5s How to determine which version of operating system is currently installed
How can I determine which version of the operating system is currently installed in my 5s without having to go to iTunes using my PC?
Tap Settings > General > About.
Similar Messages
-
How to check which version of flash media server is installed on
Hi all.
Is there any way to check which version of flash media server is installed on my computer?Hi Amit,
Thank you for your reply. But I still cannot find the information in the log files.
Flash meda server 3.5 has three versions: flash media Streaming server, flash media Interactive server and Development server. I would like to confirm which version above is installed on my computer. Is there a way to check for it? -
How to determine which version of USB I have
I was just trying to figure which version of USB my Powerbook Aluminum 1.25GHZ 167 MHZ it has firewire 800 is there an easy way to figure this out. Thanks for all of your help.
Awesome thanks for all of your help.
-
How to tell which version of Mac OS X is installed?
I'm not sure this is the best category for this question but I wasn't sure which area would be the best.
Let's say I have a hard drive attached to my mac (via firewire or usb) and I want to ascertain what version of Mac OS X is installed on it. Is there some way I can look directly into the files to tell? I realize I could look at System Preferences-> Startup Disk. But let's say there is an early version of Mac OS X on the drive and it doesn't show up in the Preference Pane because it wont boot that particular machine.
I hope I haven't made this question more obtuse than it needs to be.
Thanks.If you open /System/Library/CoreServices, you'll find the Finder app. Get info on it and it will be close to the System version. There might be somewhere on the Web that cross-references the Finder version to the OS version.
-
HT1322 how to determine which version of ipod I own.
The only thing to identify the device is 15G on rear and the serial number. I am trying to replace the battery on the device.
If it's a 15GB iPod, it's a third generation regular iPod. Otherwise, click here.
(66996) -
How to determine which CDockablePane in a group is currently active in Visual Studio 2013
I understand that to activate a pane, I can do the following:
dockablePane->ShowPane(TRUE, FALSE, TRUE);
But, in a group of panes, how can I tell which pane is currently active?
For instance, let's say there are 3 groups of panes on the screen. The first group contains three tabs captioned "A", "B", and "C". The second group contains "D", "E", and "F" and the
third group contains "G", "H", and "I".
How would I determine the active pane within each group? (As an example for reference, within Visual Studio in the left pane group, I can currently see the contents of "Solution Explorer" while "Class View", "Property M...",
"Resource Vi..." and "Team Explo..." are within the same group but not active. In the bottom group, I can see the contents of "Output" while "Find Results 1" and "Find Results 2" are present but not active".
In the right group, I can see "MySource.cpp" while "MySource.h" is present but not active. So, I need to know how to request from each pane whether they are the current tab within their container or not.
SteveHi Steve,
Thanks for posting in MSDN forum.
(As an example for reference, within Visual Studio in the left pane group, I can currently see the contents of "Solution Explorer" while "Class View", "Property M...", "Resource Vi..." and "Team Explo..."
are within the same group but not active. In the bottom group, I can see the contents of "Output" while "Find Results 1" and "Find Results 2" are present but not active". In the right group, I can see "MySource.cpp"
while "MySource.h" is present but not active. So, I need to know how to request from each pane whether they are the current tab within their container or not.
This scenerio in your example, we don't need to know the current tab within which tab group. Actually I don't understand why do you need to know that? If you are using
AFX_DOCK_TYPE::DT_SMART model dock pane, the dock pane should be implemented in a internal MFC
CSmartDockingManager
class and it is not intended to be used directly from your code. . You could read the source code of this class at VS installed path-> VC->altmfc->src->mfc->afxsmartdockingmanage.cpp
For the dock pane layout in VS interface, I remember there is a sample named Visual Studio Demo sample in Visual C++ 2008 Feature Pack. You can download it at here.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/b4e6cb6e-e2a8-4e02-9c67-0dc431618157/visual-c-2008-feature-pack-samples-where-to-find?forum=vcgeneral
And the dock pane control implements the core functionality that controls docking layout in a main frame window by CDockingManager class.
https://msdn.microsoft.com/en-us/library/bb983791.aspx
A greate article about using CDockablePane:
http://www.codeproject.com/Articles/493218/Understanding-CDockablePane
Please tell us more details about what you want to do.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I
Thanks, ssprengel!
Updates did not install a version of ACR that would handle the files. I found the link to ACR 8.7 on another thread, but it wouldn't install on Snow Leopard.
Camera Raw plug-in installer
Fortunately I had an available install of Lion, and that did the trick -- ACR 8.7 is now installed and I can see my images! Thanks for your help.
cheers,
Bob -
How to tell which version of OBIEE I am currently using
Hi,
I am patching OBIEE on a server but no-one knows what version it is running. I can't seem to find the exact version anywhere. I know the release is 11.1.1.6 but that is all.
Many thanks,
RussellLogin to Analytics/Answers preferably with the Administrator (generally weblogic) user and click on Administration. You should see the version on the top of the page.
Hope this helps. -
How do I determine which version of Firefox I currently am running?
How do I determine which version of Firefox I am currently running on my laptop? I use Quickbooks Online and I keep getting a message that they will shortly discontinue supporting the version of Firefox that I have.
Help > About Firefox
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.18) Gecko/20110614 Firefox/3.6.18 ( ) = '''3.6.18''' - but that '''( )''' doesn't belong there and Quickbooks Online might be misreading your UserAgent as a result of that ( ) being there.
Try resetting your UserAgent string.<br />
[http://en.wikipedia.org/wiki/User_Agent]
type '''about:config''' in the URL bar and hit Enter <br />
''If you see the warning, you can confirm that you want to access that page.'' <br />
Filter = '''general.useragent.''' <br />
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. <br />
Then restart Firefox -
I've got an older I pad and am wondering how I can determine which version of iTunes I have.
? I've got an older iPad and am wondering how to determine which version of iTunes I have?
The iTunes App on an Ipad is different to the iTunes Application on a Computer.
Krdmgd wrote:
how to determine which version of iTunes I have?
On your Computer... Open iTunes > About > Version.
iTunes free download from www.itunes.com/download -
how do I determine which version of OS I have on my old iphone 3gs--so I can determinw whether I can set up Icloud? thx
Settings > General - About.
If the iPhone is up to date, go to Settings and you will see a setting for iCloud. -
How to determine Which Acrobat DC version is installed? Pro or Std
I need to track which computers have which version for Licensing and update purposes. I use Dell K1000 for tracking and updating. With Acrobat XI, Pro and Standard had different uninstall registry keys so I was able to track them with a simple check for which registry key was on the computer. They would also show up separately in Dell Case stating Pro or Standard. However, With Acrobat DC the uninstall keys are the same and they both only show up as Acrobat DC in Dell K1000. How does Acrobat DC determine which version is installed and how can I duplicate it so I can count used license and install the correct updates?
Pre-Deployment Planning — Enterprise Administration Guide States "
Installing Acrobat DC Standard¶
Acrobat DC products delivered via an ESD EXE download provide one installer that is used for both Acrobat Standard and Professional. The serial number you use determines which product is installed. What’s important to note is that when you extract the Acrobat ESD EXE (Acrobat_DC_Web_WWMUI.exe or Acrobat_2015_Web_WWMUI.exe), you’ll see AcroPro.msi in the output folder. This is the correct behavior. Simply remember to use AcroPro.msi in any command line scripts.
Note
Existing scripts that use AcroStan.msi should be updated."
Both Acrobat DC Pro and Standard have KEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Adobe Acrobat\2015\Installer ENU_GUID {AC76BA86-1033-FFFF-7760-0E0F06755100}
On the laptop with DC standard installed C:\ProgramData\regid.1986-12.com.adobe\regid.1986-12.com.adobe_V7{}AcrobatESR-12-Win-GM-e n_US.swidtag
On the laptop with DC Pro installed C:\ProgramData\regid.1986-12.com.adobe\ is empty
Your guide does not have any information regarding Acrobat DC. Please explain how to verify if Acrobat DC Pro or standard is installed. or explain how to get the ENU_GUID for standard to start with {AC76BA86-1033-FFFF-BA7E. -
I need to determine which version of windows os in on the computer running my application to make some minor adjustments to a subvi. Is there a programmatic way to determine this using Labview.
Or, use the Application property node Application>OS>Detailed Name. Although I can't say anything about its output on other-than-Windows OSes.
By the way, I think you win the "reviving old thread" award today
Dave
David Boyd
Sr. Test Engineer
Philips Respironics
Certified LabVIEW Developer -
How to determine ACR version in Lightroom 5?
I have Lightroom version 5. How do I determine what version of Adobe Camera Raw is installed with it? I want to get a new lens so I'm interested in checking compatibility. Thanks.
In LR, do Help / About Adobe Photoshop Lightroom x.x.x to see what x.x.x version of LR you’re running.
The LR 5.7.1 update, which is the latest one, was rushed out to fix a problem with NX processing, as well as adding Sony Alpha 7 II support. I believe the LR-has-an-update detection does not see LR 5.7.1 as a new update if you have LR 5.7, at least with the serial-number-activated version. You can always download the update from the Adobe Updates page:
http://www.adobe.com/downloads/updates
I myself have the CC-licensed version of LR 5 and I did get an Install button next to Lightroom in my CC Apps list, indicating there was an update, although normally there would be an Update button not an Install button so the CC deployment was slightly off, as well. -
How to specify which version of a function to use
I tried to do what it said, but that resulted in error
PowershellPS C:\WINDOWS\system32> Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfiguration";ModuleVersion="3.4.0.0"}Import-dscResource : The term 'Import-dscResource' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.At line:1 char:1+ Import-dscResource -ModuleName @{ModuleName="xPSDesiredStateConfigura ...+ ~~~~~~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (Import-dscResource:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException
(Btw: The Edge Web browser doesn't show the formatting toolbar in these text editors... I switched to IE to write this)I have this script and the problem is, there's two versions of xPSDesiredStateConfiguration in the wildTextconfiguration HTTPPullServer{ # Modules must exist on target pull server Import-DSCResource -ModuleName xPSDesiredStateConfiguration Node dc { WindowsFeature DSCServiceFeature { Ensure = "Present" Name = "DSC-Service" } WindowsFeature IISConsole { Ensure = "Present" Name = "Web-Mgmt-Console" } xDscWebService PSDSCPullServer { Ensure = "Present" EndpointName = "PSDSCPullServer" Port = 8080 PhysicalPath = "$env:SystemDrive\inetpub\wwwroot\PSDSCPullServer" CertificateThumbPrint = "AllowUnencryptedTraffic" ModulePath = "$env:PROGRAMFILES\WindowsPowerShell\DscService\Modules" ConfigurationPath = "$env:PROGRAMFILES\...
(Btw: The Edge Web browser doesn't show the formatting toolbar in these text editors... I switched to IE to write this)I have this script and the problem is, there's two versions of xPSDesiredStateConfiguration in the wildTextconfiguration HTTPPullServer{ # Modules must exist on target pull server Import-DSCResource -ModuleName xPSDesiredStateConfiguration Node dc { WindowsFeature DSCServiceFeature { Ensure = "Present" Name = "DSC-Service" } WindowsFeature IISConsole { Ensure = "Present" Name = "Web-Mgmt-Console" } xDscWebService PSDSCPullServer { Ensure = "Present" EndpointName = "PSDSCPullServer" Port = 8080 PhysicalPath = "$env:SystemDrive\inetpub\wwwroot\PSDSCPullServer" CertificateThumbPrint = "AllowUnencryptedTraffic" ModulePath = "$env:PROGRAMFILES\WindowsPowerShell\DscService\Modules" ConfigurationPath = "$env:PROGRAMFILES\...
Maybe you are looking for
-
Oracle 10g to 11g Upgrade - Oracle Clusterware problem
Oracle10g RAC (2 Nodes) RHEL 4 64bit Hi All, I have began the procedure for upgrading Oracle Clusterware to 11g. However, during the install OUI was giving me certain error messages like it couldn't transfer the OUI installlogs to node 2. Well, I kep
-
I tried the old fix posted by jscher2000 about "To try to block sites from interfering with the copy action, you can switch a setting under the covers." and followed his directions re the "about:config" and switched the dom.event.clipboardevents.enab
-
N8 music player not recognising music file details
I've been using mp3tag to embed album art in the ID3 tags & also fix the album artist so I can copy the files across to my N8 in windows. It all worked fine before but now the music player just sees them as album artist & album unknown, depite this i
-
Passing Formula field to Subreport
Hi All, I have a date parameter in my main report and in a formula field I am changing the format to string. Then I am linking this formula to the subreport parameter, but when i refresh this report I am not able to see the subreport data unless I cl
-
Diff between xi3.0 and xi/pi7.0
difference between sap xi 3.0 and sap xi/pi 7.0