6 channel audio rear, center and sub not work

I wanted to know i there was a tick box or somthing to enable 6 channels of audio, by this i dont mean selecting 5. sound from the speaker setting i have the creative sound blaster LIVE. I know that the problem has something to do with the number of channels being used because this happened before with my realtek drivers when i got my 5. speaker even though i selected 5. set up i needed to select 6 channel audio in a tick boxand this solved the problem but i can not find anything like this in the creative software.
It is strange because in speaker test all speakers are sounding but in games e.g BF2 i am not getting all the sound only from front left and right.
This also happens in music but i can solve this by selecting CMSS but i should not need to us CMSS in games.
Any help or advice would be much appreciated thanx

I have a similar problem - I don't get sound from my sub while using 6-channel analogue output to a reciever. As for the rear channels, there is a slider in the CMSS section of the EAX console, set it to the middle (0%) and you should get sound from the rear as well. Anybody know how to get sound out of the sub? It works when I run the Creative channel test dealio and puts out sound, but ONLY then!

Similar Messages

Center and Subwoofer not work

HI, I'm new to the forums. I installed Vista last week and I noticed that suddenly my Center and Subwoofer output is non existant... is this secondary to the drivers or maybe problems with the speakers? (in other words, is this a known problem with the beta drivers for Audigy 2 or should I investigate the possibility of problems with my speakers)

NFS,
Do this (if a step fails, note it and move to the next):
1) Unplug all the connections between the sound card and the speakers.
2) Plug an 1/8'' patch cable into the rear speaker out on the sound card.
3) Go into speaker settings on the computer and set it to 5.1
4) Plug the other end of the 1/8'' patch cable into the rear speaker input on the speakers and run a test. Rear left and right should come out of the rear speakers
5) Move the plug on the speakers to the front speaker input (keeping it plugged into the rear out on the sound card) run a test. Rear left and right should come out of the front speakers.
6) Move the plug on the speakers to the center/sub input. Run the test. Rear left and right should come out of the center and be muffled in the sub (it may not play out of the Sub at all)
7) Move the plug on the speakers to the rear input.
8) Move the plug on the sound card to the Front Speaker out. Run a test. Front left/right should come out of the rear speakers.
9) Move the plug on the sound card to the Center/subwoofer out. Run a test. You should hear only the center channel out of one of the rear speakers.
Post back with the results and where it failed.
Jeremy

Multi Channel Audio Instrument [Kontakt 2]: Auxes not working?

Hi,
I've searched the forums and come up with several posts about using multi-channel audio instruments, but none seems to exactly address the issue I'm seeing (and being confused by). I'm trying to set up Native Instruments' Kontact 2 sampler in multi-channel mode in Logic Pro 7. I perform the following steps:
1. On an available audio instrument object, I click the input drop-down, select Multi Channel -> AU Instruments -> Native Instruments -> Kontakt 2.
2. When Kontakt 2 opens, I load, say, three different instruments.
3. In Kontakt 2's Outpus area, I create three outputs, labelled "st. 1", "st. 2", "st. 3". I cable these to "Plugin Output 1" and "Plugin Output 2" for st.1, "Plugin Output 3" and "Plugin Output 4" for st.2, "Plugin Output 5" and "Plugin Output 6" for st.3.
4. In Kontakt 2, I assign the output of instrument 1 to st. 1, the output of instrument 2 to st. 2 and the output of instrument 3 to st. 3.
5. Back in Logic Pro, I create two new (stereo) audio objects and assign them to channels Aux 1 and Aux 2 (and name them accordingly).
6. In my Aux1 object, I select its input drop-down and choose Instrument1 -> Kontakt2 3 & 4.
7. In my Aux2 object, I select its input drop-down and choose Instrument1 -> Kontakt2 5 & 6.
Okay, so basically I'm set up now, right? So to test this out, I set the MIDI receive channel of all of my instruments in Kontakt 2 to omni and click on the built-in keyboard in Kontakt 2. I can see the volume level indicators on all three instruments light up. I can also hear all three instruments coming out of my speakers. However, when I look at the environment page where I've created these objects, I find that they're all coming as a stereo sum from the original audio instrument object. The Aux1 and Aux2 objects are just sitting there doing nothing.
What gives?
Dual 1GHz PowerMac G4 (Quicksilver) Mac OS X (10.3.9) MOTU 828

Okay, I found the solution to this, and it's odd enough that I figured that I'd post it just in case anyone else ran into it.
It turns out that the multi-channel thing does not work at all when you play Kontakt 2 from the built-in keyboard (in K2). Visually, K2 still shows all the audio going out on the corresponding channels, etc., but I guess it's summing it and outputting in stereo only when you do that. If you send it data from Logic, it works just fine. So I had this setup correctly all along.

Control center and camera not working on lock screen

On the lock screen my control center or camera sometimes doesn't pull up! Also the touchscreen doesn't work sometimes while just using the phone like when typing or in a game. I've tried resetting it and restarting it! Is this a software bug? Will there be an update To fix this?

Hi Trevor318,
Thanks for the question. If I understand correctly, the touchscreen does not respond sometimes and control center doesn't come up. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Use iTunes to restore your iOS device to factory settings - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

I need to change my current location in my apple ID but i am asked to finish my balance first .. Just 16 cents and its not enough to purchase any item from the app store .. What should i do ?

Help .. I need to change my current location in my apple ID but i am asked to finish my balance first .. Just 16 cents and its not enough to purchase any item from the app store .. What should i do ?

You can try contacting iTunes support via this page and ask if they can remove the balance : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

2 of 4 speakers and Subwoofer not working for Altec Lansing Lucasfilms THX Surround (circa 2003)

I am attempting to connect my Altec Lansing Lucasfilm THX 5.1 sound system to my HP ENVY All-in-one. I think the original audio card for the sound system came on a Dell with Soundblaster.
I have connected the green audio to the jack in the back which only gets 2 of the 4 speakers working (even after configuring the speakers). The subwoofer is connected to the sub jack in the back panel as well and is not working at all. I realize that I am trying to have an ancient sound system work with my fancy new HP Envy. Am I asking too much?? I thought maybe a driver update might be needed. But in theory, if those jacks are available in the back it should work (she says optimistically).
Any suggestions or advice would be appreciated.

Not a problem. Thank you for the additional information.
It sounds like you have the speakers connected correctly. If there is only one connector for all of the speakers, it may be that you will only be able to use two of them. However, I am not certain why the subwoofer isn't working. Is it selected in the Control Panel / Sound? I realize that you said the speakers are configured in the Control Panel, but is the subwoofer separate?
I have an old (2001) Polk Audio set of speakers. I have only been able to get two of them and the subwoofer to work with my new HP computer. It sounds fine without the other two speakers.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

Hi All
Do you know why this behaviour different for subtitution written under cost center accounting.
We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
Thanks
Sonia

Hi,
MB1B is t-code for stock transfer posting.
Stock transfer posting generate FI document using balance sheet account, not P&L account.
Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

When I navigate web with Firefox my Thinkpad trackpoint center button is not working. With other web browsers it works well. Where is the problem in firefox, how to enable TrackPoint center button?

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

Portege M700 - Rotation buton and accelerometer not working

Running Vista business 32 bit.
When I put my M700 in tablet mode, and tilt the tablet to 1side and press the button next to the cursor button it used to rotate the screen to that direction.
it doesnt do this anymore. I
Also noted that all accelerometer utilities, like tilt, shake, and advanced security do not work anymore. hdd motion detection does work.
I've reinstalled from recovery discs and installed original and new version from tablet extension and tvap. Nothing seems to help. I've also installed Windows 7 ultimate 64 bit, it doesnt work there either. Ive actually noticed that it also doesnt work in vista because of it not working under Windows 7.
I'm wondering whether or not my accelerometer is broken or not because it used to work with the original installation discs or is this a software issue?

same problem here with a m400. 3d viewer isn't available in the hdd protection utility, accelerometer not working and rotation not working too. hdd protection is working. i have swapped hard disks with another m400 (on which these tools are working okay) the result is- they don't do on this m400- if i put the harddisk back it does work again- so this seems to be a hardware problem (at least with mine)-
to give you a workaround- use the 4-way joystick on the tablet- push for as logn as a second or two and the windows mobile device center will occur here you may easily change display orientation.

Wireless network and bluetooth not working on touchsmart 600

This has not worked since day 1 and I have been using wired internet.
I really need to setup a home network and need to use wireless.
Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
Please advise

Hi coffee12345,
Welcome to the HP Forums!
I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
What is the Product and Model Number of your desktop?
What version of Windows are you using?
Is this a recent issue, or has it been like this since day one?
Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
Please re-post with the necessary information, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My Ipod touch 4th generation is not working, its frozen, ive tried everything and its not working, its just frozen on an app and i really really need HELP!!!

My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

You should copy everything from your old comptuer to your new one.

Keyboard and Trackpad Not Working; Mac OSX Unexpectedly Quit?

Hey everyone... I think I may need to stop by the Apple store to figure this one out, but I just wanted to make sure if there was anything I could do on my own first.
So basically, on my MacBook Pro that I got nearly two years ago (late September of 2006) for the past month and a half has had problems. In the beginning, the mouse and keyboard would freeze up and just not work. Restarting the comp did nothing. Some times were worse than others (once it was frozen for 1.5 hours). Then it stopped, every now and then having a few freezes (sometimes when the keyboard froze but the trackpad was still good), but two days ago I had my comp not hooked up to an adapter. When the battery got low, the comp froze. I went to bed and closed the laptop, and the next day it was still frozen. I unfroze it, but then it happened again (I'm pretty sure the same situation... almost no battery)... and it is still frozen, even after multiple restarts.
Also, during the time when freezes weren't as bad, sometimes the keyboard would get stuck on one key, usually the volume up button (very annoying)... then I was told to restart the comp. When I came back, I was told that Mac OS X had unexpectedly quit.
Sorry that was a lot to read, but any help is really appreciated! Thanks!
Not sure if this is also important, but I did spill some water on the keyboard a very long time ago (late December '06)... it wouldn't take this long for that to cause the problem, would it?

Does booting up in [Safe Mode|http://support.apple.com/kb/HT1455?viewlocale=en_US] help at all? This boot mode checks the disk on startup and disables non-apple start up items and certain kernel extensions.
Steve

My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

My iPhone 5 rear camera was not working, now the rear camera is also not working. I have procured the phone in 2012 from San Fransico. USA Can anyone help me, please?

No one here can help you. If your phone is no longer under warranty, a third-party repair shop will most likely be your best bet. You can't mail the phone to Apple, in the US, as Apple does not accept international shipments. You could mail it to a friend/relative, in the US, & they could take it to an Apple store for you. Some Apple stores repair iPhones. Otherwise, you're looking at an out of warranty replacement.
Good luck.

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

6 channel audio rear, center and sub not work

Similar Messages

Maybe you are looking for