5.3 CUP Approver not found error

Hi Experts
Having an issue on CUP. I have created a CAD for my first stage and second stage.
1st Stage (Business Process Owner) HR and linked to approver
2nd Stage (Role type) = Single and linked to approver.
The request is created but when I approve the request at the 1st stage it throws out the the Approver not found error. The role attributes have also been configured accordingly.
Any ideas Experts your help will be appreciated.
regards,
Donovan

Hi
Thanks for the assistance, I've checked on the UME the approver does exist with the necessary authorizations. Maybe it issomething in the config please tell what you did maybe I missed something small in the config. I checked and the CAD in both stages are linked to approvers and they both exist in the ume. And the role itself has been linked with the attributes such as the business process and the role type being single.

Similar Messages

AE Approver not found error

Hi All
I have confirmed and configured the custom approver determinator for this i have allso configured the approver under roles
in the attributes section
at business process level.
This is the error below!
Failed to Process your request, Configuration Error, Approvers not found for the following : system_role name
Any assistance on this matter will be appreciated!

Hi Rodger,
I quite sure that when you set up the custom approver based on role it then does not refer to the approvers linked to the role - although I think you should test the following.
Maintain the custom approver you have set-up, click on approvers > add > insert the role name > click on the arrow > then click on the + icon and search for an approver > add > save. Then create a request to see if the approver can be found.
I think that if you want to make use of the approvers that you have loaded in the role attributes then you would use Role as your approver determinator in your stage and not the custom approver determinator that you created.
Regards

Approver not found error while configuring workflow in CUP

While I am configuring SAP CUP workflow,
Once I create a request and sent it to approve, I am getting the message stating Approver doesn't exist.
Any help will be appreciated in this regard.
Regards

Looking at your posts here so far (8 unresolved out of 10) I'm getting the impression that you're trying to learn how to configure a full Access Control solution without a) having read the documentation or b) having had any kind of training.
May I suggest you take a start with a) or/and b) instead?
Frank.

GRC CUP Error creating request. Approver not found

Hi,
We just upgrade from GRC CUP 14 to GRC CUP 15.6 support pack.I already performed post upgrade steps and when i try to create a request i am getting approver not found.i didnot change workflow.In stage for role approver we have approver determinator "role".
system log report
com.virsa.ae.workflow.NoApproverFoundException: No approvers found for req no : 493, for reqPathId, 662, for path, PROD_APPRV_PATH and approver determinator : Role
     at com.virsa.ae.workflow.bo.WorkFlowBOHelper.handleApproversTransactions(WorkFlowBOHelper.java:1469)
     at com.virsa.ae.workflow.bo.WorkFlowRequestCreateHelper.handleWFForNewPath(WorkFlowRequestCreateHelper.java:278)
     at com.virsa.ae.workflow.bo.WorkFlowRequestCreateHelper.createNewWorkflow(WorkFlowRequestCreateHelper.java:167)
     at com.virsa.ae.workflow.bo.WorkFlowBO.saveNewWorkflow(WorkFlowBO.java:120)
     at com.virsa.ae.accessrequests.bo.RequestBO.saveNewRequest(RequestBO.java:579)
     at com.virsa.ae.accessrequests.actions.CreateRequestAction.createRequest(CreateRequestAction.java:381)
     at com.virsa.ae.accessrequests.actions.EUCreateRequestAction.createRequestHandler(EUCreateRequestAction.java:135)
     at com.virsa.ae.accessrequests.actions.EUCreateRequestAction.execute(EUCreateRequestAction.java:68)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:295)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:431)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Please let me know solution ASAP.This is high priority.
Thanks
Yakoob.

It looked like some old request stuck in DB.But, not sure about it.I tried by changing the number ranges in configuration by giving the current request number in "from number",but it didn't work.
This is strange some time it gives "error creating request: path not found." and once this error gone then "error creating request : approver not found".
To avoid this i created one more stage by custom approver determinator with application attribute and approver assiged.This stage, i assigned before role approver stage then it worked,Request get created and request get provisioned.
i don't understand why it's not working,if i assigned role approver stage first in a path of workflow.role approver (approver determinator:"role" standard one, "approver" gets from configuration:roles:create role:role approver OR upload from role import).
Please help
Thanks
Yakoob.

CUP Issue in workflow - Approver not found after SP13

Dear All,
We are facing an issue after upgrade to SP13 in CUP. The request is not getting saved and throwing an error - Approver not Found.
We uploaded the xml files also of SP13 after upgrade has completed.
We have not changed the workflow after upgrade and verified all the attributes of Initiator, CAD and approver is already available in CAD - but still we are receiving the error "Approver Not Found"
The same workflow is working succesfully in Production system which is under SP9.
Is this an issue with SP13. If any body has encountered please let us know how to resolve.
Thanks and Best Regards,
Srihari.K

Dear Chinmaya,
Below is the error log
Log :
2011-05-09 08:13:17,375 [SAPEngine_Application_Thread[impl:3]_25] ERROR NoApproverFoundException in Save request
com.virsa.ae.workflow.NoApproverFoundException: No approvers found for req no : 135, for reqPathId, 209, for path, CHNG_ANZ_Z6 and approver determinator : ANZ_LAC
Also, we tried with simple workflow as well with just 2 attribute logic. Still we received the same error
Thanks and Best Regards,
Srihari.K

SPM in CUP in a SAP GRC AC 5.3 -- "Approver not found" & "Path not found"

hello,
I have a problem when I try to do a request.
I have configured the SPM in the CUP in a SAP GRC AC 5.3
I gives me an error about "Error creating request. Approver not found ". When I took out the Manager in the Stage it gave me this error in the request "Error creating request. Path not found".
Best regards.
Pablo Mortera.

You can either type in the configuration, like the what option you selected for approver (CAD or role or...etc), or other way is to capture the change log which shows what was the configuration for that stage....
(Configuration -< Change Log -> Search Change log)
Cheers !!
Zaheer

RAR Error- Approver not found

Dear Experts,
I am facing following problem in RAR component.
When i am changing Function associated with Risk Id. It gives me error Approver not found.
What is to be done to tackle above error ?
Rgds,
Saurabh

Dear Saurabh
Have you configured the workflow in CUP to handle the 'Risk Maintenance' in RAR? If not so, please configure the workflow or check for the Custom approver derminator (CAD) in the workflow in CUP, if it is already configured.
Alternatively, if you do not want the workflow to be triggered for changes you make in the Risk, then disable the work flow function, @ RAR - CONFIGURATION TAB-WORKFLOW-RISK MAINTENANCE-CHOOSE OPTION NO.
Regards
Swarna

MSS: Approve working time Program "       " not found error

Hi,
I am able to enter working time and release in ESS. CAT2, CAT4 and CAT6 are also working fine. Im using the Approve Time sheet data iView in MSS to approve working time. Im not sure if I did all the required configuration in IMG Approve working time.But when I click the iView I get a Java exception as shown below. Pl find the ST22 dump also. Can you please let me know
1. What could be the problem.
2.What are minimum configuration to be done in IMG Approve working time.
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Program                                          not found., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.rfcExecute(FcCatApprove.java:307)
     at com.sap.xss.hr.cat.approve.blc.FcCatApprove.init(FcCatApprove.java:276)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApprove.init(InternalFcCatApprove.java:200)
     at com.sap.xss.hr.cat.approve.blc.FcCatApproveInterface.onInit(FcCatApproveInterface.java:136)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface.onInit(InternalFcCatApproveInterface.java:133)
     at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface$External.onInit(InternalFcCatApproveInterface.java:313)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.hr.cat.approve.vac.dd.VcCatApproveDrillDownList.onInit(VcCatApproveDrillDownList.java:
ST22 dump
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "BUILD_TABLE_STRUCTURE" "(METHOD)", nor was it propagated by a
     RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely " ".
However, program " " does not exist in the library.
Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
Regards
Srini

Starting a new thread

AE 5.2 - Detour Workflows - One of the Role Approver not found

Hi All,
My question is regarding using the Detour workflow functionality for the situation below - pls let me know if this possible or if any alternates are available.
- Main path has 2 stages (1) manager approver, (2) Role Approver.
If the Requestor asks for a Role that Does not have a Role Approver we would like to route this request to the Security lead.
- I have created a Detour Path with 1 stages - Secuity lead and associated with Stage 2 (Role approver) of the Main path based on the condition "No Role Owners"
- I still get the error "Approver not found at Stage @@@@"
Is the condition "No Role Owner" in the Detour workflow config for "Role Expert" workflows or for Access requests?
Is it possible to route the Request to Security if the Role being requested does not have a Role Approver? IF yes How?
thanks
T

Hi,
sometimes in the Detour configuration you have the problem that the "Save" action is not saved properly.
If this entry is empty, please go into edit mode and save the detour config again, so that the action will actually display "Save".
Hopefully it works, then.
Regards,
Daniela

AE: Path not Found error

Hi All
When we create one workflow with one role requested the approval process works, but it does not work when we have one request for 2 roles from 2 different systems. Take note that on their own these roles create a workflow and the approval process works but when they are put together the "Path not found error" appears.
Can anyone please advise on what the problem might be?
Any input would be appreciated!

Rodger,
please have a look at the error log to see exactly what fails.
I suppose that your initiator is limited to role + system, and you do not have defined a path for the second system, so AE does not know how to handle that part of the request.
If you can detail what your initiator looks like, and what the error log says, we may be able to give you more detailed help.
Frank.

Overview of Leave --- CREATE OBJECT: The class was not found., error key:

Dear Gurus,
Iam facing this problem that, when i try to open the Leave Overview from the leave request screen. it gives the dump with message
CREATE OBJECT: The class was not found., error key: RFC_ERROR_SYSTEM_FAILURE
this also creates a dump in the back end.
The same dump is appearing when i try to view the Check Documents for the same employee from PTARQ.
Thanks in advance
Ramnath

Hi ,
please find the following solution .it will definitely work .
If you leave configuration is done.
There was an incorrect data in your system. To do these please follow following process.
delete this request using
PTARQ> Delete documents (RPTARQDBDEl)
Please read the report documentation before
deleting the request but it should be safe as it is
a development system.
Please delete this with the above information or delete all
the records for the approver.
After this,, there will be some incorrect workitem in approver inbox.
You need to clear that also by Tcode - SWWL.
ALSO check the leave request workflow of that employee and if there is any error workflow lying in the workflow delete the leave request (which was created with error) Note down the id initiater ( which had error) and in the Test Environment for Leave request (PTARQ) gave the PERNR and delete the documents ( give the id iniater in the document status ).
To check the error work flow go to SWIA and check for that Workflow (Leave) raised by the PERNR at that duration ( check in IT2001 for the duration) and give it here.
After deleting it check in the portal for the leave request if any error is occuring when trying to apply for leave.

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

Private Key Not Found Error in Ldaps

Hi,
I am facing "Private Key Not Found" Error in ldaps. The key and the SSL certificate is stored under the same location. The certificate is self signed certificate and in .pem format. When I am trying to install the certifcate through SUN ONE Console it throws the following error
"Either this certificate is for another server, or this certificate was not requested using this server".
can any one help me in this regard.
Regards
Senthil
Edited by: senlog80 on Dec 30, 2008 3:18 AM

Or even better, check the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=924320&_NLANG=E">924320</a>.
Symptom:
When you execute a query with virtual characteristics or key figures, the system issues the following error message:
Object FIELD I_S_DATA-<key figure> not found
Other terms
RSR00002, RSR_OLAP_BADI
Reason and Prerequisites
This problem is caused by a program error.
Solution
If the virtual characteristics or key figures are implemented using the enhancement RSR00002 (CMOD), implement the corrections.
If the virtual characteristics or key figures were created directly as implementations of the RSR_OLAP_BADI BAdI, compare the source code of the INITIALIZE method with the corresponding source code example. During the call of GET_FIELD_POSITIION_D, <L_S_SK>-VALUE_RETURNNM must be transferred instead of <L_S_SFK>-KYFNM.
Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch 08 or SAPKW70008) into your BI system. The Support Package is available when Note 0872280"SAPBINews BI 7.0 Support Package 08", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide advance information, the note mentioned above may be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Assign pts if helpful.

I have a nidaq32.dll not found error. If i have already tried replacing the visa32.dll what else can i try?

I am working with VB6 on an application involving a PCI-6711 Analog output card. I now am in the phase of working on the install file. I have developed this application on an XP machine, and i am trying to install it on a Windows 2000 machine, but i get a "nidaq32.dll file not found" error when i try to run my program on the 2000 machine. I have looked in the System32 folder and nidaq32.dll is in fact in the folder. I am wondering if my install file (created using INNO installer) didn't register the file correctly, of if it has to do with the driver i am using on the PC. I have NIDAQ 6.9.3 installed on the 2000 machine and NIDAQ 7.2 installed on my XP machine.
Any help would be appreciated.
Thanks,
Gerry

Hello GVanhorn,
The problem seems to be that you have different drivers in the systems. You might want to use the same version of the driver in both machine since that will install the same version of the nidaq32.dll.

File not found error from scheduler

Hi,
We have a scheduler file with .cfa extension in the cf scheduler which trigger some mails to certain recipients on execution.
At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
path. On direct execution of the given url, the file is executed successfully and mails are fired.
But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
found the error message 'File not found'.
Is it possible that the file get executed when directly browsing the url and shows 'file not found' error
while executing via cf scheduler?(CF 8 is used.)

To be more specific,
the url format given in the cf admin scheduler is like this:
"http://www.domainname.com/myfolder/myfile.cfa"
A file path to log the output is also given to publish.
If we copy the above url to a browser and execute, the file gets executed and mails are fired.
If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
showing error '/myfolder/myfile.cfa' file not found.

5.3 CUP Approver not found error

Similar Messages

Maybe you are looking for