5800 does not maintain connection with Sony Ericss...

I recently upgraded from the N70 to the 5800. I was using a Sony Ericsson HBH-602 bluetooth headset with the N70, and it worked perfectly. Specifically, as long as bluetooth was enabled on the phone, all I had to do was turn on the headset and it would connect with the phone, and remain connected as long as both were powered on and in range.
With the 5800, the headset also connects to the phone when turned on, but the phone drops the connection a few seconds later. However, if I initiate the connection from the phone, it works as expected, and remains connected. This is usable, but it would be preferable if I could control the connection entirely from the headset, as described above.
Any suggestions would be greatly appreciated.
Thanks in advance.

I have the same problem but with Nokia BH-903.
It worked really fine with the N95, but with the 5800 it doesn't work so well. When i am in a call it always disconnect to the phone, or when i am listening to music it paused the music or it disconnect.

Similar Messages

  • My 5800 does not automatically connect to Bluetoot...

    Hey Folks,
    I have the following problem with my 5800 X-Press Music: I paired my Bluetooth Headset with my mobile and everything works fine. Then I accepted the question about automatic connection between headset and mobile. But when I turn the headset off and on, my mobile does not (re)connect to the headset. I did a lot of research and found a lot of topics where people says that this is a bug in the bluetooth firmware. I just upgraded my firmware to the newest version, but that did not solve it. 
    any hints and help would be appreciated, but answers from nokia officials would be the best for me!
    Thank you in advance

    It's more likely to be a bug in the bluetooth earpiece. I too have one and it does reconnect automatically when I switch it on, provided bluetooth is switched on on the phone, obviously.
    Message Edited by grschinon on 29-Jul-2009 12:14 PM
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Iphone 5 wifi does not maintain connection or automatically connect

    I phone 5 does not always maintain connection and does not automatically connect. I have selected the wifi system and entered password for such but each time I have to reenter password.

    "Ask to join networks" is off. I also tried turning off the phone and restarting it. My wife's iPhone 5 is doing the same thing. Could it have something to do with my router?

  • Wireless does not hold connection with b43 driver!

    Hi everybody!!
    It's my first time here in the forum, so nice to meet you.
    I have a laptop Acer Aspire 3050 and I recently formatted it to install the new Arch 2009.08.
    It's pretty cool, but I can't make my wireless card (Broadcom BCM4318) work with b43 driver. It worked very well with Arch 2009.02, but now it's a pain!
    It recognizes the driver, loads it and connect with no problems, but when I ping my desktop machine, it says that unfortunate message "Destination Host Unreachable"
    It sometimes works when I do these commands about 5 or 10 times:
    ./connect
    ping 192.168.0.1 >>> Destination Host Unreachable
    ifconfig wlan0 down
    rmmod b43
    /etc/rc.d/network restart
    modprobe b43
    ./connect
    [... many more times]
    but even when it does connect, it usually can't hold the connection for more than 15 or 20 minutes. And I have to do it all again.
    Hear goes some info on configuration files so it may help you:
    lspci -vk
    08:04.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
    Subsystem: AMBIT Microsystem Corp. TravelMate 2410
    Flags: bus master, fast devsel, latency 64, IRQ 21
    Memory at d0200000 (32-bit, non-prefetchable) [size=8K]
    Kernel driver in use: b43-pci-bridge
    Kernel modules: ssb
    lsmod | grep "b43"
    b43 137208 0
    mac80211 155532 1 b43
    cfg80211 90428 2 b43,mac80211
    ssb 45988 1 b43
    pcmcia 36168 2 b43,ssb
    pcmcia_core 35184 5 b43,yenta_socket,rsrc_nonstatic,ssb,pcmcia
    led_class 4000 3 b43,sdhci,acer_wmi
    /etc/rc.conf
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(!b43 !ndiswrapper)
    #Static IP example
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    #eth0="dhcp"
    INTERFACES=()
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    DAEMONS=(syslog-ng network netfs crond hal)
    I've already tried many different configurations in rc.conf, but it still does not estabilish a connection in the first try.
    I'm using the driver from the wiki (http://mirror2.openwrt.org/sources/broa … .5.tar.bz2) and did not try with only ndiswrapper. It's because I want to have all functionalities from criptography and... after all, it was supposed to work, wasn't it?
    Where could be the problem? The driver version? Or bad configuration?
    Thanks in advance!! If you need more information, please ask.

    So, the same problem occurred and in a relatively shorter time than before. I began to think that something is causing this problem.
    My theory is that it is a VMWare software issue. What I've been doing differently recently is using it in "Unity" mode as opposed to "Full Screen" mode. My guess is that the program is modifying my wireless permissions and screwing it all up.
    So, what I've done is set the "Network Adapter" to "Host-Only". This denies the VMWare program internet access but still allows file sharing between the Windows virtual environment and the Mac hard drive.
    Then I had to re-install Mac OS X all over again to fix the wireless settings/permissions mess.

  • ISync does not correctly connect with or identify my Samsung A437 Phone

    I just got an AT&T Samsung A437 Phone (courtesy of work). I have connected the phone to my computer via the USB cable supplied by AT&T, but the phone is not correctly identified/connected to iSync. The phone shows up in iSync as an "unidentified Motorola phone" and iSync won't/can't talk to it. The phone also does not mount on the desktop for file transfers.
    Any help or suggestions (besides the obvious "get an iPhone" - my company bought this subscription - I don't have a choice of equipment) would be appreciated. TIA.
    Webb Sussman

    I also have a A437 and am trying to get my MacBook Pro to recognize it with no success. There doesn't appear to be an option in the Samsung setup to make the device 'recognizable', but I thought the Mac would simply find the device when I went into setup.

  • N5800 not maintaining connection with plantronics ...

    it can be easily paired with headset. but every now and then it disconnect and connect with the headset. i have already consulted with plantronics and mentioned a power cycle to be done and remove current pairing and re-pairing it again. but the issue is still exists.
    5800 current firmware version is v 30.0.0.11
    any idea from nokia's end?
    highly appreciatted a response.
    thanks

    i have the same problemo but i read that it can be rectified with broadcomm bluetoth stack.
    Regards

  • IOS 5.0.1 does not allow connection with my car's bluetooth. Is this similar with any of you?

    After updating to the new ios 5.0.1, my iPhone is not connecting with my Ford Fiesta's bluetooth. But the old ios was working perfectly.

    Delete the pairing on both the phone and the car, then re-pair them.

  • BB LINK 123.2.3 Does not WiFi CONNECT with Q10 OS 10.2.1;1925

    Upgraded to the current revision of LINK.  Now, a Q10 v10.2.1 will not WiFi connect.  Connection was solid on prior revision of LINK.  I have tried re-launching LINK as well as cold and warm restart of the Q10.
    Solved!
    Go to Solution.

    you updated your bb link to 123.2.3 and your q10 will not connect to wifi anymore? is that what you asking?

  • 5800 does not turn on with SD card

    Hi,
    I have recently used Nokia PC Suite to delete some SMS from my Nokia 5800.
    After that, the phone has stopped turning on when the SD card is in.
    If I remove the SD card, the phone will switch on normally.
    How can I fix this?
    Thanks,
    Marco
    Message Edited by marcoterz on 06-Jan-2010 12:13 PM

    Take the card out of the 5800. Put it in a PC and run a Check Disk on it. Fix all the errors. Re-insert it into your 5800.
    If that doesn't work. Copy the contents of the card on your PC in a directory. Format the card. Copy stuff back on it. Re-insert it into your 5800.
    Gilles. 

  • Acrobat does not allow connection to a certain website

    I have a PDF with a link to a pdf-file on a certain website. When one user clicks the link it says ( it is in dutch, so i try to translate):
    Acrobat does not allow connection with www.XXXX  (the name of the link where the link addresses to)
    We work in Citrix, most users do not have the problem, only one user has.

    Compare the Security (enhanced) and Trust Manager settings for yourself and the user on the same machine. If they are not identical, make them so. If that doesn't work,
    I'm assuming the msg appears in a dialog and not the yellow msg bar.
    Ben

  • Does not automatically connect to wireless network anymore

    Mac Book does not automatically connect to know networks any longer.

    Hi sashton,
    When troubleshooting Wi-Fi connectivity issues, I find the following resource has the most relevant information:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Furthermore, you may want to avoid giving your network a common name. While the following article (and excerpt) refer to iOS devices, the same applies for your Mac:
    Avoid giving your wireless network a common name (SSID)
    http://support.apple.com/kb/HT4450
    If you were to give your wireless network a common name (SSID), users of your network who use iOS devices [sic] and are away from your network would run the risk of joining a different network with the same name. Having joined the unexpected network, they would be exposed to potential data theft.
    Because of this security issue, Apple maintains a list of common or ambiguous SSIDs, including the default SSID for many commercially available access points, as well as the SSIDs "wireless" and "default". If your network's name is on the list, any iOS device [sic] that joins the network stores the access point's BSSID and associates it with the network's SSID. Subsequently, it will only auto-join the network if the access point's BSSID matches the information the device has stored. This avoids joining a different network with the same name.
    Therefore, you may want to refer to the following article when configuring your Wi-Fi router:
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    Thanks,
    Matt M.

  • Iphone 4 does not stay connected to my network

    Since upgrading to 6.1, my iPhone 4 does not stay connected to my network.  I have to input my password each time I leave my house.  My other devices stay connected, so the issue is with the upgrade.  Has anyone found a way to keep their IPhone connected to their network?  Thanks.

    I don't have another phone to try. I took out the sim to check for deffects but it looked fine. Cleaned the sim card with alcohol and cleaned the aim compartment. Phone didn't loose Internet connection all day yesterday, but this morning went to check emails and wouldn't update until I turned airplane mode on then off again.

  • Iphone does not stay connected to wi-fi.

    When using apps or when in sleep mode my iphone does not stay connected to my wi-fi. All other items within the house have no issues with staying connected to my wi-fi.

    By design, when entering sleep mode, the iPhone will disconnect from WiFi to conserve battery. If you want the WiFi connection to remain persistent, plug your phone into a power source.

  • IPad (3rd generation) does not automatically connect to wi-fi.

    iPad (3rd generation) does not automatically connect to wi-fi.  It is fully updated to 5.1.1 but you have to manually connect after turning off and back on.  I also have an iPad 2 with the same OS but it automatically connects.  The wi-fi has no security. 

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Acrobat does not allow connection to

    Need help with this error message please.  Using Win7, saved a Word 2010 table of contents with multiple links to pdf files across internal servers as a PDF.  Also created the word doc w/multiple pdf links as a PDF file using acrobat9 standard and have same problems.   when a user with Adobe Reader 8+ clicks on a pdf link in the PDF table of contents file, they get an error message Acrobat does not allow connection to:   and they cannot open the linked file.  However, I am able to open the files using the same links with both reader and acrobat.   
    This worked previously until we upgraded to these versions of software... the error message shows a number of % signs and multiple ////.  However, i can open the fiile but others cannot.
    anyone have any ideas or is this a fix that i need to download?  

    not sure where my previous reply went; however, there are numerous machines at varuious sites that will be accessing this server/folder.  I am not sure if it is a trusted sites issue as the file lists numerous PDF links and some of them open to the respective pdf file and others recieve the mssage.  All the files reside on the same server within the same main folder and within subfolders.  never had the problem before.  the users can open some of the linked files and others the connection msg appears.  I however, am able to open the same links they get the error on.  I am totally baffled by this and have been troubleshooting for weeks now.  I just had acrobat X installed to see if that would help but still problem.  I also saved the word doc (2010) as pdf (which lists the links to the other pdfs) but users still have same problem.  there are approx 75 links within this doc and I truly hope we don't have to relink everything..

Maybe you are looking for

  • How to capture the selected values of the filter?

    Hi Everybody I have created a dashboard using a 4 column filter. It all works well - no problem. I now need to enhance the functionality of the dashboard which needs the selected values of each of the parameters of the filter. As far as I know, the s

  • Itunes wont install on windows7

    After downloading the latest itunes update, I can't install on my Windows Ver 7 laptop.   After re-booting, I received an error message that MSVCR80.dll is missing.I've already removed itunes and downloaded a fresh copy from apple site and tried to r

  • Problems installing Sonata Std font for use in Word 2011 for Mac

    I just purchased and installed Sonata Std font (downloaded from the Adobe website) for use on my 2009 MacBook, running OSX 5.8. I'm trying to use the font in MS Word for Mac 2011. Sonata Std is now showing up in the list of available fonts within Wor

  • Best car CD unit to hook up to ipod

    I need to buy a CD player am/fm to put in my car. I would like to be able to hook my Classic 160 ipod up to it and see the Track info on the CD units display, be able to go back and forward using the CD unit track controls, but still be able to use t

  • IMac started freezing.

    Now when I try to start it up there is no display and no start up tone. Every once in awhile it will boot up normally but will eventually freeze again. OS X 10.9.3 iMac 21.5 late 2009. Froze during hardware test. 12gb RAM everything else stock. Anyon