5D Mark III and SD Card Speeds
Is there any truth to the claims in this link that the SD Card speeds are limited by the 5D Mark III to 133x?
Canon 5D Mark III and SD Cards
Thanks!
Nothing is more simple than greatness ~ Ralph Waldo Emerson
No Richard, sorry not really helpful. It’s a simple question – Does the camera (5D3) default to the slowest card inserted which would be 133x?
If your going to answer questions by supplying links then there is no point to this forum.
Similar Messages
-
Canon 5d Mark III and Lightroom 4.3 tethered shooting issues.
I bought a new Canon 5d Mark III and upgraded my lightroom to 4.3. I have been having issues shooting tehtered. I'll shoot and get some frames coming in and when I start plugging away the program bar will spin and I'll only get a few grey frames and it just kind of freezes. I don't know what to do.
LR4.3 was supposed to improve Lightroom's built-in tethering, but in my experience it still has some reliability problems - especialy in recovering from broken connections (not just unplugging USB but also if the camera loses power by sleeping or when changing a memory card).
Sorry if some of this is basic info, but I'd recommend you try a different USB cable - the cable end that connects to the camera is easilly damaged in a way that makes a connection possible, but unstable (I strongly recommend finding a cable with a 90 degree downward bend at the camera plug). Also, we often have to send a camera body in to have the USB port serviced. Canon has begun to provide a small rubber boot to reinforce the USB connection at the port, but they won't sell the part outside of a repair service. Be sure to use some kind of stress-relief for the cable at the camera. Tethertools sells one, but I've made mine DIY with a little string and a small binder clip... nearly free. Finally, be sure your cable is less than about 15 feet. If you need to go longer, I've successfully tethered with two cheap powered repeaters from Monoprice, but no single link should be over 15 feet.
Oh yeah, also set your camera to not sleep for a long time.
Beyond all that, is using EOS Utility for capture and LR Auto-import a viable option for you? It works very well for me. I use the Apple "Image Capture" app to tell my system to launch EOS Utility whenever the camera is connected - and set EOS Utility to launch into remote capture/camera control mode. It's very stable and recovers from disconnects or camera power loss and the remote camera control/live view can be pretty handy.
Another plus is that if you do need to disconnect USB and shoot to card, you can just copy new images from the card to your watched folder and they are imported to Lightroom with the same settings and location.
The only downsides for me is that there is no way to have a crop apply to new images using auto import -- and I have to re-save my develop preset each time I make a change. Using the "Same as Previous" option under develop settings in native tethering is so great for this and I'd love to see a similar option added to auto import.
Hope this helps.
-Andy -
I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
EOS 5D Mark II
CR2
5.2
2.2
EOS 5D Mark III
CR2
6.7, 7.1
4.1
Photoshop CS6
7.0
8.3
Photoshop CS5
6.0
6.7
Photoshop CS4
5.0
5.7
The 5D Mark II was first supported by Camera Raw 5.2 which is compatible with CS4+.
The 5D Mark III was first supported by Camera Raw 6.7 and 7.1 which is only compatible with CS5 and CS6.
So the CS4 will never be able to open Raw 5D Mark III files.
Why doesn’t my version of Photoshop or Lightroom support my camera?
Choices:
Purchase CS6 full version (CS4 is too old to qualify for an upgrade)
Join the Cloud
Free option: download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG) -
I just bought the canon 5d mark iii and my photoshop elements 10 won't read my raw files. I want to buy photoshop elements 13 but want to make sure my camera is compatible with it first. Thank you for your help!
Photoshop elements 10 should be able to open those files if you update to camera raw 6.7
Which operating system are you using?
windows
Adobe - Photoshop Elements : For Windows : Camera Raw 6.7 update for Elements 10
mac
Adobe - Photoshop Elements : For Macintosh : Camera Raw 6.7 update for Elements 10
Also, photoshop elements 13 will open those files as well. -
Hi Mark, I have lightroom and Photoshop CS6 and worked with it with my old camera, Canon 60D and had no problem
now I got me a new one, Canon 5D Mark iii and I can import the images into lightroom but I can't not send it from lightroom to photoshop. Also tried to drag and drop the picture image directly into photoshop but it wouldn't allow me to do so.
What do I have to do to get that working?In Bridge, go to Edit->Preferences->File Type Associations
-
Canon EOS 5D Mark III and Tamron lens
I have just ordered a EOS Mark III body and a Canon 70-200 F/2.8 II USM IS lens. Now I want a wide angle zoom lens to complete the package. I'm interested in a 24-70 f/2.8 lens. Canon's version does not have an image stabalizer and is over $2000. Tamron offers the same focal and aperture in their 24-70 f/2.8 with an image stabalizer for around $1300. Are there any issues concerning using a Tamron lens on a Canon body?
Really folks, when I joined this forum I had no idea it was for only Canon related issues and did not mean to insult the hosts. I am a Canon gal. I also own a Canon 7D. I wish all my equipment could be Canon. I have just spent a great deal of time and money researching and purchasing a Canon 5D Mark III and the Canon 70-200 F/2.8 II USM IS lens. I don’t want to settle for less. But now to complete the package I really want a 24-70mm f/2.8 lens. I would have no doubts whatsoever about the Canon even at their price if it had IS. I do not want to regret not having the f.2.8 as I may be in some low light situations during my travels, or the IS as I may not be able to handle a camera and lens of that weight without a tripod. I bought the best tripod I could find made of carbon fiber( I won’t mention the name). It is compact, very light and has a load capacity of 25lbs. I plan on using it most of the time but there will be times that I just won’t have time to set it up.
I have read a lot of reviews and 90% of them regret not having IS. After comparing the Tamron with the Canon on other sites that test different products, there didn’t seem to be too much difference in performance of either lens. Canon was favored as it should be, but for the price comparison and no IS it failed to make that big of an impression. I think the manufacturers of Canon know this and will probably come out with another version that includes IS. As Bob said…“if a competitor's lens is well regarded for whatever reason, it's in Canon's interest to know that and to understand why. And if a Tamron lens makes a 5D3 affordable by someone who would otherwise buy a Sony, I think Canon would gladly take his money.” That’s an excellent point. And Bob, I have considered the Canon 24-70 f/4 but I really feel that maximum aperture over the total focal range is a plus that only 2.8 can give.
Ebbigs 1, I have considered the Sigma 24-70 f/2.8 but it doesn’t have IS. The price certainly is appealing, but the Tamron even though more expensive is a better lens (from what I‘ve read). I do agree about the L quality and durability of the Canon lens however and I would buy it if not for the IS. I am getting ready for a long trip and am in need of a wide angle zoom lens as soon as possible.
I came here to find out if anyone knew if there were any issues with the Canon mount accepting a Tamron as I have never used anything but a Canon lens on my Canon cameras. Thank you for reading my rather long winded response and I apologize if I have offended anyone. -
Will my 5D Mark III and 580EX function together seamlessly?
Been playing/testing the functionality of my 5D Mark III and 580EX (not 580EX II). The camera doesn't seem to recognize ETTL from the menu. Are there limitations between these two devices?
Hello jdd1701,
The Speedlite 580EX II and EOS 5D Mark III are compatible in every way they can be, meaning any EX Series Speedlite will work with any EOS camera. You wouldn't be able to adjust the settings through the camera menu like you would with, a Speedlite 600EX, for example.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Service Notice - EOS 5D Mark III and EOS-1D X: acquire focus when using Speedlite's AF Assist Beam
Hi everyone,
We have an update for the EOS 5D Mark III and EOS-1D X focus when using Speedlite's AF Assist Beam topic. The estimated release date for the firmware update for the EOS 5D Mark III digital SLR camera is late April. 2013 and the estimated release date for the firmware update for the EOS-1D X digital SLR camera is late May 2013, as noted in the following product advisory:
"Service Notice: EOS 5D Mark III and EOS-1D X: acquire focus when using Speedlite's AF Assist Beam."
Thanks again for your participation feedback on our Forum!I just hope Canon remembers there are users of the product worldwide and not just Costa Rica and the USA....
Everyone should have their relevant update released at the same time and never mind contact your local support for further advice...! it should apply across the board
EOS 5D MKIII + EF 24-105mm f/4L IS USM, Sigma DG 150-500 5-6.3 APO HSM, , EF 55-200mm 4.5-5.6 USM, Speedlite 430EXII
EOS 350D, EFS 18-55mm -
IPhone and Canon 1DS Mark III and Nikon D3
Neither Apple's iPhoto or Aperture recognize the top of the line Canon Mark III 1DS, or the Nikon D3. I have tried to import RAW images from both cameras to no avail. What is the delay?
Thanks, NormI believe that RAW support for the Canon Mark III AND the Nikon D3 was just added in OS 10.5.2 release
http://docs.info.apple.com/article.html?artnum=306835
LN -
Can't upload from Canon Mark III 5D CF card
I can't upload my photos from my Canon MarkIII 5D's CF card. The images are not able to be previewed and I can't seem to get them uploaded any other way either. HELP.
What am I doing wrong?The 5D Mark III was first supported in Lightroom 4.1.
The last version 4 ever released by Adobe was 4.4.1 so ensure you're running 4.4.1.
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 4.4.1 -
Mac Lion 10.7.3, LR 4.1, CS6, Canon 5D Mark III and all the plug ins upgraded! Need the RAW update!
My workflow has tripple because nothing wants to run smoothly! I am so bent because Adobe, Canon, Apple and every other plug-in software provider can't seam to get on the samer fricken page and I've spent BIG $ over the last 2 months trying to make everything run better... Where is the latest RAW?
I Purchased the Upgraded Adobe LR 4.1, CS6 Beta & got the Canon 5D Mark III, Mac Pro server update to Lion, WHEN is next dot release Camera Raw? My workflow has trippled in time because of this issue. I'm so frustrated with having to convert images in a slowed up piece of crap canon software package and then wait another decade for the newest LR to load the images I could crap fire! Come on Adobe, where's the release? After a few grand you'd think we'd get a better response time. As for Canon, they are not consistant with community software sharing and can kiss my *!! because to leave Adobe hanging sux!
There should be new laws that penalize jerks that screw with workflow!
Time is money, let's go Adobe!Let's see:
5 Minutes of research would have told you about 5DMKIII support availabitliy but that is too much time to spend additionally researching a 15K purchase.
You paid 79.00 for the LR Upgrade and 14,000 plus for the rest of the package.
You bought a camera that was released after the 79.00 software.
You are using a Public Beta for the other software (no cost to you)
A Camera Raw release candidate with support is availabe. I(again no cost to you
Yet you say:
"Come on Adobe, where's the release? After a few grand you'd think we'd get a better response time. "
So far, you've paid 79.00
Finally: this is a user-to-user forum-not a direct conduit to Adobe. -
Canon EOS 1Ds Mark III and Aperture 2?
I was wondering if anyone using a Canon EOS 1Ds Mark III can confirm if they're able to shoot tethered using Aperture 2? Though it's listed under the RAW support page, this model of camera is not supported in the knowledge base article called: Tips on tethered shooting.
I tried the demo and though it registered my camera, it wouldn't allow me to capture. Not sure if it's a limitation of the demo, or ignorance on my part. If you know for certain one way or another, please share.
Thanks.To the best of my knowledge the tethered shooting does not work with any of the newer Canon DSLRs. A workaround that may be good for you is the Aperture hot folder script that I used with Aperture 1.5. If you can't find t just hit the thread back.
RB -
Canon 5D Mark iii and Lightroom 3
I recently got a Canon 5D Mark iii. I have Lightroom 3.0 and I cannot open the images in Lightroom. Do I have to upgrade to Lightroom 4.1?
Yes, but you will find it easier to upgrade to Lightroom 5. That is the current version. Your other alternative would be to download the DNG converter and convert your raw files to DNG. The choice is yours.
-
Problem with S-raw from 1Ds mark III and Lightroom 2.5 (ACR 5.5)
Hello,
We develop over 100000 Raws per day using Lightroom 2.5 and a Canon 1 ds mark III. For the past six months we have been using the S-raw format for compatibility with our program Workflow. We’ve been having stability problems linked to luminosity, particularly differences in yellows, reds, oranges, and beiges.
This artefact lightens the whole of the image, which gives us several light densities within the same image series.
We’ve done several tests with photos shot in S-raw and JPEG simultaneously. The problem does not appear in the JPEGs, or in JPEGs generated by the S-raw format.
This is why we have concluded that the problem comes from Lightroom’s calculation algorithm for S-raw. This hypothesis is confirmed as the problem is only in Lightroom 2.5 (we’ve tested 5 competing programmes and have not had the same problem).
Ciao.Problems with Lightroom should be posted in the Lightroom forum.
If you are having similar problems with some version of ACR, check the FAQ (http://forums.adobe.com/thread/311515?tstart=0) and provide more details, samples, etc... in a later post. -
Canon 1Ds Mark III and Aperture - MJK
Just starting using new Canon 1Ds Mark III with Aperture. I am a new APerture and new Apple user.
Photos import fine into Project. When I do any adjustments the photo gets completely distorted in the viewer. It is mostly white with pieces of the photo. Completely jumbled with mostly white space. Photo still emails fine, can't get my Epson 2400 working yet, so not sure about print. Anyone have any answers?
THANKS!!!Hello:
Today I experienced same problem with the pictures. Happened right after I downloaded pictures (RAW) I took today. I used a Canon 20D. The problem went away when I shut down Aperture and re-started it. Hope it works for you.
Dex
P.S. In my case, Aperture keeps getting buggier and buggier.
Maybe you are looking for
-
My bookmarks are really gone from my computer but I have them in my android phone. I've tried to use this sync but it doesn't work. How can I get them back to the computer from my android phone ? I have checked also backup files but they are really g
-
I am unable to update the newest version of itunes because I need to update my Mac OS X to version 10.6 or later but my computer keeps telling me that I do not have any updates available. I am currently running version 10.5.8
-
Converting contract to sales order does not auto create schedule lines
Hi When I convert quotation to sales order, then schedule lines get auto created. But when I convert contract to sales order, then schedule lines don't be auto created. Instead, a confirmation screen for proposal delivery date pops up for every line
-
I think I'm getting too old for computers. I have an IPod Nano and frankly I'm at a loss to remember how to sync the Ipod to my PC. Because of this I have re-set the iPod at present I'm going nowhere HELP!!
-
How can i take input from user?
class input{ public static void main(String args[]){ int i,j,result; //i want to take input here from user. result=i+j; System.out.println(result); }