5.1 not working, please he

I recently bought a new computer, with an Audigy2 ZS soundcard. In my old computer I had an Audigy-card.
I?m using my old Creative Inspire 5. Digital 5500 speakers which also has an external Dolby Digital Decode Device.
I?ve used these speakers for 2 years with my audigy-card without any problems. Been using the Digital Output to connect my speakers and always had 5.-sound.
But I can't get 5. to work with the Audigy2 ZS-card. It works when i switch to the old computer with the SB Audigy!!!
I?ve got the latest Audigy2 ZS drivers and have 5. speakers and digital output enabled....why isn?t it working? I only get sound from front left and front right speakers.

MANY people will have this problem, because creatives manuels aren't clear (enough!)
I know this is old, but for what it's worth (read my post about this) the Creative manuals are very unclear, recommanding a 4pole minijack-to-DIN (won't work) and 4pole minijack-to-minijack (won't neither)What you need it a 4pole Minijack-to-RCA (female) to connect the coaxial cable (RCA-to-RCA) from the extrenal decoder to the soundcard.Creative was so smart to put a 2-pole Minijack-to-RCA in the Inspire 5500 speakerset, which will only have the Front L/R available via digital output on the Audigy 2 SZ.
The 4 pole will add for Rear L/R and for Subwoofer/Center
ONLY in the Inspire manuel (thick one) is where you can read this. The Audigy 2 SZ card provides the 2 other options mentioned, but both will NOT work (at least on the Inspire 5500) since . The DIN output on the sub is used to connect it to the external decoder, so a minijack-to-DIN would leave your external decoder (and volume/input/mode control) a nice decoration piece and 2. 4pole minijack-to4pole minijack?!?!? There is only minijack (digital out on the 2 SZ card) so how they can ever recommand this to hook it up to the coax (digital) input on the external decoder......

Similar Messages

  • IPhone 6 pin or fingerprint not working please help me asap

    i phone 6 pin and finger print not working please help

    Howdy Karan sood,
    Welcome to Apple Support Communities.
    It sounds like you’re running into an issue unlocking your iPhone because Touch ID and passcode aren’t being accepted.
    Take a look at the article linked below, it provides troubleshooting suggestions that’ll resolve most Touch ID issues.
    Use Touch ID on iPhone and iPad - Apple Support
    Get help with Touch ID
    Make sure that you're using the latest version of iOS.
    Make sure that your fingers and the Home button are clean and dry.*
    Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
    If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
    Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
    Try enrolling a different finger.
    If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
    * Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
    And, this article provides tips that’ll help resolve passcode issues.
    iOS passcodes - Apple Support
    Forget your passcode?
    If you or someone else enters the wrong passcode too many times, your device will disable itself temporarily. Get help if you forgot your passcode or your device is disabled.
    Learn what to do if you forgot your Restrictions passcode.
    I hope this helps,
    -Jason

  • HT201412 my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help

    my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.

    Sounds like it may be a hardware issue.
    Please contact Apple Support in your country.
    Here is a list of numbers: http://support.apple.com/kb/HE57
    Regards
    J

  • I have installed adobe flash player on my computer and this is not working please help

    I have installed adobe flash player on my computer and this is not working please help

    What is your operating system & version?
    What is your web browser?
    What means "not working"; what do you see instead of the expected Flash content?

  • I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

    I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

    I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

  • I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

    I live in South Africa, and I had the same problem with my iPhone 4.
    After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
    ***** that i cant use Find my iPhone, but atleast i can use my phone.

  • I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

    I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

    If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
    Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
    Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

  • HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

    this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
    is there any other method to download ios 6.1.2.
    my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
    kindly help.
    thanks

    well in thatcase, i need another help .
    thanks for your instant reply.
    i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
    because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

  • Updated my iphone 3gs, lost my music and apps, they are backed up on itunes, how do I move them back to my phone, tried to sync but not working, please help

    Updated my iphone 3gs, lost my music and apps, they are backed up on my computer but i cannot move them over to my phone, tried to sync but not working, please help

    well first make sure that when you click on the name of your iphone on the left hand side of itunes that you go to the app and music tab and check mark the sync apps and sync music. then try clicking apply in the bottom right hand corner. then if not try doing it again after going to prefrences in the top menu and going to devices tab and click reset sync history if that doesnt work with music try and drop and drag to the name of your iphone, lastly if that doesnt work you can try restoring from a backup from before you updated. it will keep the new software but put everything that was on your phone when you created the backup back onto your phone.
    http://support.apple.com/kb/HT1351 for syncing music

  • While updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

    while updating 4.0 version to 5 version system shows sim card is not valid. My iphone is not working .Please help me

    I would imagine your iPhone was hacked to make it work on your local carrier.
    Updating the iOs to 5.xx will lock it back to the original carrier .The carrier holding the lock are the only
    entity able to authorise the unlock .You will have to contact them and see if they unlock and the terms the apply

  • HT1414 my handsfree is not working please help me

    Hi There!
    I am using Iphone 4s and ny handsfree in not working please help me

    Try restarting you iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo. 

  • HT201320 I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

    I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

    Contact the email provider and obtain the correct setup information.

  • The built-in mic in g50 122ca laptop model is not working. please help me out.

    the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)

    here is a sample code .
    so far you procedure looks good but
    i bet you have to specify the name of report , instead of 'filename'.
    see this
    Plist_id := GET_PARAMETER_LIST('P_name');
    IF NOT ID_NULL(Plist_id) THEN
    DESTROY_PARAMETER_LIST(Plist_id);
    END IF;
    Plist_id := CREATE_PARAMETER_LIST('P_name');
    ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
    -- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
    -- here Pro_License is the name of report.
    did you tried to see if the parameter passed using a message ?
    try
    message('parameter name'); pause; write this before "run_report".

  • My itnues for pc is not working :( it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

    my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me

    Please helppppp

  • I just bought my I pad 2 and im trying to charge it via a USB cord connected to my Dell.  It's not working please help

    I just bought an I pad 2 and im trying to charge it via a USB cord connected to my Dell.  It's not working please help

    Not all USB ports provide enough power to charge the iPad. It may charge very slowly while the screen is off. Charge it using the included charger and you should be fine.

  • TS1559 hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help

    hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help

    Thank you. I will try your tip. And if it works, I'll give you 10 points . But now its been charging for hours and its still the same . But thank you!

Maybe you are looking for

  • Delivery address in Third party process.

    Dear All, I have one query in third party process. Created third part sales order,where PR is generated automatically.Based on PR (purchase requisation) created Purchase order. When I select item category S-Third party,system will pick the delivery a

  • Robohelp 10 output  in Firefox and Chrome

    Hi, We have recently purchased Robohelp 10 and generated output in Webhelp Pro. Then we tried to integrated with our applications locally. We found it is not working properly in Firefox and Chrome. We have gone through the javascript code and found t

  • Trying to edit a pdf - Is there a strikeover key for existing text to line through text without deleting the orignal text?

    I need to strike through existing text on a PDF I am trying to edit.  strikethrough like this but I cannot seem to locate this key  on the page where I am editing the pdf in adobe. Where do I locate this?

  • Count Number of Month

    Hi all, I have these following column : start_cycle_date = 1 Jan 2010 end_cycle_date = 1 Jan 2011 I wanna count the total months left everytime i run the query (frequency run = monthly, 29th everymonth). The total month is 12 months. After run start_

  • Increase font size in Finder ?

    Is there any way to increase the font size above 16 point in the Finder, and/or of the menus of Apple apps such as Safari (tabs, etc) and iTunes lists? Either in 10.4.11 or 10.5.7 or both.