6-Channel Audio not obtained from MB KT4V

KT4V MB doesnot deliver 6-channel audio output through line-in ,mike-in and
My MB KT4V does not deliver 6-Channel audio output using line-in ,line-out and mic-in socket onthe back panel as explained in appendix of Quick User's Guide. ;(
Shyamal X(

Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export.

Similar Messages

Multi channel audio not exporting from fcpx xml as mono to logic always comes in a mixed surround

I have a long edit cut with 24 bit multi channel wav files (i.e 6 microphones on separate tracks but in a single wav file.)
This is very a very common production practice.
when i import into fcpx it defaults to seeing the files as surround. I change this to mono so i can mix and spit the audio between each mic.
The last step in the edit is to hand the mix off to the sound designer in logic.
however no matter how i export the xml file for logic. it always comes in as a surround file again instead of mixed mono files.
it shows up in logic as 6 tracks but all but generally only the top track has a mono mix of all 6 and the rest are blank.
it shows that all 6 are seen as 5.1 surround indicated by the icon.
interestingly if i just import the file directly into logic it comes in as 6 mono files. (the icon for mono showing and all are separate microphones)
Any ideas on how to get fcpx not to export the audio xml as surround? (it seems that it is locked to that on import no matter how i modify after)

Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export.

Win -Files were not obtained from device

Photoshop Elements 4.0
Windows XP
SanDisk SD memory card
I am a beginner. I put the memory card in the card reader. I went to Organizer. I went to "File" -- "Get Photos" -- "From camera or card reader". I could see all the photos from the memory card on the computer screen in the Photo Downloader. In the Photo Downloader, I clicked on "Get Photos". Then I got a message that said "Files were not obtained from device." Then I created a new folder and browsed to it in the Photo Downloader. This time it worked. Was the original problem that I didn't have a folder selected?

Well, I'm guessing here, but many odd things in Elements get cleared up when you reset the preferences. This involces holding down Ctrl+shft+alt when you launch the program and then saying yes at the prompt. It's a bit tricky to get it just right if you have a fast PC but it may be worth a try.
Colin

5.1 channel audio not working

I can't get DVD Player to play 5.1-channel audio. I checked that the DVD is 5.1 channel sound. "System Preferences: Sound: Output" is set to "Digital Out." I have a fiber optic cable to my receiver (Yamaha RX-V457). The receiver shows that it's receiving only two channels. On my old G5 PowerMac the receiver showed that it was receiving 5.1-channel audio. The only things that are changed are the new MacPro and Snow Leopard. Any ideas where the problem could be?

Did you select "Digital Out" in DVD Player's "Disc Setup" preference?

No right channel audio on import from stero videos

When I import files using the import from camera command I loose the right channel from my videos but when import my videos using the import files command and import videos previously captured with FCP 7 the right channel is there. Why is FCP X not recognizing stero videos when importing from camera? Anyone else having this problem?

I have had exactly the same problem. See my posts. I found this happens when creating a camera archive from mini dv. When importing direct into the event (not using an archive), or extracting the files from the archive in the finder and importing directly using import files, it works! Please report the bug to apple.

Audio not importing from PP to AE (5.5)

I am baffled and hope that some one can help. I am working with a third party AE Template (No pluggins) and I have tried several ways but still no audio imports to AE. Original footage is from an HD Camera CF card and was pulled into my Mac as options: .CIF, .CPF, .XML, .MXF & .SIF. The MXL (VLC File) is what I used for import into PP, which works great, however, when I start working in AE, no audio is pulled in. I have check on RAM Preview and even the Waveform is blank in the comp???
Any ideas, project due 7/10/13, starting to panic!
Robert

I did a quick search and found that there's a Canon import utility to wrap all of these files up in a package that can be easily read. You'll find a doc here that explains it.
There are also several discussions about workflow with this camera on the net. There are discussions in the Premiere forum suggesting that a good alternative workflow is to use the Media browser to import your files into Premiere Pro. From there you could right click on a clip and select Create After Effects Composition.
This camera is not unlike others that split audio and video into separate files. Before they can be effectively used in production the elements need to be combined into a single container. That's what import utilities are for.

Audio not importing from MTS files

I have AME CS6, and when I import an MTS video, the audio does not get included for some reason.
After installing AME CC, when I import the same MTS file, the audio does get included.
Does anyone know how to correct this in AME CS6?
First image is from AME CS6:
This image is from AME CC:

Changing the Import method can sometimes resolve these types of issues. With any of the "memory card" cameras, important to use this method -
1) Copy ENTIRE contents of SD card to your hard drive, all folders intact (do not use "transfer utility/conversion" software)
2) In Premiere, use the MEDIA BROWSER to find and import media (usually tabbed at lower left side of Premiere interface).
Hope this helps.
Jeff Pulera
Safe Harbor Computers

HELP!! Audio not playing from microphone recording.

Ok so i have a stop frame animation and have recorded audio for it using the built in microphone, i opened it up today and only 2 pieces of the audio are playing and the others are not. I need help quickly as it is in for tomorrow. When I show wavelengths there is nothing in the ones that are not playing.
Thanks liam

Audio files from iTunes wrapped in Fairplay DRM do exactly what you describe.

Audio not heard from the speakers when iPhone connected to the power cord.

somtimes no audio heard from external speakers at all, when iPhone is connected to the power cord.
The troubleshoot I have done successfully was unpluging the power cord from the back of the iPhone then it rests the audio and audio can be heard through the speakers. This issue needs to be addressed to Apple tech support for permanent resolution.

Tell Apple. This is a user to user forum, we are iphone users like you.
You can call Apple at 1 800 my iphone or supply feedback to Apple at:
www.apple.com/feedback/iphone.html

Why does my audio not play from an imported pptx slide +

I created a slide with Images, animations and audio in PowerPoint (2010) and then imported into Captivate 7 as a single slide*. When I publish the slide into an swf file and play, the follows issues occur:
One of the images does not display as contained in the pptx file - it does however show in the swf file in the same dimensions in alight wood grain image (like pine). This image is in one corner of the slide. The image below is that corner...!
The audio does not play when the swf is played. No audio content is shown in the library list
Also, the program I wish to insert the slides into requires individual slides - not whole presentations (it is not SCORM compliant). What is the quickest way of publishing a multi-slide presentation into individual .swf slides?

reinstall the movie, something crazy may have happened during the download, reinstalling it should fix the problem

Audio not exporting from Keynote to Quicktime

I have recorded a 50 minute slideshow with a voice-over narration in Keynote. There are mp3 sound files on some of the slides, i.e. short clips of various sounds. When I play back the recorded slideshow in Keynote, my voice-over and the sound clips and visuals work perfectly fine. However, when I export my recorded presentation to Quicktime, only my voice-over and the slides are included in the movie, the sounds clips are missing. All of the transitions and effects work perfectly fine in the movie, it is just the sound clips that are missing. No matter how I save the file in Quicktime I cannot get the mp3 sound clips into the QuickTime movie. My computer is a MacbookPro running OSX 10.9.4 Mavericks, using Keynote 6.2. I just bought Quicktime Pro7 to see if that would help, but it did not. Would greatly appreciate advice on how to get all of audio into a movie, I've spent more than a hundred hours on this presentation. Many thanks.

Yeah, me too. Bump. Can anybody explain this behavior?!?

Can't see audio note on my iPhone

When I try to sync the audio notes playslist from itunes to my iPhone it doesn't show up, the options "sync notes' is checked and I can see there is files that are transferred to the iphone because there is less free space, and I can see the playlist is added to the phone in iTunes, but nothing is showing up on the phone.
But if I create another playlist and drag all the notes + a song (normal music file), everything shows in the playlist of the iphone!
Any ideas!?&

What photos and videos?
Photos and videos taken with the iphone have nothing to do with itunes.
You should be importing them to your computer regularly as you would from any digital camera.
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Copying personal photos and videos from iPhone, iPad, or iPod touch to your computer

Whatsapp audio note received cannot play on Lumia ...

The audio notes sent from my friends android use to be able to play audio notes and now it says cannot play this file but videos work ok?
Any ideas why not ?

Hi Thornastor,
Welcome to the forum!
What is the internet connection you're using? Have you tried restarting the device? You can also re-install the application and check if this will be resolved. If it's still the same, you can contact the publisher of the Whatsapp and inform them about the issue. Please let us know the outcome.

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
Attachments:
channel_name.JPG ‏69 KB

No multi-channel audio from DVD Player or Quicktime?

I have the A52Codec 1.7.6 installed. The codec preferences are set to output multi-channel audio. I have my Audio MIDI setup speaker configuration setup for multi-channel audio and the speaker assignment tests are all perfect. VLC plays back files with AC-3 soundtracks in perfect 5.1 multi-channel sound. Final Cut plays multi-channel audio properly as well.
When I watch a DVD, it is decoded to stereo. The dialog on 5.1 always comes from the left and right speakers and never from the center channel. It doesn't matter whether I remove the A52Codec and try again the result is aways the same, 5.1 audio in Quicktime and DVD Payer gets decoded to stereo. It is not that extra channels are missing, if that were true I'd get no dialog at all.
What do I have to do to make the DVD and Quicktime multi-channel audio decode as multi-channel audio and not stereo.

I'm not sure if this will resolve your issue or not, but have you configured it using /Utilities/Audi MIDI Setup ?

6-Channel Audio not obtained from MB KT4V

Similar Messages

Maybe you are looking for