5th Gen iPod Touch w. iOS 7 not recognized by iTunes 11.1

On Wednesday I updated my 5th gen iPod Touch to iOS 7, and ran the latest iTunes 11.1 update on my MacBook Pro running OS X 10.8.5.
For two days, everything worked fine, but today, when I plug in my fully charged iPod it is not recognized by iTunes.
Some salient facts:
     1. My iPod shuffle is recognized by iTunes without problem when I plug it in to any USB port on my Mac.
     2. I tried all of Apple's troubleshooting suggestions - restarted iPod and computer, tried connecting to different USB ports on my Mac.
     3. My iPod touch will still charge when plugged in to my Mac.
Any ideas? Thanks.

I did try all of Apple's troubleshooting suggestions.  It was the cable - Thanks for the tip!
It didn't occur to me to suspect that my still-new, Apple-brand cable went bad the same week Apple released two major software updates.

Similar Messages

  • I bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    Hey jtom234412,
    Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
    Thanks,
    Matt M.

  • My ipod touch 4g is not recognized in itunes nor does my comput recognize it !! HELP PLEASE... its not the chord

    my ipod touch 4g is not recognized in itunes nor does my comput recognize it !! HELP PLEASE... its not the chord

    Did you already try these suggestions? iOS: Device not recognized in iTunes for Windows

  • My Ipod touch 4G is not recognized by Itunes and by any computer... what can I do?

    My Ipod touch 4G is not recognized by Itunes and by any computer... what can I do?

    Take a look at this link, http://support.apple.com/kb/TS1591

  • Ipod touch 4g is not recognized on itunes,and will not sync

    My iPod 4G will not sync when it is recognized in iTunes, and it will not play some songs that are already on the iPod, and it is not recognized on iTunes now either.

    Hi,
    You can update the itunes software and check, that should work.If not you can also try to reset the ipod.

  • IPod Touch 4th Generation not recognized in iTunes 12

    Before iTunes 12, I would always be able to sync my 32 GB 4th Gen iPod Touch (iOS 6.1.6) with no problem at all. After the upload, it is no longer recognized by iTunes. It's connected, but the iPod icon is nowhere to be found. I restarted my laptop, but the same problem occurs. Can I get some help with this issue. Thank you.

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • IPod Touch 3rd generation not recognized in iTunes

    I just recently upgraded my Macbook software to version 10.6.3 because I purchased an iPod shuffle and the newest version of iTunes would not install with my old software. Now my iPod Touch 3rd generation is not being recognized by the newest version of iTunes (10.2). I have already restarted my computer, and shut it down and removed the battery for a minute before starting it up again. None of these things worked. This is the first time I have tried to sync my iPod touch since installing the new software so I am not sure what I need to do.

    It sounds like this may be the fix:
    http://support.apple.com/kb/TS3540
    (Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart)

  • Ipod touch 1st generation not recognized in itunes

    I did the itunes update last night and i'm using a 1st generation ipod touch for music for my fitness classes. The device is no longer recognized in itunes after last night's update.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with               
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests

  • IPod touch 4th generation not recognized in iTunes

    I've used ipod touch trouble shooting on line help and am still unsuccessful in getting iTunes to recognize ipod touch (even though it has in the past on this same MacBook Pro)

    - Have you tried here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    - Have you reset the iPod. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Tried another computer
    - Does the iPod work OK?
    - Does the iPod charge?
    - Try another cable
    - Try another computer to help determine if you have an iPod or computer problem.

  • IPod Touch and iPad Not Recognized by iTunes

    When I plug in my iPod Touch and iPad, iTunes does not open, but both devices are recognized by Windows 7. When I open iTunes manually, there is no listing for "Device" at all. I have uninstalled and reinstalled the latest iTunes version several times to no avail. I'd appreciate any advice on what I can do to solve this problem.

    Have your tied the troubleshooting here:
    http://support.apple.com/kb/TS1495
    (iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows)

  • Ipod 5th Gen Video 80Gb disk mode not recognized on itunes

    Hi there everyone,
    So i have my ipod 5th gen 80GB video and here's my problem.
    Time ago i had it in a pocket of my backpack that was supposed to be waterproof. We got completely washed in NYC and when i took it out of my backpack pocket the ipod was dead or behaving in a weird way.
    It didn't turn on then i let it dry. After weeks i've been trying to charge it but it seems it had battery problems so i bought a new one and replaced.
    Now the ipod stays on but it keeps restarting showing me the sad face. Then it restarts beginning fgrom the apple logo and the same thing comes up.
    I can put it in disk mode and also in the diagnostic mode thru the key combination.
    I let it sit for 24 hours more or less to the wall charger and the battery seems to be completely full and the ipod stays on, still fiving me the same synthoms. Then i put it in disk mode while downloading the last version of itunes (9). When i plug it in, i hear the sound that windows makes when you plug something via usb. It installs the software and it sees it as an ipod device. But itunes WON'T.
    This appens with every usb port that i have. I can put it in disk mode even plugged into the computer, i hear the windows sound like i just plugged something in but nothing.
    When i reset the ipod, sometimes i see the screen that tells me to connect the ipod to itunes and procede to the restore.
    Sometimes i see the big V and the "ok to disconnect". The if i plug it in with itunes open on my desktop i see the "do not disconnect" but nothing happens, it will not see it yet.
    After 30 secs more or less, the ipod restarts again on its own showing me the sad face.
    If i turn it off it tells me "very low battery" but i don't know if this last one statement its important or not.
    I know already that all of my music and videos are gone. I just would like to get to the restore step then i'll start over again loading music and videos.
    What kind of problem do you think it has? Is there another hardware component damaged that needs to be replaced?
    Is there a solution for this kind of issue?
    Of course i've been following ALL the apple instructions on the website, the 5 R's and so on but nothing worked.
    I really hope that someone in here could give me an hint because at this point i really don't know where to crush my head
    Thank you so much for your time!

    I'm having the same exact problem. When I first started using Vista it was fine, but now all of the sudden it will do nothing with My iPod and it kind of angers me.
    Compaq Presario   Windows Vista  

  • New iPod Touch 2nd Generation not recognized in iTunes OSX 10.4.11

    Hi anyone,
    I have problem that my new iPod Touch 2nd Gen, it won't recognized in iTunes. iTunes already updated to 8.02. My macbook OS is OSX 10.4.11. All software updated.
    if i tried with different machines with Leopard installed, it's recognized.
    Does anyone have same problem with me ? What should i do to overcome this issue ?
    Please, do not suggest me migrating to Leopard
    Thank you in advance.

    Hello and Welcome to Apple Discussions. 
    You may need to restart the AMDS. Have a read of this article:
    http://support.apple.com/kb/TS2050
    Let us know how you get on
    Merry Christmas
    mrtotes

  • Ipod touch 4gen is not recognized by itunes PLEASE HELP

    I recently restored my ipod Touch 4th gen on itunes 11.1 (On a PC windows 8.1 64-bit) but after doing that I updated itunes to 11.1.4.62 . Now my ipod will not sync or show any sign of connecting to itunes even after I put it in recovery mode. I tried everything in itunes' troubleshoot guide but none of that worked.  I am running out of ideas please help

    renefromnl wrote:
    I now own a second hand unit ipad3 but I cannot activate
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.
    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818

  • IPod Touch 3rd Generation not Recognized by iTunes but recognized by Windows as "Apple iPod"

    Exactly what the title says. My iTunes will not recognize my iPod touch, but my Windows Vista will recognize it with autoplay. I updated iTunes about 10 minutes ago, tried two different apple wires, and 3 different USB ports that work. Can anyone help me fing a solution? I found the iPod Touch assistant thing and tried all of those steps but the problem recurred. Thank you in advance!
    -Dylan

    I have the same problem. My Iphone 4s works fine when docked to PC. PC won't recognize my 3rd Gen Nano. Same goes for my Work PC. They don't recognize it nor will plugging it in to a PC charge it. I have to plug it into wall socket to charge.
    I have tried resetting, I have tried downloading newest Itunes.
    Must be the Nano itself if it doesn't get recognized by mutliple PCs?
    I haven't used the Nano for probably 2 months. Previously it worked fine...
    One thing, when docked to my laptop during a reboot/startup, it intially starts to charge the Nano, but once setup is finished it doesn't recognize it any longer...

  • IPod touch and iPad not recognized by iTunes or computer

    I have both an iPod touch (4th gen maybe?) and an iPad. A few days ago I synched both earlier in the day and no problems. That night I downloaded the latest iTunes update and when I tried to synch both devices nothing happened. The computer will charge the devices but they don't appear on iTunes or the My Computer.
    I looked thru the discussion board and I went thru the steps of restarting my AMDS, that didn't work. Then I uninstalled and reinstalled iTunes and Quick Time and nothing happens. iTunes works fine. My library is intact but it won't recognize my devices. I've had my iPod touch for a little over a year and my iPad since this past Christmas with no problems until now.
    Thank you.

    Thanks for the response but this didn't work for me. I went thru the whole comprehensive set of steps and still iTunes doesn't recognize either device. I'm not sure what else to do. My husband thinks I should restore the computer to an earlier date prior to the last iTunes software update. Not sure what else to do. For now, both the iPod and the iPad work fine. I just can't synch them.

Maybe you are looking for

  • I carnt send texes but I can make calls

    I carnt send texts but I can call people any1 know way to help as new to iPhone 4 s

  • Canon Pixma PM 180 - I'm unable to scan

    As I said at the topic subject, I'm using canon pixma MP 180 multifunctional (printer+scanner). The printer works great but for some reason I can't get the scanner work on Leopard 10.5.2. When I try to open the MP Navigator EX, this error message pop

  • Paste In-to-Out?

    Hi and thanks to all for stopping by! I just want to Paste IN-TO-OUT. Is this possible? I have tried the usual - setting in/out points, but paste only adheres to the entirety of what has been copied. Sorry to bring it up, but in Avid, you can see the

  • J2EE question.. ftp in a session bean

    Hi guys, pretty new to j2ee. I need to make a system that retrieves some files using ftp and manipulate teh files and return to a servlet the link to file (which will live on a webserver). I read that java.io package should not be used with ejb's. th

  • How to deploy the goldengate on EBS R12

    EBS : R12.1.1 ORACLE DATABASE : 11.1.0.7 OS version : AIX 6.1 The source environment and the standby enviroment are the same. I want to know how to deploy the goldengate on EBS R12 , not for reporting , only just for Disaster recovery . I have read 1