401 Unauthorised Error in SAP BPC Client

Hello Experts,
Recently we have moved to new facility of our company from where we are trying to access BPC Admin client and web url.
We have BPC 7.5 NW version of BPC Server.
In our previous location we had Windows XP workstation with IE 7 and we were able to acess with no problem.
In the new location we have desktops with Windows 7 and IE8. Are there any additional security settings we need to take care of in Windows 7?
Also from both locations we are accessing BPC server through VPN. IS there any additional setting for accessing BPC server through VPN?
Please share some tips for the above issue.
Thanks.

Hi Mak,
Can you please look into SAP Note: 1540512. Here are the excerpts:
Issue was fixed in BPC NW 7.0 SP08 and is schedulled for fix in BPC NW 7.5 SP06
Workaround solution 1 is to attempt to connect with the same user to BPC Admin client once and then try to access web page again
Workaround solution 2:
a. in BW run SE16 and view table UJA_LAST_USER where USER_ID = domain\username
This table defines which system was last accessed by the user
b. Check that application set in APPSET_ID and application in APPL_ID are currently accessible for this user
c. Only if the application set mentioned was removed, please edit both APPSET_ID and APPL_ID to a correct value of an application set and application the user has access to (you can copy the value from another user's).
Hope this resolves your issue.
Rgds,
Poonam

Similar Messages

401:Unauthorised error

Hi All
i uasually get this 401: Unauthorised error. and when i remove the anonymous role from jazn.xml it works fine.
i think that anonymous role causes issue.
is it so?...if not what could be the issue?
Thanks
Edited by: AdfNew-b on May 18, 2012 5:18 AM

Can you please check if your system-jazn-data.xml file is updated with jazn-data.xml data. If not, please update it with the data from jazn-data.xml.
System-jazn-data.xml can be found at: system11.1.2.0.38.60.17\DefaultDomain\config\fmwconfig
Hope this helps.

Installing error. SAP BPC 7.0

Hi Experts,
I am trying to install SAP BPC 7.0 on microsoft platform in this multiserver configuration:
Server 1: Windows 2003 SP2 (US English) Application Server. WebServer. Only SQL Native Client installed.
Server 2: Windows 2003 SP2 (Spanish) SQL Server, OLAP Server, Reporting Services Server. All SQL components installed in Spanish.
Installing process is OK until Creating Appserver process when it keeps much time until an Error message appears. "Unable to create AppServer".
any idea?
Thanks in advance

Hi,
Collation specified into installation guide is required. If it is not right then some of databases or tables can not be created.
Yes SSIS has to be installed into application server is one of prerequisite software.
1433 port is not open then it is possible to have problems with comunication between application server and sql server.
1433 port is used by sql client from application server to comunicate with server.
Make sure you are using a port which is open between application server an sql server.
Port 1433 can be changed into sql server for comunication (this is default one).
So first make sure you have open the ports for SQL and SSAS open between application server and database server.
After that make sure you have the right collation into sql.
Kind Regards
Sorin Radulescu

How do I install SAP BPC client.

Hi,
I installed SAP BPC 7.0 succefully.
I did diaognize on server managerment and there are no errors.
I am trying download the client from http:
localhost\osoft and I get the error as
THE XML PAGE CANNOT BE DISPLAYED..
cannot view XML INPUT USING XSL STULE SHEET.PLEASE CORRECT the error...
the name was start with an invalid character.error processing 'http://localhost/osoft/. line1 position2..
<% Page Langurage='vb' AUTOEVENTWIREUP='FALSE' CODEBEHIND = 'LAUNCH.ASPX.VB'' INHERITS='OSOFT.LAUNCH" CODE PAGE = '65001%>
ANY IDEA WHERE TO CHECK..?''

Hi,
Did you check if you installed every prerequisites on the server?
I particularly think about Anti-Cross scripting library (page 33 of the installation guide), and those kind of tools.
Best Regards,
Patrick

Error in SAP BPC

Hi Experts,
We are facing a strange error while sending data from input Schedule in SAP BPC 7.5 SP08. For Reporting Currency USD, we are able to send data from the input schedule but from reporting currency EUR we are getting the error
"Error running default logic()"..."Error converting records: The root element is missing.
In some of the other schedules, we can send data for EUR and not USD.
Am i missing something?
Thanks in advance

Hello Appu,
Do you have something in default script logic? Revise it in the admin consol Default.LGF inside the application and scripts logic, and delete the code include. Always if you don't need to use it.
By defect SAP BPC include some code there and you must delete it and save the changes.
Regards,
Gabriel Garcia

MDX Statement error in sap bpc 10.1 admin when opening a report

I have restored a previously created environment that was built on the sap bpc 10.1 platform and am receiving the following errors when accessing my reports and clicking refresh. I also received an error when restoring the environment that says "Error occurred in expanding member formula". I don't believe these would be related but I am unable to access the member formulas in the model. I am however able to access all dimensions, etc. I am not able to create any new reports though. Any ideas on a solution.

Hi Kudzai,
The error you're getting in BPC 10.1 is because the environments were migrated from BPC 10.0 or older version using transaction UJBR and it was not migrated to 10.1 after the restore.
SAP Note 2052538 provides resolution for this. Please follow the instructions of Upgrade Guide for BPC NW 10.1:
Execute migration program UJT_MIGRATE_100_TO_101 to migrate 10.0 data to 10.1 if the restored environment was backed up from a BPC NW 10.0 system
Execute migration program UJT_MIGRATE_75_TO_101 to migrate 7.5 data to 10.1 if the restored environment was backed up from a BPC NW 7.5 system
Thanks
Rajesh

Data Manager Package Error in SAP BPC 10

Hi All,
I am getting below error message while running the Data manager package /CPMB/LOAD_INFOPROVIDER in SAP BPC 10. Screenshot is attached for your reference. Please help in solving this issue.
Thanks & Regards,
Ramesh.

Hi Vadim,
Please find the Advanced DM Script of Copy Package.
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,%TARGETMODE%)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)
Thanks & Regards,
Ramesh.

Error installing SAP B1 Client on Windows 7

Hi ,
after having installed by mistake a PL not supported on Windows 7 , i have uninstalled B1 Client , and reinstall after updating the server ( 2007 / SP01 /PL07 ) .
i managed to install , but B1 is unable to connect to SAP Server . when i click "change company" on the first screen ,i saw only "MSQL" in the list box , and no MSSQL2005 . when i try to "Change Server" , and after "OK" , server is not updated in the main screen , and i have the following message in the log :
"Error renaming SQL driver to MSI executable"
have you any idea ?
thanks
Laurent

Hi
thanks for all your replies .
i think my question was not correctly written : the server is ok , mssqlserver 2005 is ok , all the clients managed to connect to this server .
i only have a problem on this windows 7 client .
regards ,
laurent

SOAP - HTTP 401 Unauthorised error

Hi,
THe scenario is FILE - XI - WEB SERVICE.
My SOAP receiver communication channel throws the following error:
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 401 Unauthorized"
If I try to send the data through XML SPY I get the same 401 exception. But when I open the portal through browser with the same user ID and password ,it opens the portal view.
Please suggest
Thanks,
Tiny

Hi Tiny,
Any of the following could be the reason:
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Regards,
Divya

Import package error in SAP BPC 4.1

Hi,
Can anyone please assist.
I tried running the import package several times on bpc ver 4.1 without aby success. I even tripple checked Users and Security and it validated successfully but the package still crashes in the middle of processing.
The error message read:
[Package Result = Error]
Package:                    Import
Appset:                       CQS
Application:                 FIXEDCOST
Request Time:             2009-06-23 13:44:42
Start   Time:                2009-06-23 13:44:42
End     Time:               2009-06-23 13:48:51
Total   Time:                00:04:09
TOTAL STEPS 3
1. Assign initial parameters:        completed in 0 sec.
2. Convert data:                     completed in 7 sec.
3. Load and process:                 Failed in 241 sec.
[Selection]
FILE= DATAMANAGER\DATAFILES\CQSSA\2009\Fixed Costs Testnew.txt
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\CQSSA\FC_Trans_ZA_ACT.xls
CLEARDATA= Yes
RUNLOGIC= No
[Member Selection]
CATEGORY: ACTUAL
ENTITY: SQSSA
TIME: 2009.MAY
[The list of conversion file in each transformation file]
Transformation file: DATAMANAGER\TRANSFORMATIONFILES\CQSSA\FC_Trans_ZA_ACT.xls
     - Conversion file : ConversionFiles\CQSSA\FC_CONV_ZA.XLS!FCOSTACCOUNT
     - Conversion file : ConversionFiles\CQSSA\FC_CONV_ZA.XLS!FCOSTCENTRE
     - Conversion file : ConversionFiles\CQSSA\FC_CONV_ZA.XLS!MARKETS
[Messages]
FIXEDCOST
Failed
Submit Count : 15278 (Record count in source file : 20056)
Accept Count : 0
Reject Count : 15278
You do not have WRITE authority.::ACTUAL
Where can I enable WRITE authority?

Hi Vishal Mahawadhi,
Thank you for replying. I've tried all your suggestions before I even logged the query. I even went to analysis manager, gave access to the application and processed the cube but still that didn't help.
But I noticed that I only have read access when I look at the settings on the roles in analysis manager. The problem is that I can't change the settings to read/write. Version 4.1 is a mess.

Automate template download for SAP BPC client rollout

Hi Experts
Is it possible to automate the downloading of the template and dimension files automatically using a client deployment tool such as Symantec Altiris. We will be deploying to over 3000 clients in a staged approach, but due to the strict bandwidth polices of the client, they want to know if it is possible push down the Outlooksoft folder as well, when installing the client. So that when the client is launched for the first time, it doesnu2019t have to download all of the template files.
Because of the bandwidth policies this needs to be done. CITRIX and Terminal Services is not an option at this stage.
How does the client check that all of the files are downloaded, Does the AppInfo.xml file have any influence in this process check, and what parameter does this check?
Kind Regards and Thanks
Daniel

Hi Daniel,
Appinfo.xml has importance but also some registry key from HKEY_CURRENTUSER-Software-VB&VBA Program settings- Outlooksoft.
BPC is doing comparation between the version from key registry and version from server and if this doesn't match then the info necessary for client like Templates and Dimensions are downloaded.
In your case you would liek to minimize the amount of data download.
That's means you have to keep at minimum the templates download into client.
So the tempates store into Wizard folders for each application must be redouce as much as possible.
Only these templates are download into client side.
The rest of templates are used direct from server and are download only when the users are using it.
I hope this will help you.
Regards
Sorin Radulescu

Error with sap businees client

how to rectify these error

Hi Pramod,
exactly as Julie told: open WebDynpro Application GRFN_SERVICE_MAP in SE80 e.g (edit object / web object / WD. Appl) then simply test it or copy+paste the url of the WD Appl to a browser.
BR
Melinda

SAP BPC installation - Errors during setup in the create database step

Hi! I have a real big problem installing SAP BPC. It's a Microsoft multi-server installation.
I've got two servers: 1) the database server with the SQL Database and Analysis Server 2) the application server with all the rest.
I log on and I installed everything on the servers with a specific domain user: this user is administrator on both servers and even on SQL Server.
My problem occours when I execute the "SAP BPC setup" on the application server: during the "create database" step I receive two errors:
first error pop-up:
Error ([SQL-DMO]This cache contains no result sets, or the current result set contains no rows.)
second error pop-up:
System.Data.SqlClient.SqlException: Cannot open database "ApShell" requested by the login. The login failed. Login failed for user MyDomain\MyUser
After the SAP BPC setup:
- in the SQL Database Engine the ApShell database was created
- nothing for ApShell was created in Analysis Sever
- in the Even Viewer of the database server I've got this error: Login failed for user 'MyDomain\MyUser'.
It's very strange because if from the application server, using "SQL Server Management Studio" (always with 'MyDomain\MyUser'), I connect to the database server: I can login, create and delete databases on the SQL Database Engine and even on Analysis Server without any sort of problem.
To complete my status, I can say you Analysis Sever is on the default port. I use SQL Server 2005 and I even tryed to reinstall it and SAP BPC but nothing change.
At this point I checked these two topics on this forum:
Mulit-Server Install - Installation fails while creating AppServer Database
Problem during BPC installation
1) At first I tryied this solution:
Into multiserver installation guide is specified that actually in case of multiserver environment you have to copy apshell.db9 file from installation kit into db server. Into a drive from where SQL server is able to read when you are doing restore with Management Studio.
During the installation you have to go into advance options and to specified the path (local path from db server where you did the copy of apshell.db9).
but nothing change: the "SAP BPC setup" problem I have still persists.
2) Then I tryed this workaround:
If so, you can try a "restore appset" from server manager. Rename the Apshell.db9 file (or copy it) and name it Apshell.bak
During server manager restore, point only to the Apshell.bak file. Server Manager will tell you that webfolders and filedb files are missing, but it found the webfolders and filedb (again, only if the original bpc installation successfully created those folders)- and then it will try to restore Apshell.
That may work in spite of whatever problem is keeping the installation program from performing the same tasks.
but the "restore database" fails > I've got the error written in red: OLAP database - fail
What can I do to solve the problem? If it is necessary, I can reinstall SQL Server and SAP BPC but I need to know the way to solve the setup error.
Thanx very much in advance for your kindness if you can help me.

Thanx very much to everyone for the kind support. Unfortunatly, my problem persists.
- SQL server is EE.
- I installed SQL server (including SSAS) using MyDomain\MyUser.
- MyDomain\MyUser is windows administrator on both servers.
- MyDomain\MyUser is SQL Server and SSAS administrator.
- SSAS service is running under the same service account than the SQL Service.
- All my MSSQL services runs as Local System.
- I'm installing SAP BPC using MyDomain\MyUser.
- I also checked the SSAS service account specific rights to the SSAS data folders.
SAP BPC installation still fails exactly as above (popup errors during SAP BPC setup, no ApShell etc. etc).
In the database server, windows event viewer errors after the unsuccessful installation are:
1) SOURCE: MSSQLSERVER
Failure Audit: Login failed for user MyDomain\MyUser
2) SOURCE: MSSQLSERVER
BackupDiskFile::OpenMedia: Backup device 'MyPath' failed to open. Operating system error 5(Access is denied.).
As regard as point 1: The Failure Audit error into the event viewer happens only during SAP BPC installation. Otherwise it is always Success Audit.
Also, as I told you, if from the application server I connect with SQL Server console to SSAS, located on the database server, using MyDomain\MyUser: I can create delete SSAS dbs without any sort of problem.
For point 2:
I tried 4 differents SAP BPC installations as follows:
- to go into advance options and to specified the path (local path from db server where I did the copy of apshell.db9).
- to go into advance options and to specified the path (local path from application server where is the copy of apshell.db9).
- to go into advance options and to specified the path (network path of a share folder with apshell.db9 and permissions to everyone)
- to don't go into advance options and to don't specify the path.
but every time nothing change: the "SAP BPC setup" problem I have during my initial post still persists. In the same way I written at the beginning of the topic.
I don't know how to solve it.
Edited by: Francesco Andolfi on Jan 5, 2011 6:37 PM

HTTP Sender Adapter 401 Unauthorised

Hi,
I am using a sender HTTP Adapter of PI 7.1
when I use the link in browser it gives me 401 unauthorised error.
but when i use the test tool from one of the blogs it gives me the response properly.

The link is
http://<host>:<port>/sap/xi/adapter_plain?namespace=http%3A//rediff/ProjectSTAR/Vendor&interface=SI_SYN_OU_TO_TO_SAP&service=BS_VENDOR&party=&agency=&scheme=&QOS=BE&sap-user=piappluser&sap-password=redi#pid12&sap-client=210&sap-language=EN
This link when I copy paste in browser leads to a login popup asking for credentials.
When I enter the proper credentials , It gives 401 error .
Same happens when I use it in a Java code for HTTP connection.

Cannot maintain dimension members in SAP BPC

Hello, Masters in BPC
I have just create mention and want to input data, I used maintain dimension members CUSTOMER in SAP BPC but It seem not effect although I press Process dimension already and I open excel and paste data also saved them already. When I open other dimension and reopen CUSTOMER but nothing is shown.
Please give me a advice to resolve the problem.
Thanks you so much.
Best Regards
Chinh

Dear Raju,
Yes, I did it some times but nothing is happen,
I maintain dimension members, I did it as below:
- Choose maintain dimension members
- copy data from excel file and paste into the dimension
- click process dimension
Show a dialog
- Uncheck Take system offine
This task is successful.
but I go to dimension ACCOUNT in order to insert data,
I came back maintain dimension members : CUSTOMER but I see no data is displayed.
It is the same for ACCOUNT when I want to see data on that dimension
when I try one more time , I click save to server, The Error message show that : Dump Error
I reinstall BPC client and its patch but nothing to change
How can I do???
Thanks

401 Unauthorised Error in SAP BPC Client

Similar Messages

Maybe you are looking for