5800 XM: potential issue while configuring email

This is what happened to me:
trying to config an internet email, the 5800 automatically sets some parameters of the mailbox, not to mention they were wrong.
And it is impossible to change them.
This happens only when 5800 does know the email service you are using (or it supposes to know).
Workaround: configure a totally pointless email address at 1st request ... doing so you can manually configure the rest.

This seems to be setup issue
By any chance have you setup the loopback adapter?

Similar Messages

Issue while configuring email router with ms crm 2013 exchange 2007

Outgoing emails are working fine however when we try to configure incoming emails we get foolowing error:-
Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. The remote certificate is invalid according to the validation procedure.
Any help will highly be appreciated
Regards Faisal

Thanks for the response. Link was useful. Now we are able to send mail only using the same account which we have used for Outgoing profile connection. Couldn't Identify what is the issue. PFB screenshots of the configured outgoing profile.

Issue while configuring XLIFF as resource bundle

We are using Jdeveloper 11.1.1.7.0 ver. We are configuring ADF Faces project for XLIFF by creating xliff file in resources folder and adding xliff file to project properties.
In design time we are able to see the configured values when we use expression builder however, we are getting following exception at runtime:
java.util.MissingResourceException: Can't find bundle for base name UIRes, locale en
at java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:1521)
at java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:1260)

I am getting issue while configuring report in integrated mode! The issue and the solution to that is as mentioned here.
I tried to set the Report Server Service account to Use Another Account
but when i try to apply i get the issue as below.
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC
---> System.Runtime.InteropServices.COMException (0x800708AC): The group name could not be found. (Exception from HRESULT: 0x800708AC)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
Kindly help!
I have the same error after a change in domain policies and after reconfigure the password of the domain account user used for the Report Server Service Account.
I don't use a group!!!
Thank You for any help!
Alessio

Issue while configuring Xampp

Hi Experts,
We are facing an issue while configuring Xampp. We have successfully installed Xampp but while selecting Admin Tab we are getting below error. We have release ports(25) and made the Windows Firewall OFF, still the issue exists. Can you please suggest us how to move forward...
Thanks in Advance..
Regards,
Krishna.M

I am getting issue while configuring report in integrated mode! The issue and the solution to that is as mentioned here.
I tried to set the Report Server Service account to Use Another Account
but when i try to apply i get the issue as below.
Microsoft.ReportingServices.WmiProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 800708AC
---> System.Runtime.InteropServices.COMException (0x800708AC): The group name could not be found. (Exception from HRESULT: 0x800708AC)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.ThrowOnError(ManagementBaseObject mo)
at Microsoft.ReportingServices.WmiProvider.RSWmiAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWindowsServiceIdentity(String accountName, String password, Boolean useBuiltinAccount)
Kindly help!
I have the same error after a change in domain policies and after reconfigure the password of the domain account user used for the Report Server Service Account.
I don't use a group!!!
Thank You for any help!
Alessio

Having issues while configuring JDI/ on my NWDS.

Having issues while configuring JDI on my NWDS.
I am logged on to Client's domain. Is there some setting thats required to be done in the hosts/service file which would ensure the same.
Please advise.

Hi,
Can you specify what issues you are facing ?
Thanks & Regards,
Meenakshi.

An issue while Configuring the Access System Console

I'm facing a problem while Configuring the Access System Console.
I have installed the policy manager, and when I try to configure the access system, an error message appears "The environment variable TEMP points to a directory that does not exist. To avoid any unexpected behavior, please make sure it points to the correct directory and restart the web server".
I have checked the temp system variable, and it was correct, and the directory already exist.
Note: I'm working on windows server 2003.
I really appreciate any help with this issue.

Check the permissions on the directory that the TEMP variable points to, to ensure that everyone has read/write access to it - maybe that's the problem.
Regards,
Colin

Issues while configuring java application using JDO with MS JDBC Driver 1.0

We are in the process of configuring our java application with the production version of SQL Server 2005 Java Database Connectivity (JDBC) Driver 1.0. We are facing issues getting it to work with Sun App Server using JDO concept.
After creating the data store, adding the JDBC driver to the application server classpath through console and also copying the driver into the lib directory, we are still getting the below error.
Following is the stack trace encountered while running the application
[#|2006-02-15T10:21:25.493+0530|WARNING|sun-appserver-pe8.1_02|javax.enterprise.system.container.ejb.entity.finder|_ThreadID=30;|JDO74010: Bean 'InventoryEJB' method ejbFindAllInventoryItems: problems running JDOQL query.
com.sun.jdo.api.persistence.support.JDOFatalInternalException: JDO76519: Failed to identify vendor type for the data store.
NestedException: java.sql.SQLException: Error in allocating a connection. Cause: javax.transaction.SystemException
     at com.sun.jdo.spi.persistence.support.sqlstore.impl.SQLPersistenceManagerFactory.initializeSQLStoreManager(SQLPersistenceManagerFactory.java:870)
     at com.sun.jdo.spi.persistence.support.sqlstore.impl.SQLPersistenceManagerFactory.getFromPool(SQLPersistenceManagerFactory.java:786)
     at com.sun.jdo.spi.persistence.support.sqlstore.impl.SQLPersistenceManagerFactory.getPersistenceManager(SQLPersistenceManagerFactory.java:673)
     at com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerFactoryImpl.getPersistenceManager(PersistenceManagerFactoryImpl.java:849)
     at com.sun.jdo.spi.persistence.support.sqlstore.impl.PersistenceManagerFactoryImpl.getPersistenceManager(PersistenceManagerFactoryImpl.java:681)
     at com.sun.j2ee.blueprints.supplier.inventory.ejb.InventoryEJB1142755294_ConcreteImpl.jdoGetPersistenceManager(InventoryEJB1142755294_ConcreteImpl.java:530)
     at com.sun.j2ee.blueprints.supplier.inventory.ejb.InventoryEJB1142755294_ConcreteImpl.ejbFindAllInventoryItems(InventoryEJB1142755294_ConcreteImpl.java:146)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.enterprise.security.SecurityUtil.invoke(SecurityUtil.java:147)
     at com.sun.ejb.containers.EJBLocalHomeInvocationHandler.invoke(EJBLocalHomeInvocationHandler.java:185)
     at $Proxy164.findAllInventoryItems(Unknown Source)
     at com.sun.j2ee.blueprints.supplier.inventory.web.DisplayInventoryBean.getInventory(Unknown Source)
     at org.apache.jsp.displayinventory_jsp._jspService(displayinventory_jsp.java:119)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:105)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:336)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:301)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:251)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:723)
     at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:482)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:417)
     at org.apache.catalina.core.ApplicationDispatcher.access$000(ApplicationDispatcher.java:80)
     at org.apache.catalina.core.ApplicationDispatcher$PrivilegedForward.run(ApplicationDispatcher.java:95)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:313)
     at com.sun.j2ee.blueprints.supplier.inventory.web.RcvrRequestProcessor.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:767)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:185)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:653)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:534)
     at com.sun.enterprise.web.connector.grizzly.ProcessorTask.doTask(ProcessorTask.java:403)
     at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:55)
Can anyone help me on this issue?
Regards,
Bindu

I have already tried this before and this not work too, but strange that even if I use JDBC:ODBC bridge driver, the return value for output parameters are not correct, that is, only return the value that I input but not the value after executed in the procedure....
The code that I used with JDBC:ODBC bridge is as follow:
public static void main(String[] args) {
String url = "jdbc:odbc:;DRIVER=SQL Server;Persist Security Info=False;database=db;Server=sql;uid=sa;pwd=pwd";
          Connection con;
          ResultSet rs = null;
CallableStatement callS = null;
          try {
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          } catch(java.lang.ClassNotFoundException e) {
               System.err.print("ClassNotFoundException: ");
               System.err.println(e.getMessage());
          try {
               con=DriverManager.getConnection(url);
callS = con.prepareCall("{ call dbo.CpJavaTest (?)}");
callS.registerOutParameter(1, Types.INTEGER);
callS.execute();
rs=callS.getResultSet();
int ret = callS.getInt(1);
System.out.println("return value : " + ret);
               while (rs.next()) {
                    String f1 = rs.getString(4);
                    String f2 = rs.getString(5);
                    System.out.println(f1 + " " + f2);
          } catch(SQLException ex) {
               System.out.println("SQLException: " + ex.getMessage());
The value of the output parameter is same as what I inputed! Hope any one can teach me how to correct it...
Thank you very much!

Problem while configuring email system in service desk message

Hi all,
I have configured my soution manager service desk for sending emails to the key user when the message status changes from New to In process.Now i want that a mail should go to the message processor when the message is assigned to him.For that i will have to define a new action but the issue is which smart form do i need to assign to that action.
Regards
Praveen

Hi Praveen
I am also doing Service Desk config. Can u please tell me how u configured External system. I was able to send messages internally. but from Other systems in landscape i am not able to. I f u have any document from end to end please send me.
Points will be awarded for the solution.
Rajesh

ODAC issue while configuring 11.1.2

Hi All,
I have installed 11.1.2 and while i'm trying to configure Performance Architect it shows "ODAC" not installed and database configuration failed.
is there any way to updated the oracle 11g without re-install.bcoz i configured remaining hyperion components.
Thanks ,
Ravi

I have downloaded ODAC & installed. Here the problem... oracle services are starting but when i tried to connect oracle db and its not connecting...says http:404 not found...help me on this...
*before ODAC it worked fine.

Issue while configuring cache management -/osb/service/ResultCache

Hello, I am trying to configure cache data management through OEM console of 12.1.0.2 version . While executing a coherance select query, I am getting below error message
"Error occurs while executing the "view" operation. CacheDataManager custom MBean is not registered with the Oracle Coherence JMX Server during startup. The custom MBean is available with the coherenceEMIntg.jar."
I have even included these jar files in my coherance server startup parameters ..
<>/agent12c/plugins/oracle.sysman.emas.agent.plugin_12.1.0.3.0/archives/coherence/coherenceEMIntg.jar:
<>/plugins/oracle.sysman.emas.agent.plugin_12.1.0.3.0/archives/coherence/bulkoperationsmbean.jar
could someone pls help on this.

Hi
To configure the SCAN , this SCAN IP should be resolve through DNS or /etc/hosts file .Please follow the below link to configure the DNS.
If you face any problem , then please let me know .
shivenracdba: configure DNS for Installtion of Oracle Grid Infrastructure RAC cluster
warm regards
Shivendra Narain Nirala

Facing issue while configuring JDBC MultiDataSources in WLS10.3

I am trying to configure MultiDataSources using two DataSources(DS1 & DS2) in WLS 10.3 and facing the following error. Trying to deploy DataSources and MultiDataSources on single Admin Server.
1. Created two DataSources. (Facing the following error while actaving cahanges)
2. Trying to configure the two DataSources to MultiDataSources. (Facing the following error while actaving cahanges)
Can anybody please help me solving this.......Thanks in advance.
Error from the console_
*"An error occurred during activation of changes, please see the log for details.*
*weblogic.application.ModuleException:*
*Failed to bind remote object (ClusterableRemoteRef(2287043621808027075S::TESTDOM1:AdminServer null)/301 [weblogic.jdbc.common.internal.RemoteDataSource]) to replica aware stub at DataSource(ClusterableRemoteRef(2287043621808027075S::TESTDOM1:AdminServer [2287043621808027075S::TESTDOM1:AdminServer/299])/299 [weblogic.jdbc.common.internal.RemoteDataSource])"*
Log File_
####<May 13, 2010 1:14:26 AM CDT> <Error> <Deployer> <Sunmac.corp.amdocs.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Def
ault (self-tuning)'> <<WLS Kernel>> <> <> <1273731266214> <BEA-149231> <Unable to set the activation state to true for the application 'DataSource1'.
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:350)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:415)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:75)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:67)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:39)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: weblogic.common.ResourceException: Failed to bind remote object (ClusterableRemoteRef(-4925001229520146495S::TESTDOMAIN1:AdminServer null)/289 [weblogic.jdbc.common.internal.RemoteDataSource]) to replica aware stub at DataSource(ClusterableRemoteRef(-4925001229520146495S::TESTDOMAIN1:AdminServer [-4
925001229520146495S::TESTDOMAIN1:AdminServer/286])/286 [weblogic.jdbc.common.internal.RemoteDataSource])
at weblogic.jdbc.common.internal.RmiDataSource.start(RmiDataSource.java:404)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:136)
at weblogic.jdbc.common.internal.DataSourceManager.createAndStartDataSource(DataSourceManager.java:97)
at weblogic.jdbc.module.JDBCModule.activate(JDBCModule.java:347)
at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:227)
at weblogic.application.internal.flow.DeploymentCallbackFlow$2.next(DeploymentCallbackFlow.java:415)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:75)
at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:67)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:83)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:39)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doPrepare(DeploymentAdapter.java:42)
at weblogic.management.deploy.internal.DeploymentAdapter.prepare(DeploymentAdapter.java:187)
at weblogic.management.deploy.internal.AppTransition$1.transitionApp(AppTransition.java:21)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.prepare(ConfiguredDeployments.java:165)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:122)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Edited by: user13254478 on Jun 2, 2010 3:35 AM
Edited by: user13254478 on Jun 2, 2010 3:39 AM

The reason behind these exception can be that :-
1.There can be some <jndi-name> conflicts in jdbc.xml
2.check for any null entries. like <jndi-name></jndi-name> if theses entries are there remove them.
3.Try to give unique <jndi-name> to each datasource .

Issue while configuring PO Rel Strategy with more than 17 rel conditions

Hi all,
I am trying to change a PO Rel startegy which has 8 release codes and about 25+ different release conditions already defined. When I am trying change the release status configuration tab I can only see upto 17 conditions. I don't see any work flow activation and I am not sure how intially they maintained all these conditions. Please let me know how to over come this issue.
Thank you for your time,
Srav

Hi all,
I am trying to change a PO Rel startegy which has 8 release codes and about 25+ different release conditions already defined. When I am trying change the release status configuration tab I can only see upto 17 conditions. I don't see any work flow activation and I am not sure how intially they maintained all these conditions. Please let me know how to over come this issue.
Thank you for your time,
Srav

OIM 11g R2-Issue while configuring oim domain in weblogic

Hi,
I'm trying to install OIM 11g R2 version and downloaded the entire suit from edelivery site.
Oracle DB version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
Others like Weblogic, RCU and IdM suite versions are 11g R2 downloaded from edelivery site
When i try to configure domain for OIM in weblogic, getting the below exception which is returning no rows
Component Schema=OIM Schema
Driver=oracle.jdbc.OracleDriver
URL=jdbc:oracle:thin:@localhost:1521/orcl
User=DEV5_OIM
Password=**********
SQL Test=select 1 from schema_version_registry where owner=(select user from dual) and mr_type='OIM' and version='11.1.2.0.0'
**CFGFWK-60850: Test Failed!**
**CFGFWK-60853: A connection was established to the database but no rows were returned from the test SQL statement.**

Hi,
It's likely that you need to Install/update the OIM schema by using the RCU. Its looking for the condition of the (where version =11.1.2.0.0) though it's not finding that version
-- What OIM schema is installed?
http://app-security.blogspot.com/2012/01/quick-oim-tip-finding-out-oim-version.html
Regards,
Daniel

Issue while configuring Shared Services 11.1.2.1

Hi All,
I am installting and configuring hyperion-64Bit- 11.1.2.1 (Essbase, Planning, FDM, EPMA) in a distrubed environment in windows 2008 R2 Server
Box1
I have sucessfully configured Shared Services, Essbase Administration Services.
Box2
I am at the screen of Setup Shared Services and Registry Database Connection associated with the instance home:
Here i give the
Database type: Oracle
Server : Servername
Port : Port Number
service Name or SID : Service name
User name : HSS
Password : Given the correct password here
and now when i click on next, nothing is happening, its just there its not progressing.. I have rebooted the server but still the samething. Its very wiered. Can someone help me what should it do.
You can see the screen shot at http://hyperion-consulting.blogspot.in/
Regards,
AS
Edited by: Don'tKnow999 on Nov 30, 2012 4:32 AM

Have you given all privileges as per below listing in Oracle Install-Config guide?
It says,
The following privileges must be granted to the owners of the database schemas:
CREATE ANY SYNONYM
CREATE CLUSTER
CREATE INDEXTYPE
CREATE PROCEDURE
CREATE SEQUENCE
CREATE SESSION
CREATE TABLE
CREATE TRIGGER
CREATE TYPE
CREATE VIEW
DROP ANY SYNONYM
UNLIMITED TABLESPACE
Did you have a look at configtool.log as to what errors its having ?
I think the reg.properties will get created if you have all sufficient rights on Oracle database user/schema.
Regards,
Santy

Error while configuring AAD Sync

Hello Experts,
I have one of my customer encountered with issue while configuring AAD Sync tool.
Below is the error message
"An error occured executing Configure AAD Sync task:unable to establish a connection to the authentication service"
Appreciate if any one could help in resolving the above error.
Thanks everyone.

Hello,
Can you give us more information, a log file for example?
The username/password that you use work?
Florent

5800 XM: potential issue while configuring email

Similar Messages

Maybe you are looking for