60 fps playback problems on youtube

Earlier I was having trouble exporting videos with CS5 to play at 60fps. Now , they actually do export at 60 fps - but when I upload the video to youtube the playback fps is way slower. What's the deal ?

I just uploaded a 50p sequence and it runs as it should run.
Use the advanced upload option.

Similar Messages

  • Why am I having imbedded video playback problems in Lion?

    Hello all,
    I'm been having problems viewing web videos on my 2011 MBPro 13'' w/ OS X Lion. Any time of web video I have normal sound by the video frames get all jumpy, almost like its less than 1fps. The only web videos that do not have this problem is when I watch a youtube video on youtube.com. If I watch imbedded youtube videos, I have the same skittish video playback problem.
    I have my adobe flash updated and I used Google Chrome as my web browser.
    Anyone else have a similar problem? Fixes? Thanks!
    -Sean

    Two things to keep in mind
    There is a forum for Lion, another for MBP owners, and this is not.
    And yes you will find lots and lots of threads of same.... no one looks at those that were "Solved"
    http://www.apple.com/support/lion

  • Flash player causes real problems on Youtube

    Flash player causes real problems on Youtube site.
    I don't really know if it's a Flash Player problem or a Youtube one but Youtube used to work fine back in like 3-4 months ago, now it doesn't anymore.
    The issues I encounter with Flash player on Youtube are as follows:
    First issue is the fact that after the video completely loads or it loads a big part of it then I click on the seek bar to jump at a specific time that has been already downloaded by the Flash player the video starts loading again from that point on like it didn't actually downloaded that part before. This issue causes big bandwith use since it downloads many many times the same portions of the clip that it has already loaded before dozens of time. If I play a 3 min music clip and click replay or point on the seek bar at the begining of the clip to play it again it loads/downloads the clip again and again and again. If the video clip has over 1 hour then I click play it might entirely load into the player in a few minutes then I click on the seek bar to skip at a certain point it starts loading again from that point on. This is the most anoying thing I encounter with Youtube lately.
    Second issue is the fact that if I click on the seek bar of the player to skip to a specific time most of the time the playback does not start from that point on but it skips back to the last point where it was so I must click several times or keep the mouse button pressed for a long time on the same point in order to play from that place on. This one is again very anoying.
    Third issue is that after the video starts playing in 360p it automatically changes to 720p after a minute or so even if I had checked this setting "I have a slow connection. Never play higher-quality video" in Youtube Playback Settings. I cleared the cookies and chosed several times the same "I have a slow connection. Never play higher-quality video" setting in Youtube Playback Settings but it just doesn't keep the settings on. This one is again very anoying since my computer can't handle well 720p.
    I have reinstalled Win XP SP3 and even installed Win 7 SP1 tried several versions of Flash Player and several versions of Firefox, Chrome and Opera but the same issues occur everytime.
    I haven't encounter any of these issues before like 3-4 months ago.

    I have had problems trying to watch videos on youtube for the past couple of years. It's been almost unbearable, even if I set the resolution to 144kb! Then a few days ago, I went to youtube and couldn't watch at all. There was an error showing that my Flashplayer was out of date, and then a link to Firefox to get the right update. I did that two times to no avail. I had just installed the newest version of Flash Player as of November 2014, yet this error kept popping up. Finally, out of utter frustration, I did like you did, and uninstalled everything related to Adobe Flash. Then I went to youtube, just to see how bad the result would be, and suddenly videos started playing smoother, at higher resolution, and with faster buffering to start out.  Sure, there are some videos that I can't play, and the newest iTunes seemed to have issues without having Flash, but videos aren't frustrating me like they had been on youtube.
    So, yeah, I know what you're saying. I had the same solution work for me. Cheers.

  • IOS Music Player MP3 Gapless Playback Problem

    Hi,
    I've been having this gapless playback issue on iOS now for the past few years, since at least iOS 6 if I can remember correctly. The number one reason I use an iPhone and iOS devices is for gapless playback in the iOS music player. For the last few years I've  been experiencing a bug with the stock iOS music player on my iPhone 4S using iOS 6 and on my iPhone 5 using iOS 6 & 7, and currently on my new iPhone 6 running iOS 8.1.2. This only happens on my iPhones and using iOS, this bug is not found when I use my iPod classic or when playing the same albums through iTunes.
    I thought it might have been spotted by other iOS users and fixed in iOS 7.1 or at least the current version of iOS 8, but instead it's gotten worse, albums that used to play smoothly between transitions now suddenly pause and jump for a split second when changing from track to track.
    What's happening is, I listen to a lot of albums that are continuously DJ mixed and play straight through without any pauses between tracks, and I've been experiencing problems a lot now with random split second pauses between tracks and choppy transitions. These albums in question have been ripped from cd using the latest versions of iTunes.
    For example,
    I'd be listening to an album and it would play gapless and smooth for most of the album, but maybe one or two transitions on the album would have a split second pause between them, and the rest of the album would play perfectly with no pauses, skips or jumps at all.
    This only happens on my iPhone, as I have a 160gb iPod classic and I've listened to all the same albums on it and never has a problem playing the album without any pauses, every album plays 100% smooth and gapless on it.
    I mailed Apple about it through their feedback page on their site... https://www.apple.com/feedback/iphone.html
    Hoping that they would take note of this and try and look into it and fix the issue. That was probably about a year ago now, never got fixed or got any confirmation back from them about this problem. Then last August, I'd had enough and contacted Apple support to notify them about this issue. They told me the usual story, "have you tried restoring the phone?", which I obliged and did. The problem was there on a freshly restored iPhone 5.
    So they told me that they would put me in touch with someone higher in Apple to take the case further, "great" I thought.
    I spoke with a senior care advisor and explained the problem and agreed to send detailed explanations of the issue and test files too so that they could hopefully hear what I was talking about. But after a few weeks of going back and forward, I finally got them to hear the issue with the random pauses, the first week they denied there was a problem and said the files played ok on their test iOS devices, so I myself tried the files on another iOS device and the same problem was there.
    The last correspondence I had with the Apple care advisor was back in the end of August / start of  September, and she told me that they spotted the issue and was told by the tech's that it would be fixed in a future update, I never got a when this would happen, I was just told to make sure my iOS device was up to date with the latest version of iOS. I couldn't speak to an actual technician, got no follow up support, just a vague "We'll look into it." Case Closed.
    I got so sick of this problem that I sold my iPhone and iPad just after this last phone call with the Apple people, and switched over to Android. I'd being reading up on gapless playback music players and found out that there's a good few available for Android devices. I got myself a Sony Xperia Z3 Compact, twice as powerful as the iPhone 6 and half the price. I was using that for the last few months, and playing my music through Neutron Music Player app which is a great music player which plays gapless 100%
    But I couldn't really take to Android OS, seeing as I've been using Apple products for around 10 years now and iOS since the iPhone 3G. So I decided to contact Apple again and see if they'd fixed the music player issue in iOS yet.
    I wrote a long email explaining the problem, how it wasn't really looked at properly, and how I was a long time Apple customer and had to resort to switching over to Android because the basic music player functions on iOS devices have bugs. I took a chance in mailing this to Tim Cook's offices, I knew he wouldn't reply personally, just thought that it might get read by someone in his offices with a bit more say in the matter.
    Just before Xmas, I got a call from someone from executive relations from my local Apple offices about this. He seemed nice and was aware of the problem from reading back through my emails and previous case notes from August when I opened this case originally.
    We had a talk and he said he would get one of the tech's to call me too about this so that I could explain the bugs to someone more knowledgeable about iOS.
    A few days later I received a call from one of the tech's at Apple and was chatting to him, explaining the problem. His response was that he thinks Apple doesn't support gapless playback on current iOS devices. From looking at the gapless playback information page on the Apple support site below, it looks like it hasn't been updated to show any iPhone models after the iPhone 3GS... http://support.apple.com/en-ie/HT201644
    I was trying to explain to him how ridiculous this sounded, why would Apple stop supporting basic functions on their music player on iOS devices? It makes no sense at all? You can see that the amount of hardware devices and software that supports gapless playback today... http://en.wikipedia.org/wiki/Gapless_playback#Player_support
    He couldn't explain either, he just said that because it's not listed there on the Apple support page.
    Then the next day I got the follow up call from the Apple executive relations guy, he was stating that he was speaking to the tech guy that called me and it looks like Apple doesn't support gapless playback anymore, from looking at the documentation on site.
    I told him how stupid this was, and how lots of music players have gapless playback as standard today. And if they don't support it now, then why does it play through some parts of the albums on iOS ok and then just randomly pause, or have jumpy / choppy transitions on the rest of the album. If it was the case, no albums would play gaplessly at all, it would be like when the first ever iPod's were released back in the day with no gapless playback and would pause for a split second between every transition.
    He couldn't give me an answer and said that maybe down the line they would start supporting it again, and that I should request the feature to be added to future iOS versions via the iPhone feedback page... https://www.apple.com/feedback/iphone.html
    He just kept on emphasising that it was "NOT A BUG OR ISSUE", trying to cover up the problem because the info on the site wasn't updated to show the current iOS devices. Which in itself is wrong, looking at the page it says "Supported iPod and iPhone models (make sure you have the latest iPod or iPhone software)"
    iPhone, iPhone 3G, iPhone 3GS only go up to iOS 6, so that contradicts itself when the latest version is iOS 8.
    The info is out of date and needs to be updated. So in August I was told, "we found the issue and will look into it" and a few months later, "it's not an issue", what's a cop out.
    I was annoyed and taken back by this response, and really found it hard to believe that this was the case, Apple stopping supporting their music player on iOS devices. Seeing as iTunes plays everything smoothly and no gapless issues. I just went out and bought an iPhone 6 for €900 / $1060, and for that money you'd expect it's basic music player to work. It's total BS to think that a top computer software / hardware company would just decide to abandon basic functions in their devices, especially when we are talking about how much Apple takes pride in their products and how much more they charge for them over their competitors.
    So this is my next step to try and get this problem seen and out in the open more. The more people who know about it and are aware of the issue, the better.
    Hopefully more people can get the word around and get this noticed by Apple and finally fixed.
    I've uploaded some test files below to show the problem. The files are mp3's and aac, and have been ripped from cd using the latest version of iTunes. The mp3's are the ones with the issue, but the aac play with no problem. If you listen to the transition at the end of track 2 (2-02 Colours (JH Re-Edit)) going into the start of track 3 (2-03 Your Body), you will notice the split second pause / jump. But listen to the aac version and compare it to the mp3 version and you will hear that it plays back fine, just as it's supposed to. Try them in iTunes too and both versions playback fine, no jumps or pauses.
    You can download them here, all links have the same files, I just uploaded them to different hosts for other people's choosing...
    http://s000.tinyupload.com/index.php?file_id=86512332626247919914
    https://www.mediafire.com/?w5wvi50er96b14s
    http://www42.zippyshare.com/v/37047710/file.html
    https://www.sendspace.com/file/lubcmc
    More files can be provided if needed to show the problem happening on various other albums.
    I really hope that people can spot this issue too and help get this fixed, I know this gapless playback feature might not be important to some people, but like I said at the start, it's an essential function for me in a music player and I use it on a daily basis when I listen to music.
    Thanks for reading this long rant of mine, appreciate it.
    Ger

    I believe this issue occurs only between songs that iTunes has converted to a lower bitrate for you during transfer to your iOS device and songs that it has not done this for. Take this Between the Buried and Me album, for instance. I have marked all of the transitions that should have been gapless but probably aren't in red. I know for sure that most of these marked transitions are indeed broken and that the most of the transitions not marked in red work flawlessly... I honestly can't remember whether or not some of these transitions were gapless or not, but the many transitions I do remember working or not working match up exactly with whether or not the songs on either side of the transition were also on other sides of the 256kbps threshold, the threshold at which I enabled iTunes to convert tracks to 256kbps AAC.
    I'm going to try re-sync'ing my library with that "feature" disabled and see if it fixes my gapless playback problem. Will post the results once I test it out.

  • Problem with youtube and other video websites

    I have a problem with youtube and other video websites:
    Everything is up to date (flash, FF, my plug ins..) but i keep getting freezes when the video loads. I can hear sound but i can only see the first frame of the video.
    I've reinstalled flash/firefox or tried updating them again for about 4 times now and my cookies/cache has also been errased which i usually don't do. If i enter FF's safe mode it also freezes.
    I hope someone could help out, i've searched for answer on google before and tried everything i saw but it didn't helped.
    grts,
    agrash

    Hmm, so that person had a conflicting plug in.
    Problem is that whenever i enter firefoxes safe mode which disables every plug in, i still have the youtube freeze/crash

  • Playback problem - video playback stops; any suggestions?

    I have distributed about 20 copies of a DVD I made using iMovie and iDVD v4.x - and about 5 of the discs are reported to freeze during playback. Because not all of the 20 discs have been viewed, it's possible the percentage of discs with playback problems may be even higher. No two discs are freezing at the same spot, or even in the same movie (there are 3 short movies on the disc).
    I got no errors during burning, but I did not 'verify' each disc after burning, either. I did play back my 'master' disc on my home DVD player to make sure it was OK before using it to create a disk image - which I used to burn all the other discs.
    Some of the discs I burned from the disk image using Toast Titanium 6.1.1, until I discovered Apple's Disk Utility was actually a little faster. No way to tell now if the 'bad' discs are all from the same burn software. Though both Toast and DU gave me an option to burn faster than the rated speed, I used the rated burn speed of 8x, and I did not do anything else on the Mac while burning the discs.
    My first thought was bad media. I used both Memorex and Sony DVD-R media (Taiwan) - there is no easy way to for me to find out if all the 'bad' disks are one brand or the other - but hopefully these brands do not have a 20% rate of defective discs.
    My second thought was format-player incompatibilities (-R vs +R), but replacement discs, using the same media on my end, solved the problem for most people (one person's replacement disc froze, but at a different spot than the first one).
    My final guess - I wonder if the playback problems might have something to do with the stick on labels I used? These are a Memorex brand product called "CD&DVD" labels, but the fine print on the back says: "Warning: Using a Standard or Full-Face label on DVDs may result in the disc becoming unreadable."
    Any solutions?
    Quicksilver G4, 867 Mhz   Mac OS X (10.4)   Pioneer DVR-108 (not OEM), firmware 1.20, PatchBurn profile

    I just wanted to add my 2 cents. I haven't been on this forum for months. I've been happily making DVDs in batches of 10 -50 to distribute. I've been making them in my emac. Occassionally I'd get ones that wouldn't play in a client's player. The solution was to send a replacement. Usually that worked. Often I'd send a replacement that wouldn't play in one client's player but found that the disk would play in another client's player. The worst case was when the ist three DVDs I sent to one person wouldn't play, but the fourth did. But most of the time, the second one I'd send worked fine (All of these were made in the same batch from the same media (usually Fuji or Verbatim).
    Recently I started getting lots more than usual complaints about problem DVDs. I checked out a bunch of them by actually playing them on both my computer, and a stand alone Cyberhome player. They were all made from a particular batch of Fuji media. Now I've previously burned hundreds of playable DVDs made from Fuji media, so I imagine it is just a fluke. (I hope) Some of them would play perfectly all the way to the last 5 minutes of an hour long presentation, and then start stuttering. Some begin stuttering in the middle. Several wouldn't even start up in my cyberhome player. Most of them would end up freezing at some point during the stuttering. The stuttering was never at the same exact place on any of the DVDs.
    As an aside, I discovered something that I didn't know was possible. When a DVD froze in my cyberhome player at the menu stage, I'd push the eject button, remove the DVD, and the menu frame was still visible unchanged on the TV until I turned off the player or put another DVD in! I guess there must be some sort of cache in the player that stores the image. Very interesting. I've never seen that with a normally functioning DVD.
    I also played each defective DVD in my computer to compare. One or two managed to play all of the way through on the computer, but most exhibited similar misbehavior on my emac. I'd say that, in general though, they all played a bit better on my computer.
    Then it occured to me that there was another possible explanation. I was burning these from a disk image file that I had stored on an external HD. Whenever I needed a new batch of DVDs I would copy the disk image file back onto my emac from the external drive, and use disk utility to burn the disks. What if the disk image was corrupted? That might explain the problems.
    Another thought that occured to me was the perhaps the process of burning a dozen or more DVDs in a row might cause a heat buildup in the burner and affect the burning in some way.
    So I retrieved a good DVD made in an earlier batch of Fuji, made a new disk image of it, and left the image on the computer and didn't transfer it back to the external drive (on TDK media, because that's all I had sitting around), played the copy back on both my computer and Cyberhome player to make sure it worked perfectly. I then generated another dozen copies.
    You may wonder how I had enough time to do all this. I'd just put a DVD in the player or my emac and listen to it while doing my ordinary office work. If I heard stuttering(it was my voice on the DVD) I'd instantly notice. I did this all day for a couple of days.
    So anyway, I played 5 finished TDK disks all the way through today and they played perfectly. I guess the next test is to use the disk image of the same DVD from my external drive to see if i also get a good burn from it on the same TDK media and burner.
    I did have time to do one other test though. I took a couple of DVDs that played well and put paper lables on them using the stomper system. They still played perfectly on both my computer and Cyberhome player. I'd speculate that paper lables are probably okay if they are applied perfectly, perfect centering, no air bubbles, good contact, and the disk stored in clean dry area. I've seen other peoples' CDs or DVDs with paper lables that had become wrinkled from exposure to high humidity and/or heat. I can imagine that they would tend to malfunction.
    One client with a certain brand player actually took the "offending" DVD down to a AV store, and bought a replacement player that WOULD play it. I do think that it is interesting and useful to know that one brand player will play a particular particular DVD and another won't.
    Since I make batches, I'm considering buying a couple more different brand DVD players, and then doing a bit of quality control - Trying out sample DVDs on all players before I mail out a batch to clients.
    I hope that my observations might be useful for others.
    emac 1ghz superdrive   Mac OS X (10.3.9)  

  • Encoding and playback problem HD files

    Hi all,
    Currently, I'm using a new HD camcorder and have no problem with importing and playing these files is premiere cs4 pro. However, when I'm using six video track at the same time I experience some playback problems. After rendering, the video's play, but not smooth, they  skip frames and playing a few frames back. In other words, it seems that the video playback stutters. The problem still excists when I encode the project to any file (mpeg2-blu ray, avi, etc). When using two video tracks (with two HD video) this problem is not present, even when these video's are in slowmotion. Installing the new update (4.2) did not solve the problem.
    Specs of my system:
    Quad core Q6600 @3.0GHz (overclocked)
    8gb RAM
    >200gb free disk space
    windows 7, 64-bit
    Does anyone have some suggestions to solve this problem? Thanks in advance.
    Regards,
    Jeffrey

    Harm,
    Sorry for not responing for a few days, but I runned the benchmark you'll send me. The main results (dee details attached file):
    53,6,  secs Total Benchmark Time
    6,4,  secs AVI  Encoding Time
    14,2,  secs MPEG Elapsed Time
    33,  secs Rendering Time
    Since the potential problem is my hard disk, inaddition, I runned HDtune (hopefully it will help pinpionting the problem):
    disk1: avarage transfer rate: 94MB/s, acces time 13.8ms, burst rate 185MB/s
    disk2: avarage transfer rate: 85MB/s, acces time 14ms, burst rate 157MB/s
    disk3: avarage transfer rate: 73MB/s, acces time 13.9ms, burst rate 183MB/s
    Analyzing these results, could the current hard disk configuration cause the problem I have, or is my system to slow anyway to edit AVCHD material?
    If the hard disk configuration is the problem, could it be solved by applying your suggestion by removing all partitions? Since, I'm not looking forward of removing all partions(re-installing windows (dual boot win7 and vista), shifting a huge amount of data, etc), but if it would help I will do it.
    Thanks inadvance,
    Jeffrey

  • Hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

    hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

    hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

  • I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it?

    I have a problem with youtube...i can't watch some videos from youtube! They stop after few seconds of playing!! what can i do to fix it??

    Try loading the same video in different browsers (Firefox, Chrome, Safari and Internet Explorer are your best options). If the issue is across all of them, make sure you've downloaded the latest version of Flash at http://get.adobe.com/flashplayer/
    If it's still stopping after that...Do the tried and tested method for everything: reset your router.

  • Mplayer playback problems

    Hello, Mplayer video output is rather jerky and not smooth. I believe its sound related because adding '-nosound' makes the playback smooth again. I've been trying to seacrh for the solution to this for hours; any suggestions? I use OSS by the way...
    Heres xorg.conf
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder62) Thu Apr 30 16:22:42 PDT 2009
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Apr 30 16:21:56 PDT 2009
    Section "ServerLayout"
    Identifier "Default Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "HSD HW191D"
    HorizSync 30.0 - 80.0
    VertRefresh 49.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 8800 GT"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "AddARGBGLXVisuals" "True"
    Option "NoLogo" "True"
    Option "RenderAccel" "True"
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Disable"
    EndSection
    and mplayer-config
    [default]
    ao=oss
    vo=x11
    zoom=true
    fs=no
    framedrop=yes
    ffactor = 1
    cache=9000
    Last edited by pharcyde (2009-05-16 04:40:13)

    apaige wrote:Why the hell are you using vo=x11? That's insanely slow. Use vo=xv.
    Oh - lol, I had that in there temporarily as I was troubleshooting. I'm aware.
    skottish wrote:
    apaige wrote:Why the hell are you using vo=x11? That's insanely slow. Use vo=xv.
    Or, if the nVidia card is new enough (some 8400 and pretty much everything newer), use VDPAU. Otherwise, nVidia chips work better with the xvmc driver than even the xv driver.
    pharcyde,
    From your xorg.conf file, it looks like you have an 8800GT. VDPAU works great with that card. It will solve most of your video playback problems.
    Will do.
    Update: Using vdpau with '-vo vdpau -vc ffh264vdpau' I can play 720p HD with only ~7% cpu usage!
    Last edited by pharcyde (2009-05-17 11:00:28)

  • HELP! Problem viewing Youtube videos.

    Hello,
    I am having problems viewing Youtube videos. Everything was great until the other day. I have not changed anything on my computer to create this problem.
    Diagnosis:
    when viewing videos straight from youtube.com with Safari, it loads and starts to play the video & audio. after the first second the visual video disappears and the audio keeps playing. I can scroll throughout the video, but no picture.
    I do not understand, I have updated everything and still same outcome. It was working the other day fine and then boom, no video. WHAT SHOULD I DO?
    Thank you for you help,
    B

    Sounds like a problem with Flash. I'd recommend visiting Adobe's web site and updating to the most current version for OS X.
    Roger

  • How can I end this annoying problem of YouTube not loading?

    Hello y'all!
    Relatively new to the Mac world here, so go easy on me!  How can I end once and for all, this problem with YouTube not loading in Safari and not being able to watch embeded videos?  I've read various "fixes" and have tried them all, and nothing seems to work.  Help!!  Thanks!

    We have no way of knowing exactly which "fixes" you are referring to...
    Try deleting Flash cookies.  http://machacks.tv/2009/01/27/flushapp-flash-cookie-removal-tool-for-os-x/
    Try uninstalling then reinstalling the Flash plugin. http://kb2.adobe.com/cps/865/cpsid_86551.html#ostype=m,prob1=fnctn,prob2=game,
    Your profile shows you are running v10.6.7. Of that is correct, update your software. Click your Apple menu (top left in your screen) then click Software Update...
    Repair Permissions using Disk Utility.    /Applications/Utilities

  • How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny?

    How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny in Firefox? I tried some suggestions that dealt with entering "about:config" in a fresh browser, but to no avail. I also downloaded an add-on called "Theme Font & Size Changer", but that didn't work either. So, I am reaching out here as that was a suggestion that another user here offered.

    Ah, yes- that is an ultra high DPI (dots per inch) display. This is a known issue in Flash Player, which Adobe is working on fixing.
    In the mean time, you can get some videos to have normal-sized controls by switching Youtube to the HTML5 video player:
    In Firefox, go to https://www.youtube.com/html5 and click the "Request the HTML5 player" button.

  • This content requires HDCP for playback problem! Apple TV2

    Owned Apple TV for two weeks. Two weeks ago, everything was fine for films already in my iTunes library.
    This week, when selecting play on a movie, I get the message 'This content requires HDCP for playback problem' inconsistently. Some vids work, some don't. Then they do then they don't! I have tried on a Samsung TV and a Sony Bravia? Same for both!
    How do I resolve this. I have tried different HDMI ports, turned Apple TV 2 off and on. Tried different cables (Although my HDMI cable is the one I purchased from Apple).
    Any suggestions? Is it something Apple need to fix? This is kinda embarrassing when I tell friends how good Apple TV is, get them round to watch a movie and inconsistently get this.
    Many Thanks for any help
    Dave.

    I too sadly have this handshaking issue. I'm in Phoenix, AZ. Day one buyer for ATV2. Worked all of about two days in terms of streaming HD content from either my MAC or netflix. About the third time i tried to stream HD content from Netflix or Blu Ray digital copies from my Mac, I get the HDCP compliance message stating my display is not authorized.
    I have tried every concievable combination of unplugging and rebooting of TV (Samsung 2005 DLP), ATV2, and HDMI switcher (Monoprice) and nothing will work. My DirecTV HD-DVR works like a charm. If I rent an HD pay per view from DirecTV, no problem. If I rent an HD movie on iTunes, won't display it due to the HDCP issue. I've NOT ONCE had an issue with my DirecTV HDDVR having an HDCP compliance issue and of course its connected to my TV via HDMI thru my monoprice HDMI four port switch.
    I guess the only other thing I could try is exchanging the unit itself. But everything else works as advertised. It feels like this is just a software issue that needs to be patched, and fast.

  • MPEG-1 playback problems

    Hi all,
    I've imported an MPEG-1 file of 70 minutes with the
    DirectMedia Xtra (on PC) and Quicktime (for MAC), but I have a few
    playback problems:
    On PC it works quite well, only the slider won't go beyond a
    certain point in time (about 50 minutes), fom there it always snaps
    back from where you dragged it.
    The sprite script for PC :
    on exitframe me
    if sprite(me.spritenum).movietime >=
    member(sprite(me.spritenum).member).duration -1 then
    go to frame 5
    end if
    end
    On the Mac the MPEG plays very jerky, turning of the "sync to
    audio" helps but then there's no audio off course. The script is
    the same, except the first lines to control the Quicktime playback
    on enterframe me
    sprite(me.spritenum).movierate=1
    end
    on exitframe me
    if sprite(me.spritenum).movietime >=
    member(sprite(me.spritenum).member).duration -1 then
    go to frame 5
    end if
    end
    I've read that the "member.duration" script can cause a few
    problems, does anyone has an alternative I can try ?
    Thanks in advance,
    Gerrit

    Hi Gerrit,
    First, any reason you're not using the MPEG Advanced Xtra
    insttead of DirectMeda
    Xtra? This Xtra is the followup to DirectMedia and is better
    in many ways, one
    being that it is cross platform so you can use the same setup
    for mac and PC.
    I have had jerky playback on the Mac and the issue was was
    bad formatting of teh
    MPEG file itself. You can read more on this at:
    http://xtras.tabuleiro.com/support/technotes/mpeg_advance/ma009.htm
    Best solution was to use TMPGEnc to reformat the MPEG files.
    This program can be
    downladed for free at:
    http://www.tmpgenc.net/
    It may fix the timing issue as well.
    regards
    Dean
    Director Lecturer / Consultant
    http://www.fbe.unsw.edu.au/learning/director/
    http://www.multimediacreative.com.au

Maybe you are looking for