solution on the VS Solution, there
should be a .wsp file at <Solution Directory>\bin\<debug|release>.
Also the error can be occurring when the developer try to deploy solutions over pre-existing solutions with material changed in the solution. Go to your Central Administration Site and then
Operations and then Solution Management. Make sure that there not already a solution with the same name deployed or installed there. If there is, remove it and try deploying again.
And you could look in logs and find if there is a below error in ULS log (C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS).
Thank you for your understanding and support.
Best Regards,
Eric
Eric Tao
TechNet Community Support

4.1 Webi Publication does not have Delivery Rules

Similar Messages

Maybe you are looking for