$5 Starbucks card to first successful answer: how to import midi timecode into Logic Express 9 from Roland VS-880 or Ensoniq ASR-10

I will literally mail a $5 Starbucks card or gift $5 via paypal to the first person whose response gets me success.  Then after all responses are provided and I'm successful with my issue, I'll also raffle off $5 to one of ALL respondents by random pick. 
Problem/question:
I can't figure out how to import midi timecode data from either an Ensoniq ASR-10 or Roland VS-880 Vxpanded into Logic Express 9, so I can then use Logic Express 9 as the master.  No manuals seem to explain that; I just can't find it.
Background/basics:
1.  My ultimate goal will be to move all midi data from the Ensoniq ASR-10 floppies and all digital audio files from the VS-880 into Logic Express 9.  Once the midi timing is imported into a Logic Express 9 file, I'll import the data from the Ensoniq & Roland via steps 2a & 2b below.
1a.  Ten years ago I somehow (am in the process of re-learning what I did 10 years ago) imported the midi timing into the Roland VS-880 Vxpanded from the ASR-10, and then used the VS-880 as the Master to control the ASR-10.   So my current status is that I use the Roland VS-880 as the master, and the Ensoniq ASR-10 as the slave.
2.  FYI for anyone who might be in the same boat, wanting to transfer stuff from an Ensoniq ASR-10 and Roland VS-880 to the computer:
2a.  I will import all midi sequence data from my ASR-10 floppy disks via a utility purchased here, which will all a PC to read Ensoniq-formatted disks, and then just hopefully cut/paste midi files into Logic Express 9 (FYI only):  www.chickensys.com
2b.  Then will import all the individual WAV files from my Roland VS-880 to Logic Express 9 using a method learned here (FYI only): http://www.vsplanet.com/ubbthreads/ubbthreads.php?ubb=showflat&Number=985974&PHP SESSID=b1d2f57be4a1d37d49787400213b22df
2c.  I'll then combine them all into Logic Express 9.
So - how the heck do I capture/import the midi timecode into Logic from either the roland or ensoniq using midi?
I'm don't think that cutting/pasting the midi data into a Logic Express 9 sequence file (step 2a above) will do that, because there are all kinds of tempo & time signature changes in the midi files unfortunately.
THANK YOU and Merry Christmas!!
Andy

OK doesn't look possible.  Closing discussion. 

Similar Messages

  • How to import midi files into garage band for ipad

    I have the newest iPad and installed Garage Band.  I don't have a MAC computer, only Windows machines.  I want to use the iPad to send the midi files to a Roland 150 keyboard to make it play the music.  Is this even possible?  The Roland has Midi In and Out ports and I have the camera adapter kit and a Yamaha UX16 USB to Midi cable.

    You cannot export midi files from GarageBand, sorry. You can only share audio files in aac-format or GarageBand project files, and both are not midi. See what is currently supported: http://help.apple.com/garageband/ipad/1.2/index.html#chsec12c387
    Regards
    Léonie

  • HT5312 I forgot the security que answer how i can reset them to can buy anything from my account on app store

    Hi
    I I forgot the security que answer how i can reset them to can buy anything from my account on the store

    Didn't the link to contact the iTunes Store staff in the 'Additional Information' section of that article work for you? If you don't already have a valid rescue email address, only Apple itself can reset the questions.
    (90159)

  • How to import csv data into Oracle using c#

    Hello,
    How to import csv data into Oracle using c #. Where data to be imported 3GB in size and number of rows 7512263. I've managed to import csv data into Oracle, but the time it takes about 1 hour. How to speed up the time it takes to import csv data into oracle. Thank you.
    This is my code:
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Diagnostics;
    using System.Threading;
    using System.Text.RegularExpressions;
    using System.IO;
    using FileHelpers;
    using System.Data.OracleClient;
    namespace sqlloader
    class Program
    static void Main(string[] args)
    int jum;
    int i;
    bool isFirstLine = false;
    FileHelperEngine engine = new FileHelperEngine(typeof(XL_XDR));
    //Connect To Database
    string constr = "Data Source=(DESCRIPTION=(ADDRESS_LIST="
    + "(ADDRESS=(PROTOCOL=TCP)(HOST= pt-9a84825594af )(PORT=1521 )))"
    + "(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=o11g)));"
    + "User Id=xl;Password=rahasia;";
    OracleConnection con = new OracleConnection(constr);
    con.Open();
    // To Read Use:
    XL_XDR[] res = engine.ReadFile("DataOut.csv") as XL_XDR[];
    jum = CountLinesInFile("DataOut.csv");
    FileInfo f2 = new FileInfo("DataOut.csv");
    long s2 = f2.Length;
    int jmlRecord = jum - 1;
    for (i = 0; i < jum; i++)
    ShowPercentProgress("Processing...", i, jum);
    Thread.Sleep(100);
    if (isFirstLine == false)
    isFirstLine = true;
    else
    string sql = "INSERT INTO XL_XDR (XDR_ID, XDR_TYPE, SESSION_START_TIME, SESSION_END_TIME, SESSION_LAST_UPDATE_TIME, " +
    "SESSION_FLAG, VERSION, CONNECTION_ROW_COUNT, ERROR_CODE, METHOD, HOST_LEN, HOST, URL_LEN, URL, CONNECTION_START_TIME, " +
    "CONNECTION_LAST_UPDATE_TIME, CONNECTION_FLAG, CONNECTION_ID, TOTAL_EVENT_COUNT, TUNNEL_PAIR_ID, RESPONSIVENESS_TYPE, " +
    "CLIENT_PORT, PAYLOAD_TYPE, VIRTUAL_TYPE, VID_CLIENT, VID_SERVER, CLIENT_ADDR, SERVER_ADDR, CLIENT_TUNNEL_ADDR, " +
    "SERVER_TUNNEL_ADDR, ERROR_CODE_2, IPID, C2S_PKTS, C2S_OCTETS, S2C_PKTS, S2C_OCTETS, NUM_SUCC_TRANS, CONNECT_TIME, " +
    "TOTAL_RESP, TIMEOUTS, RETRIES, RAI, TCP_SYNS, TCP_SYN_ACKS, TCP_SYN_RESETS, TCP_SYN_FINS, EVENT_TYPE, FLAGS, TIME_STAMP, " +
    "EVENT_ID, EVENT_CODE) VALUES (" +
    "'" + res.XDR_ID + "', '" + res[i].XDR_TYPE + "', '" + res[i].SESSION_START_TIME + "', '" + res[i].SESSION_END_TIME + "', " +
    "'" + res[i].SESSION_LAST_UPDATE_TIME + "', '" + res[i].SESSION_FLAG + "', '" + res[i].VERSION + "', '" + res[i].CONNECTION_ROW_COUNT + "', " +
    "'" + res[i].ERROR_CODE + "', '" + res[i].METHOD + "', '" + res[i].HOST_LEN + "', '" + res[i].HOST + "', " +
    "'" + res[i].URL_LEN + "', '" + res[i].URL + "', '" + res[i].CONNECTION_START_TIME + "', '" + res[i].CONNECTION_LAST_UPDATE_TIME + "', " +
    "'" + res[i].CONNECTION_FLAG + "', '" + res[i].CONNECTION_ID + "', '" + res[i].TOTAL_EVENT_COUNT + "', '" + res[i].TUNNEL_PAIR_ID + "', " +
    "'" + res[i].RESPONSIVENESS_TYPE + "', '" + res[i].CLIENT_PORT + "', '" + res[i].PAYLOAD_TYPE + "', '" + res[i].VIRTUAL_TYPE + "', " +
    "'" + res[i].VID_CLIENT + "', '" + res[i].VID_SERVER + "', '" + res[i].CLIENT_ADDR + "', '" + res[i].SERVER_ADDR + "', " +
    "'" + res[i].CLIENT_TUNNEL_ADDR + "', '" + res[i].SERVER_TUNNEL_ADDR + "', '" + res[i].ERROR_CODE_2 + "', '" + res[i].IPID + "', " +
    "'" + res[i].C2S_PKTS + "', '" + res[i].C2S_OCTETS + "', '" + res[i].S2C_PKTS + "', '" + res[i].S2C_OCTETS + "', " +
    "'" + res[i].NUM_SUCC_TRANS + "', '" + res[i].CONNECT_TIME + "', '" + res[i].TOTAL_RESP + "', '" + res[i].TIMEOUTS + "', " +
    "'" + res[i].RETRIES + "', '" + res[i].RAI + "', '" + res[i].TCP_SYNS + "', '" + res[i].TCP_SYN_ACKS + "', " +
    "'" + res[i].TCP_SYN_RESETS + "', '" + res[i].TCP_SYN_FINS + "', '" + res[i].EVENT_TYPE + "', '" + res[i].FLAGS + "', " +
    "'" + res[i].TIME_STAMP + "', '" + res[i].EVENT_ID + "', '" + res[i].EVENT_CODE + "')";
    OracleCommand command = new OracleCommand(sql, con);
    command.ExecuteNonQuery();
    Console.WriteLine("Successfully Inserted");
    Console.WriteLine();
    Console.WriteLine("Number of Row Data: " + jmlRecord.ToString());
    Console.WriteLine();
    Console.WriteLine("The size of {0} is {1} bytes.", f2.Name, f2.Length);
    con.Close();
    static void ShowPercentProgress(string message, int currElementIndex, int totalElementCount)
    if (currElementIndex < 0 || currElementIndex >= totalElementCount)
    throw new InvalidOperationException("currElement out of range");
    int percent = (100 * (currElementIndex + 1)) / totalElementCount;
    Console.Write("\r{0}{1}% complete", message, percent);
    if (currElementIndex == totalElementCount - 1)
    Console.WriteLine(Environment.NewLine);
    static int CountLinesInFile(string f)
    int count = 0;
    using (StreamReader r = new StreamReader(f))
    string line;
    while ((line = r.ReadLine()) != null)
    count++;
    return count;
    [DelimitedRecord(",")]
    public class XL_XDR
    public string XDR_ID;
    public string XDR_TYPE;
    public string SESSION_START_TIME;
    public string SESSION_END_TIME;
    public string SESSION_LAST_UPDATE_TIME;
    public string SESSION_FLAG;
    public string VERSION;
    public string CONNECTION_ROW_COUNT;
    public string ERROR_CODE;
    public string METHOD;
    public string HOST_LEN;
    public string HOST;
    public string URL_LEN;
    public string URL;
    public string CONNECTION_START_TIME;
    public string CONNECTION_LAST_UPDATE_TIME;
    public string CONNECTION_FLAG;
    public string CONNECTION_ID;
    public string TOTAL_EVENT_COUNT;
    public string TUNNEL_PAIR_ID;
    public string RESPONSIVENESS_TYPE;
    public string CLIENT_PORT;
    public string PAYLOAD_TYPE;
    public string VIRTUAL_TYPE;
    public string VID_CLIENT;
    public string VID_SERVER;
    public string CLIENT_ADDR;
    public string SERVER_ADDR;
    public string CLIENT_TUNNEL_ADDR;
    public string SERVER_TUNNEL_ADDR;
    public string ERROR_CODE_2;
    public string IPID;
    public string C2S_PKTS;
    public string C2S_OCTETS;
    public string S2C_PKTS;
    public string S2C_OCTETS;
    public string NUM_SUCC_TRANS;
    public string CONNECT_TIME;
    public string TOTAL_RESP;
    public string TIMEOUTS;
    public string RETRIES;
    public string RAI;
    public string TCP_SYNS;
    public string TCP_SYN_ACKS;
    public string TCP_SYN_RESETS;
    public string TCP_SYN_FINS;
    public string EVENT_TYPE;
    public string FLAGS;
    public string TIME_STAMP;
    public string EVENT_ID;
    public string EVENT_CODE;
    I hope someone can give me a solution. Thanks

    The fastest way is to use external tables or sql loader (sqlldr). (If you use external tables or sql loader, you don't use C# at all).

  • If I imported a CD into my iTunes library from one computer how can I listen to it from another computer?

    If I imported a CD into my iTunes library from one computer how can I listen to it from another computer?  I imported music from a CD into my compter at work and when I got home and went to my iTunes account none of the songs were in my library.  I also noticed that on my Work computer there were a couple songs that I had to click on the little 'cloud' icon before I could listen to them (these were not songs I imported they were songs that were already in my library).  Not sure if this makes semse...help.

    jamie171 wrote:
    My question is since I have imported them into my iTunes library from one computer why can't I access them from my iTunes library from another computer that I have authorized to access whats in my library?  Is there no way to import songs only once into the library and then access them from all my authorized computers?
    Only if you have iTunes Match or of the computers are on the same local network.

  • How to import a class not in the package from a package

    how to import a class not in the package from a package?

    http://java.sun.com/docs/books/tutorial/java/interpack/usepkgs.html

  • How to import .pdf files into iBooks?

    How to import .pdf files into iBooks?

    Or send the file from your computer to your ipod by emailing yourself the pdf. Then if you open the Mail client and you open the pdf there is an option to select open in ibooks. It will save it to your device for remote viewing.

  • How to import epub/pdf into macvericks' ibooks ?

    how to import epub/pdf into macvericks' ibooks ?

    Placing the PDF into an InDesign document shouldn't be a problem, but if it is, please post back. What I think you're asking for is how to edit a PDF with InDesign, which can't be done. You would need the source document, edit that and then export to another PDF (if PDF is the end goal). There are some programs that can edit PDFs or convert PDFs to other formats (Word, InDesign, etc.), and they will work to one extent or another. You should expect to have to rework parts of it should you go that way. Keep in mind that PDF is generally considered a final document that isn't intended to be edited.

  • How to import the IDOC into Seeburger BIC mapping designer

    Hi All,
    Can u please tell me how to import the IDOC into Seeburger BIC mapping desginer.
    I have scenario My scenario is SAP GTS 7.0.....>Seeburger BIS.....>Atlas customs system for Germany
    Idoc coming from SAP GTS to Seeburger BIS and then convert to EDIFACT send
    to Atlas systeam.
    Regards,
    Ramesh.

    Hi Ramesh
    BIC is a tool from Seeburger to transmit the XML data to EDI and EDI to XML.
    Seeburger mapping programs for transferring the XML data to EDI data and EDI data to XML data, but not for the structure changing, in the IR your mapping program is same.
    Receiver side you need AS2 Adapter for converting data to EDI target structure. we have many EDI versions are available, for converting the EDI to XML or vice versa AS2 gives some default mapping programs, xml to EDI or EDI to XML convertion done through this mapping programs.
    Seeburger AS adapter provider provides some mapping programs(for example EDI4010 version or other), if you are using the same EDI version(4010) then you can use that mapping programs, if the version is different then we can manually generate the Seeburger X2E and E2X mappings for the corresponding version and signal(850 or 810 or ..), for this seeburger provides the mapping designer tool (BIC), there we can develope the X2E and E2X mapping programs and configure this in the Seeburger work bench.
    Regards
    Ramesh

  • How to record V-Drums in Logic Express?

    I’m trying to record my V-Drums through the M-Audio 2626 interface into Logic Express. I’m able to trigger sounds in the Logic Express library when I conned the MIDI-out on the V-drums to the M-Audio.
    But I’d like to record the Roland drum sounds through Logic. Has anyone had success with this?
    I tried connecting the audio out from the V-drums into channel 1 on the M-Audio with a 1/4-inch instrument cable. I can hear the drum kit through the M-Audio via the headphone jack, but not through Logic Express.
    If anyone has successfully recorded Roland V-drums in Logic, any information would be helpful.
    Many thanks,
    

John
    iMac 2.8 GHz Intel Core i5
    RAM: 4GB 1333 MHz DDR3
    Mac OS X 10.6.6
    M-Audio ProFire 2626
    Software Version 0x100C1
    Roland TD-4 V-Drums
    Logic Express 9.1.3

    Hi,
    you're on the right way. You have to create an audio track in Logic (one for each output of the drums or simply a stereo track for the drum's stereo output - depending on your configuration).
    1. Select the appropriate channel of your M-Audio as the audio track's input
    2. Click the little red "R" to arm this track for recording or press the littel "I" to activate input monitoring for rehearsal.
    3. Start recording and there you are.
    4. Don't forget: Have fun!
    Fox

  • How to import one photo into iphoto 11

    how to import one photo into iphoto 11 in the exact order i want it?

    How many orders do you need to import one photo?
    Perhaps you need to explain that again
    Regards
    TD

  • How to import jsf libraries into eclipse

    hi,
    i want to run jsf applications in eclipse......
    i installed tomcat, j2sdk, eclipse, and tomcat plugin.... and configured everything....now i want to excute jsf applications in eclipse...how to import jsf libraries into eclipse....
    plz help me

    ok thank u
    i have other doubt
    i am using tomcatplugin instead of myeclipse plugin
    is tomcat plugin supports jsf or not?

  • How to import maven projects into jdev

    Hi.
    i have maven project created in other than jdev IDE.i am trying to import maven project into jdev.
    i configured maven in jdeveloper 11.1.1.4 with help manu check for updates.
    i am follwoing the [how to import maven project into jdev|http://www.oracle.com/technetwork/developer-tools/jdev/maven11g-090173.html#4]
    after updating my jdev with maven extensions,i could not see maven project in file|import project menu.
    why maven project is not appearing in jdev 11.1.1.4. file|import project menu ?
    please help appriciate your help

    Though it's not clear in that link, I believe those instructions to be for JDev 11.1.2.1.0, not 11.1.1.4.0. However somebody may correct me.
    CM.

  • How to import VLC downloads into final cut?

    my new final cut express does not accept VLC trailers which i downloaded ,
    can i transform VLC into Quicktime?

    i checked again
    those downloads i made with VLC
    actually are WMV (they only look like VLC
    so th question is :
    how cani import those WMVs into final cut express?
    thx for responding

  • How to import LDAP users into OSM users?

    Can you please guide how to import LDAP users into OSM users?
    Regards,
    Menaka

    Hi Menaka,
    Refer http://docs.oracle.com/cd/E35413_01/doc.722/e35414/adm_security.htm u would find the necessary soultion.
    Thanks..

Maybe you are looking for