6230i message icon not displayed

This last week or so my 6230i has started playing up.
I can send & receive text messages fine and on receipt of an incoming text the phone give the normal audio alert and box on the screen pops up to say "1 message received".
However after a few seconds that message disappears and the screen reverts to normal but with no message icon in the the top left corner. Therefore if I don't hear the message alert I can't tell I have received a message without going to my inbox to check.
Any ideas why this might be happening and/or will a factory reset solve my problem.
Denis

How much free phone memory does it have? (not free space on the memory card).
If it's quite full try deleting anything large that may be stored in phone memory instead of the memory card. Sometimes clearing out old calendar entries can help too.
Unfortunately there's no way to fully reset a 6230i yourself. A care point can do this but there will be a small charge when it's out of warranty.
Give your nearest care point a call and ask them what they will charge for the reset and update. If you are in the UK try to avoid care points run by the carphone warehouse, they tend to be very unhelpful and pushy.
If you do need to replace your phone the 6300 is a nice low cost replacement for the 6230i.
Message Edited by psychomania on 20-May-2008 09:50 AM

Similar Messages

Error Message is not displayed on the pop screen for chain end chain

Hi,
I have called a screen in one of the standard program using enhancmenets,
and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen
but it is displaying as log , i want the error should come on the same screen and it should not allow till the correct values are entered , how to handle it
regards
afzal

Hi,
have you tried option "LIKE" with instruction MESSAGE.
Example:MESSAGE ID '38' TYPE 'S' NUMBER 000 DISPLAY LIKE 'E' WITH 'My Message'.
And instead of using a MESSAGE instruction, why to not use a popup ?
Like using one of these function modules (for instance):
TMS_BCU_POPUP_TO_CONFIRM
POPUP_TO_CONFIRM_STEP
POPUP_TO_DECIDE
FC_POPUP_ERR_WARN_MESSAGE
etc...
If that does not work, perhaps it's your ehancement which is not the good one or perhaps you have use a second one.
Regards
Mickael

My sent messages are not displayed...what happened and how do I restore?

My sent messages are not displayed...what happened and how do I restore?

http://kb.mozillazine.org/Disappearing_mail

Warning messages are not displayed in confirmation

Hi,
We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
Thank you
Natarajan

Hi Muthu,
Thanks for your reply. We raised the OSS message for this issue. As per the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
In the DELETE mode, the system will display only the first EXPRESS
ERROR message and not WARNING messages.
Inorder to maintain an error message as EXPRESS, the FIELD_NAME
(i.e ls_message-field_name) has to be assigned with the value
EXPRESS.
For example,
ls_message-msgty = 'E'.
ls_message-msgid = 'ZF'.
ls_message-msgno = '000'.
ls_message-field_name = 'EXPRESS'
Kindly note that in the DELETE mode, the system does not display
EXPRESS message with msgty = 'W'.
Only EXPRESS message with msgty = 'E' is recognised and displayed.
The Warning messages will be displayed only during the CHECK mode.
Thank You
Natarajan

SBWP: The content of message is not display

Hi,
The user use SBWP inbox. There the message is not display the content of the message.
There I uninstalled and install again the SAP GUI and Windows, but there has been the same. Only the head of message is displayed.
There can only print the content of message.
What I have to do to display the content?
Regards,
Betta

nyet wrote:
Sir,
When forwarding SMS as email, the content of the SMS is stored as an attachment called <primary_text.txt> file, it's double pain since the receiving person can not read the attachment via Z10 since the device can not open *.txt> file extension.
If it's possible, please restore this functionality back to the way of OS 6/7, which put the content of the SMS in the body of email, since I do rely on this feature heavily.
Leo
How exactly are you trying to forward an SMS as an email?
You can forward the SMS to an email address of your choice and that`s when your SMS will be converted to MMS, and sent to the email address of your choice . The recepient should get your message as "[email protected] carrier.com
Another way of doing it is to select "Share" instead of forward. Then a list of options will open that includes your email address. Select your email address and the selected text message will be added as "body.txt" and after this, you just have to enter the recepient email address and subject line (optional).
The recepient will receive the email with a "body.txt" attachment that can be downloaded and open in or with the "Notepad" on PC

Some Text Messages do not display when using large font on iphone

When using increased font size (accessability function) on iphone some text messages will not display. The iphone just seems to lock up. If normal font size is used text massage displays with out any issue. When font size is increased, text message will not display again.

Hi Peter
Actually, Captivate does have an essentially unlimited number
of undo levels. But that number may appear to be different. The
number of levels starts when you begin editing the project. If you
close and re-open a project, that starts the undo process over.
I've tested and I gave up after about 280 or so undos.
Where Captivate doesn't allow an undo, it normally warns you
with a rather catastrophic looking dialog.
Cheers... Rick

My messages are not displaying, in the body of the message?

When going to mail I see messages but the body of the message does not display.

Try closing the Mail app completely and see if they show when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

IPhoto event icons not displaying in chronological order. How do I fix?

iPhoto event icons not displaying in chronological order. How do I fix?

Have you explored the options under the View -> Sort Events menu?
Regards
TD

LSO_CHECK_BOOKING custom error messages are not displayed

Hi,
Good day! I am currently experiencing some problems displaying custom error messages from BADI LSO_CHECK_BOOKING. I have implemented this Badi and is appending error messages in CT_MESSAGE_TAB however when the message is displayed in portal, the custom message is not displayed. Instead, SAP displays a predefined error "Error When Creating Prebooking with the data entered..."
Is there a way for me to display my custom error message instead of the predefined SAP message?
Thanks a lot.
Cheers,
James

Hi James,
You have not mentioned, which portal you are using. Please see below, that there are differences in the learning and the admin portal:
Learning Portal:
The framework of the existing design of the Learning Portal does not
allow customer specific error messages to be displayed in the portal.
Only a generic message will be displayed when prebooking in the learning
portal if the BADI LSO_CHECK_BOOKING returns an error. The design of the
application does not expect to raise an exception from the BADI. If the
BADI processing is assumed to be unsuccessful, the messages filled by
the BADI will be ignored and a general error message will be displayed
in the portal.
So this is basically a design limitation.
Administrator Portal:
Have you tried e.g. the following notes?
SAP Note 1806593 Admin Portal: Message is not displayed while prebooking
SAP Note 1575238 LSO: BADI LSO_CHECK_BOOKING does not show warning messages
Regards,
Agnes

Wirless icon not displaying, but says I am connected to network

I am a new Iphone user, so I apologize is this a rookie questions. I believe I am connected to my house wireless connected as the name of my network is checked off when I go to settings and Wifi.
My question is, though, why is my icon not displaying on the top left corner? It displays when I am connected at work and everywhere else I was able to connect. Is there something in my settings that I may have checked?
And, does that mean I am not really connected wirelessly?
Thanks in advance for your help!

Thanks, all. So, I just rebooted and there was no change.
Then, as SteveCWatkings recommended, I went into my settings page. I went into the properties page, and there isn't anything listed beside IP address, Subnet Mask, Router, DNS, etc. They are all empty...
*UPDATE*
Okay, something just happened. AS I WAS RESPONDING, I was clicking on each of the fields (IP address, Subnet, etc to see if I could enter information since they were empty. And,when I got to DNS, it allowed me to type something in. Not knowing what to enter, I clicked back and it took me back to the Settings page. So, I clicked on my network again and when I tapped my network, all the fields were filled in, and the icon appeared.
So, now it appears to be connected. I don't know if it will remain connected, or if I had to tap something (DNS?) or if it was glitch, but it appears to be working now.
Thanks a ton!

Utility folder icon not displaying like App folder icon?

Hi- noticed when I drag the system Utility Folder into the Finder Toolbar it does not display similar to the Applications folder - not the Sidebar, but the horizontal toolbar holding the view option buttons (as a favorite item). The Applications folder displays as the same "A"-type icon as in the Sidebar, but the Utilities folder displays as a folder, not the "X"-type icon it appears as in the sidebar. This seems nonstandard- I'd like to see what I can do about having it display in the Toolbar as it does in the Sidebar.
I know, I know, "Why?". I just need to, ok? Otherwise I won't stop thinking about it. Any ideas? Assuming this is the same case for everybody's system, not just mine. I would've posted this in the "OS X System" forum, but it's not really developer related. I'm also guessing this involves going into the icon resources, and making a change to match the resources for the Applications folder, but that's a blind guess. I did a similar change for the slider in iTunes to have it match the Quicktime slider, but not sure in this case, or where to look. Thanks!

To clarify: This is about how the Utility Folder displays in the Finder Sidebar vs. how it displays in the Finder Toolbar (both shown by selecting "Show Sidebar" and "Show Toolbar" in the Finder "View" pulldown menu.
Finder Sidebar, Finder Toolbar:
http://grok.lsu.edu/Article.aspx?articleId=5920
Any folder can be dragged into either space, and without using the Customize Toolbar option. Just drag and drop the folder.
Dragging the Utility Folder into the Sidebar displays it correctly, as its specialized, unique crossed-tools icon. However, dragging the Utility Folder into the Toolbar will not, unlike all other folders assigned with those special icons.
In the Sidebar, certain folders will display as non-folder icons. For instance, under "Places" the Home Folder does not display as a mini Home Folder icon, it displays as a little "house". The Desktop Folder displays as a mini-picture of a Desktop, the Applications folder displays as an "A" made up of a crossed ruler, pencil, and brush.
This is the same for the Finder Toolbar, when you drag one of those specialized folders into the Toolbar.
So, on the left side of a Finder window, you have the Sidebar, with its specialized icons (for certain folders, not all) and along the Toolbar (across the top of a Finder window, with its typical column-view buttons) you will also see those same (or other) specialized icons. In all cases, a folder's icon will display the same in the Sidebar as it does in the Toolbar. Except for the Utilities Folder.
If it isn't already, drag your Utility Folder into the Sidebar, and then, in that same Finder Window, drag it into the toolbar. Not the bar at the top of your monitor screen, but the toolbar of that specific Finder window. You should have the exact same result. The Utility Folder will display as a specialized icon in the Sidebar, but will display as a small version of its original blue folder icon in the Toolbar.
Message was edited by: Jack Gregory
Message was edited by: Jack Gregory

Message Body Not Displayed in Mail on "New" iPad

I first noticed this after I had first turned off Wi-Fi force everything to LTE. The new iPad apparently defaults to Wi-Fi if it is available.
Now, whether Wi-Fi is on or not, only message headers are displayed on the right side of the screen. This applies to new messages as well as those already in the various account inboxes. "Download Remote Images" is "On" and I cannot find any other settings that seem relevant. A hard reset (holding down off /on switch until previous screen content is re-displayed) does not fix the problem.
How can I get message bodies to display again?

Quit the mail app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Error message is not displayed

Hi all,
I am working on Tomcat server and JSP. i have created a web page using JSP and html. when i click on submit button, it should display the next page. if any error is there, it should display the error on the webpage. But, it is not displaying any error message.
It just says :
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Open the localhost:8080 home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
i tried using one undeclared variable and try to navigate to next page, even then there was no error message like "variable not found".......it just gives the error message as above............
I am not able to makeout where i am going wrong, what is the problem.....
I am finding it very difficult to debug.
please help !!
regards
ashvini

.....what is jsp url ?
orginal post of yours...
when i click on submit button........
which means that in your first page, you have a form with an action attribute that points to a jsp - that's what i meant by submit jsp url.
and where can i find <tomcat_root>/log file ???Go to your TOMCAT installation directory, there would be a logs folder under that which in turn would contain your log files.
ram.

Validation error message is not displayed for an attribute as an Input List Of Value

Hi everyone,
I use jdev 11.1.1.7.0
In my application I've created an Entity Obj and a View Obj base Employees table.
for the JobId attribute I've taken actions as listed below:
1. in Employees EO I've created a validation for this attribute and in some cases an error message returns (the error message is "the salary is not high"):
     * Validation method for JobId.
    public boolean validateJobId(String jobid) {
        if (...) {
            return false;
        if (...) {
            return false;
        if (...) {
            return false;
        return true;
2. in Employees VO I've created a LOV for this attribute (the view accessor is JobsViewObj ) and I display the attribute as an Input Text with List Of Values.
in jspx page I drag& drop this attribute as below:
          <af:inputListOfValues id="jobIdId"
                                popupTitle="Search and Select: #{bindings.JobId.hints.label}"
                                value="#{bindings.JobId.inputValue}"
                                label="#{bindings.JobId.hints.label}"
                                model="#{bindings.JobId.listOfValuesModel}"
                                required="#{bindings.JobId.hints.mandatory}"
                                columns="#{bindings.JobId.hints.displayWidth}"
                                shortDesc="#{bindings.JobId.hints.tooltip}"
                                autoSubmit="true">
            <f:validator binding="#{bindings.JobId.validator}"/>
          </af:inputListOfValues>
I open the Popup and I select a row from the Popup list and then I click Ok. After that if the validation method(validateJobId) returns false, the error message("the salary is not high") must be show to the user. but the error message doesn't display. I don't understand why this happens.
Can anybody guide me about this problem?
Regards
Habib

yes, you're right, I've tested it in 12.1.3 and error message was displayed.
it seems it's a bug(bad bug ) in both 11.1.1.7 and 12.1.2. and now what can I do? is there any way to display the the error message?
Regards
Habib

Menu toolbar icons not displayed in colour when deployed on the Web

Hello!
We are developing an application using Forms6i on Windows NT.
Our problem is that menu toolbar icons are not displayed in colour when the application is deployed on the Web using lookAndFeel = generic. This is the case both when using Microsoft IE5 and Netscape 4.5. When lookAndFeel = oracle, however, the icons are displayed in colour.
The icons are stored as *.gif files in the same directory as the application *.html file. It does not help to create a virtual path /web_icons/ in the www listener and edit the parameter default.icons.iconpath in the file Registry.dat.
When running the application as client/server, the menu toolbar icons are displayed in colour as expected.
Any ideas on how to solve this problem?
Regards,
Kjell Pedersen
Nera SatCom AS
Norway
null

Hi,
I got the same problem and I didn't figure out, how to solve this problem.
But did you try to printout the form anyway? I guess you will see the icons on the printout, won't you?
Regards
Dirk

6230i message icon not displayed

Similar Messages

Maybe you are looking for