6230i no modem found problem

When I try to connect to the internet through my mobile and DKU-5 cable it comes up 'no modem found'. When I go to Device manager it says the modem has a problem. Updating the driver just delivers an error message 'there was a problem installing this hardware...'
The annoying thing is it worked fine until I got an autmoatic update for the software. Since then I have had to sort the 'no available connection type' problem (solved with pc suite cleaner).
Anyone with any ideas how to solve the no modem found problem would be much appreciated.
Mike

u just register in this site.now reply to anyone .
do u have same problem  as i have.
reply me

Similar Messages

  • 6230i Bluethtooth modem missing

    I have Nokia 6230i and whenever I try to connect to the interent using Nokia PC Suite 6.84 "Connect to the Internet" option I get a message saying "No Modem Found".
    When I click settings there are no modems to select.
    I have tried uninstalling and reinstalling the Nokia software but I get the same results.
    I have also tried this on a different machine but get the same response. Both machines are HP notepads.

    Hi,
    I also had problems with a USB Modem on my G5. I had to download a file from the manufacturers website (in my case BT) in order to get the modem to work on the mac.
    Once the file was installed the modem was then listed in the drop down menu in the Network Port Configurations menu.
    From there I was able to fill in the relevant username, password and telephone number.
    I must add that I am changing the USB modem for a router/modem as the USB, in my opinion, is not suited to the G5
    Hope this goes some way to help you as I know how frustrating this problem is. Perhaps others more experienced than myself will be able to give further advice.
    Good luck.
    Keith

  • ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate

    ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
    1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
    TABLE NAME - EMP
    Item Containing PRIMARY KEY - P2099_EMPNO
    Primary key column - EMPNO
    By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
    2) Created a HTML region. Within this region add
    text item P2099_FIND_EMPNO
    Button GET_EMP to submit
    Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
    If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
    I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
    EXIST (SQL query returns at least one row)
    select 'x'
    from EMP
    where EMPNO = :P2099_EMPNO
    But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
    Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
    Any ideas?
    Thanks Pete

    Hi Mike,
    I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
    0.05: Computation point: AFTER_HEADER
    0.05: Processing point: AFTER_HEADER
    0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
    0.05: Show ERROR page...
    0.05: Performing rollback...
    0.05: Processing point: AFTER_ERROR_HEADER
    I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
    Thanks Pete

  • Work around for server not found problems on FF36

    I have found a work around for all the people having server not found problems with FF36.
    If you manually set your network adapter DNS to an external DNS server (as opposed to your local ISP) then the problem goes away. I set mine to use the two google DNS servers:
    Preferred: 8.8.8.8
    Alternate: 8.8.4.4
    Not a clue why this works but it is 100% successful on my desktop PC, whereas before I could hardly connect to a webpage with FF36 without multiple page refreshes and much frustration, even though FF35 was fine and rolling back to FF35 was also fine.
    Something has changed in FF36 and either the way it handles DNS or the way it works with some network adapters.
    It is nothing to do with add-ons, profiles or firewall software as I have tried all of these things and only the DNS change made a difference. I even copied over a full working profile and the program files directory for Mozilla from my portable which was having no problems and the problem still existed on the desktop, which is why I started looking at the network adapater since everything else between the working PC and the non working one was identical.
    Hopefully this will help the developers to pin down the real cause of the problem and fix it in the next release.

    Well done. Thanks for finding that.
    That is not only assigned but has an approved patch included in the scheduled Fx36.0.1 release so it should be fixed in few days, watch out for the upgrade.
    * Bug 1093983 - DNS resolver should not use 'ANY' to get cached records for TTL <sup>[https://bugzilla.mozilla.org/show_bug.cgi?id=1093983#c35 c#35]</sup>
    * https://wiki.mozilla.org/Firefox/Channels/Meetings/2015-03-03#Schedule_Update
    With the bug now fixed it would not really be appropriate to add further comment. I do now see another related bug assigned but not being fast tracked, so if all goes well that will probably land in Firefox 39.
    * Bug 1138242 - DNS: Request A and AAAA record types rather than ANY when obtaining TTL on Windows

  • Using techtool pro found problem with "volume structure".  What to do?

    Using techtool pro found problem with "volume structure" and this was not fixed by TECHTOOL PRO.  What do you suggest I do?

    I would boot from my gray install disk (put the disk in the drive and restart holding down the C key). Then choose Utilities and run Disk Utility and click Repair Disk. As always, be sure you have a back up of your data first.

  • [ADF JDEV11.1.1.4] Timezone region not found problem in JDEV

    HEllo,
    I just moved my project to JDEV11.1.1.4 from 11.1.1.3.
    All is fine except for database Navigator.
    In 11.1.1.3, I was able to connect to my Oracle Database from Database Navigator Tab. I just needed to set the Java options -Duser.timezone="+01:00" to my project to resolve the timesone region not found problem when running my app onto the embedded WLS.
    In 11.1.1.4, I can run mu project fine with same Java options but I cannot anymore connect to my DB using Database Navigator.
    I got the famous ORA-01882: timezone region not found error.
    I tried adding this line into ide.conf:
    AddVMOption -Duser.timezone="+01:00"
    but still not working.
    Any idea what I should do pls?
    thx
    Jack

    OK, I made a mistake into the line:
    Adding :
    AddVMOption -Duser.timezone="+01:00"
    in ide.conf works fine.
    I just forgot to close and reopen JDEV.

  • Object library invalid or contains references to object definitions that could not be found problem

    Hello,
    Yesterday I got the following error on the server: "object library invalid or contains references to object definitions that could not be found problem".
    I found this documentation, followed the steps and all was OK on the server:
    http://support.microsoft.com/kb/2703186/en-us
    https://social.msdn.microsoft.com/Forums/office/en-US/e94f2fc3-71f1-4dad-bbf1-37f906e28e8e/object-library-invalid-or-contains-references-to-object-definitions-that-could-not-be-found?forum=exceldev
    Our server is used to do batch processing for refreshing our excel's. This morning, after the excel's got refreshed on the server, I've got this error on the
    client computers (everything works fine on the server computer). I did the steps above on the client computers, but the problem still persists.
    It looks like there is a difference in version between server and client.
    If I do the refreshing on the same computer there is no problem. But when the server does the refreshing and I try to open it on a different computer, I get this error.
    The security update has been removed from the computer, but I can't use my excel's anymore.
    Does any one have some advice for me?
    Best regards,
    Wouter

    Hi Wouter,
    Thanks for the further explaintation.
    According to the description, the issue seems that the Workboook on the client side(with lower Excel version) couldn't run the VBA after it opened by server(higher version Excel application).
    If I understood correctly, that sounds that the issue is relative to the specific version of Excel product or the updates.
    I suggest you contacting Microsoft support to raise an incident so that our engineer could work closely with him to identify the root cause and resolve this issue as soon as possible.
    If the support engineer determines that the issue is the result of a bug the service request will be a no-charge case and you won't be charged.
    Please visit the below link to see the various paid support options that are available to better meet your needs.
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Extremely slow internet... MAC's or modem's problem?!

    My Macbook is only 1 week old, so I'm an absolute beginner at dealing with macs, please help! Thank you very much for reading
    I have two houses, one with Verizon Fio modem (almost 1yr old), one with Verizon DSL (4-5yrs old), both with Linksys G Routers. The mac connects perfectly with Fio, yet when I go to my other house with DSL, everything went downhill.
    When I first turn on the modem and the router, internet works fine for about 10 seconds, then it gradually slows down until I can no longer access internet. However, my family's Vistas and XP work just fine. I looked for solutions online, tried adding new DNS servers, tried turning off IPv6, nothing worked.
    I called an Apple Expert, who told me to plug the modem directly into the mac. I turned off the modem + router, turned them on again, and connected the modem and the router to the mac, one at a time. At first my internet went back to normal speed, but after a while it slowed down again. I don't think connecting anything directly to the mac helped, the speed probably went back to normal just because I restarted the modem and the router.
    According to the apple expert, the DSL has "gotten used to recognizing" the PCs, so when a new mac comes in, it cannot respond as well to it. He told me to call Verizon to get a new modem.
    My dad is a computer programmer, and was quite doubtful of what apple told us. Over the past 5 years, the DSL has connected to 5-6 old and new PCs, but did not have any problems with them. If the modem really cannot respond well to new computers, then mine and my dad's 1 yr-old Vistas shouldn't work well with it, right? But they work perfectly fine.
    Right now I have no idea what the problem is. It doesn't seem like the mac has any problem, because it connects well with other networks (as with the Fio). It doesn't seem like it's the modem's problem neither, because it connects fine with other old and new PCs.
    I'm about to contact Verizon, but I'm very reluctant to get a new modem, especially when I'm not even sure if that's where the problem is...
    Please help...THANK YOU SO MUCH!

    ruif61 wrote:
    My Macbook is only 1 week old, so I'm an absolute beginner at dealing with macs, please help! Thank you very much for reading
    When I first turn on the modem and the router, internet works fine for about 10 seconds, then it gradually slows down until I can no longer access internet. However, my family's Vistas and XP work just fine. I looked for solutions online, tried adding new DNS servers, tried turning off IPv6, nothing worked.
    I called an Apple Expert, who told me to plug the modem directly into the mac. I turned off the modem + router, turned them on again, and connected the modem and the router to the mac, one at a time. At first my internet went back to normal speed, but after a while it slowed down again. I don't think connecting anything directly to the mac helped, the speed probably went back to normal just because I restarted the modem and the router.
    According to the apple expert, the DSL has "gotten used to recognizing" the PCs, so when a new mac comes in, it cannot respond as well to it. He told me to call Verizon to get a new modem.
    You were told pure hogwash by that "expert." Whoever it was knows nothing about computers. "Getting used to" indeed. Only in the movies.
    My dad is a computer programmer, and was quite doubtful of what apple told us.
    Your dad is smarter than that "expert"
    Over the past 5 years, the DSL has connected to 5-6 old and new PCs, but did not have any problems with them. If the modem really cannot respond well to new computers, then mine and my dad's 1 yr-old Vistas shouldn't work well with it, right? But they work perfectly fine.
    The issue you have is typical - XP, Tiger etc all connect OK but Leopard does not. The usual fix is to update the router firmware. You say the router is 4-5 years old. I suspect that is the problem. You have to find out how to update the firmware. My old Verizon DSL router had the same issues until I updated the firmware, back when I first installed Leopard. It was a Westell modem and I needed to use my PC to update the firmware.
    Check with your DSL ISP or go to the website of the modem/router manufacturer and get the instructions and download and install the firmware update. If this does not solve your problem, it will eliminate the main culprit. It's also possible that the router is simply too old, period.
    Message was edited by: nerowolfe

  • Hai team,  I found problem on iPhone 4S IOS 6.1.2 , whether this is bug?? Or normal?? I see "time since last full charge" can't showing time. Sory if my english very bad.

    Hai team,
    I found problem on iPhone 4S IOS 6.1.2 , whether this is bug?? Or normal?? I see my iPhone in setting->general->usage "time since last full charge"!!! Can't showing time.
    Sory if my english very bad
    Sent from iPhone

    A good read. Have you done anything at all to resolve your problem. Reset? Restore?
    By the way - "your products"... nobody here produced the iPhone, we are all just users. Apple is not here.

  • 6133 no modem found

    I have US tmobile 6133
    When I try to connect to the internet via PC SUITE it says no modem found. When I go to settings, it asks for dial up modem settings. How can I connect to the internet?

    Operating system:
    Microsoft Windows XP
    Build 2600
    Service Pack 2
    Language: English
    Language for non-Unicode programs: English
    Locale: English
    Input language: English
    Nokia PC Suite:
    Version 6.83.14.1
    Language: English
    Connectivity Cable Drivers:
    Version 6.84.4.0
    PC Connectivity Solution:
    Version 7.22.7.1
    Bluetooth stack:
    WIDCOMM Bluetooth stack
    Version 5.1.0
    Build 1700

  • DKU5 - No modem found!

    I have a Nokia 6810 and a DKU5 cable.
    I've installed the DKU5 driver and then PC Suite and finally connected my phone.
    PC Suite happily talks to the phone, but when I select 'Connect to the Internet' I get the 'No modem found!' error in 'One Touch Access'.
    I've tried uninstalling everything, running 'Nokia PC Clean' and reinstalling and get the same error.
    What next?
    Richard

    have you right clicked on it ans selected update driver ?
    If it turns out that it does not help, my conclusion would be that the non-Nokia Dku-5 does not handle modem.At least it is not compatible with the Nokia DKU-5 cable driver that you have downloaded, but you should try to find the original driver that should be available for the DKu-5 you have.

  • GPRS Problem - No Modem Found

    I have installed PC suite 6.81 onto an XP Pro SP2 laptop and am connecting a Nokia 7250i via a genuine Nokia DKU-5 lead. The PC Suite indicates the phone is connected via the serial cable but when I try and connect to the internet, one touch access states that no Nokia modems are installed. I have checked device manager and both the Nokia Connectivity Adapter Cable DKU-5 and the Port on the Nokia Adapter are detected and are working properly. The same phone, cable and software installs on a W2K SP4 laptop and connects without any problems. The only difference I can see is that the Nokia 7250i cable is detected in device manager under modems on the W2K laptop and not on the XP laptop. I have tried uninstalling and re-installing PC suite several times and used the Nokia cleaner utility to remove all traces of the programme between installs. I have also tried installing the modem driver seperately but still am unable to get the the XP laptop to recognise the Nokia modem in one touch access. Does anyone have any ideas/suggestions

    When you check the One Touch Access settings for modems list, do you see your phone listed there ?
    In device manager, when phone connected, do you see the phone in modems list ?

  • 2811 modem disconnecting problem

    Hi there am having an issue with digital modems disconnecting on a cisco 2811. The router has PVDM2-36DM card and hwic-1ce1t1-pri E1 interface installed.
    The E1 is up and I can dialout but the calls drop after 24-30 secs.
    I have issued the debug modem csm and the following output is shown.
    ebug modem s csm
    Modem Management Call Switching Module debugging is on
    Dial_SRV#
    *May 16 12:13:37.495: Modem 0/322 CSM: received ASYNC_DTR_UP for line 322
    Dial_SRV#
    *May 16 12:13:40.455: CSM: csm_modem_event called
    *May 16 12:13:40.455: Modem 0/322 CSM: Called Number Rcvd = 07879605414
    *May 16 12:13:40.455: Modem 0/322 CSM: Dial String to be processed (07879605414)
    *May 16 12:13:40.455: Modem 0/322 CSM: End of Dial String
    *May 16 12:13:40.455: Modem 0/322 CSM: (CSM_PROC_IDLE)<--MODEM_DIAL_OUT
    *May 16 12:13:40.483: CSM: csm_modem_event called
    *May 16 12:13:40.483: Modem 0/322 CSM: (CSM_PROC_OC_ISDN_PROCESSING_CALL)<--CSM_EVENT_MODEM_SETUP
    *May 16 12:13:40.627: CSM: MODEM_REPORT from 0/0/0:11, call_id=0x800A, event=0x3, cause=0x0, dchan_idb=0x462427A0
    Dial_SRV#
    *May 16 12:13:40.627: Modem 0/322 CSM: (CSM_PROC_OC_ISDN_PROCESSING_CALL)<--ISDN_BCHAN_ASSIGNED
    Dial_SRV#
    *May 16 12:13:45.443: %ISDN-6-CONNECT: Interface Serial0/0/0:11 is now connected to 07879605414 N/A
    Dial_SRV#
    *May 16 12:13:45.443: CSM: MODEM_REPORT from 0/0/0:11, call_id=0x800A, event=0x4, cause=0x0, dchan_idb=0x462427A0
    *May 16 12:13:45.443: Modem 0/322 CSM: MODEM_REPORT rcvd DEV_CONNECTED for call_id 0x800A
    *May 16 12:13:45.443: Modem 0/322 CSM: (CSM_PROC_OC_ISDN_CONNECT_PENDING)<--ISDN_CONNECTED
    technolog_Dial_SRV#
    *May 16 12:13:59.851: CSM: csm_modem_event called
    *May 16 12:13:59.851: Modem 0/322 CSM: (CSM_PROC_WAIT_FOR_CARRIER)<--MODEM_CONNECTED
    Dial_SRV#
    *May 16 12:14:09.903: Modem 0/322 CSM: (CSM_PROC_CONNECTED)<--ASYNC_DTR_DOWN
    *May 16 12:14:09.983: CSM: csm_modem_event called
    *May 16 12:14:09.983: Modem 0/322 CSM: (CSM_PROC_DISCONNECTED)<--MODEM_DISCONNECTED
    *May 16 12:14:09.983: Modem 0/322 CSM: Stopping dm tone timer
    *May 16 12:14:09.987: Modem 0/322 CSM: (CSM_PROC_DISCONNECTED)<--QUEUED_DISCONNECT
    *May 16 12:14:09.987: Modem 0/322 CSM: Stopping dm tone timer
    *May 16 12:14:09.987: Modem 0/322 CSM: CSM_MODEM_DEALLOCATE: modem is deallocated
    *May 16 12:14:09.987: CSM: called_party_num '07879605414'
    *May 16 12:14:09.987: Modem 0/322 CSM: (CSM_PROC_IDLE)<--ASYNC_DTR_DOWN
    *May 16 12:14:09.987: %ISDN-6-DISCONNECT: Interface Serial0/0/0:11 disconnected from 07879605414 , call lasted 24 seconds
    Dial_SRV#
    *May 16 12:14:10.063: CSM: csm_modem_event called
    *May 16 12:14:10.063: Modem 0/322 CSM: (CSM_PROC_IDLE)<--MODEM_DISCONNECTED
    *May 16 12:14:10.151: CSM: MODEM_REPORT from 0/0/0:11, call_id=0x800A, event=0x0, cause=0x0, dchan_idb=0x462427A0
    *May 16 12:14:10.151: CSM: MODEM_REPORT rcvd DEV_IDLE for call_id 0x800A, modem not found due to wrong b channel number or b channel is deallocated
    *May 16 12:14:10.987: Modem 0/322 CSM: received ASYNC_DTR_UP for line 322
    Dial_SRV#
    What stands out is the following line 'modem not found due to wrong b channel number or b channel is deallocated'
    I have attached the full config and in it I have configured the time-slots 1-12,16 This is because the organisation does not have the full E1 but only first 12 channels 16 is the d channel.
    Any assistance would be much appreciated
    Thanks

    Hello folks,
    I have found the problem.It seems that the software being used on the server to dial out to the remote devices required a modem initialisation string.
    We tested dialing out with a normal windows dialup connection and this work perfectly.

  • E71 - No WLAN Network Found Problem

    Hi,
    I have been using my Nokia E71 from 3 network for 3 months without any problem, my phone connects to Wireless network at my home and browse in internet will full speed.
    I have been installing some software, after which problem started, my phone search for wireless network and says "No WLAN Network found".
    I tired soft reset, hard reset and even I resintalled phone software through Nokia software update but still this problem not resolved.
    If anyone faced this same problem and found solution, can you please share the procedure to fix this WLAN network problem in this topic.
    Thanks,
    Maha

    I too get a similar problem.
    It was OK up until recently, at home. But for some strange reason - when I connect to the internet via my access point, it sometimes doesn't find it, or says no WLAN found, even though the router is in the room directly upstairs.
    However the iPod Touch I have also gets a similar problem, and a weak signal in some places, the router was on top of my Aluminum Desktop PC so I thought it could be that, having moved it, it made no difference.
    I have a NETGEAR DGN2000 wireless draft-N modem/router. I think it could be the "Draft-N" that could be causing the problem. Although I have not fully ruled out the handset, and it could be the latest firmware. For me I have not bottomed this out, either to the phone or router, but am inclined to think its more the router.
    If yours is a draft-N router it might be worth switching it to 802.11b/g mode only and try that. I shall try when my new E72 arrives next week
    Shunts...
    Message Edited by shuntfield on 15-Nov-2009 02:22 PM
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • KT4V MS-6712 Modem Install Problem

    Hi everyone,
    I've just got a KT4V(MS-6712) board and finally got it to work with the 2400XP and 2xPC700 256mb RAM.  (It woudn't take a 512mb stick).
    My problem is I cannot install my v92 or v90 modem.  When I go through the usual procedure in the Hardware Wizard, I get an "Error occurred" message at the very end of the installation in the wizard.
    I've tried the modems in another motherboard using the same procedure of installation and everything works fine. I've also installed a TV card in the PCI slot to see if there was a problem with the slots, but it installed ok.
    Could some please guide me in the right direction?  I'm I missing somthing here, a BIOS setting or something?  Could it be a serial conflict?  
    Thanks in advance, mrnickyp

    posted originally by yellowman here
    Quote
    Thank you to all who helped me through these strange issues. I found out what the issue was. These are the steps: (this is off another newsgroup)
    This applies to any type of PCI card eg ethernet cards, modems, etc
    etc. and XP and Windows 2000.
    PROBLEM: After installing new card in a PCI slot, get "invalid data"
    error message and the drivers refuse to install. The card is
    correctly identified by the system and the drivers found are MS
    certified. Not sure why this happens, but at a guess, this problem
    seems to occur when installing XP or W2K and many PCI slots are still
    unused. XP and W2K for some dumb reason then appear to "protect" these
    unused PCI slots by making them "READ ONLY" in the registry.
    SOLUTION: After mucking around for many hours trying to reset bios
    settings for PCI cards, trying to re-install XP etc, finally came
    accross the solution. Thanks to MarkS whoever he is for finding this.
    STEP 1 - Start, Run... and type "regedt32" without the quotes to run
    the Registry Editor. (Regedit wont work!)
    STEP 2 - Navigate to
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\ENUM\PCI
    STEP 3 - you will see a number of keys of the form "VEN_xxxx", where
    xxxx are
    strings like "1102&DEV_0004&SUBSYS_00011103&REV_04". Under each of
    these
    folders will be another folder with a long numerical name. Open each
    long numerical name folder and look in RHS window for the "DeviceDesc"
    which matches the hardware you are trying to install.
    STEP 4 - Once you have found the right one for your problem device,
    navigate back up to the VENxxx level for that device, Right Click on
    the "VEN_xxxx" for that device and select 'Permissions'. You should
    notice that the permissions are set to READ ONLY. Then tick "Allow"
    for "Full Control".
    STEP 5 - Close Regedit and then continue with the installation of your
    device, ie go back to Control Panel, Add new hardware and preferable
    use the wizard to try and detect the hardware again, or do it manually
    and use your driver disk.
    STEP 6 - The PCI hardware should install now with no problems.
    After downloading the latest drivers and installing that, the sound card worked successfully. Oh, and lynux, I believe you are correct, the pci input device was for the firewire.
    This worked for me, now I just need to ensure that the USB bracket works. (any more ideas?)
    -> addition: USB works. Tried it and everything was detected right away...
    again... thanks so much for everyone's help.

Maybe you are looking for