5th gen ipod won't connect to usb 3, is there a fix?

I have an ipod video (5th gen), and it won't connect to my new asus laptop since it only has usb 3 ports (I don't care if it will charge or not, I have a dock), my question is whether it could potentially connect to my computer so I could sync it if I use a usb 2 hub or something similar. My ipod recently formatted itself when it forced a reset, so I have to get my music all back. Anyone know a fix to it? Thanks for any help you guys can give me, really driving me crazy not having music to listen to when I'm out...

You did install the latest version of iTunes on your new computer, correct?  Installing iTunes is how the software needed for iPods to be recognized as iPod gets installed.  Otherwise, Windows sees it as a generic device.
https://www.apple.com/itunes/
If the iPod is recognized by Windows, but not iTunes, you should go through this trouble-shooting document.
iPod: Appears in Windows but not in iTunes - Apple Support
FYI - My 3rd gen iPod from 2003 works fine with the latest iTunes; there's no such thing as an iPod that is too old. 

Similar Messages

  • 3rd gen ipod won't connect with firewire.

    3rd gen ipod won't connect to itunes with firewire. USB connects rarely but drains battery quickly. I've rebooted the ipod and computer and updated itunes. No effect. Any remedies besides buying a new ipod.

    Answer to Question 1: - I connected the iPod with the USB, went to Disk Utility and erased the iPod. Now the iPod works with USB.
    Question 2 is still unanswered. Ideas?

  • My 32GB 5th gen iPod won't sync

    My 32GB 5th gen iPod won't sync. There is still over 10 GB free and my itunes is only 17 GB yet it won't let me sync anything. Can anyone help?

    My ipod 32gb 5th gen will not sync to itunes or any mac computer. An error message appears saying that my ipod touch requires itunes ver10.7. Does anyone know how to get this on my ipod touch 5? I cannot find it, does it need to be installed onto my ipod from a computer?

  • TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

    why doesnt my 5th gen ipod nano not connect with windows 8?

    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • 5th gen iPod won't show iTunes U

    using an iTune 10 (latest update), and synching with the 5th gen iPod. The synch goes well and when connected to the iTunes i can see the iTunes U on the list but when I disconnect and I can't find iTunes U on the iPod lists and menus... I read in a related post (about 5th gen iPod nano) a reply asking if the guy had set the files to have the 'iTunes U' mediatype. What does it mean and how do I do that?

    Have you set the files to have the 'iTunes U' mediatype?

  • 5th Gen ipod won't sync a video podcast

    I have a 80GB iPod, only a month and a half old, 5th Gen.
    Thing is, I downloaded 5 video podcasts today, all from the same author.
    One of these podcasts WILL sync onto my iPod, however the other four won't, saying that the video format isn't supported, when all five videos have the same format and type.
    I have tried everything from renaming them to converting them and still nothing works.
    Can anyone please help? :]

    I am having the same problem. The difference is that mine was syncing and then suddenly it won't sync anymore. Hope someone answers your question.

  • 5th gen ipod does not connect to mac desktop or itunes

    My ipod does not connect with my desktop or itunes (ie when I plug the ipod in using the original USB cable nothing happens--no charging no recognition that it has been connected). My nano does work with the same cable so I know it's not that. I've followed the support instructions resetting, downloading the latest software and restarting. I cannot, however, restore since the first step of the instruction is to connect the ipod and wait for it to show in the source list in itunes. It is also interesting that when I use the car charger the ipod does charge and shows the charging icon.
    Any suggestions?

    I guess i can lend my voice to the conversation. my ipod "locks up" when i connect to my computer also. i just updated itunes and have not been able to connect. there is no ipod folder on my computer when i search through ""finder". i have to "reset" it after i disconnect to continue to play it. i have done everything short of "restoring" due to i have over 3000 songs and i'm unable to back up. the manuel refers to a disk to update. i can only play songs, and recharge. need help to.

  • 5th Gen iPods won't sync

    my 60 & 80 gig iPods won't sync to iTunes. When I connect them, they appear in iTunes, but I cannot add or delete music and several of the playlists don't show up on the iPod. My newer 120 gig iPods work fine. This started on 8-8-10. I am running the current version of iTunes.

    I've been having the same problem ever since I upgraded to iTunes 9. Before the update I never had any issues syncing new songs or playlists. I have purchased several new albums and haven't been able to get them synced to my iPod. When I plug in my iPod I get the syncing message and the "Do Not Disconnect" message shows up on my iPod for about 30 seconds to a minute, but when it finishes nothing has been added and the storage amounts haven't changed.

  • 3rd Gen iPod won't charge with USB connector - Is that normal?

    I have the above iPod, and I noticed that when I tried to plug it in to charge it with a newer USB connector it will not charge. It will however, let me update my iTunes music. Is this normal for an older iPod?

    I believe that is correct. That iPod was often called the iPod with 'dock connector', and as this chart shows, won't charge via USB.
    System Requirements.

  • 3rd gen iPod won't connect with firewire...how can I restore it?

    As many others have had this problem, my iPod only charges when connected with firewire. When I connect with USB, it says "Use the iPod Software Updater application to restore the iPod to factory settings"
    When I try the iPod Software Updater, it says I need to connect via Firewire.
    Question 1: Any ideas on how to restore the iPod?
    Question 2: Any ideas on how to get the firewire functional again?
    Many thanks in advance

    Answer to Question 1: - I connected the iPod with the USB, went to Disk Utility and erased the iPod. Now the iPod works with USB.
    Question 2 is still unanswered. Ideas?

  • New 4th gen ipod won't connect to internet

    My sister just bought a new 4th gen ipod touch today. Everything works fine with it except for the internet. Now I own a 2nd gen ipod touch and my internet connection works just fine. Why doesn't hers work? I've tried turning the wifi on and off, and turning the airplane mode on and off as well. Our wifi only works through our computer modem. Is the ipod just not picking up the modem's signal or is something wrong with her ipod?

    - Does the SSID of your router show up in the list of networks available on the 4G iPod? 
    - Have you tried resetting th 4G iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears
    - If SSID still  does not show up on the 4G but does show on and the 2G iPod then I would first restore the iPod from backup.  If still problems then restore the iPd to factory defaults.new iPOd
    - If still not SSID then you likely have a defective iPOd and should make an appointment at the Genius Bar of an Apple store or you could call AppleCare.

  • 5th gen iPod won't sync with iTunes

    I have recently upgraded my iTunes to version 8. Now my iPod won't mount. I get the following error when I plug in the iPod: "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." I've restored at least 6 times and nothing. I have also downgraded to the previous version of iTunes and it still won't work. Please help me. Right now I have a 30Gb lump of coal sitting in my desk. (The restore obviously removed all my music for it.)

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
    Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

  • My 5th gen Ipod won't do anything but show the " Connect to your computer, use itunes to restore" screen. However my computer nor anyone else's will recognize my ipod. What can I do?

    My ipod will not do anything but show a screen that asks to "connect ipod to computer, use itunes to restore" My computer however will not recognize my ipod at all so there is no way to restore my ipod. I am not skilled in computers but if anyone has a step by step that would be great.

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • IPods won't connect with USB hub

    I have a 7-port powered Trust USB 2.0 hub, in which my keyboard, EyeTV, printer, and two HDDs work perfectly. However my iPods are, at best, finicky with it. I have an 80GB 6th gen classic, which some of the time will connect happily and other times won't be recognised. Even more strangely, my shuffle (latest gen 1GB) will barely ever be recognised. When it is, iTunes may or may not be willing to try and sync it, but then the whole app will just hang until I physically remove the shuffle, at which point it instantly starts working again. What's more, these issues can be replicated even if each is the only device plugged in to the hub, and both are absolutely fine if plugged in to their very own port. I have tried restoring the shuffle many many times.
    It's mightily frustrating, and I'd appreciate some guidance on how to rid myself of the issue!

    Well my Shuffle got nicked, so never mind...

  • 5th Gen IPOD - Won't Sync and Not Seen by Windows

    Help!!!
    Tried the 5 R's. I have the IPOD in Disk Mode but whilst it will happily charge, it still is not seen by ITunes or Windows Explorer (though is visible inDisk Defragmenter). I have already un-installed and re-installed ITunes etc.
    Prior to putting it into Disk Mode the IPOD still had my library on it and owuld happily work.

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

Maybe you are looking for

  • Creating a stopwatch in Labview 6

    Good day to all,                          I am trying to create a stopwatch in Labview 6. I'm very new to the program and don't know where to strat. Any help wouold be appreciated. Danien.

  • IPad hooked up to Tv

    Hey, I'm going to be hooking up my iPad up to my TV using the Apple 30-pin Digital AV Adapter to stream movies from the iPad to the TV and I'm wondering if the Apple Remote will work on the Ipad to pause play etc. (normal remote functions)? Thanks

  • Custom fields added on PO header and PO item in ME21n

    hi everybody I have added 2 fields on PO header and PO item level in ME21N screen, everything is working fine but the issue is that if the Customer Data tab page is not opened at the Header Level, the additional fields in Customer Data tab page at It

  • Displaying the PDF ByteStream on to the browser?

    Hi, I want to display a pdf on the browser. I have with me the byte stream, using which I need to display the pdf directly on the browser. Currently, I am storing it in my local file system by creating a file output stream. But its taking a lot of ti

  • IMovie '11 preview/play issues?

    I just bought iMovie '11 for my MacBook (using OS X Lion (10.7.1)), and I am having this weird issue during playback. I have placed PNG images (transparent backgrounds) on top of the main background scenes using the 'cutaway' option. When I do a test