-5420 error Streaming Server

Hi,
I get and error "-5420 Conncetion failed" on Quicktime Streaming Services on my Intel xServe.
It suddenly stopped streaming after a long time streaming.
I cannot figure out how to fix this problem. Does anyone know what can be wrong?

I'm getting the same error when I'm outside my network. Is there maybe a port that needs to be opened?

Similar Messages

Darwin Streaming Server & Quicktime Broadcaster Problems

recently upgraded to Darwin Streaming Server 5.5, and am having difficulty with it. I keep getting the following error when I try to change the settings under the Broadcaster sidebar menu item.
Error - Perl execution failed
Can't call method "state" on an undefined value at /Library/QuickTimeStreaming/AdminHtml/parse_xml.cgi line 1365.
The line that this error references is:
if (($broadcasterConn->state = 0) && ($theAction eq 'SaveBroadcasterSettings')) {
Additionally, If I select "Broadcast" in QuickTimeBroadcaster, I am presented with this error:
Connection Failed (-5420)
I have not experienced these errors with the previous version, which I uninstalled. When I reinstalled DSS I received a "Successfully Install" Message.
And...for what its worth, this is the version of perl I am using:
This is perl, v5.8.6 built for darwin-thread-multi-2level
Any help is greatly appreciated.
Thank you.

We use 10.3.9 server here on three different machines. Two of the three disconnect from Broadcaster after about half an hour, with the -3285. The third system will not even allow a connection to start, ever. I am thinking that the automatic unicast file has a permissions issue. All of the three servers have Open Directory enabled. I want to turn it off, but I am not sure what will happen to the rest of the server's abilities if I do. Does anyone run in an Open Directory disabled configuration?

Error while installing Grid Control 12c (ERROR STREAM: *sys-package-mgr*: skipping bad jar)

Hi all,
   OS: OEL 6.3 64 bits
   DB: 11.2.0.3
   Grid: 12.1
   While installing Grid Control 12c, the following error appears to me:
INFO: SaveInvWCCE JRE files in Scratch
INFO: oracle.installer.mandatorySetup property is set to false, so skipping the execution of additional tools
INFO: oracle.installer.installUpdates property is set to false, so skipping the checking of updates
INFO: Config Initialize JRE files in Scratch
INFO: no env vars set, no envVars.properties file is generated
INFO: none of the components are configurable
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: Adding iterator oracle.sysman.oii.oiif.oiifw.OiifwRootShWCDE
INFO: Updating the global context
INFO: Path To 'globalcontext.xml' = /gridControl/WLS/jdk16/install/chainedInstall/globalcontext
INFO: Since operation was successful, move the current OiicAPISessionDetails to installed list
INFO: Install Finished at: 2013-07-04_11-12-49-PM
INFO: The ARU ID found in shiphomeproperties.xml file is 226
INFO: ARUId present in shiphomeproperties.xml matches with the 64 bit OMS Platforms ARU ID 226, so -d64 is passed for wls install.
INFO: Executing the command /gridControl/WLS/jdk16/jdk/bin/java   -d64 -Djava.io.tmpdir=/gridControl/WLS/.wlsinstall_temp -Xms128m -Xmx1024m -jar /u01/binaries//wls/wls1035_generic.jar -mode=silent -silent_xml=/gridControl/WLS/.wlsinstall_temp/wls.xml -log=/u01/oraInventory/logs/installActions2013-07-04_11-07-45PM.log.wls -log_priority=debug
INFO: Extracting 0%....................................................................................................100%
INFO: ERROR STREAM: *sys-package-mgr*: skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'
INFO: #
INFO: # A fatal error has been detected by the Java Runtime Environment:
INFO: #
INFO: # SIGSEGV (0xb) at pc=0x0000003a23689cdc, pid=24834, tid=139710737405696
INFO: #
INFO: # JRE version: 6.0_24-b50
INFO: # Java VM: Java HotSpot(TM) 64-Bit Server VM (19.1-b02 mixed mode linux-amd64 compressed oops)
INFO: # Problematic frame:
INFO: # C [libc.so.6+0x89cdc]
INFO: #
INFO: # An error report file with more information is saved as:
INFO: # /tmp/hs_err_pid24834.log
INFO: #
INFO: # If you would like to submit a bug report, please visit:
INFO: #   http://java.sun.com/webapps/bugreport/crash.jsp
INFO: #
INFO: Return value is 134
INFO: POPUP ERROR:Installation of Oracle WebLogic Server has failed, check log files for more details.
   The line "skipping bad jar, '/u01/binaries/wls/wls1035_generic.jar'" is the one that's worring me. Can it be corrupt? Or it is something else?
   Thanks in advance.

Its too early to conclude the issue is a bug with out looking into the logs. For the same reason i requested you to open an SR so that we can have a look at the logs and identify the cause. If you are Oracle employee then you can share the VM details else we need logs to debug this further. If any one from your company can open an sr and share logs then that will be helpful. Can you also check if the shiphome that you downloaded is all correct and checksum/byte matches to what is mentioned on OTN.

JMF and the Darwin Streaming Server

Has anyone been successful in getting the JMF JMStudio to work with
the Darwin Streaming Server? I have set up Darwin on my computer and
encoded a sample .mov file using a codec that is supposed to be
compatible with JMF, the H.263. I was able to view this file inside
JMStudio if I opened it directly as a file. I was also able to stream
this file via the server using the Quicktime movie player by opening
URL to rtsp://localhost/test.mov
However, when I go into JMStudio's Open URL, and put in
rtsp://localhost/test.mov, I get an error message saying:
Controller Error:
Failed to realize: Server is not responding.
I am using JMF Version 2.1.1e and the Apple Darwin Streaming Server
5.0
If anyone has any suggestions, please let me know. Also, let me know
if there is another streaming server, preferably open source, that
works well with JMF.
thanks.

your doing local host, JMF needs to receive rtp on
port XXXX, now if you are receivng on port XXXX the
server maybe trying to send on the same port , or
maybe it's trying to send the RTCP data.
Does darwin use RTCP ?? and also I would try from
second computer , as JMF sends, receives on same port.I am pretty sure all the ports are set up correctly. I have tried connecting from another computer and run into the same issues. Also, I was able to view the movie just fine from the same computer (connecting to itself) using the Quicktime Java package provided by Apple. I've been able to view movies in quicktime using the RTSP protocol

Darwin streaming server

I can't find a discussion area dedicated to Quicktime or Darwin Streaming Server technologies, so since I am working on a MacBook Pro I'll put my initial question here... if anyone wants to direct me to a more appropriate forum, please do!
The problem: I have gone through the Darwin Streaming Server installation process (using Apple's provided installer for v5.5.5) and no errors were reported until the server setup part (via Safari). At that point I was informed that the server had not started as it should have, as part of the installation. I have tried manually launching the QuicktimeStreamingServer executable from Terminal, but it gives me the error "Bad executable (or shared library)".
Any help welcome!
Thanks...

Hi Matt,
I spent a few hours troubleshooting this since I got the same error message. Giving up, I decided to download an earlier version:
http://www.opensource.apple.com/projects/streaming/release/DarwinStreamingSrvr5. 5-OSX.dmg
Version 5.5 was able to install correctly and immediately took me to the Darwin Streaming Server Admin url.
I'm using 10.5.1 on a power pc [intel dual core]

Quicktime Broadcaster 1.5 and Darwin Streaming Server 5.5

Since i upgraded to Quicktime Broadcaster 1.5 (as i want to use H264) i can't use any more the Automatic Unicast (Announce). It says 'Broadcast error disconnected (-3285). I updated to Darwin Streaming Server 5.5 (on SuSE 9.1 Linux on a hired server with 2 IP's, one binded to DSS, the other to Apache to enable Streamin over port 80) but it doesn't help. I tried with Wirecast instead and everything workes fine (at least it created the .sdp file correctly) so i don't think the problem is in the Streaming Server Set up. Anyone has experienced something similar with the new Broadcaster?

We use 10.3.9 server here on three different machines. Two of the three disconnect from Broadcaster after about half an hour, with the -3285. The third system will not even allow a connection to start, ever. I am thinking that the automatic unicast file has a permissions issue. All of the three servers have Open Directory enabled. I want to turn it off, but I am not sure what will happen to the rest of the server's abilities if I do. Does anyone run in an Open Directory disabled configuration?

Quicktime Streaming Server - qtss - service does not start in Server Admin.

Hi,
We're currently trying to configure a video/audio streaming server, but we've fallen at the first hurdle and the QuickTime Streaming service will not start (I am trying to enable it via Server Admin). Can anyone think of any possible reasons for this?
Many thanks,
Dave

It's probably not hugely relevant but are you trying to start it remotely or locally on the server? I know Server Admin can get a bit laggy and not always do what it should when starting services. Also can you check in the logs for the service (Quicktime Streaming>Logs>Error Log) to see if there's anything in there which gives and indication. Paste the output here if you need anymore help with that.
N.

Upgrade FMS2 - Streaming Server 3.5 - Video not streaming - NetConnection.Connect.Rejected

I have Flash Media Server 2 set up with a simple bandwidth detection application (with serverside code), and a videoplayer application (no serverside code). I have upgraded to Flash Media Streaming Server 3.5 and have managed to successfully get video to stream using the basic examples on the startup screen both locally and from another machine. However, when I try and connect to either the bandwidth detection application, or the videoplayer I get the error message:
NetConnection.Connect.Rejected
[ Server.Reject ] : (_defaultRoot_, _defaultVHost_) : Application (**my appname**/) is not a valid signed application; loading access denied.
I saw another post in this forum saying that for custom applications you need Flash Media Interactive Server instead of Streaming Server. This worries me as I'm quite far down this route now and don't want to tell my boss that actually we need to find another £2k to make this a viable solution! But looking at the credentials of Flash Media Streaming server (http://www.adobe.com/products/flashmediaserver/compare/), it seems to be that what I want to do is viable. At worst I would have thought that only the bandwidth application would be a problem as it has serverside code. But even so, the Streaming Server apparently does have bandwidth detection. How does this work then?
By having the Steaming Server am I somehow tied into Adobe video players if I want to use the streaming capabliities? Am I not able to have my own named application? Or is it simply likely that there is some setting somewhere I have missed which is causing the error.
Any advice would be much appreciated as I'm struggling to get to the root of these answers on my own.

You just need to define handlers specially onBWDone on client side to do Bandwidth detection. Just check example "Bandwidth" in documentation/samples/Bandwidth/Bandwidth.as.
Since you are using VOD, i think you can just pass "true" as second parameter when you make nc.connect call in you client side and VOD application would make call to checkBandwidth and would call onBWDone when it finishes bandwidth detection. Read more about this in Client API documentation in SSLR.pdf and Dev_Guide.pdf.
Also Adobe has come with advanced Bandwidth detection which you can do using client-side Flash Player API's - Please check this link for more info:http://www.adobe.com/devnet/flashmediaserver/articles/dynstream_on_demand.html
Also you can NetStreamInfo documentation which should be present in AS3LR (check documentation folder of FMS)

Streaming server 3.5.1 no script works except main.far (VOD)

we own multiple FMS servers, interactive and now we installed
a few Streaming servers.
during the install process we provide the license key
for the Stream server's we got from the adobe representatives
in our country, and all seems well until we try to move an already used VOD
script to the /opt/adobe/fms/applications/vod/ folder
the script is named main.asc and replaces the main.far
which comes with the out of the box VOD application.
this script works on all Interactive servers but fails
to work on the Stream servers.
it simply fails silenty, no logs and no errors are written anywhere....
so i thought the problem might be some feature i try to invoke
in the code while streaming server does not support it, so i stripped
the main.asc to be practically empty..
application.onAppStart = function(){
    trace("application start");
application.onAppStop = function(){
    trace("application end");
application.onConnect = function( client ) {
    trace("accepting connection");
    application.acceptConnection( client );
application.onDisconnect = function(client){
    trace("application.onDisconnect");
yet the problem persists, perhaps we have wrong license key?
does the streaming server allow scripting at all???
ps: when i change the licence key of the streaming server to
Interactive server's Key, all starts working...
Any ideas ?

Hi,
The behavior you encounter with FMS Streaming Server edition is expected. The streaming edition only offers streaming capabilities as outlined athttp://www.adobe.com/devnet/logged_in/dmotamedi_fms3.html .
As small gist from there :
Flash Media Streaming Server (FMSS) is a brand new product offering. This low-cost server is limited to live and video-on-demand (VOD) applications only. It cannot be used for multiway applications such as video chat, server-side playlists, or server-side recording. Flash Media Streaming Server does not support the new plug-in architecture or server-side ActionScript API. Edge or Origin configurations are not available in the streaming server either.
So if you are looking for server-side scripting support and other features like C++ plug-in framework etc to build interactive/ collaborative applications you need to choose the Flash Media Interactive Server.
Thanks
Mamata

How to convert JPEG Files into Streams for Darwin Streaming Server?

Hi!
Is there any possibility to convert JPEG Files locatet in a Folder into a Videostream for the Darwin Streaming Server, like Quicktime Broadcaster does with my iSight Video??? I know I can convert JPEGs into Movies using QuickTime Pro, but that is not exactly what I am seraching for: I have a folder, where some kind of Webcam writes about 5 JPEG pictures per second. Now I would like to have these pictures in converted into a videostream in realtime. QuickTime Broadcaster would be the weapon of choice if it would accept JPEG Files as input...
Is there any posibility to solve this problem??
CU Jan

Hello Karthik,
I just tried to solve my problem with your suggestions, unfortunately, my JSP channel still doesn't work :(
The portal server keeps reporting "Server Error..." when I tried to add query at the end of the href.
Do you still have any other suggestions?
Thank you

Can't add to library "the streaming server cannot accept

Had trouble w/ library; uninstall - reinstall Apple for WinXP x86... kep getting this Error message when trying to import Library from a Folder:
c:\seagate FreeAgent\Jukebox
Upon initiate... the screen blips to the Internet Music 'genre' and immediately pops up w/ the Server Cannot Accept Connections.
Upon reload of the application this continues to behave the same. What is the correct version for an XP OS... or what is the problem???
Thanks in advance,

Such a message generally means that there's a problem with the streaming server, not with iTunes or with your computer. It may well be that the station you're trying to connect to is just popular and is reaching the limits of the number of users it will allow.

Playing video from a streaming server

Hi I've been using the insert flash video feature in dreamweaver CS3, using progressive download video and it works just fine. But lately I've hired a flash media server to host my videos and whent I try to use the streaming video option it gives me this error message when I type the address of the video:
The URL cannot contain spaces or special characters.
Change the path or file name and try again
The address of my video is: rtmp://p8bezucu.rtmphost.com/testevideo/portfolio.flv
appreciate any help

I have never used a streaming server, but looking at the instructions for inserting an FLV, it seems as though the name of the file doesn't go in the Server URI field. See the relevant help file: http://livedocs.adobe.com/en_US/Dreamweaver/9.0/WSc78c5058ca073340dcda9110b1f693f21-7c9e.h tml.
It says that Server URI specifies the server name, application name, and instance name in the form rtmp://www.example.com/app_name/instance_name. The name of the FLV goes in the Stream Name field.

Reference Movies and Streaming Server

I have compressed my movie in multiple streaming sizes, 56k-T1. I have tried several times to use MakeRefMovie app to make a MSTR movie that will deliver up the propery version of the movie on the Streaming server they will reside. I get an error everytime.
It works locally, but not when embedded in an HTML page.
I've tried pulling the movies into MakeRefMovie and then changing their location to a URL, no dice.
I've tried opening the movie in Quicktime Pro using the Open URL, then doing a save as and calling that movie into MakeRefMovie. No dice.
Do I not need a reference movie with streaming video? Or should the server call it up automatically? If so, what is the HTML I should put in my page to make this happen?
-Kirk

If your files are served using streaming server software the audio and video tracks need "hint" tracks.
You can create them without re-exporting using the Automator app.
QuickTime Pro already includes "Export to Web" which can make three different versions of your file and automatically serve up the correct version based on your page visitor settings.
It even writes the proper html code which you can copy/paste into your existing pages. These files are served via HTTP and no streaming server software or hint tracks are required.

What is this? "The streaming server cannot accept any more connections at this time."

I just tried to start iTunes, and got this error message instead of a song: "The streaming server cannot accept any more connections at this time." I've never encountered this before. I guess I should be glad I'm not one of those people who got rid of their records and CDs.

Such a message generally means that there's a problem with the streaming server, not with iTunes or with your computer. It may well be that the station you're trying to connect to is just popular and is reaching the limits of the number of users it will allow.

The streaming server cannot accept any more connectionections at this time.

When I try to play a radio station with iTunes, a window pops up wiht the iTunes error message: "The streaming server cannot accept any more connecitons at this time."
I've restarted my computer. Still get the error message.
I've dumped all of my internet temporary memory. Still get the error message.
Can someone help?
Vaio Laptop Windows Vista iTunes v7.3

Such a message generally means that there's a problem with the streaming server, not with iTunes or with your computer. It may well be that the station you're trying to connect to is just popular and is reaching the limits of the number of users it will allow.

-5420 error Streaming Server

Similar Messages

Maybe you are looking for